Used Franke Ta-Mc for sale (12,602)

Year of construction: 2006, condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, transport trailer, refuse transport trailer Nlsdpfx Ajl Dvtksbwsd -Manufacturer: Franke, transport trailer low loader, refuse transport trailer type TA-MC -Platform: Length 2750 mm, dimensions see photos / technical drawing -Load capacity: 1200 kg -Maximum speed: 25 km/h -Number: 2 trailers available -Price: per piece -Transport dimensions: 5100/1735/H1740 mm -Empty weight: 840 kg/unit

Condition: ready for operation (used), Fagor MOCA-725 Vers. 09A Length scale with MC-A reading head Vers. 30A SN: 118001318050738 - total length: 82,5cm,used, good condition, 100% working, scope of delivery according to photos Njdpfxjt Nbzfe Abwold

Condition: ready for operation (used), Fagor MOCA-1145 length scale with MC-A reading head SN: 118001319060894 - total length: 125cm, used, minor signs of wear, 100% functional, scope of delivery as per photos Nlsdjt Iy Uzopfx Abwod

Condition: new, functionality: fully functional, empty load weight: 6,495 kg, overall weight: 39,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, loading space volume: 60 m³, total length: 13,060 mm, total width: 2,530 mm, suspension: air, tire size: 385/65, tire condition: 100 %, ground clearance: 4,000 mm, Year of construction: 2026, NEW – AVAILABLE FOR IMMEDIATE DELIVERY Kassbohrer Silo 60 m³ – SSK 60 Silo for the transport of FLOUR, GRAINS, SUGAR, RICE, CEREALS, and PLASTICS Volume: 60 m³ Nlsdpjzcaaujfx Abwed Length: 13,060 mm Unladen weight: 6,495 kg BPW axles, 1st axle liftable 5 manway access points Storz end coupling Aluminum rims Pneumatic railing lifting system Electropolished discharge cone

Condition: new, functionality: fully functional, empty load weight: 5,980 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, loading space length: 10,200 mm, loading space width: 2,480 mm, loading space height: 2,000 mm, loading space volume: 52 m³, total length: 11,350 mm, total width: 2,550 mm, total height: 3,536 mm, suspension: air, tire size: 385/65, tire condition: 100 %, Year of construction: 2026, NEW – AVAILABLE FOR IMMEDIATE DELIVERY Aluminum Chassis 52 m³ Aluminum Tank Unladen Weight: 5,980 kg SAF Axles: 1st liftable, 3rd steering ALCOA Aluminum Rims Side walls: 2.00 m high Floor thickness: 8 mm Rear door with double opening BRAND NEW VEHICLE OF HIGH CONSTRUCTION QUALITY PRICE AVAILABLE AT OUR PREMISES ONLY. Njdpozbxuzjfx Abwold

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, For industrial sale, a fully automated saw for cutting lumber packages and structural elements – a complete technological line for formatting packages to a specified length. The device is designed for use in sawmills and wooden structure manufacturing plants, where process efficiency, consistent cutting length, and package stabilization during cutting are crucial. Inspection and testing are possible at Delfina 20, 98-354 Siemkowice, POLAND. Operating parameters: • Max. package: 1300 × 1300 mm (width / height) • Max. input package length: 6000 mm • Max. cutting length: 3000 mm • Min. cutting length: 600 mm • Max. package weight: 8000 kg • Cutting accuracy: ±2 mm The minimum package cross-section is determined by the extreme position of the hydraulic clamps – cutting packages with smaller dimensions is permissible. Cutting module: • Main motor 11 kW • HIWIN linear guides with increased load capacity Njdexn Rt Uepfx Abwold • GB TITANIUM guide + STIHL chain • Automatic guide lubrication system The rigid construction of the unit ensures stable operation and consistent cutting length. Package stabilization: • System of 6 hydraulic clamps (top + side + front and behind the cutting line) • Package support on vertical rollers • Elimination of package movement during saw entry Process automation: • Intelligent package strapping system • Automatic determination of strapping locations • Option for automatic initial cutting • Buffer for cut packages Transport and handling: • Transverse loading conveyor • Transverse unloading conveyor • Automatic package pickup after cutting Waste removal: • Belt conveyor for waste (~10 m) • Hydraulic tilting rollers of the cutting module (protection against large waste jamming) Automation: • Siemens PLC controller • Yaskawa servo drive and inverters • 21–22” operator panel • Remote service and diagnostics Additionally: • Winter package – heating of the control system • Transport to the customer – included in the price • Installation – included in the price • Commissioning – included in the price • Operator training – included in the price

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Nsdpeycg Ryjfx Abwsld Horizontal compressed air tank – 500 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1840 × 640 × 1470 mm Weight: 320 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER SET INCLUDES: LUFT 1500 VSD+PM COMPACT screw compressor with dryer. Horizontal compressed air receiver 500 L. Key features that distinguish these models: 1. Permanent Magnet (PM) Motor Technology Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency levels compliant with IE4 or even IE5 standards. They maintain high efficiency even at very low speeds, where standard motors lose performance. They are smaller, lighter and generate less heat. 2. Advanced Inverter Control (VSD) The core of the Energy Saver line is a frequency converter (inverter). Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy. Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which: Protects the plant’s electrical installation. Allows frequent start-stops without overheating the windings. 4. Real Savings In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life. Technical Parameters Nledpfsychbaox Abwjd Motor power 11 kW / 15 HP Voltage 400V / 50Hz Output 0–6 bar 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet connection (G) 1" Dimensions 1600 × 740 × 1750 mm Weight 500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK LUFT 1000 VSD+PM Compact Screw Compressor with Dryer – Compact Set for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 1000 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 500 L Key Features That Distinguish These Models 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels compliant with IE4 or even IE5 standards Maintain high efficiency even at very low rotational speeds (standard motors lose efficiency outside their nominal range) Nlodpsycg Ufjfx Abwod Are smaller, lighter, and generate less heat 2. Advanced Variable Speed Drive (VSD) Control The core of the Energy Saver line is the frequency inverter (VSD). Demand-based operation: The compressor does not operate in an “all-or-nothing” (load/unload) mode. If your system requires only 30% capacity, the compressor reduces its speed and consumes proportionally less energy. Elimination of idle running: Traditional compressors often continue running for several minutes after the tank is filled, consuming approx. 25–30% of nominal power without producing air. Energy Saver models almost completely eliminate this energy loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Protects the electrical installation in the facility Allows frequent start/stop cycles without the risk of winding overheating 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the air network (with accuracy up to 0.1 bar), which is crucial for precision equipment such as laser cutting machines. Extended service life: The absence of sudden pressure and temperature spikes significantly extends the lifespan of the screw element. Technical Specifications Motor power: 7.5 kW / 11 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 990 L/min Air delivery at 6 bar: 990 L/min Air delivery at 8 bar: 950 L/min Air delivery at 10 bar: 950 L/min Outlet connection (G): 3/4" Dimensions: 1495 × 600 × 1600 mm Weight: 350 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 270 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Nledpfeycg I Ssx Abwsd Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1495 × 520 × 1340 mm Weight: 250 kg

Condition: used, maximum load weight: 18,030 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 08/2022, loading space length: 9,410 mm, loading space width: 2,470 mm, loading space height: 3,050 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, H&W HWZPS24 Tridem Curtainsider (Jumbo) ----* CODEXL Certified (EN12642-XL) * Fixed front wall * Sliding tarpaulins on both sides * 2 storage boxes * Chocks * Spare wheel * Fire extinguisher * Additional rear support ----* BPW axles with drum brakes * Wabco air system * Knorr TEBS braking system Nlsdsy Dzgyspfx Abwed ----* Tire size: 435/50R19.5 * Technically permissible total weight: 24000 kg * Tare weight: 5970 kg * Overall length: 11650 mm ----?Vehicle number: 12002/12001/12000----Errors and prior sale excepted----Advertisements and various inscriptions have been digitally removed. -----We will be happy to assist you with all the formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arranging financing, applying for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport.----?YOUR VTS TEAM

Year of construction: 2001, condition: used, Gantry Crane MC LEVAGE Capacity: 1 T Year of construction: 2001 Height under hook: 3500 mm Nlodpfx Abjzmwm Eswod Distance between uprights: 4400 mm Height under beam: 4000 mm Base width: 2300 mm Voltage: 380 V

Condition: excellent (used), CATALOGUE NUMBER 7967 TECHNICAL DATA - max. width of workpiece: 1100 mm - max. height of workpiece: 170 mm 2 units: 1) metal grooved roller for calibration 2) grooved rubber roller + shoe + metal roller – from above: - slip rubber roller - unit (two units on one motor) 15 kW Nlsdpfx Aeza Elwobwjd - slip rubber roller - take-off rubber roller - tape blowing – from below: - 2 slip metal rollers - conveyor belt - 2 slip rubber rollers - pneumatic tape oscillation - grinding thickness potentiometer - electric table lifting + manual (for precise adjustment) - pneumatic brake - 2 feed speed types - working pressure 6-8 bar - dust extraction nozzle diameter 2x140 mm - overall dimensions L/W/H 1830x1670x1950 mm - weight 1160 kg ADVANTAGES - Made in Italy - 2 grinding units - Unpainted - Used sander, in perfect condition Net price: 72900 PLN Net price: 17357 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: good (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 7,000 mm, rotational speed (max.): 12,000 rpm, overall weight: 12,000 kg, For sale is a machining center by Deckel Maho, model DMC 60 T. The machine is in good condition and ready for immediate use. Technical data: Year of manufacture: 2005 Operating hours: 39,256 Power-on hours: 72,107 X-axis travel: 780 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control: iTNC 530 Heidenhain Spindle speed range: 20 - 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool holder: SK 40 B-axis infinitely adjustable: 150° (-120/+30)° Number of pallets: 2 Pallet size: 630 x 500 mm Nljdpjwtft Nsfx Abwed Max. load: 400 kg Table speed range: max. 30 rpm Number of tool stations: 120 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent pocket empty: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Rapid traverse ( X / Y / Z ): 50 m/min Feed rate: 20 - 15,000 mm/min Total power requirement: 64.2 kVA Machine weight: approx. 12.0 t Floor space required: approx. 7.0 x 7.0 x 2.8 m Included in the offer: Documentation, chip conveyor, coolant system, high-pressure coolant 40 bar through spindle, paper band filter, 2-position pallet changer, tool breakage monitoring Accessories such as clamping devices or tool holders are NOT included in the offer. Transport and loading can be organised throughout Europe at additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, spindle bore: 50 mm, turning diameter: 400 mm, turning diameter over bed slide: 400 mm, turning diameter over top slide: 250 mm, center height: 200 mm, center width: 1,000 mm, turning length: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, total length: 1,950 mm, total width: 1,060 mm, total height: 1,635 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, center height over cross slide: 200 mm, overall weight: 865 kg, spindle motor power: 5,300 W, Equipment: documentation/manual, rotational speed infinitely variable, type plate available, EMCO EMCOMAT-20 D universal lathe in very good condition, complete with tool cabinet and various tool cassettes, collets, and 4 RÖHM chucks. Manufacturer: EMCO Model: EMCOMAT-20 D Year of manufacture: 2010 Condition: very good, fully functional Location: Graz (Austria) Highlights at a glance: - Center distance 1000 mm – ideal for longer workpieces - Stepless speed control up to 3000 rpm - Robust, induction-hardened machine bed - Hardened and ground guides & gears - Electromechanical spindle brake - Very stable construction – 865 kg machine weight - Safety monitoring via electrical limit switches - Equipped with a modern 3-axis digital display Technical data: - Center distance: 1000 mm - Center height: 200 mm - Swing over bed: 400 mm - Spindle bore: 50 mm - Speed: 40 to 3000 rpm - Spindle connection: DIN 55029 size 5 - Drive power: 5.3 kW Nedpjyxvqvjfx Abwjld - Tailstock diameter: 50 mm - Taper: MK3 - Travel: 120 mm - Dimensions (L x W x H): 1950 x 1060 x 1635 mm - Weight: approx. 865 kg Optional equipment: - Coolant system - 3-axis positioning display with 0.001 mm accuracy Scope of delivery: - Machine including drawer cabinet and various tools, tool cassettes, etc. (see pictures) - 4 RÖHM chucks (3 and 4-jaw chucks) - Complete documentation (operating manual, wiring diagram, etc.) Quality & Safety: The machine impresses with the typical EMCO quality "Made in Austria": Interested? Please contact us to arrange a viewing appointment or to receive a quote.

Year of construction: 2016, condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 30 mm -Load capacity: 3000 kg -Number: 2x terminals available -Price: per piece -Weight: 15.4 kg/piece Nlsdpfxed Aqtro Abwjd

Condition: used, Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve, balancing valve -Manufacturer: TA Hydronics, line regulation valve regulation valve, unused original packaging -Type: STAF-SG DN50 PN25 Nlsdpfx Abjiqy Tpjwjd -Number: 3x valve available -Price per piece -Dimensions cardboard: 220/170/H270 mm -Weight: 6.8 kg/pcs

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 196-477 NL, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 400 mm, Machine in excellent condition from a measuring room Njdpfx Ajyxxphobweld

Condition: excellent (used), TA-Instruments Type: TMA Q400 TMA Thermomechanical Analyzer Performance: Njdpfjzdyz Tox Abweld Temperature range (max.) -150 to 1,000 °C Temperature accuracy ± 1 °C Oven cooling time (air cooling)

Condition: new, driver cabin: other, gearing type: other, Year of construction: 2026, Equipment: crane, Vehicle location: Bovenden Type: ICM CLA-L 125 two-shell grapple with hydraulic rotator, available 18 times Capacity: 125 liters Nedpfjzgxndsx Abwjld Width: 450 mm Opening width: 1200 mm Filling capacity: 250 kg Available 18 times – NEW from stock! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: ready for operation (used), Agie DMC-01B digital motor control, serial number 626074.9, used, minimal signs of wear, 100% functional, scope of delivery as shown in the photos. Nlsdji D Tv Dopfx Abwjd

Condition: ready for operation (used), Siemens 6FX1147-4BB00 NC-/COM-CPU E Stand E, used, normal signs of use, 100% functional, scope of delivery as per photos Nljdpfx Asxagq Tobwsd

Condition: new, Siemens Sinumerik 6FC5303-0AF50-3BB0 machine control panel MCP 466C-M IE FS: A, SN: T-ED6102065, unused, 100% functional, scope of delivery as per photos. Nlodox Eutijpfx Abwod

Condition: ready for operation (used), Agie Digital motor control unit DMC-01 B 626074.9, used, minor signs of wear, 100% functional. Nedji D Tvyspfx Abwsld

Condition: ready for operation (used), Control panel for OKK MCV-500 machine with Fanuc A860-0200-T021 pulse generator, used, good condition, fully functional, scope of delivery as shown in the photos. Njdpfey Rci Nsx Abwjld