Used Giardina High-Temperature Dryer for sale (26,462)

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Njdpoz I Tt Iofx Ab Ajdc Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Condition: ready for operation (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: 070079A, total height: 4,500 mm, total length: 5,400 mm, total width: 5,500 mm, pressure: 6 bar, control cabinet height: 2,000 mm, control cabinet length: 2,500 mm, control cabinet width: 500 mm, operating temperature: 25 °C, working height: 950 mm, heating capacity: 107 kW (145.48 HP), number of seats: 66, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,350 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, emergency stop, Giardina drying oven, manufactured in 2007 with three different climate zones: evaporation zone - heating zone - drying zone Mobile pallets with conveyors, therefore no minimum size requirement for components Nodpfezcnu Hox Ab Aodc Continuous vertical conveyor system

Condition: used, Nabertherm High-Temperature Furnace 1600 °C The HT 08/16 to HT 450/18 high-temperature furnaces have proven their worth in laboratory and production environments for many years. Whether for quartz glass, glass ceramics, sintering CIM components, or other processes up to a maximum temperature of 1800 °C, these furnaces provide the optimal solution for the sintering process. Thanks to their robust design in a compact benchtop model, these high-temperature furnaces are suitable for laboratory processes where the highest precision is required. Excellent temperature uniformity and well-thought-out details set unsurpassed quality standards. Tmax 1600 °C Double-walled housing with fan cooling, resulting in a low external wall temperature Heating from both sides via molybdenum disilicide heating elements High-quality fiber insulation with special back insulation Side insulation, made up of tongue-and-groove blocks, ensures low heat loss to the outside Durable ceiling insulation with special suspension Parallel pivoting door with chain guide for defined opening and closing of the door Labyrinth seal ensures the lowest possible temperature losses in the door area Exhaust vent in the furnace ceiling Control of the heating elements via thyristors NTLog Basic for Nabertherm controllers: Recording of process data with a USB stick Maximum temperature: 1600°C Internal dimensions (mm): 200x200x200 External dimensions (mm): 830x370x590 Volume (L): 4 Connected load (kW): 5.2 Ndjdpewxwa Eofx Ab Aec Electrical connection: 3 phases Weight (kg): 150 More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 04493, functionality: fully functional, temperature: 1,100 °C, inner dimension length: 2,000 mm, inner dimension width: 480 mm, inner dimension height: 300 mm, The item is offered as a "Premium Listing" – the sale is qualified and curated by Maschinensucher. Used in accordance with applicable guidelines and maintenance recommendations in a large German corporation. High-performance high-temperature furnace for industrial heat treatment and manufacturing processes. Nsdpfx Abszyf Tae Ajdc TECHNICAL DETAILS Maximum temperature: 1,100 °C Heating chamber (L × W × H): 2,000 × 480 × 300 mm MACHINE DETAILS Electrical connection: 380 V Fuse rating: 125 A Power: 35 kW Dimensions (L × W × H): 2,500 × 1,000 × 1,700 mm Connection: III EQUIPMENT Mounted on a chassis with rollers CE marking Note: EXW – Buyer is responsible for organizing disassembly and loading.

Condition: used, heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan ultimate vacuum: 10 mbar exhaustion time: ca. 5 min Ndedpfx Asv Sbc Eeb Aoc nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar

Condition: excellent (used), High temperature debinding furnace, make GERO type: HBO 50/13-3 2G Ndsdpehgiz Isfx Ab Asc heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar

Year of construction: 2022, condition: used, A new, unused EVG Lufttechnik high-temperature centrifugal fan is offered. Volume flow: 245m³/h, max. speed: 5270rpm, max. medium temperature: 500°C, total pressure difference: up to 6172Pa, motor power: 1.5kW, voltage: 230/400V, efficiency class: IE3, degree of protection: IP55, weight: approx. 165kg. With Motovario electric motor and V-belt drive. Documentation fully available. Nodpoz Dki Eefx Ab Aodc

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 060308, functionality: fully functional, power: 6.9 kW (9.38 HP), input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 40 °C, number of chambers: 1, control type: PLC-controlled, Equipment: CE marking, documentation/manual, GIARDINA MOS® 3D Static Microwave Drying Chamber Professional static drying system designed for the drying of coated wooden components, particularly for water-based coatings. The GIARDINA MOS® 3D technology uses microwave energy for controlled and homogeneous three-dimensional drying. After removal of the water component from the coating, a low-temperature hot-air circulation phase completes the drying and curing process. The system is suitable for three-dimensional and assembled wooden components, including furniture, chairs, window and door components, profiles and turned parts. Technical data: Manufacturer: GIARDINA FINISHING S.r.l. Model: MOS® 3D Year of manufacture: 2006 Serial number: 060308 Electrical power: 6.9 kW Supply voltage: 400 V Frequency: 50 Hz Rated current: 19 A PLC controlled Air recirculation motor: 3 kW / 4 HP CE marked Original operating and maintenance documentation as well as electrical diagrams are available. Njdpfx Aoztvf Tsb Aedc The machine was recently taken out of production and is currently dismantled and stored in a dry warehouse. It was in regular operation prior to being taken out of service.

Condition: new, High temperature chamber furnace, make VEI Nedpodyvkyjfx Ab Aodc max. temperature: 1.200°C useable dimensions (w x h x d): 2750 x 500 x 1.100 mm heating power: electrically, 42 kW

Condition: like new (used), Year of construction: 2021, Kaeser Secotec TE 142 Refrigeration Dryer YOM 2021 Serial number: 149-8393351 16 Bar 3-60 degrees C Refrigerant R513A Flow rate: 14.50 m3/min - 14500 l/min Total width: 712 mm Njdoyy U I Nspfx Ab Aedc Total length: 982 mm Total height: 1,612 mm Overall weight: 249 kg Kaeser compressed air dryers ensure dry, optimal compressed air for all flow rates. Built as high-quality industrial machines, they reliably protect your system and processes from condensation damage, even under extreme conditions.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 Ndodpfx Asq Igyveb Asc 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: new, High-temperature resistant corrosion protection and temperature-resistant special electrode Manufacturer: Capilla Type: 521 E HL Diameter: 2.5 mm Length: 350 mm Ndjdpfx Abohhykie Asc Weight: 5 kg

Condition: excellent (used), functionality: fully functional, Granulate dryer with two drying containers, including KOCH material conveying equipment and suction lance. For sale is a used drying system for plastic granules with two drying containers and associated material conveying equipment. The system was used at an injection molding company for pre-drying PA6. Njdpfxe Afb Als Ab Aodc Equipment and scope of delivery: - Two insulated drying containers on a common steel frame - One KOCH-TECHNIK vacuum conveying unit mounted on each container for material feeding - Large side cleaning openings with a sight glass for level monitoring - Material outlets at the bottom of the containers - Analog temperature indicators at the air connections - Separate drying unit with fan, filter, and control cabinet - Digital temperature controller GOSSEN D1 - Control panel with operating and fault indicators, as well as indicators for drying and regeneration - Existing air piping and connecting hoses - Suction lance with conveying hose The side cleaning openings provide good access to the inside of the container. Drying containers and drying unit are mounted on separate steel frames. Condition: Used, with visible signs of wear and tear due to age and use. Scope of delivery as described and shown in the pictures.

Condition: ready for operation (used), Year of construction: 2007, A 4-level vertical dryer Giardina with a paternoster system for water-based and solvent-based coatings with flash-off, heating and drying zones is available. Workpiece length range: 300mm-3200mm, workpiece width range: 0mm-1350mm, workpiece height range: 0mm-80mm, working height: 950mm, door arrangement: vertical, number of doors: 16, number of trays: 66, levels: 4, accessibility: all sides, number of heating coils: 3. Machine dimensions X/Y/Z: approx. 5350mm/7550mm/6550mm, electrical cabinet dimensions X/Y/Z: 2500mm/500mm/2000mm. Documentation available. An on-site inspection is possible. Nodpjzqu Hksfx Ab Ajdc

Year of construction: 2026, condition: used, CORMAK Compressed Air Dryer is a professional industrial device designed for effective removal of moisture, water vapour, and oil particles from compressed air systems. Thanks to advanced refrigeration technology, the refrigerated air dryer ensures stable operation of compressed air-powered equipment, extending their service life and improving reliability. It is an ideal solution for companies looking for modern compressed air treatment methods in pneumatic installations. Main advantages of the CORMAK compressed air dryer Advanced refrigeration system — the two-stage air cooling process down to the dew point ensures effective separation of moisture and oil particles. Stable operation in systems up to 10 bar — the device is designed for standard industrial compressed air installations. High efficiency — capacity of up to 2800 l/min makes the dryer an effective solution for medium and large compressed air systems. Energy-saving design — the use of a variable-speed fan reduces power consumption to only 0.58 kW. Automatic condensate drain valve — ensures reliable removal of condensate without the need for operator supervision. Ndjdpfs Adyw Eex Ab Aoc Compact dimensions and easy installation — ideal for upgrading existing pneumatic systems. Safe R134a refrigerant — provides high operating efficiency while meeting modern environmental standards. Design and technology The refrigerated compressed air dryer has been designed for maximum efficiency and durability. Its main structural components include: 1. Air-to-air heat exchanger During the first stage of the process, incoming compressed air passes through a heat exchanger, where it is pre-cooled by colder air leaving the evaporator. The counterflow design improves heat recovery and increases the overall energy efficiency of the system. 2. Refrigeration system evaporator During the second stage, compressed air enters the evaporator, where it is cooled to a dew point temperature of 3°C. This causes the water vapour and oil particles contained in the air to condense. 3. Condensate separator After cooling, the mixture of air and condensate enters a high-efficiency separator, where condensed water and oil are separated and automatically discharged outside the unit. 4. Fan control system Variable-speed fan technology enables intelligent adjustment of cooling intensity according to actual operating requirements. This reduces energy consumption and increases the service life of system components. Equipment included Automatic condensate drain valve Integrated water and oil separator Variable-speed fan with automatic adjustment to operating conditions Electronic control system ensuring stable operating parameters Compact and durable housing resistant to industrial environments Technical specifications Parameter Value Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Capacity 2800 l/min Power consumption 0.58 kW Supply voltage 230 V Dimensions (L × W × H) 420 × 700 × 690 mm Weight 37 kg Refrigerant type and quantity R134a, 550 g WARNING!!! This machine is a customer return. Damaged housing, numerous scuffs and dents. NO WARRANTY OR RETURNS!

Condition: good (used), Year of construction: 2003, 2 units of Giardina painting systems Year of manufacture from 2003 to 2009 Roller coating machine UV dryer 1 UV dryer 2 Roller coating machine, type G95/05 Baby, with GST UV dryer with 2 irradiation units UV dryer GST 1400/2 Ndsdpfxozlq Uto Ab Aoc

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Nsdpfx Abjq Nfuzs Ajdc Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: good (used), Year of construction: 2009, For sale GIARDINA MOS/4PLUS paint line Nedpfxotxnp Ne Ab Ajdc

Condition: excellent (used), DIGITAL PRINTING LINE. Consisting of: a) ‘DOUCET’ Mod. CR-1.9-30.60 motorised roller feed b) “UNIVERSAL ROBOT” loading robot, Mod. UR 10 c) “WANDRES” cleaning machine, Mod. X 121/600/1200 d) “GIARDINA” rollers coating machine, Mod. G02/05 e) “GIARDINA” UV dryer, Mod. GST 140/1/2 Plus f) “GIARDINA” motorised roller conveyor, Mod. BRI/3000 g) “CARMICHAL” pressurised chamber h) “ATLAS COPCO” screw compressor, Mod. G4 FF h) “PROJECTA” digital printing machine, Mod. Evo 8 (max. 8 printheads) i) “GIARDINA” motorised roller conveyor, Mod. BRI/5300 l) “GIARDINA” rollers coating machine, Mod. G02/05 m) “GIARDINA” UV dryer, Mod. GST 140/1/2 Plus n) “GIARDINA” motorised roller conveyor, Mod. BRI/3000 Ndjdpjzxpdgofx Ab Ajc o) “WEBER” labelling machine, Mod. 4300 R.H. (pro Apply) p) “FANUC” unloading-stacking robot, Mod. M-20iD/25 with "DOUCET" motorised roller conveyor

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: SLHJ-120LK/100, functionality: fully functional, operating hours: 10 h, power: 10.85 kW (14.75 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 1,320 mm, total width: 840 mm, total height: 1,680 mm, fuel type: electric, Equipment: CE marking, documentation/manual, SML SLHJ-120L-100 dry air dryer, compact design. Combines drying, dehumidifying, and transporting of granules. Suitable for hygroscopic plastics and optical applications. Technical specifications: - Drying hopper capacity: 120 L - Drying rotor air volume: 100 m³/h - Drying heating power: 5 kW - Drying blower: 0.75 kW - Regeneration blower: 0.18 kW - Regeneration heating: 3.2 kW Nedpfxs Ad Ey Ej Ab Ajdc - Transport blower (vacuum): 1.1 kW - Pipe diameter: 38 mm - Dimensions (L x W x H): 1265 x 850 x 1680 mm - Weight: 324 kg Features: - Closed dehumidification circuit; dry air does not come into contact with outside air - Closed transport system; dried material does not absorb moisture during transport - Shut-off valve in the transport pipe; no residual material remains in the pipe - Double-walled, insulated drying hopper - Heat exchanger for low temperature and dew point of the process air Available for immediate delivery from stock in the Netherlands.

Condition: used, Labotek Ndodpfx Aszii Dbob Aec Type: FMD-M-M-15-15-V, Model 101134 The Labotek FMD-M-M-15-15-V model belongs to the FMD-M series from Labotek, a leading manufacturer of systems for material drying, dosing, and conveying in the plastics industry. The FMD-M series includes modular dryers designed for processing plastic granules. Technical specifications of the FMD-M series: Type designation: FMD-M 15/15 Dimensions: 80 x 120 x 120 cm Net weight: 88 kg Shipping weight: 113 kg Shipping dimensions: 80 x 120 x 120 cm Shipping volume: 1.15 m³ These dryers are designed for processing plastic granules and are characterized by their modular design, which allows for flexible adaptation to various production requirements. Volts: 3x400 Vac+PE Amps: 10.4 Amps Overcurrent protection: 16 Amps kW: 2.6 kW HZ: 50/60HZ The Labotek AVR3G is an industrial vacuum conveyor with a capacity of 1 liter, designed for the automatic conveying of free-flowing plastic granules. It is particularly suitable for small to medium-sized production facilities where space and weight are critical. Technical data of the Labotek AVR3G (1 liter): Capacity: 1 liter Conveying capacity: Up to 15 kg/h Conveyed medium: Free-flowing, granular raw material (minimum grain size of 3 mm) Operating noise level: Below 69 dB Material contact surfaces: Stainless steel AISI 304 Maximum material temperature: 80 °C Alarm function: In case of material shortage Power supply: Compatible with 50/60 Hz Weight: 88 kg Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier YOM 2012 Capacity: 4,200 l / min Ndedpfeyzaamjx Ab Ajc Pressure dew point: -40 ° C Pressure drop: 0.16 bar Maximum operating pressure: 14.5 bar Filter sizes: DD / PD 60 - DDp 60 Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm inlet air temperature: 35 ° C ambient temperature: 25 ° C operating pressure: 7 bar

Condition: used, Second-hand New eco-tec ALLin DRYer belt dryer for drying wood chips for the production of briquettes. Possible products: Separated fermentation substrate (fine-textured, air-permeable, frost-free, free from foreign matter, fully fermented; base material: maize silage, slurry, cereals, ≥30% dry matter) Nsdjzzk H Uspfx Ab Aedc Wood chips G30 (free-flowing, air-permeable, frost-free, > 0°C, low in resin, free of coarse material, free of foreign matter) Technical data: - Heating medium: Hot water 90°C flow / 70°C return - Heating capacity: ~ 400 kW - Drying temperature: approx. 80 °C at 90° flow - Weight: ~ 12 t

Condition: used, Autotherm Type: Autotherm AW 95-12/VK/E temperature control unit Autotherm AW95-12_VK temperature control unit for water/glycol temperature control (fully overhauled) Autotherm AW temperature control unit: For highly precise temperature control of water Autotherm temperature control units are used in various areas of industry, research, and laboratory applications. Ndjdpfjzhkb Eex Ab Aoc Temperature control units, for example, supply tools, open baths, double-walled containers, heat exchangers, and heating chambers with temperature-controlled water to maintain them at the desired temperature with high precision. Application areas: Mechanical engineering, for example, in the solar and wind power industry, textile industry Plastics processing Chemical and pharmaceutical industries Paper manufacturing Medical technology Food industry Research Autotherm AKW AW95-12/VK temperature control unit Temperature range: RT°C / +95°C Heating capacity: 12.0 kW Cooling capacity: 18.0 kW Passive cooling system via heat exchanger / connection to a cooling water network required Rated power: 14.5 kW Dimensions: 600 mm x 840 mm x 910 mm Power consumption: 400 volts / 50 Hz 13400 watts, 19.6 A, 5.1 bar Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Trumpf TRUMPF TruDisk 6602 (4 C) High-performance disk laser with up to 6.6 kW   Type: TruDisk 6602 (4 C)   The TRUMPF TruDisk 6602 (4C) is a high-performance disk laser with approximately 6.6 kW continuous power – perfectly suited for welding, cutting, and surface treatment processes on metals such as steel, aluminum, copper, etc.   System type: TruDisk 6602 (4 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: November 2012 Drawing number: 20-10-02-A5   No further testing was carried out in-house. Ndedpfxszii D Is Ab Aoc The operating hours could not be read. The laser ran perfectly until the end.   Key technical features: Power: 80 W to 6600 W continuously adjustable, max. 6.6 kW machine tools Beam quality: < 2 mm·mrad for excellent focus handling Wavelength: 1030 nm (infrared), also adapted for green wavelength in special models Output options: Up to 4 laser outputs (4C) for simultaneous supply to multiple process cells Cooling system: Integrated heat exchanger (up to 28 °C inlet temperature), optional compressor cooling (up to 38 °C) Modular and service-friendly: Compact design (< 1 m² footprint), modular components for fast service   Advantages & Applications Maximum process stability: Real-time power control ensures reproducible results Reflection resistance: Patented resonator design allows welding of reflective metals such as copper/aluminum Industry 4.0-capable: Sensor-integrated monitoring system, OPC-UA interface for condition monitoring & predictive maintenance Energy efficiency: Up to 50% less power consumption thanks to intelligent pulse control and energy-saving modes Versatility: Applications range from welding (also BrightLine for virtually spatter-free results) to cutting, hardening, casting processing, additive manufacturing, laser wire arc welding, etc.   Suitable applications: Ideal for industrial high-power laser applications: Application Features Manufacturing of automotive structural components Deep welding with high reproducibility Copper welding Particularly suitable with green wavelength (> 95 % spatter reduction) Remote hybrid welding Fast processing of large areas with a robust beam Additive manufacturing & hardening Suitable due to beam quality & compact design   Key technical data Property Laser power Up to 6,600 watts (6.6 kW), continuous Beam quality < 2 mm·mrad Wavelength 1030 nm (infrared) Number of outputs (4C) Up to 4 parallel usable fiber outputs Fiber connection diameter 100–600 µm (depending on configuration) Beam guidance Fiber-based, passive (no beam steering mirrors required) Cooling Water/air-cooled, internal or external chiller Dimensions Approx. 1000 × 800 × 2100 mm (W×D×H, depending on the version) Weight ~800–1200 kg (without cooling) Power supply 380 V - 10 % ... 460 V +10 %, 3AC + PE 38 kW / 41kVA 59 A / 400 V 50... 60 Hz Control TruControl 1000/3000, OPC-UA interface Safety standards Laser protection class 4 according to EN 60825-1   Weight: approx. 1200 kg   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.