Used Frech Z20/120C for sale (112)

Condition: new, Year of construction: 2018, pan capacity 420 kg Single-Chamber Meltec Furnace Typ Z20/120C unused as new for DAW20A or DAW20S with stainless steel crucible. Nedpfx Amstv Rlzjyscw Crucible content 420kg/Zn. Melting capacity 120kg/Zn/h Electrical Connection 21,5kW With control cabinet.

Year of construction: 1988, condition: used, Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers Njdpofk Smuofx Amyjcw -Industrial trailer with: 1-axle turntable steering -4 roller conveyors, rollers: Ø 65 x 365 mm -Load capacity: max. 6800 kg -Tires: solid rubber -Trailer hitch -External dimensions: 4760/2730/H585 mm -Own weight: 1100 kg

Condition: excellent (used), Decoiler FRECH 2 to x 650 mm, coil-inside-diam. 240 - 270 mm, coil-outside-diam. 1500 mm Nedpozd R Ttofx Amyocw

Condition: ready for operation (used), Year of construction: 1996, Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding furnace, ABB IRB 2400 (M96/F10) industrial robot, and documentation. An on-site inspection is possible. Nsdpfx Amjza E Rmeyscw

Condition: used, Year of construction: 1994, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN Nsdetuxmyepfx Amyscw casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 without control and equipment. As a basic machine for general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Year of construction: 1995, closing pressure 2200 kN clamping plate 755x755 mm distance between columns 500x500 mm weight of the machine ca. 8 t lock stroke 430 mm capacity of ejector 110 kN ejector stroke 100 mm height of form 250-600 mm column diameter 85 mm casting capacity 130 kN casting plunger stroke 175 mm injection plunger diameter 70,80,90 mm casting volume (DIN 24480) 450,636,856 cm ³ volume cast pressure 335,260,203 kp/cm² casting area 656,846,1078 cm 2 Traverse Stroke 230 mm Used Die Casting machine DAW 200 S with Datavario control for the use of zinc alloys. Available in accordance Recommendation from the manufacturer is general overhaul in the overhaul plant. It can be carried out in the scope of agreement. Nsdpfx Aevxlufsmyocw

Condition: used, Year of construction: 2007, used electric sprayer Spraymotion 411 E for die casting machines. The device has been tested by the manufacturer for function Ncodpjtwfknofx Amyow Included support unit and spray- and blowrail (system SR) Connection 24 pin plug electric driving unit with 400mm stroke length

Condition: used, Year of construction: 1999, closing pressure 3150 kN clamping plate 900x900 mm distance between columns 550x550 mm weight of the machine ca. 15,5 t lock stroke 500 mm capacity of ejector 159 kN ejector stroke 120 mm Nodevfhrtopfx Amyjcw height of form 300-700 mm column diameter 110 mm casting capacity 158 kN casting plunger stroke 250 mm injection plunger diameter 70,80,90,100 mm casting volume (DIN 24480) 514,791,1105,1455 cm 2 volume cast pressure 410,316,249,201 kp/cm² casting area 768,996,1265,1597 cm 2 Traverse Stroke 300 mm Used Die Casting machine DAM 315 S with Datacontrol for the use of magnesium alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MMO 315E. Without sprayer. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: repair required (used), Year of construction: 2001, functionality: not functional, FRECH DAK 720-71 RC Die-Casting Machine, used Nsdpfxjwc Tdzs Amyecw Machine number 440403, clamping force 8,000 kN, clamping stroke 825 mm, ejection force 364 kN, ejection stroke 180 mm, mould height 350 to 1,000 mm, clamping platens 1,300 x 1,300 mm, tie bar spacing 825 mm, tie bar diameter 180 mm, maximum casting force 713 kN, casting stroke 600 mm, casting piston diameter 70 to 120 mm, casting volume 1,539 to 4,523 cm³, operating pressure 160 bar, drive motor 45 kW, equipped with MELTEC AVDF 1200/5000 dosing furnace, year 2017, serial number System sold as a donor for spare parts Technical details: Dimensions (L x W x H): approx. 8,000 x 7,500 x 3,500 mm Weight: approx. 36,000 kg Year of manufacture: 2001

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm Ncsdpefrvzvsfx Amysw weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Year of construction: 2017, workpiece weight max. 2000 g Ncedpfx Aoy Diausmyow used weightcontrol WC2000 for die casting machines up to a unit weight of 2000 grams. The device has been checked and repaired by the manufacturer

Condition: used, Year of construction: 2000, closing pressure 900 kN clamping plate 540x540 mm distance between columns 350x350 mm weight of the machine ca. 5,5 t lock stroke 280 mm capacity of ejector 60 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 75 kN casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm casting volume (DIN 24480) 119, 163, 214 cm 2 volume cast pressure 380, 315, 265 kp/cm² casting area 236, 285, 340 cm 2 Traverse Stroke 150 m/m General overhauled Die Casting machine DAW 80 GO with DataLogic control for the use of zinc alloys. Excerpt from the overhaul: · Upgrade of the machine with new control cabinet and operator panel including new electric machine installation · Renewal of the hydraulic system (blocks and valves) · locking unit overhaul Details available upon request The machine is equipped with the following options: Front door motorized, rear door manual handling Cover for drop through area at the subframe Hanging operating desk with monitor 1.0.2 Cover for drop through area at the subframe with scale / chute 3.2.4 Multi-chamber furnace with pump TOC 3.2.1 furnace control cabinet 4.0.1 Hydraulic system for water glycol 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.5.2 Equipment package, Remote Service Dialog (RSD) with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.3.1 Lubricant container TD 20 7.4.0.3 Spray rail CR 275 Ncedjyzt D Ejpfx Amyow Other options can be offered upon request

Condition: new, Year of construction: 2020, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Column diameter 56 mm casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1 Cover for drop through area at the subframe 1.0.2 Cover for drop through area at the subframe with scale/chute 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1 Ejector assistance packages 2.4.2 Securing of ejector platen 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.1.1 Nitrogen pressure control for piston accumulator 3.2.4 Multi-Chamber furnace with pump 3.2.5 Isolated Cover for Crucible Multi-chamber-furnace 3.4.4 Prefilling process 3.4.5 Simplified piston removal Nodpsiu Smbjfx Amyocw 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.2 Convenience Package – Casting – 5.2.1 Ejector Pressure graphics in DATADIALOG control 5.4.1 Data logging Scope 5.4.2 Configurable In- and Outputs 5.6.0 Special cable lengths 6.1.3.1 Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.2.2 Spraymotion 611 E with servo drive, 1-circuit 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.2 Spray rail CR 245 7.12.3 Low noise chute

Condition: new, Year of construction: 2025, closing pressure 240 kN clamping plate 380x380 mm distance between columns 250x250 mm weight of the machine ca. 3,0 t lock stroke 180 mm capacity of ejector 28 kN ejector stroke 50 mm height of form 120-300 mm column diameter 45 mm casting capacity 43 kN casting plunger stroke 85 m/m injection plunger diameter 36,40,45 mm casting volume (DIN 24480) 47,63,87 cm ³ volume cast pressure 420,340,270 da/cm² casting area 56,70,88 cm 2 Traverse Stroke 150 m/m Equipment of the machine 1.0.2 Cover for drop through area at the subframe with scale/chute 1.0.3 Cover for small parts in the subframe 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1.2 Ejector function package "Technology" including SensiEject 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.0.1.2 Casting assistance package Technology including SensiInject 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.5 Maintenance plus package 5.6.0 Special cable lengths 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 Nsdox Hp E Ajpfx Amyecw 7.4.0.1 Spray rail CR 155

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Ncsdpfsucfwpjx Amyew

Condition: used, Year of construction: 1994, functionality: limited functionality, Used Oskar Frech DAW 125 with control cabinet and crucible Ncodowywn Espfx Amyjw

Condition: used, Zwick tensile testing machine Model: Z20 Controller: BX1-EZ020.A4K-000 Technical Data: Stroke: 200 mm Piston dimensions (H x W x D): 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: ClipOn extensometer 13.5 mm Extensometer MFA 25 (temperature range up to +200°C) Computer + Software: testXpert II V3.5 Climate chamber: Airtemp LKG-K-TK-50-040/150 Temperature range: -40°C to +150°C Climate temperature range: 20°C to +90°C Humidity range: 10% to 95% Test chamber volume: 50 liters Temperature change rate: 1 K/min Refrigerant: R404, 5 kg Nodpszil Upjfx Amyecw Voltage: 400V 3Ph/N/PE/50 Hz 16 A 9 kW Condition: used Total weight: approx. 1500 kg Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) For further questions, we are happy to assist you by phone. Written orders possible by email or fax.

Condition: like new (used), Oil-less piston compressor Nedpfx Ajy Nd I Domyjcw Max. 8 bar

Year of construction: 2023, condition: as good as new (ex-display), Pneumatically controlled, without electrical components Tool holder for storing impact wrenches and sockets Catch hook to secure the wheels against falling down Lockable castors for locking the wheel holder Load capacity 65 kg Nsdpfxen Atm Is Amyscw Lifting height 1,2 m Min. height of the room 2,8 m

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining unit, corner copying unit, and two trimming blades. A good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed speed: approx. 8 m/min Noise protection hood Extendable workpiece support Nodpfxjzn Afpo Amyecw Dust extraction connection: 1x100 mm, 4x80 mm, including the illustrated ductwork to 200 mm Easy-Touch control with color display for easy machine operation 10 programs can be saved Units: Upper pressure: manual adjustment with crank and SIKO counter Infeed guide: manual adjustment with SIKO counter Joining cutter with diamond cutters, sharpened A total of 2 interchangeable glue tanks for quick color changes from white to transparent Gluing unit with automatic edge infeed for roll material up to 3 mm Pressure zone with 3 rollers Cut-off saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, chamfering, and radius Corner rounding cutter R2 with diamond cutter, 1 motor-driven Radius trimming blade R2, manually adjustable Glue seam trimming blade with large roller, pneumatically controlled Hood locking CE marking Operating manual as a folder All reversible inserts of the milling units and trimming blades have been replaced or re-sharpened, saws have been sharpened, and diamond joining cutters have been sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profiling cutter has not been replaced, but is still sharp. Original paint, only a few spots have been touched up. Dust extraction hoses have been renewed. Approx. 1200 operating hours, which is only 1/2 hour per day. Machine dimensions: approx. 4300 (with table) x 1250 x 1600 mm (LxWxH) Weight: approx. 950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: good (used), Press force: 200 tons Table: 1500x1000 mm Motor: 45 kW Ncedpfegvz Hxox Amyew Weight: 18,000 kg Frame width: 1500 mm Dimensions: Machine: 5500x2610x2150 mm

Condition: excellent (used), Year of construction: 2006, 70 linear meters of SSI Schäfer Palflex pallet racking, including infill grating Used, in good condition, see pictures Year of manufacture: 2006 Height: 4 m Depth: 120 cm Field load: 12000 kg Frame: galvanized Beams: red Infill grating included! 2 pieces of grating per 2.7-meter beam length Nodpokx E I Nsfx Amyjcw Negotiable price: €8,290 net ex works The offer includes: + 26 units of pre-assembled frames, depth 120 cm, height approx. 4 m + 100 units of beams, length 2.7 m, 1500 kg load capacity per bay with evenly distributed load + 200 units of safety locks + 100 units of galvanized infill grating for 50 levels, each 2.7 meters in beam length + 104 units of concrete anchors + Load capacity signs Goods are in stock. Transport and assembly possible upon request. Inspection possible at any time by appointment. Further information available upon request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex works) Lenox Trading – Top warehouse technology & heavy-duty racking used & new Description text: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage mezzanines & steel construction mezzanines immediately available • 30–50 semi-trailer truckloads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a real all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory, including a complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods release, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty racking or are looking for a galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, functionality: fully functional, empty load weight: 128 kg, maximum load weight: 622 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,010 mm, loading space width: 1,067 mm, loading space height: 400 mm, total length: 2,910 mm, total width: 1,500 mm, total height: 900 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Martz HIT 200 Tipping Trailer NEW VEHICLE Internal dimensions: 201cm x 106cm Total weight: 750 kg Payload: 622 kg Side board height: 40cm Internal height: 120cm Njdpfx Ameznv T Teyjcw Unbraked, single-axle, low-loader trailer Removable side boards made of galvanized sheet steel Rear and front walls can be folded down and removed Tarpaulin cover, 120cm high, with steel frame Easily converted into a transport platform Bolted and galvanized steel frame Drawbar can be folded down Screen-printed plywood floor 13-pole electrical system Rear lamps with reversing light and triangular reflectors Plastic mudguards Support wheel 13-inch M+S tires Vehicle can be placed on the rear panel for storage Optional accessories: - 100 km/h upgrade - Rear supports - Mesh superstructure - Extension side boards, 40cm - Aluminum cover with bracket for, e.g., a bicycle carrier - Flat tarpaulin with or without bow - Mesh, coarse or fine - Spare wheel with bracket - Ramps More accessories available upon request! Images are for illustrative purposes only and may show optional accessories that incur an additional charge. Plus vehicle registration document and transport costs to Gera: €100 net. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repairs, including for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or come by directly.

Condition: as good as new (ex-display), functionality: fully functional, This single-sided heavy-duty cantilever rack is ideal for storing heavy long goods such as pipes, profiles, metal bars, steel beams, wooden strips, and sheet material. With a total length of approximately 13.20 meters, a height of approximately 4.00 meters, and cantilever arms of approximately 120 cm, this long goods rack offers a high storage capacity across a total of 4 storage levels (floor level + 3 levels). Each cantilever arm supports up to 500 kg, and the uprights can support up to 2,250 kg. The cantilever arms are bolted on and can be flexibly adjusted in height via a hole grid of 200 mm. The completely hot-dip galvanized material ensures long-lasting protection both indoors and outdoors – new goods available from the Wietmarschen warehouse. PRODUCT DETAILS: - Rack type: single-sided heavy-duty cantilever rack - Total length of the rack row: approx. 13.20 m - Total height: approx. 400 cm - Arm length: approx. 120 cm (made of IPE 80) - Center distance (upright spacing): approx. 131 cm - Levels: floor level + 3 storage levels - Load capacity per arm: max. 500 kg (with uniform distribution) - Load capacity per upright: max. 2,250 kg (with uniform distribution) - Upright profile: IPE 160, approx. 400 cm, including base - Hole grid upright: approx. 20 cm - First hole above base: approx. 107.5 cm (from top of base) - Top hole pair: approx. 50 cm below the upright head (from top of head) - Design: single-sided, cantilever arms bolted on - Surface: completely hot-dip galvanized - Availability: new goods SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm made of IPE 160, including base, hole grid 20 cm - 33 x cantilever arms, approx. 120 cm made of IPE 80 (without end stops) - Including all connecting elements - Including all necessary screws - 1 x load sign Price: €5,750.00 net €6,842.50 gross You will receive an invoice with VAT shown. Nsdpeznuv Hofx Amyscw DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams is optionally available - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding offer for you – tailored to your individual requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice on your rack configuration. Haven't found the right one yet? Visit our website – here you will find a quick overview of many offers and variations of the products! ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You will find our telephone number on our company website. You can reach us by telephone from Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Year of construction: 2020, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 4760025, MACHINE DESCRIPTION Special drive concept Multi-axis Profiroll CNC/AC control Two-slide design Graphical user interface Process visualization Data management Operator guidance Integrated workpiece handling The PRI 120 CNC/AC is a newly developed internal gear back-rolling machine for rolling back angles onto the tooth flanks of existing internal gears. The innovative machine concept is based on over 60 years of experience in the development and manufacture of thread, profile, and gear rolling machines in Bad Düben. The machine’s base frame is a ribbed, torsionally rigid machine bed made of cast iron, which minimizes vibrations. In particular, the use of state-of-the-art proportional valve technology in conjunction with the PROFIROLL CNC control enables optimal process control of the rolling process. The control system, in combination with the backlash-free roller guide system, guarantees the highest precision and repeatability in the positioning Ncsdpfxjznkz Sj Amyow of the rolling slide and, thus, of the tool. The innovative handling system, in conjunction with the rolling process, allows for the shortest cycle times. TECHNICAL DATA / PARAMETERS Workpiece diameter min./max. (mm) = 60/120 Workpiece width, min./max. = 10/40 Tool mounting length (mm) = 50 Connection value (kW/A) = 16/63 Width (mm) = 3600 Depth (mm) = 3600 Height (mm) = 2680 Weight (kg) = 5700