Used Gebr. Baier Kg Embossing Press for sale (73,915)

Condition: good (used), Year of construction: 1973, machine/vehicle number: 73040, Embossing press Baier GEBA 1/F, installation height 90 mm, pressure capacity 800 kg, working size 10cm x 14 cm, built in 1973, machine number 73040, in good condition, immediately available If you are interested, we would be happy to inform you about other machines in our company. You are welcome to view the machine in our company by prior appointment. Pjdpfx Aevt Rpqjmyjgp

Year of construction: 1984, condition: ready for operation (used), Distance between the uprights: 4300mm, cutting length: 4050mm, blade length: 4200mm, cutting angle adjustable: 1.5-2.5°, min./max. strip width with front gauge: 40mm, min./max. strip width with rear gauge: 1000mm, table height above floor: 850mm, table length: 4200mm, table width: 650mm, with 3 extension arms each 500mm, internal distance between cutting blade and hold-down plus 10mm: 35mm, lower blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, upper blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, guide rulers for square cuts: 1 piece, accessories/special equipment: gauge adjustment, table extension, sheet metal chute, side gauge 1000mm, cutting line illumination, with documentation. An on-site inspection is possible. Podpfx Asy U Nqbemyegp

Year of construction: 2020, operating hours: 2,500 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 26858, A complete set is available for sale. The set consists of the following units: Pellet press 33-390 – the dimensions can be found in the accompanying documentation. The throughput rate is up to 500 kg/h – depending on the material and material density. Drive motor 30 kW. The die has a size of 3.0 mm. Spare parts: 4 dies and 2 rollers Conveying system: Z-conveyor – bucket conveyor, track width 298 mm from Wiese Förderlelemte in cooperation with Amandus Kahl. 3400 mm horizontal at the bottom, 5300 mm vertical, and then 2340 mm horizontal. Dimension sheet included. Material cooler (Pos. 1): is a cylinder with a fan that blows ambient air into the cone, volume approx. 1 m³. Pellet sieve (Pos. 2) / screener manufactured by Gough Engineering for separation of fines, oversized pellets, and product classification. Screen size 3.2 mm. Pgjdozl Tlzspfx Amyep Control cabinet: is included. The basic control system (without power electronics) is manufactured by Kahl and complies with CE regulations at the time of manufacture. The power unit is manufactured in Israel and may not comply with CE regulations. Both control cabinets will be supplied; commissioning and compliance with all regulations are the responsibility of the seller. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered ex-works at a port or at the production plant in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: used, Kniehebelprägepresse - Embossing Stamping Press Krause KHP Prägefläche / Stamping size: 350 x 400 mm Sehr guter Zustand / Beautiful condition Online-Video-Inspection... Pgsdpfx Asvi Hh Ijmyop

Condition: used, Antike Kniehebelprägepresse / Antique Embossing Hot Stamping Press Karl Krause KHP Pgsdpewtw E Dofx Amysp Baujahr / Year ca. 1930 - Serial-No. 48090 Prägefläche / Embossing Size max. 340 x 430mm Beheizung mit Gas / Heating with Gas Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, machine/vehicle number: 24118, Kniehebelprägepresse - Embossing Stamping Press Krause KHP Prägefläche / Stamping size: 350 x 400 mm Sehr guter Zustand / Beautiful condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Pedpfout Tkgox Amysgp On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 21035, Heißpräge - Kniehebelprägepresse - Embossing Hot Stamping Press Krause FNPSerial-No. 4798 Stamping size: 550 x 400 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Pjdpjh Ayg Uefx Amyogp On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Continuous pasta press for short and long pasta. Bought for a project and never used. Pgedjyh Rdfjpfx Amyop

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Pgedpfx Amov Uraajyop Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Year of construction: 1992, condition: good (used), Control system upgrade in 2022 to CYBELEC VisiTouch Pac Press force: 200 t Bending length: 3050 mm Frame width: 2550 mm Pjdpfx Ajim R N Hjmyjgp Control system: CYBELEC VisiTouch Pac Ram stroke: 524 mm Machine weight approx.: 17,000 kg Equipment: - Control system upgrade in 2023 to CYBELEC VisiTouch Pac - Controlled axes: Y1, Y2, X, R, crowning - Hydraulic ram clamping - Hydraulic die clamping - 4-stage pneumatic die adjustment

Condition: good (used), Year of construction: 1993, Press force: 150 t Bending length: 3550 mm Distance between uprights: 3050 mm Control system: Cybelec DNC 880S Stroke: 700 mm Overhang: 350 mm Machine weight (approx.): approx. 15,000 kg Machine height: 3900 mm Accessories/Equipment: - Bending aid positioned in front of the machine - Parking space for the bending aid - 3 stop fingers Pjdsgz S S Sepfx Amysgp

Condition: used, Single-column hydraulic press, DUNKES Type HZT 2.5 Machine No. H94-2558, Year of manufacture 1994 Clamping force 2.5 tons Overhang 180 mm Table surface 420 x 300 mm Through-hole in the table 60 x 185 mm Ram surface Ø 40 mm Dowel hole for clamping Ø 20 mm Ram stroke 160 mm Maximum installation height 250 mm Rapid traverse downward 65 mm/sec Rapid traverse upward 160 mm/sec Working speed 8.3 mm/sec Table height above floor 950 mm Hydraulic operating pressure 135 bar Hydraulic tank capacity approx. 100 liters Drive power 1.5 kW Power connection 400 volts, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and stroke limitation - 2-hand operation on the machine - Stroke counter - Safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion operations) - 32047 operating hours recorded - Electrical wiring diagram and hydraulic diagram available Pgjdpfsh Uhqyox Amysp Space requirement L x W x H 1100 x 980 x 1950 mm Weight 700 kg Very good condition

Condition: used, Meyer Embossing Press, Type AHV-CPL 8050 Pgodebq A A Nspfx Amyjp Machine number: 697102

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio Pjdpetrpiijfx Amysgp - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Pgodpezil S Iofx Amyjp Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, pressure: 1 bar, 1 used low-pressure steam boiler ----- Manufacturer: VIESSMANN Model: Vitoplex 100-LS Output: 580 kW Pgjdpfxow I T E Ie Amyop Steam output approx.: 800 kg/h Water content approx.: 1,316 l Permissible operating overpressure: 1 bar Year of manufacture: 2001 CE marking: 0035 Equipped with Weishaupt gas burner, separate control cabinet, feed water pump, and the existing coarse and fine fittings.

Condition: excellent (used), Year of construction: 2014, operating hours: 52 h, functionality: fully functional, power: 85 kW (115.57 HP), fuel type: electric, operating pressure: 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, type plate available, 5 × RENNER screw compressors – 2 × RSF 85 + 3 × RSF 45 – Frequency-controlled – Water cooling – Heat recovery – Modbus A total of 5 compressors: - RENNER RSF 85 (85 kW) – 52 operating hours - RENNER RSF 85 (85 kW) – 123 operating hours - RENNER RSF 45 (45 kW) – 22 operating hours - RENNER RSF 45 (45 kW) – 138 operating hours - RENNER RSF 45 (45 kW) – 53 operating hours For sale is a package of RENNER RSF screw compressors in an industrial design. All machines come from an industrial test bench system in our own facility and were procured for a development project. Due to a project change, the test benches never went into productive operation. The compressors were then dismantled and stored. This is a specially configured industrial design with special features and practically no productive runtime: - Frequency control - RENNERtronic Plus control system - Modbus interface – integration into building automation systems possible - allowing external setpoint input (pressure/speed) - Water cooling - Design for high cooling water temperatures (60/80 °C) – but does not necessarily have to be used - High outlet temperature for efficient heat recovery (ideal for heating support) Technical data RSF 85 85 kW Frequency-controlled Operating pressure 5–10 bar Flow rate up to approx. 14.5 m³/min Water cooling RENNERtronic Plus Modbus RSF 45 45 kW Frequency-controlled Operating pressure 5–10 bar Flow rate up to approx. 7.25 m³/min Water cooling RENNERtronic Plus Modbus The compressors were specifically designed for the utilization of waste heat. The water cooling allows high cooling water temperatures to be achieved, making the systems ideally suited for heat recovery and feeding into heating systems. The operating pressure can be increased to up to 15 bar by a modification of the pulleys and V-belts as provided by RENNER. A corresponding offer from RENNER is available, but the modification was never needed. Inspection: Psdpfxszi Ukmo Amyogp The machines are dismantled and stored. An inspection is possible at any time by appointment. We will gladly send further photos, nameplates and technical documents upon request. Price: Negotiable / Offers welcome.

Condition: excellent (used), For sale: professional EXpressO vacuum lifter, German-made. This device is designed for lifting and transporting flat items using vacuum technology. Model features increased lifting capacity up to 70 kg, equipped with PIAB components and four large suction cups ensuring stable and secure handling. Ideal for working with glass, sheet metal, panels, and other flat elements in industrial settings and warehouses. Technical specifications: Manufacturer: EXpressO Deutschland GmbH Type: Vacuum lifter Maximum lifting capacity: 70 kg Year of manufacture: 2012 Serial number: 2012 003 Model number: 060BLV1502162 Vacuum system: PIAB Number of suction cups: 4 Vacuum gauge Pneumatic connections Condition: Device in very good technical condition Fully operational both visually and mechanically Normal signs of use Complete as shown in the photos Applications: glass and window transportation sheet metal and panel handling production lines warehouses and logistics Included in the set: complete vacuum lifter control handle air installation Shipping: Courier delivery available. Psdpjyvfchofx Amyjgp

Condition: excellent (used), For sale: Professional vacuum lifter EXpressO Balance Greifer, manufactured in Germany. The device is designed for lifting and transporting flat elements using vacuum technology. The unit is equipped with a PIAB system and four suction cups, ensuring stable and secure gripping of materials. Ideal for industrial applications such as handling glass panes, sheet metal, panels, and other flat components. Technical Specifications Manufacturer: EXpressO Deutschland GmbH Model: Balance Greifer Load capacity: 20 kg Year of manufacture: 2012 Article number: 060BLV114110 Vacuum system: PIAB Number of suction cups: 4 Connections: G1 2 Vacuum manometer Condition The device is in very good technical condition Visible normal signs of use Complete as shown in the photos Applications glass and window handling sheet metal and panel transport warehouses and production production lines Included in the set Pedpfx Asyvd Upomysgp complete vacuum lifter control handle pneumatic installation

Condition: excellent (used), Year of construction: 2013, Airpress APK-G 50/500 Compressor Machine mounted on 500L tank, serviced and equipped with air dryer. Technical specifications: Capacity: 1.9 m3/min (1900/min) Motor power: 15 KW Pressure: 10 bar Operating hours: 4427 h Year: 2013 Net price: 13,700 Gross price: 16,851 The compressor is fully functional, Pgedpfey Idlyex Amyep service support provided. Video below

Condition: ready for operation (used), Wingspan: 3950 mm Overall height: 3650 mm Load capacity: 4000 kg without lifting device Pedpfx Amozp Iqgeyegp

Condition: used, functionality: fully functional, With this listing, you are purchasing a used “Hotronix Thermal Transfer Press XRF” Item for Sale: 1x Hotronix Thermal Transfer Press XRF with the following features: Includes compressor Condition: This listing is for a used device that may show signs of wear (minor scratches or discoloration). The device has been tested to ensure it is in working order. Packaging and Shipping: You are welcome to inspect the device during our business hours. Please schedule an appointment to do so! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we will record a video of a functional test for you. For more information, please feel free to contact us directly. Pgsdpfx Aszpwzuomysp

Condition: used, Lubrication pump, oil pump for central lubrication, lubrication unit Pgsdpezpbq Hjfx Amysp Central lubrication pump, oil pump for central lubrication, hydraulic pump, oil central lubrication pump Manufacturer: BEKA Schmiertechnik / Baier & Köppel, Pegnitz Type E-812 / ES0.5 Year of manufacture: approx. 1990 Flow rate: 0.4 l/min Operating pressure: 15 bar Tank capacity: approx. 3 liters Motor power: 0.09 kW Motor speed: 2730 rpm Current consumption: 0.4 A Power supply: 400 Volt, 50 Hz Dimensions L x W x H: 280 x 150 x 380 mm Weight: 8.5 kg Good condition 2 units available Price stated per unit

Year of construction: 2023, condition: used, Mobile sealing machine with vacuum and protective gas function Manufacturer: BS Verpackung GmbH & Co. KG Model: BS25 Basic Year of manufacture according to nameplate: 2023 Maximum sealing area: 365 × 280 mm Maximum tray height: 115 mm Cycles: 1.5 / min. (depending on the set process parameters) External dimensions: 560 × 970 × 1450 mm (W x D x H) Maximum film width: 380 mm Compressed air connection: 6 bar Vacuum pump: 25 m³/h Weight: 180 kg Power connection: 1 phase, 230 / 400 V, 50 Hz Power consumption: 2.1 kW Sealing types: Sealing / Vacuum / Gas Pgsdpfszp Umhex Amyop Features • Service-friendly design • Quick-change system for the sealing unit • Powerful Busch vacuum pump • High-quality sensor control • Precision cutter for clean contour cutting • Very quiet, sound-dampened compressed air compressor Purchase price (net): €10,500 plus legally applicable VAT. Value-added tax will be shown separately on our invoice. Subject to changes, errors and prior sale. Sale is made without warranty and guarantee and only to business customers. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: used, HYDRAULIC PRESS SMG Podpfotndu Ujx Amyogp PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)