Used Formit Limited Profiling Machine for sale (70,666)

Condition: excellent (used), The Formid Limited is a roll forming line with an electrically extendable support system for forming sets up to 800 mm. The drive is manual via a bevel gearbox. It can be combined into a single electric system and measures the width of the spacing. Mounted on 45 mm shafts, 12 keyways, shaft distance 145 mm. Axle spacing 250 mm. Shaft spacing minimum 200 mm from each other and 800 mm apart. Powered by a 380-volt electric motor with 15 kW. The system is suitable for profiles with frequently varying center widths. It features center roller supports to maintain the lower layer of the steel strip, which in turn supports the base strip substrate in a defined profile. The system also includes 16 stations. Lasdpfx Ajwxv Izenujc

Condition: good (used), Year of construction: 2020, functionality: unexamined, type of input current: three-phase, total width: 970 mm, total length: 2,530 mm, total height: 2,190 mm, overall weight: 850 kg, compressed air connection: 12 bar, Designed for bulk products and powders, it features a dosing head for bulk materials. It has a screw-type filling conveyor. It doses into doypack packaging with dimensions of 190 mm x 230 mm. The equipment was purchased but never put into operation; the project was discontinued. Ledpey U Twrjfx Anueac

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, rotational speed (max.): 2,500 rpm, swing diameter over bed slide: 470 mm, center width: 1,000 mm, TECHNICAL DETAILS Lsdpfxjywg Rdo Anujac Distance between centres: 1,000 mm Swing diameter over bed: 470 mm Spindle speed ranges 1: 50–270 rpm 2: 150–850 rpm 3: 450–2,500 rpm MACHINE DETAILS Electrical supply Mains voltage: 415 V Phases: 3 Frequency: 50 Hz Control voltage: 24 V Main motor power: 7.5 kW Main motor current draw: 13 A Auxiliary motor power: 0.173 kW Auxiliary motor current draw: 1.55 A Total motor power: 7.673 kW Total current draw: 14.55 A

Condition: excellent (used), Catalogue number 7248 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - worktable (length/width): 420x1010 mm - motor: 11 kW - 2 pneumatic workpiece clamps - extraction port diameter: 180 mm - dimensions (L/W/H): 1500x1010x1560 mm - weight: 689 kg ADVANTAGES – German manufacture Lsdpfxsy Sn N Do Anueac – Used milling machine, in very good condition Net price: 31,900 PLN Net price: 7,590 EUR depending on exchange rate of 4.2 EUR (Prices may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. Lodpfsyga T Nox Anueac The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Specification from the nameplate: • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Used condition, complete, visible signs of use consistent with age. Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production.

Condition: used, Hydraulic CNC profiling and grooving machine LEISTRITZ, Type Polymat 50 / 400 CNC Machine No. 90, Year of manufacture 1990 Groove width max. 50 mm Working stroke max. 400 mm Maximum drawing force approx. 15.9 kN Groove depth feed rate 0 to 0.5 mm/stroke Cutting speed max. 20 m/min Return stroke speed max. 40 m/min Table size 440 x 595 mm Number of T-slots 3 T-slot width 14 mm Working height - table height 1405 mm Hydraulic oil tank capacity approx. 150 liters Cutting oil tank capacity approx. 35 liters Motor power (hydraulics) 5.5 kW Mains connection 380 volts, 50 Hz - CNC control POLYMAT - Machining functions: Drawing Lodpozd Hiqsfx Anujac - Automatic feed with shut-off - Hydraulic working stroke - Infinitely adjustable cutting speed - Oil lubrication - Hydraulic cylinder fitted with new sealing elements (2/2025) - Various accessories as shown Weight 1700 kg Space requirement L x W x H 1080 x 1400 x 1405 mm Good condition

Condition: like new (used), Year of construction: 2025, Schlebach EPM 25 ☑️Only 1 year old and in like-new condition☑️ ☑️Immediately available, no delivery time☑️ Universal machine for the production of 25 mm double standing seam profiles from short, tapered, or pointed cut pieces or from sheet material in two passes. The machine is equipped with: ✅ Profiling rollers for 25 mm seam height ✅ Rollers including transport handles for easy transport ✅ Support rail on the upper and lower deck ✅ Bending capacity: 0.8 mm (zinc, aluminum, and copper), 0.7 mm steel sheet Condition: • Very good technical condition • Very good visual condition • Weight: approx. 180 kg An inspection and test run are possible by arrangement. Lodpezggipjfx Anusac

Condition: new, input voltage: 230 V, - Shaft diameter 40 mm - Can be used horizontally/vertically - Foot control - Emergency stop - Includes 1 set of standard steel rollers Lasdpfolxw Rmex Anuoc - Documentation - 230V

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,400 mm, total length: 1,000 mm, total height: 950 mm, overall weight: 195 kg, input voltage: 220 V, power of feed motor: 1,100 W, secondary voltage: 380 V, number of rollers: 7, Equipment: CE marking, documentation/manual, emergency stop, We produce the “R-PRO 25” Standing Seam Metal Roof Machine with the highest precision on the latest technology CNC processing machines. With the user-friendly, strong, durable and robust “R-PRO 25” Standing Seam Profiling Machine, you can perform your standing seam applications in a quality-oriented manner. As REIS STANDING SEAM TECHNOLOGIES; we always support our customers with spare parts on stock, from production to assambly, from sales to technical service. MAXIMUM MOBILITY AT LOW COST There is no need for large, difficult to carry and costly standing seam roll forming machines, when there is a "R-PRO 25" standing seam machine. With our portable standing seam machine, high precision standing seam panel production is possible without any length limit. QUALITY and TRUST – REIS STANDING SEAM TECHNOLIGIES Every manufactured “R-PRO 25” standing seam machine goes through delicate tests Easy maintenance CE Certificate EU Attestation of Compliance Certificate ISO 9001 DIN EN 349 DIN EN 1037 DIN EN ISO 12100-1/2 DIN EN 13849-1 DIN EN ISO 13850 DIN EN ISO 13857 DIN EN 14121-1 DIN EN 60204-1 2 years of warranty Strong management. Loyal, highly trained team. "R-PRO 25" Standart Features - Standard standing seam height 25 mm - Weight: 195 kg - You can transport with small cars - You can lift it to the roof easily - You can seperate it to four pieces for carrying easily (Standart) - Cabled remote controller (Standart) - Emergency stop button (Standart) - Forward and backward button (Standart) - Material width adjusment (250 mm – 700 mm) (Standart) - Wheels (Locking feature) (Standart) "R-PRO" Optional Features Ledpfx Aohpuhtenujac - Ribbing Attachments (Optional) (R-Pro 25 Plus - R-Pro DUO - R-Pro MAX) - Dijital Encoder (Optional) (R-Pro 25 Plus - R-Pro DUO - R-Pro MAX) - Circular Saw (Optional) (R-Pro 25 Plus) - Manual Guillotine Shear (Optional) (R-Pro MAX) - Sliding Shear (Optional) (R-Pro DUO) Please contact us for more information and prices...

Condition: new, Year of construction: 2026, Bending machine ZB 70/3 H NC Zopf - semiautomatic - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to - adjusting way: 120 mm - weight: 490 kg - dimensions: - colour RAL5012 / RAL7015 NC-CONTROL for ZB 70/3 HA: Ledpfx Aefkz Rbjnusac - two axes controlled - touch screen - memorise of 1000 programs ech 19 steps - interpolation - accuracy of the y-axes 1/10 mm - programmable forward and backward

Condition: good (used), profile bending machine Lsdpjwtph Dofx Anujac

Condition: used, functionality: fully functional, Year of construction: 2013, Sahinler HPK 200 Hydaulic section and pipe bending machine Mil and Shaft Diameter: 200mm Tool and Roll Diameter: 900mm Working Speed: 2-5 m/min Motor Power: 30 kW Bending capacity x15x4 273x5.6 / 10000 mm Ljdpfx Anow D Uqxoueac Diameter biggest roll 9"x6,3 / 4000 mm Diameter top roll 650 mm Diameter upper roll 650 mm Roll capacity section - 3 200x200x18 / 5000 Shaft diameter 200 mm Top roll x15 with prebending min.120x120 / 3000 mm Voltage 3x400 V Working speed 2-5 m/min Power Power max. 30000 W Height 2300 mm Length 2400 mm Width 3400 mm Weight15000 kg

Condition: excellent (used), functionality: fully functional, CURVAPROFILI CLAMP MODEL CM 2000 Ledpfxszfptuj Anueac ROLLER DIAMETER 30 USED MACHINE INTERNAL CODE: SVR 426

Condition: used, Dimensions (l x w x h) approx.: 3200 x 1800 x 1600 mm Weight approx.: 500 kg 3 spindles, Ledsxrlgwopfx Anusac 1 milling spindle, 2 - 3 grinding and milling spindles, feeder belt approx. 100 mm wide, total working length approx. 3000 mm, extendable workpiece support

Condition: used, Year of construction: 2003, LARCON METAL Model: LIJADORA DE RODILLO Number: 29 Year of construction: 2003 kW: 4 RPM: 1500 Laodpfexrz Nbox Anujc

Condition: new, Year of construction: 2026, Bending machine ZB 80/3 H eco NC - with foot pedal - with standard roller set - three driven shafts smooth surface - hydraulic adjusting of the center roller Lodog Ntmhjpfx Anujac - working position horizontal and vertical - NC control with touch screen - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg - dimensions: 900x600x1100 mm

Condition: good (used), Year of construction: 2008, 1 used profile ring rolling machine Make: Profiroll Bad Düben Model: URWA 250 Year of manufacture: 2008 Technical data: Control: SINUMERIK 840 D Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100–700 rpm Drive power: 110 kW Mandrel diameter: 45–100 mm Length: 2,600 mm Width: 2,600 mm Laedpeyurx Tofx Anuoc Height: 2,600 mm Weight: 12.5 t Scope of delivery: Centralized lubrication Infinitely variable speeds Proportional measuring system Linear mandrel guide Mandrel run-out monitoring Process data management Rolling equipment: Feeder: 130–190 mm / W 46–80 mm Magazine: 130–190 mm Measuring head Separate cooling unit Electronic setup assistance Process visualization Ring stopper and turning device for rotating the rolled part

Condition: good (used), *DESCRIPTION* Professional pyramid bending machine, ARMO-EDNOR type 32E60 3HV, year 1995. French manufacture, L’Arbresle. Machine mounted on a cast iron base for bending steel, stainless steel, and aluminum profiles. Supplied with a large set of steel and nylon rollers for round, square, flat, and angle tubes. Versatile machine for metalwork, locksmithing, and decorative ironwork. *TECHNICAL SPECIFICATIONS* Brand / Type: ARMO-EDNOR 32E60 3HV Year: 1995 - CE Standard Manufacturer: 69210 L’Arbresle - France Type: Manual 3-roller pyramid bending machine Shaft Diameter: 32 mm Center Distance: 60 mm Flat Bending Capacity: 60 x 12 mm Round Tube Bending Capacity: Ø 60.3 x 3.2 mm Position: Horizontal / Vertical Weight: Approximately 250 kg *EQUIPMENT INCLUDED* - Complete machine on original base - Manual lowering handwheel - *Large set of rollers*: Steel sets for round tubes Ø..., square tubes..., rollers for flat, angle, and U-shaped steel. + Nylon sets for stainless steel/aluminum, leaving no marks. See photo. *CONDITION* Very good mechanical condition. Cast iron machine, virtually indestructible. Original paint. Tested: smooth, progressive lowering, no play in the shafts, trapezoidal screw in good order. Rollers in good condition. *ADVANTAGES* 1. *French manufacture*: COMAC cast iron, simple and robust mechanics. 2. *Set of rollers*: €1500 worth of tooling included. Significant cost savings. Lsdpozczwzofx Anueac *APPLICATIONS* Locksmithing, metalwork, decorative ironwork, interior design, furniture, gates, railings, handrails, scrolls.

Condition: used, total length: 1,330 mm, total width: 1,040 mm, total height: 1,150 mm, Empty weight: 1.800 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive: Hydraulic - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Shaft diameter [mm]: 75 - Top roll diameter [mm]: 225 - Capacity diameter round [mm]: 60 - Transport dimensions: 1330mm x 1040mm x 1150mm (l x w x h) - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 1 Laedpfxjxuf Sle Anuec Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, actuation type: mechanical, number of rollers: 3, overall weight: 5,000 kg, Equipment: documentation/manual, Profile Bending Machine PARMIGIANI Mod. MERCORI – M. Used. Three-roll horizontal profile bending machine. Immediately available while stocks last. Visualized adjustment control. Supplied complete with tooling for bending flat bars and tubes. New electrical cabinet. User and maintenance manual included. Bending capacity: angle 120 x 120 x 12: min. Ø 1200 mm; U 160 vertical: min. Ø 1000 mm; Flat bar vertical 140 x 40: min. Ø 1000 mm; Flat bar horizontal 120 x 30: min. Ø 1600 mm; Tube 4″: min. Ø 1200 mm. Weight: 5000 kg. Motor power: 380 V, 12 Hp. Laedpsyxwdwefx Anusc

Condition: excellent (used), functionality: fully functional, Catalogue number 7364 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm Ledpszcd D Rofx Anuoac - spindle diameter: 40 mm - max. tool diameter: 220 mm - working table (L/W): 410x1000 mm - motor: 11 kW - 2 pneumatic material clamps - extraction port diameter: 160 mm - dimensions (L/W/H): 1070x1260x1400 mm - weight: 650 kg ADVANTAGES – Made in Germany – Additional set of cutters + copy template – Not repainted – Used milling machine, in very good condition Net price: 33,900 PLN Net price: 8,070 EUR according to 4.2 exchange rate (Prices may change with significant exchange rate fluctuations)

Condition: used, Roll sets for profile bending machine, 3-roller ring bending machine HERKULES WETZLAR The rollers are suitable for a HERKULES WETZLAR profile bending machine, type BO 238 N. Shaft diameter: 60 mm with an 18 mm keyway. 2 pieces, roller set No. 1, roller diameter 110 mm, roller width = 180 mm. 2 pieces, roller set No. 2, roller diameter 160 mm, roller width = 40 mm. Laodpfx Aoglaq Ionuoc 3 pieces, roller set No. 3, roller diameter 150 mm, for pipe diameter Ø 33 mm, roller width 87 / 115 mm. - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm, without keyway. The machine had 2 driven rollers. Total weight of all rollers: 57 kg. Good condition.

Year of construction: 2005, condition: good (used), machine/vehicle number: 8382, 2-head welding machine for PVC profiles Ljdszdq Ttspfx Anuoac

Condition: new, Machining center with 4 CNC-controlled axes for machining profiles made of aluminum, PVC, and steel Comparable to Emmegi, Elumatec, Fom, Pertici, etc. Machine frame in a stable welded construction, stress-relieved by annealing, with hardened linear guides Protective cabin covering the entire machining length Pneumatically opening protective door Milling spindle: 3.8/4.6 kW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with ISO 30 tool holder with minimum quantity lubrication system for the tools with level monitoring Tool magazine: 5 positions, on the left side in the machine bed, for holding drilling, milling, threading tools, angle head, and disc cutters up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm automatic positioning via device on the Z-axis Workpiece positioning: one pneumatic reference stop each on the left and right on the A-axis Travel distances: X-axis 3500 mm Y-axis 370 mm Z-axis 348 mm A-axis ±90° Travel speeds: X-axis 70 m/min. Y-axis 30 m/min. Z-axis 30 m/min. A-axis 60°/sec Maximum working areas: X-axis 3270 mm Y-axis 250 mm at 0°, 116 mm at ±90° of the A-axis Z-axis: 170 mm at 0°, 200 mm at ±90° of the A-axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-sided machining by swiveling the A-axis 90°-0°-90° End face machining using disc cutters Operating modes: One profile bar over the entire machining length Two profile bars in divided machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screws, and guides, with level monitoring Operation: 18.5" TFT Mouse + keyboard Connection data: Electrical: 400 V/50 Hz (3-phase + N + PE), 16 A, Delivery without power cable Pneumatic: Pressure 6 - 8 bar Lasdpfx Aewrcwpsnujc Dimensions and weight: Length: 5800 mm Width: 1640 mm Height: 2000 mm Weight: 2000 kg incl.: Graphical programming software CM3D/CAD3D Barcode reader Teleservice with remote maintenance/diagnosis for 1 year after commissioning

Condition: good (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: CA90H2 PIPE BENDING ROLL, shaft diameter: 90 mm, roller diameter: 260 mm, rotational speed (min.): 8 rpm, rotational speed (max.): 8 rpm, overall weight: 1,000 kg, total length: 1,260 mm, total width: 1,000 mm, total height: 1,260 mm, power: 3.68 kW (5.00 HP), input voltage: 380 V, type of input current: three-phase, operating speed: 8 mm/s, roll diameter: 260 mm, Equipment: documentation/manual, emergency stop, PROFILE BENDING ROLL SHAFTS OUTPUT 90 MM - PIPE BENDING ROLL MARGI CA90H2 YEAR 2007 SHATS OUTPUT SIZE 90 MM SET OF UNIVERSAL ROLLERS SIZE 260 MM LATERAL CORRECTOR ROLLERS LEFT/RIGHT SIDE SCREW ADJUST 4 SET OF ROLLERS FOR TUBE BENDING MM 61 - 78 – 90 – 116- CONSOLE ELECTRIC MOVABLE ON WHEELS ALL THE CONTROLS CENTRALIZED DIGITAL POSITION READOUT OF BENDING ROLLS UPPER ROLL DRIVEN MOTORIZED ELECTRIC POWERED WITH GEAR UNIT SIDE ROLLERS HYDRAULIC ADJUSTMENT POWERED INDEPENDENT WITH PISTON Lodpfewkrr Tex Anujac MACHINE REVERSIBLE CAN WORK WITH SHAFTS VERTICAL/HORIZONTAL. SAFETY AND EMERGENCY STOP EQUIPMENT INSTALLED WITH THE MACHINE MANUALS AND SCHEMATICS IN ORIGINAL ALONG WITH THE MACHINE WEIGHT 1000 KG DIMENSION 1260 X 1000 X H 1260 MM