Used Frame Saw With Oscillating Frame for sale (15,081)

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. Lhsdpfxezgr Iqo Abzsl HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm with swing frame with water-cooled guides with hydraulic saw clamp Jansen with riving knife Lhsdpoqpdi Uefx Abzjl with saw blades with templates with fence immediately available Location: Austria, near Klagenfurt

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder Lhedpfxsyhduye Abzsl - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Location: Austria, near Graz

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor With gear transmission With saw blades With hydraulic saw tensioner With suspension system With templates With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Lhsdjw Dn S Ajpfx Abzsl Location: Austria, near 8700 Leoben

Condition: new, 1 brand new horizontal bandsaw machine with a swiveling frame and double miter capability (R/L) Manufacturer: HUVEMA / BEKA-MAK, Origin Turkey Model: HU 230 DG-4 Cutting range: Round 230 mm Rectangular 320 x 130 mm Square 230 mm -45° Round 180 mm -45° Flat 230 x 100 mm -45° Square 150 mm +45° Round 210 mm +45° Flat 230 x 160 mm +45° Square 180 mm +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 760 mm Motor power, main drive 1.0 - 1.3 kW, 400 V, 50 Hz Motor power, coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Double miter capability through a swiveling frame o The material to be cut remains straight in space! o No need to turn the material for miter cuts! o High efficiency with enormous time savings! • Adjustable precision stops 0°, 45° and 60° on the left and 45° on the right • Interchangeable work table • Quick-release vise, can be shifted to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is regulated steplessly by a hydraulic cycle • Coolant system • Chip brush • Swiveling control panel • Electric safety switch for blade tension and saw blade guard • Automatic shutdown at the end of the cut • Emergency stop switch • CE compliant Ledpfsfk Ew Ejx Abzshl Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: good (used), functionality: fully functional, Esterer spreading jaw AVER. Equipped with electrically driven spreading rollers. Also adjustable manually. Electrical adjustment of the spreading jaws, also asymmetrical. Pressure rollers can be hydraulically extended and retracted. Heavy-duty spreading jaw blades and spring flaps. Lhjdpfx Ajz D Exusbzsl

Year of construction: 1974, condition: used, functionality: unexamined, For sale: - Circular saw mill, type OS65, from a carpentry/lumber mill in very good condition. - Low operating hours, only approx. 800-1000 m³/year. - Clamping carriage, self-propelled. - Auxiliary carriage. - Approx. 15m of guide rails for the clamping carriage/auxiliary carriage. - Splitting wedge/outfeed rollers, not driven. Lhodpfez Dn Ulsx Abzel - €20,000 net / plus VAT. The following are also available separately: - Log infeed system - Chain hoist with transverse conveyor Prior inspection is required.

Condition: good (used), functionality: fully functional, High-performance band saw / HIGH SPEED FRAME SAW EWD HDN 600 TECHNICAL DATA: Well-maintained, high-performance band saw Frame width: 710 x 735 mm Stroke: 600 mm Speed: 310 rpm Fully hydraulic with automatic overhang adjustment Hydraulic saw tensioner and saw chuck Drive motor and gearbox Electrical control cabinet with control system Splitting wedge, type AVER, with hydraulic drive In very good condition, (complete overhaul available upon request!) Lhjdpfx Abjz Aqlmezol Excellent condition with remotely controlled clamping carriage and 1 band saw EWD LSH as well as one band saw EWD GDZGE 600 in stock!

Condition: excellent (used), 1 saw frame in very good condition 710 mm frame width with 8 guide shoes in good condition Lsdpolni Uqefx Abzehl

Year of construction: 1982, condition: ready for operation (used), We offer you frame saws: Ledon I Udxopfx Abzshl 1. Frame saw Bogli 71 with infeed and auxiliary car, and distribution device behind the sawmill. Sawmill type: Bogli Marathon 71 Frame: 710 mm, hydraulic sawmill Hydraulic lifting and lowering of the saw blade 55 kW motor Car with auxiliary car, track gauge 90 cm Distribution device behind the sawmill All as shown in pictures no. 1, 2, 3, 4 Price is negotiable. 2. Saw gate Linck E 28-28 Frame stroke 600 mm All as shown in pictures no. 5, 6, 7, 8 Price is negotiable. 3. Saw gate Linck with a loading car and a distribution device behind the sawmill. Saw frame Linck 71 – Frame width 710 mm – Feed rate 12 m/min – Fully hydraulic: hydraulic shifting of the saws, lowering and lifting of the saw blade Linck hydraulic loading car with additional equipment. Distribution device behind the sawmill (sack, wedge) All as shown in pictures no. 9, 10, 11, 12, 13 Price is negotiable.

Condition: excellent (used), functionality: fully functional, Well-maintained W&D gate-type press, model GXW 71 VH. Lodpfxszz Iu As Abzohl Frame width 710 x 710 mm. Stroke 500 mm. Infinitely variable hydraulic feed. Hydraulic cylinder lift with adjustable cylinder pressure. Drive. Saw attachment. Electric remote control. Clamping carriage and wedge with electric adjustment. From a small operation. Also interesting as a source of spare parts.

Condition: new, Year of construction: 2026, For sawing, e.g., stainless steel, tool steel, hollow profiles, and solid materials. Two-pole drive motor enables saw blade speeds of 30 and 65 m/min. Monitoring of the saw blade tension electromechanically via microswitches. When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve – additional locking on the cylinder is therefore not required. Saw arm inclined by 25°, resulting in a longer service life of the saw blade. Precise and robust blade guides with adjustable carbide plates. After the cutting process is completed, the saw blade stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With continuously adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/Depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Machine data Saw blade speed(s) 30 / 65 m/min Speed stages 2 Saw blade length 2450 mm Saw blade width 27 mm Saw blade thickness 0.9 mm Material feed Table height, material feed 925 mm Cutting ranges 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular (lying, hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm Lhjdpfx Abog U Uv Rjzol -45° rectangular (lying, hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular (lying, hollow profile) 90 x 90 mm Art. No.: 3680001 Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, For sawing pipes and solid materials made of high-grade and tool steel. Two band speeds via a pole-changeable motor. Robust gearbox with hardened and ground shaft. Precise and robust band guides with adjustable carbide plates. Longer service life of the saw band due to a 25° saw arm inclination. Efficient coolant application to the saw band guides. Electromechanical monitoring of the saw band tension; if deviations occur, a microswitch switches off the machine. Chip removal brush for optimal cleaning and maintenance of the saw band. Operation of the semi-automatic machine: Automatic workpiece clamping after the start of the cutting cycle. Execution of the sawing cut with the selected band speed. Automatic stop of the lowering movement and the saw band in the lower end position. Automatic retraction of the saw arm to its upper end position. Ledpfx Aed Hx Uqobzshl Vise opens automatically. The operator only needs to move the material. Equipment: Two band speeds Cutting feeler Coolant system Chip removal brush Saw band tension monitoring Swiveling control panel Length approx. 1860 mm Width/Depth approx. 1045 mm Height approx. 1750 mm Weight approx. 405 kg Drive power Power consumption 1.5 kW Electrical data Connection voltage 400 V Machine data Saw band speed(s) 20 - 100 m/min Speed stages continuously variable Saw band length 2720 mm Saw band width 27 mm Saw band thickness 0.9 mm Cutting angle +60 – -45 ° Cutting ranges 0° round (pipe) 230 mm 0° round (solid material) 150 mm 0° rectangular lying (hollow profile) 280 x 180 mm 0° bundle (pipe) 180 x 120 mm -45° round (pipe) 195 mm -45° round (solid material) 110 mm -45° rectangular lying (hollow profile) 180 x 170 mm -60° round (pipe) 125 mm -60° round (solid material) 80 mm -60° rectangular lying (hollow profile) 120 x 100 mm +45° round (pipe) 185 mm +45° round (solid material) 110 mm +45° rectangular lying (hollow profile) 180 x 120 mm Feed Table height material feed 785 mm Min. remaining workpiece length 22 mm

Year of construction: 1999, condition: excellent (used), functionality: fully functional, EWD gang saw line with edger and stacking system Lodpezvyn Dsfx Abzehl Complete cutting line from gang saw infeed to finished stacked lumber. The system includes automatic gang saw infeed, cutting with a high-performance EWD gang saw, material transfer, automatic edger, and a fully automatic stacking and packaging system. Technical specifications Cutting lengths: 2,500–6,000 mm Frame width: 710 mm Clearance height: 700 mm Saw stroke: 600 mm Gang saw speed: up to 320 rpm EWD H38 gang saw infeed EWD high-performance gang saw, type GDZ/GE 600 Main drive: 160 kW Hydraulic blade tensioning for up to 25 saw blades Heckel extraction and conveying technology Automatic edger, type FR 9 WD, with two movable sawing units Cross-cutting system as well as centering and feed system with pre-measuring Two fully automatic stacking and packaging systems Output up to 24 boards per minute per stacking system Automatic layer formation, spacer insertion, and package transfer

Condition: excellent (used), functionality: fully functional, Complete sawing frame for EWD Esterer gate, type HDN 600 or HDS 600 with width adjustment. Includes Jansen double-yoke tensioner. Lhjdpozn Uv Hsfx Abzjl Lightly used. Ideal for keeping spare parts in stock.

Year of construction: 2004, condition: ready for operation (used), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800rpm. On-site inspection is possible. Ljdpswu Ez Njfx Abzjhl

Condition: excellent (used), Year of construction: 2000, Vollmer gang saw squaring machine Ljdpezl Nwtefx Abzjhl

Condition: used, Year of construction: 1987, No. 3186 Frame saw / gang saw MÜLLER VGU / 4/71 Used, year of construction 1987 Passage 710 mm Drive motor 75 kW Hydraulic belt tensioning Manual width adjustment Including hydraulic clamping carriage, riving knife, gauges for width adjustment, electrical control cabinet, various saw blades Sale on behalf of customer, ex location near 47051 Duisburg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Lhodpfxsvcqane Abzol For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), functionality: fully functional, Hydraulic sharpening machine for band saws. Type Hydromat. Also ideal as a spare parts machine. Lodozdkbkopfx Abzshl

Year of construction: 1985, condition: used, Mayrhofer tension trailer Year of manufacture: 1985 Track width: 90 cm with auxiliary trailer Lhsdszl N Ekopfx Abzsl immediately available – fully functional, but should be inspected/overhauled Location: Austria, near St. Pölten

Condition: used, Technical specifications: Max. blade diameter: 300 mm Cutting range: 45° Pneumatic clamping Blade guard Pneumatic blade lifting Operating pressure: 6 bar Lhjdjzht Saopfx Abzel Safety switch Power supply: 400 V Motor power: 2 x 1.5 kW

Condition: used, Wide selection of used spare parts in good to very good condition for EWD Esterer HDE 71. Overhang plates, adjustment gearboxes for overhang adjustment, complete feed unit, saw frame, roller shafts with sprockets, hydraulic cylinders for roller lifting, chain housing, etc. Lhjdpfx Aozht Hwebzsl

Condition: used, Year of construction: 2000, Used, good condition Make: Schneider Type 2406 Year of manufacture: 2000 Machine no. 910 CE-certified Cutting height 250 mm Saw blade tiltable between 90° and 30° (60°) Turntable rotatable 180° Motor power 7500 W, 400 V Saw blade diameter 650 mm Cutting height for rip cuts Continuously adjustable from 0 to 250 mm Cutting width adjustment for rip cuts 650 mm by transverse saw movement Motorized tilting with digital display Movable machine stand Automatic saw feed with two-hand control Laser kerf indicator, cross cut Pneumatic workpiece clamping on the right and left New price approx. €25,000.00 Extraction connection 100 mm Space required approx. 2800 mm x 2800 mm x 2000 mm Weight approx. 900 kg Lhodpfx Abjwkvw Hozjl Storage location 97447 Gerolzhofen, free on freight, unpacked Handed over in as-is condition, as seen, without warranty or guarantee

Condition: good (used), For sale: Wood processing line: - FOD DTRA 63 bottom-driven frame saw - 2 units - Log infeed conveyors - cross and longitudinal - Conveyors - Trolleys - Rails Machines are operational and in working condition Basic technical data for the FOD sawmill: Horizontal clearance mm 650 Saw frame stroke mm 520 Clearance between rollers mm 80-570 Lhedpfx Ajyhzhhebzsl Minimum log diameter mm 100 Maximum log diameter mm 550 Minimum log length mm 2200 Main shaft rotation speed rpm 300 Feed per main shaft revolution mm/1 rev. 4 - 30 Maximum number of saw blades pcs. 12 Main motor power kW 45 Feed motor power kW 4 Hydraulic unit motor power kW 2.2

Year of construction: 1980, condition: used, Passage width: 560 mm Passage height: 560 mm Stroke: 600 mm Maximum speed: 320 1/min The gantry system is fully mechanized and equipped with a new Moehringer quick-feed system. Lodpfecvhndex Abzjhl