Used Fliegl Zhks 350 - 27M³ for sale (6,284)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information Chassis, tipper semi-trailer Fine-grain steel welded construction, in basic lightweight design, turntable with interchangeable 2 kingpin Curved front panel, patented 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without shock absorption Underrun protection, foldable Partial fender Tow hitch at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1. axle, automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the display in the towing vehicle, via EBS, without installation in the truck (this must be available in the truck. Only on base tires) Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal ("flashing side lights") Ijdei Ri Niopfx Abfoth 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw fitting, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinder with ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder externally on the front wall. Membrane - rear wall Rear wall as a swing gate with double-joint hinge, externally supported with double hook locking. 2 clamping screws with cam closures on the lower sides. Side walls continuously 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Standing platform with ladder, connection plate for air/electricity and brake with large space for best possible operation. Rollover tarpaulin, single-sided for depositing on the right, with central locking on the left Approval country / signs Germany with Dekra approval and certificate (according to §13 EG - FGV) Body strength according to EN 12642 24/7 service hotline prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau 10-year warranty against rust-through Support legs, black coated Body, RAL color of your choice, single color, subject to availability Rollover tarpaulin, RAL color of your choice, single color Also available with hydraulic rear wall

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,750 kg, maximum load weight: 30,250 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information Chassis, semi-trailer, tipper Fine-grained steel welded construction, in a basic lightweight design, drawbar plate with 2 interchangeable kingpins Curved front closure, patented 24 tons, 2-speed landing gear, single-sided operation, with a straight lower part, without thrust compensation Underrun protection, foldable Half-shell fenders Tow hitch at the rear Axles + suspension SAF disc brake axles with a 430 mm disc diameter Axle/chassis laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle, automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rusting Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 keyed coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with raising and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the tractor unit's display, via EBS, without truck installation (this must be available in the truck. Only on standard tires). Electrical system Isdji Ri Nfspfx Abfsth 24 volts, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal ("flashing side marker lights") 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole keyed sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw fitting, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Tippers Steel round tipper body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinders and a ladder on the front wall. Greenline - conical and aerodynamic tipper body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a pivoting flap with a double-hinge hinge, externally mounted with 2-fold hook lock. 2 clamping screws with cam locks on the sides at the bottom. Side walls are continuously 4 mm thick, floor is 4/5 mm thick, wear-resistant and weight-optimized construction Standing platform with ladder, connecting plate for air/electricity and brakes with ample space for optimal operation. Rolltarp, one-sided for storage on the right, with central locking on the left Registration country/signs Germany with Dekra inspection and certificate (according to §13 EG - FGV) Body strength according to EN 12642 24/7 service hotline prepared for license plate holder, single-row Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau 10-year warranty against rusting Support legs, black coated Tipper body, RAL color of your choice, solid color Rolltarp, RAL color of your choice, solid color Available in a thermally insulated version!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT23502035606, empty load weight: 5,325 kg, maximum load weight: 26,675 kg, overall weight: 32,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,490 mm, suspension: air, tire size: 385/65 R22,5", color: grey, trailer brake: trailer braked, The images shown are archive photos; the vehicle may still be in use! Chassis for Tipper Semi-Trailer Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin and two kingpin positions Kingpin installed in the forward position Curved front panel (patented) 24-ton, 2-speed landing gear, single-sided operation, with semi-circular lower section and straight mounting plate, with drawbar equalizer Unhitching under load is not possible; when unhitched, the vehicle must stand with a rearward slope. Free rear swing clearance approx. 2100 mm in the rear position and approx. 2600 mm in the forward position! Wheel chocks with holder Aluminum side underrun protection Foldable rear underrun protection Rear underrun protection with spring assist for easier operation Half-shell fenders Splash guards behind the last axle in asphalt design, hinged on the fender, with hook-up option at the top of the fender, fender shortened Tarp bar with holder Tow hook at the rear (not for Revolution model) Axles & Suspension BPW or SAF drum brake axles, manufacturer’s option Axles in off-road version "Axles/chassis laser measured" to reduce tire wear and fuel consumption Air suspension Itsdpfex Dkpnjx Abfeh 1st axle with automatic lift axle, including forced lowering and starting aid, operation via "3x braking" (starting aid functions up to a 30% axle overload and up to a max. speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" 10-year rust-through warranty Braking System 2-line compressed air braking system Color-coded lines for easier servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line 24 Volt EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by traction vehicles capable of ensuring ABS function! With lift & lower valve Vehicle stability control system Paver brake, electrically controlled from the truck, without truck installation Automatic tipping lowering with shut-off valve Wheels and Tires 385/65 R22.5, manufacturer’s option Steel rims, factory silver Electrics 24 Volt, multi-chamber taillights, yellow LED side marker lights 2 white LED front position lights 2 white/red lane marker lights at the rear 1 x 15-pin socket at the front, without connecting cable 1 LED spotlight with integrated "Osprey" camera as trough camera (technical inspection required upon order) LED strobe light(s) at rear, controlled via switch in the truck, without truck installation, wired to pin 12 Upon order, specify pin allocation! Reversing camera system with color flat-screen monitor, wireless connection to monitor, monitor with suction mount and power supply via 24V vehicle socket Registration/Country & Plates Germany With Dekra approval and certificate (per §13 EC-FGV) 24/7 Service Hotline Body stability to EN 12642 Prepared for single-line license plate holder Conspicuity markings with reflective tape to ECE R 048, white at the side and red at the rear Paintwork Frame: DB 7350 Novagrau "10-year rust-through warranty" Landing legs: Black coated Body/Side panel: Scania Urban Grey 2389173 Sliding tarp: RAL 7038 Agate Grey

Condition: used, axle configuration: 3 axles, first registration: 07/2005, color: other, Year of construction: 2005, Empty weight: 4.200 kg Axle 1: left 4-8 mm right 10-10 mm Iedpfxjywtcts Abfsth Axle 2: left 10-10 mm right 12-12 mm Axle 3: left 4-8 mm right 4-4 mm We have the possibility to stack trailers!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 55 kg, maximum load weight: 33,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,410 mm, suspension: air, tire size: 385/65 r22.5, tire condition: 100 %, Additional Information Chassis Fine-grain steel welded construction, lightweight design, kingpin plate with 2 interchangeable kingpins Curved front end, patented Telescopic support in the center, uncoupling with load not possible; in the uncoupled state, the vehicle must be tilted backwards. Chocks + holder Underrun protection, foldable Half shell mudguards Integrated mudguard holder, surface designed to repel stones Splash flaps behind the last axle in asphalt design, attached to the mudguard with hinges, with the option to be hooked onto the mudguard at the top, mudguard shortened Towing hook at the rear Axles + Suspension SAF drum brake axles Axle/suspension laser-aligned, reducing tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, incl. forced lowering and starting assist; operation via 3x braking (starting assist is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism Braking System 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle driving stability system Wheels & Tires 385/65R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics High-pressure cylinder max. 250 bar, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic cylinders and ladder on the front wall. Membrane rear wall Rear wall as a pendulum flap, externally supported with double hook locking. 2 clamping screws with lever closures on the side at the bottom. Side walls continuous, 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Body in insulated version, Fliegl Asphalt Profi Thermo, body insulated at the front, side, bottom and rear with Fliegl Isotherm. BASIC cover, tarpaulin cladding Standing platform with ladder, connecting plate for air/electrical and brake connections with large space for optimal operation. Roll-up tarpaulin on one side for storage on the right, with central locking on the left Operating Instructions For transport of salt, lime, etc., we recommend a tilting cylinder with a hard chrome-plated piston rod to protect against rust The specified total weight is technically possible; depending on the load, the total weight may not be reached while adhering to the permissible axle/support and kingpin loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Isdpoi Rix Ssfx Abfoth Country of Registration/ Signs Germany with Dekra approval and certificate (according to §13 EG - FGV) Body strength according to EN 12642 24/7 service hotline Manufacturer's certificate for thermal vehicles according to RS 10 - 2013 prepared for license plate holder, single row Contour marking

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2013, Equipment: ABS, Fliegl walking floor * EZ 22.05.2013 * 3 axles * 92 cubic meters * 1st axle lift axle * 1 vehicle owner / 1 owner * German trailer / German walking floor * Empty weight: 7,525 kg * Permissible total weight: 35,000 kg * SDS 350 * Tires: * 1st axle 385/55 R 22.5 v.l. 5 mm & v.r. 8 mm * 2nd axle 385/55 R 22.5 v.m.l. 10 mm & v.m.r. 9 mm * 3rd axle 385/55 R 22.5 h.l. 5 mm & h.r. 8 mm * All information without guarantee * The HU/SP will be renewed before the sale / We renew HU/SP ("TÜV") before Sale * Further information and criteria on additional services * Repainting, retrofitting possible * Short-term license plate / Customs license plate * Transfer and shipment possible * Help with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 Iodjqk Tf Tepfx Abfsth * Leasing and financing possible * Own workshop * Mówimy po polsku. * We speak English. * Goworim po russki * The repainting in your desired color is possible in our house at a reasonable price and in good quality. * You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2015, loading space length: 13,600 mm, loading space width: 2,520 mm, Equipment: ABS, Schmitz Cargobull S01 Flatbed with Lifting Axle and SAF Axles Ref. No. for inquiries: 1225958 * ABS * EBS * 3 axles, air-suspended * Lifting axle * Disc brakes * SAF axles Loading area dimensions: Length: 13,600 mm Width: 2,520 mm Tyres: 1st axle: 385 / 55 R 19.5 30% air-suspended / lifting axle 2nd axle: 385 / 55 R 19.5 30% air-suspended 3rd axle: 385 / 55 R 19.5 30% air-suspended Iedpfeyavigex Abfoth ----Price: €3,900 + 19% VAT For further questions, you can reach us at the following phone numbers: * We speak: German, English, French, Polish, and ????? Errors, omissions, and prior sale reserved.

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2013, loading space length: 13,600 mm, loading space width: 2,520 mm, Equipment: ABS, Schmitz Cargobull S01 Platform Lift Axle Aluminum Side Walls Stakes STEEL TRANSPORTS Internal Reference Number for inquiries: 0326236 * ABS * EBS * 3 axles air-suspended * Lift axle * Disc brakes * BPW axles * Aluminum side walls * Stakes Loading area length: Length: 13,600 mm * Width: 2,520 mm Tires: 1st axle: 385 / 65 R 19.5 20% air-suspended / lift axle 2nd axle: 385 / 65 R 19.5 20% air-suspended 3rd axle: 385 / 65 R 19.5 20% air-suspended ---Price: 9,900 EUR + 19% VAT Iodpjyulw Nefx Abfeth For further questions, you can reach us at the following phone numbers: * We speak: German, English, French, Polish, and ????? Subject to typing errors, errors, and prior sale.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34002026856, empty load weight: 5,592 kg, maximum load weight: 29,408 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", color: white, The images are archive images! The vehicle may be in use! Chassis: Saddle for trucking company Fine-grained steel welded construction in reinforced Scandic design, saddle plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock profile" for securing lashing straps Lashing rings for use in the "Load-Lock profile", 6 tons each, loose 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Free swivel radius to the support leg approx. 2200 mm, support leg dimension approx. 2350 mm 2 shims with holder Side impact protection, aluminum Under-run protection, galvanized steel Quarter panel fenders in front of and behind the axle unit with anti-spray flaps, only on the last axle 1 plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock (lock not included) 1 pair of pole pockets recessed in the outer frame/floor at the very front, inner dimension 83 x 83 mm 2 steel poles, B=80/ D=80/ L=1200 mm, hot-dip galvanized Note: The pole pockets / insertion poles are not designed for the sole securing of long materials, pipes, etc. without lashing 4 pairs of lashing eyes, yellow marked Axles + Suspension Itodpfxjx Rq Sle Abfjh 3 BPW drum brake axles "Axle/chassis laser-measured" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS brand Wabco Premium, electronic braking system with EBS socket at the front, without connecting cable, Wabco Premium incl. open CAN BUS for telematics Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plate lighting in LED (Note! In certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Front panel / corner posts at the front 2 580 mm high, corner posts made of steel in a full volume design, release mechanism for side tarpaulin on the front panel "Crash-Blocker", at the bottom inside at approx. 140 mm height with steel ram protection Sliding battens Rows of wooden sliding battens Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Tensioning devices made of stainless steel Floor Sieve plate approx. 30 mm thick, on longitudinal crossbeams for high point load capacity for forklift axle load up to max. 7100 kg Note: Floor deformation due to weather conditions possible (no guarantee)! Rear panel / corner posts at the rear Corner posts at the rear made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal swivel bar locks each Roof Sliding tarpaulin, rear lift that can be folded up, with tarpaulin that can be slid from back to front, tarpaulin color: white optimal rain gutter at the rear, at the top of the rear beam, above the doors Country of approval / plates Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the side a

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34202036640, empty load weight: 6,213 kg, maximum load weight: 35,787 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2025, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22,5", color: yellow, The images shown are archive photos; the vehicle may still be in use! Approx. fifth wheel height: 1200 mm Chassis: Semi-trailer tipper Basic lightweight construction, kingpin plate with interchangeable 2" kingpin, patented curved front bulkhead Folding underrun protection, underrun protection with spring assistance for easier handling Integrated mudguard bracket with stone-repellent surface Axles & Suspension: SAF disc brake axles with 430 mm disc diameter; axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle including forced lowering and starting aid, activation by "3x braking" (starting aid is functional up to a 30% axle overload and up to a maximum speed of 25 km/h) Braking system: 24 Volt EBS electronic braking system with EBS socket at the front (no connection cable), test port for brake cylinder pressure routed to the outside of the EBS module, with raise & lower valve Paver brake, electrically operated from the truck without truck installation, automatic tipper lowering with shut-off valve "TPMS" tire pressure monitoring system as per ECE R141, display via monitor in towing vehicle through EBS (requires appropriate truck setup; only for standard tires) Axle load detection via EBS-CAN bus signal for display in the cab; truck must be preconfigured, no truck installation Wheels and Tires: 385/65 R22.5 steel rims Electrics: Side-mounted yellow LED lights synchronised with indicators (flashing side lights) 2 white front position LED lights 2 white/red rear marker LED lights LED work lights on both sides; 2 additional work lights integrated into the rear Hydraulics: Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO (power take-off) Body/Tub: Steel round body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mount. Internal ladder at the front bulkhead Greenline - conical and aerodynamic body shape “Membrane” tailgate Tailgate as hydraulic rear door opening upwards; clearance approx. 2,200 mm Side walls continuously 5 mm thick, base continuously 8 mm thick Body is insulated version, Fliegl Asphalt Profi Thermo, body insulated at the front, sides, bottom, and rear with Fliegl Isotherm "Flip Top sliding cover", automatic rear lock as folding hoop. Cover built to front. Electrically operated cover with 7-pin plug (charging plug) at front, no connection cable, no truck installation; operation on trailer and via remote control. Operational notes: Itedpfxjyylapj Abfeh For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent damage and corrosion from the material. The specified gross weight is technically possible, but depending on the load, the gross weight may not be achievable while observing permissible axle, support, and coupling loads. (Improper load distribution may lead to poor driving and tracking performance) Paintwork: Frame: DB 7350 Nova Grey "10 years warranty against corrosion" Support legs: black coated Body: RAL 1007 Narcissus Yellow Roll tarp: RAL 7038 Agate Grey

Condition: used, machine/vehicle number: WFDFLT33502014693, empty load weight: 6,300 kg, maximum load weight: 28,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2020, tire size: 385/55 r19,5, Further information Welded fine-grained steel construction, saddle plate with replaceable 2 king pins, 14 pairs of lashing eyes embedded in the outer frame, 2.5 tons each, outer frame with Load-Lock profile for lashing strap attachmentNote! Cannot be used with drop sides! 24 t. 2-speed support winch, single-side operation, with semicircular lower section and straight connecting plate, with thrust compensation 2-stage pull-out ladder at the rear, side door locks, wheel chocks with holder, aluminium side collision protection, galvanized steel underride guard, quarter-shell mudguards in front of the 1st axle and behind each axle, with anti-spray flaps behind each axle, impact protection at the rear, spare wheel holder for 1 e-wheel, with wheel fastening set, plastic tool box SAF disc brake axles, air suspension 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable front coupling heads, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, vehicle driving stability system, TPMS Haldex tire pressure monitoring system, in conjunction with Infocenter 24 volt, multi-chamber lights in LED, amber LED lighting at the side, 2 white position lights at the front in LED, 2 white/red lane departure warning lights at the rear in LED, 2 x 7-pin interchangeable sockets at the front, without connecting cable, LED safelight, top in corner stanchions at the rear Floor: screen-printed panels approx. 30 mm thick, cross joints with Omega inlay, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front end wall/front corner stanchions: 2,600 mm high, steel corner stanchions in volume design, release device for side tarpaulin on front wall, bottom inside at approx. 140 mm height with steel impact protection Ijdpfxokyrlzo Abfoth Center stanchions: 5 sliding stanchions can be moved along the entire length, with 4 insertion pockets and a long pocket at the bottom. (3 x in FR.- right and 2 x in FR.-left), 5 stanchion positions (3 x in FR.- right and 2 x in FR.-left), aluminum insertion slats Rear steel corner stanchions up to lower edge of roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal espagnolette locks each Tarpaulin with welded-in horizontal and vertical straps, reinforcements for stanchions Quick Lock system for side tarpaulin with central lock, one-sided in FR left, stainless steel tension locks in FR right, tarpaulin with recessed vertical slats as load securing tarpaulin, one-sided in FR left (then only 2 pairs of central stanchions in FR left) Roof: sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-roof rail for automotive industry, internal width between the roof rails approx. 2,490 mm, tarpaulin color: white, lifting roof, can be raised mechanically by approx. 380 mm, lifting roof can be opened when doors are closed Country of registration: Germany, test approval according to EC 2007/46, load securing certificate according to EN 12642 XL, 24/7 service hotline, prepared for single-line license plate holder, warning sign according to ECE - 70, reflective strips: white, continuous on the side tarpaulin at the bottom and at the top in the corners Reflective stripes: red, all-round on the rear porta

Condition: used, machine/vehicle number: WFDFLT33502019721, empty load weight: 6,927 kg, maximum load weight: 28,073 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2016, tire size: 385/55 r19,5, Fine-grained steel welded construction, fifth-wheel plate with replaceable double kingpin. Note! For frame neck height of 30 mm, the truck wheelbase must not exceed 3,700 mm! Outer frame slightly slanted with Load-Lock profile for lashing strap attachment. Note! To attach straps in conjunction with sideboards, the sideboards must be opened! Not permitted in the neck area! 10 additional pairs of lashing rings recessed into the outer frame, each rated at 2.5 t, outer frame with Load-Lock profile for lashing straps. Note! Not usable with sideboards! 24 t, two-speed landing gear, single-sided operation, with straight lower section, without thrust compensation. Folding front supports extendable and tiltable outwards in front of the bulkhead. In driving position, set as far inward as possible (for detaching under load), without supports. Extendable ladder at the rear, side door retainers, chocks with holders, aluminium side underrun protection, galvanized steel rear underrun protection, quarter mudguards in front of and behind each axle, antispray mud flaps behind each axle, rear underrun protection. Heavy Blocker rear underrun protection, heavy duty pallet stops on both sides, approx. 20–25 mm high, with lashing option every 200 mm. Load height is reduced by approximately 20–25 mm. Plastic toolbox included. SAF disc brake axles, air suspension, without lift axle. 2-line compressed air braking system, spring-loaded parking brake, 2 tamperproof coupling heads at the front, no connecting line, EBS (Electronic Braking System) with EBS socket at the front, without connection cable. Caution: The trailer may only be towed by tractors that ensure the effectiveness of ABS! With lift and lower valve, vehicle stability control system. 24 volt multi-chamber lights, yellow LED side marker lights, 2 white position lights at the front, 2 white/red contour lights at the rear, 2 × 7-pin and 1 × 15-pin tamperproof sockets at the front, no connection cable included. Floor: Front area with steel floor and anti-slip coating, phenolic plywood panels approx. 30 mm thick, transverse joints with omega insert, longitudinal bearers for high point loading capability, suitable for forklift axle loads up to max. 7,100 kg, steel/chequer plate surface in wheel area. Front bulkhead/corner stanchions: Height 2,580 mm, steel corner posts in volume design, release system for side curtain at front bulkhead, inner lower edge equipped with steel impact protection at approx. 140 mm height. Intermediate stanchions: 3 pairs of sliding posts adjustable along the full length, with four-fold insert pockets and long lower pocket, 3 pairs of upright positions, aluminium insert slats. Rear corner stanchions in steel up to lower edge of roof, curtain attachment with round tube and tensioning ratchet, rear portal doors, double-leaf with two internal locking bars per leaf. Itedpskyrlwjfx Abfsh Curtain with welded horizontal and vertical belts, tension latches made of stainless steel, customer lettering on the rear portal. Roof: Sliding roof cover, rear end liftable, roof can be pushed from rear to front, L-roof beam for automotive industry, internal width between roof beams approx. 2,490 mm, curtain colour: white. EcoLift - roof liftable by approx. 380 mm with gas spring assist, Anti-Ice system with central hose and automatic ventilation. Country of registration: Germany, type approval in accordance with EC 2007/46, load securing certificate according to EN 12642 XL (only valid in conjunction with 4

Condition: used, empty load weight: 7,950 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2013, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,850 mm, loading space volume: 95 m³, tire size: 385/55 R22,5, wheelbase: 1,310 mm, color: black, Equipment: ABS, Disc brake EBS Payload 27,050 kg Air-lift suspension Roll-up tarpaulin Platform Itedpfsuiytlsx Abfjh SAF axles Alcoa aluminum rims Lifting and lowering device Lashing rings Errors excepted

Condition: used, empty load weight: 7,950 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 01/2013, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,850 mm, loading space volume: 95 m³, tire size: 385/55 R22,5, wheelbase: 1,310 mm, color: black, Equipment: ABS, Disc brake EBS Payload 27,050 kg Air-lift suspension Roll-up tarpaulin Platform SAF axles Alcoa aluminum rims Lifting and lowering device Lashing rings Errors excepted Itedpfx Abeuiyvyofsh

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,200 kg, maximum load weight: 33,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,110 mm, suspension: air, tire size: 385/65R22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. More information Chassis, Saddle, Tipping Trailer Fine-grained steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 kingpin Curved front end - Patented Telescopic support in the center, uncoupling with load is not possible, in the uncoupled state, the vehicle must be tilted backwards. Chocks with holder Under-ride guard, foldable Half-shell fenders Integrated fender holder, surface repels stones Tarp rail with holder Towing hook at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Isdpfxei Ri A Io Abfeth Axle/chassis laser-aligned, reduces tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving Stability System Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via display in the towing vehicle, via EBS, without installation in the truck (this must be available in the truck. Only on standard tires). Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side, linked to the turn signal "Flashing side marker lights" 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard chrome-plated, with HDK screw socket, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of high wear-resistant HB 400/450 steel. Sloped front wall with externally mounted hydraulic cylinder with access ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder externally on the front wall Membrane - rear wall Rear wall as a hinged flap with double-joint hinge, mounted externally with double hook locking. 2 clamping screws with cam locks on the sides at the bottom. Side walls continuously 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Standing platform with access ladder, connection plate for air/electricity and brake with large clearance for best possible operation. Roller tarp on one side for storage on the right side, with central locking on the left side Country of registration/signs Germany Type approval according to EC 2007/46 Body strength according to EN 12642 24/7 service hotline Prepared for license plate holder, single row Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame: DB 7350 Novagrau "10-year warranty against rust-through" Support legs: galvanized Body: RAL color, solid color Roller tarp: RAL 7035 light g

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902035293, empty load weight: 5,663 kg, maximum load weight: 29,337 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2024, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22.5", color: blue, trailer brake: trailer braked, The images are archive photos // Multiple units available! // The vehicle is still incoming! Chassis Semi-tipper chassis Basic lightweight construction, fifth wheel plate with exchangeable 2" kingpin Patented “Curved” front wall Central telescopic landing leg, uncoupling under load not possible; when uncoupled, the vehicle must be inclined towards the rear 2 wheel chocks with holders Foldable underrun protection Underrun protection with spring assistance for easier use 6 half-shell mudguards Integrated mudguard bracket, stone-repellent surface Splash guards behind the last axle, asphalt version, mounted on mudguard with hinge, top hook-in feature for shortened mudguard Tarpaulin rod with bracket 2 towing hooks at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser alignment for reduced tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, additionally electrically operated from truck, including forced lowering and starting aid, no truck installation required Hot-dip galvanized lift axle mechanism, 10-year corrosion warranty Braking System 2-line compressed air brake system Color-coded line routing for easier servicing Iedsyux H Dspfx Abfsth Spring-loaded parking brake 2 mix-up-proof coupling heads at front, no connecting line 24V EBS, electronic braking system with EBS socket at front, no connection cable With raise/lower valve Vehicle stability control system Driver’s brake, electrically operated from truck, no truck installation required Automatic tipping lower with shut-off valve Trailer Info Module for displaying vehicle data Axle load detection via EBS CAN-bus signal Wheels and Tires 385/65 R22.5”, brand per manufacturer’s choice Polished aluminum rims Protective caps for wheel bolts Electrics 24V, multi-chamber lights, yellow LED side marker lights 2 white LED position lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin error-proof sockets at front, no connection cable LED work lights at both sides Additional integrated LED work lights at rear Hydraulics High-pressure cylinder rated up to 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm Operated hydraulically via truck PTO Body Steel round body in "Stone Master Design" made from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mounting. Interior ladder at front wall Shovel and broom holder external at front wall "Membrane" tailgate Tailgate as pendulum flap, mounted externally with dual hook locking. Two clamping screws with toggle closures at lower sides. Pendulum tailgate spacers—can be hooked into the clamping screws Central grain chute Fliegl S.T.E.P. – foldable front standing platform with folding access ladder, for left-side access Body in insulated version, Fliegl Asphalt Profi Thermo, sheet metal cladding "Flip Top sliding cover", automatic rear lock as folding bow. Cover is extended towards the front. Electric drive cover, with 7-pin socket (charging socket) at the front with no connecting cable, including loose tractor socket, operation on trailer and via remote control. 7-pin spiral connection cable to truck for sliding cover, truck must be equipped with a suitable socket.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902035294, empty load weight: 5,663 kg, maximum load weight: 29,337 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2024, loading space length: 7,200 mm, loading space width: 2,550 mm, loading space height: 3,310 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22.5, color: blue, Year of construction: 2024, The images are archive photos // Multiple units available! // The vehicle is still in transit! Chassis: Semi-trailer tipper Basic lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front panel Central telescopic support, uncoupling while loaded not possible Foldable underrun protection Half-shell mudguards Tarp bar with holder Tow hook at rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned 1st axle automatic lift axle, additionally electrically controllable from the truck, including forced lowering and starting aid, no installation on truck required Braking system 2-line compressed air brake system Spring-loaded parking brake 2 mistake-proof coupling heads at the front, without connecting line 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable Automatic tipping lowering with shut-off valve Trailer info module for displaying vehicle data such as axle loads (not a calibrated scale), mileage, and diagnostic/system messages. Axle load detection via EBS CAN bus signal Wheels and Tires 385/65 R22.5 Polished aluminum rims Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white LED position lights at front 2 white/red lane control lights at rear 2x 7-pin and 1x 15-pin mistake-proof sockets at the front Hydraulics Itsdjyu Rllopfx Abfjh High-pressure cylinder max. 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, without hose connection Body Steel round body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic cylinder mounts Interior with ladder on front wall Shovel and broom holder outside on the front wall Tailgate as a pendulum flap, externally mounted with double hook locking. 2 tension screws with toggle latches on the bottom sides. Spacer for pendulum tailgate, can be hooked into tension screws Side walls 4 mm throughout, floor 4/5 mm thick, wear- and weight-optimized construction Fliegl S.T.E.P. – pivoting front catwalk with retractable access ladder on the left side for lateral access, only in combination with "Flip Top sliding cover" Body in insulated version, Fliegl Asphalt Profi Thermo, insulated at front, sides, bottom, and rear with Fliegl Isotherm panel cover, "Flip Top sliding cover," automatic rear lock with folding bows. Cover deploys forward. Electrically operated cover, with 7-pin socket (charging socket at front without connecting cable, including loose tractor socket, no installation on truck, control on trailer and via radio remote control) 7-pin connecting cable to truck as spiral cable for sliding cover, socket must be available on the truck Operation Notes For transports of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent corrosion from aggressive materials. The stated gross weight is technically possible; depending on cargo, the gross weight may not be reached due to legal axle/support/fifth wheel load limits. Note: Not suitable for chemically aggressive media (e.g. acids, chlorine compounds, sulfur compounds, substitute fuels). Vehicles with loading bodies are intended for non-chemically aggressive loads. Paint finish Frame: DB 7350 Novagrau Support legs: galvanized Body: RAL 5002 ultramarine blue Roll tarp: RAL 5002 ultramarine blue

Condition: used, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2019, loading space length: 7,200 mm, suspension: air, tire size: 445/45 R19,5 160J, color: other, gearing type: other, front tire size: 445/45 R19,5 160J, rear tire size: 445/45 R19,5 160J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Iodpezd Dq Eefx Abfsth

Condition: used, empty load weight: 5,300 kg, maximum load weight: 12,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2010, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 52 m³, suspension: air, tire size: 235/75R17,5 ---/141J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/141J, rear tire size: 235/75R17,5 ---/141J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , --  Misprints, errors and changes reserved, Sample images --, More details at: !, More details: ! Itjdpfx Aozd Dqxsbfoh

Condition: used, empty load weight: 6,520 kg, maximum load weight: 23,480 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2019, loading space length: 8,610 mm, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length drop deck approx. 6.50 m, loading area length total approx. 8.60 m, loading height approx. 900 mm, , Vehicle is offered on behalf of a bank, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Itodpjzdzzhofx Abfeh

Condition: good (used), axle configuration: 3 axles, first registration: 04/2023, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,100 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2023, Equipment: ABS, = Additional Options and Accessories = - EBS - Lift roof = Notes = Number of axles: 3, Tare weight: 6075 kg, Gross vehicle weight: 38000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2023, Customs seal, Lift roof, Sliding roof, Axle type: BPW = Further Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 2 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 11 mm; Tire tread depth right: 10 mm Axle 3: Tire tread depth left: 5 mm; Tire tread depth right: 4 mm Weights Unladen weight: 6,075 kg Payload: 31,925 kg GVW: 38,000 kg Functional Sliding roof: Yes Environment Emission class: Euro 0 Iodpfxozdc Tye Abfsth Condition Technical condition: good Optical condition: good Damage: none Financial Information Leasing price: 334 € per month (default, 60 months); Please inquire for further information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Ask directly about our European warranty package.

Condition: new, functionality: fully functional, overall weight: 16,000 kg, maximum load weight: 13,700 kg, empty load weight: 2,300 kg, loading space width: 2,480 mm, loading space length: 7,750 mm, loading space height: 3,000 mm, machine/vehicle number: Produktpalette, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Tandem Trailer Chassis Welded steel construction with a floor assembly approximately 152 mm high; load-bearing and torsionally rigid steel frame construction. Longitudinal beam floor construction with a load-resistant outer frame and guide tunnels spaced 600 mm apart; tunnels feature guides on top and sides, tunnel height approx. 45 mm; 4 x swap body corner fittings based on a 20-foot standard. 4 side-extending/folding parking feet with dual locking mechanism for a parking height of 970 mm, with support leg rest Side door stops Rear impact protection made of flat bar Pallet stops on both sides, approx. 20 mm high with perforated profile for securing straps; loading height is reduced by approx. 20 mm Floor Screen-printed panels approx. 27 mm thick, for high point load capacity, for forklift axle load up to max. 4,400 kg Front wall/corner stanchions Approx. 2,580 mm high, remainder covered with tarp; steel corner stanchions in full-size design; release mechanism for side tarp on front wall Inner front wall additionally lined with a 1,250 mm high screen-printed panel Center stanchions 1 pair of sliding stanchions adjustable along the entire length, with 4-compartment pockets and a long pocket at the bottom. 1 pair of stanchion positions Slotting Slats 5 rows of wooden V-shaped slotting slats Rear wall/rear corner stanchions Rear steel corner stanchions extending to the bottom edge of the roof, tarpaulin attachment with round tube and tarpaulin tensioning ratchet Rear portal doors, double-leaf, each with 2 internal twist-lock latches Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps, reinforcements for stanchions Stainless steel tensioning fasteners Roof Sliding roof, rear end lift folds up, roof can be slid from rear to front, L-shaped roof rail for the automotive industry, interior width between roof rails approx. 2,490 mm, tarpaulin color: white EcoLift – lifting roof by approx. 380 mm, liftable on both sides, with gas spring assistance, Registration / Plates Country of registration: Germany Fliegl manufacturer’s certificate for body strength in accordance with EN 12642 XL, Ijdokt Ni Uopfx Abfeth Fliegl manufacturer’s certificate for body strength in accordance with DL 9.5, pallet stops on both sides, approx. 20 mm high, loading height reduced by approx. 20 mm Fliegl manufacturer’s certificate for load securing in accordance with VDI 2700, Sheet 12 ff. Pallet stops on both sides, approx. 20 mm high; loading height is reduced by approx. 20 mm Paint Finish Frame Hot-dip galvanized, including passivation Front corner posts Hot-dip galvanized Front wall Aluminum Rear corner posts Hot-dip galvanized Rear wall White

Condition: new, machine/vehicle number: 56c59c8aba35227ffb44c9f75, empty load weight: 11,350 kg, maximum load weight: 26,650 kg, overall weight: 38,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Jumbo semi-trailer chassis Steel welded construction with close transverse beam spacing and reinforced design, low-bed outer frame profile for transporting construction machinery up to 32,000 kg and with a maximum outer width of the construction machinery of 2,550 mm, kingpin plate with two replaceable kingpins. Rear slope of approximately 1,200 mm and 7°. Top-closed ramp with steel/diamond plate. Omega rail on the lower side of the outer frame as a mounting strip for tarpaulins and spacers for the lashing points, not in the wheel area. For a lifting platform, an additional, lightweight outer frame with an omega profile. 24-ton, two-speed landing gear, single-sided operation, with semi-circular lower part and straight connecting plate, with stroke compensation, free swivel radius to the rear approx. 1,950 mm. Foldable rear support. 2 chocks with holder. Aluminum side impact protection. Quarter fender in front of and behind each axle. Anti-spray flaps behind each axle. Steel underrun protection. Spray flaps at the rear across the entire width. 4 stainless steel storage boxes, w=800/h=350/d=350 mm, with polished door, lockable, 2 x on the left and 2 x on the right in front of the 1st axle. Isdpfx Aji Riw Ajbfoth Lifting platform after the gooseneck, approximately 3,000 mm long, hydraulically liftable for crossing over the gooseneck, with mechanical locking in the raised position. (Cylinder angled for good ground clearance, Fliegl standard). Operation on the right + additional operation with a remote control (same as ramp operation). Lifting platform can be raised with the tarpaulin closed! Tarpaulin mounting in the lifting platform area on an additional, lightweight outer frame with an omega profile, lifting platform can be raised with the tarpaulin closed! Lashing points can also be used in the lowered position! Lashing points. Gooseneck: 4 pairs of 5-ton lashing points embedded in the outer frame. 2 pairs of lashing points embedded in the top and side of the outer frame. Low-bed: 8 pairs of lashing points embedded in the top and side of the outer frame, each 10 tons. 9 pairs of 5-ton lashing points embedded in the outer frame. Axles + Suspension SAF drum brake axles. Last axle with trailing arm steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via a hand button. Air suspension with raising and lowering valve + auto-reset function. H & S function with rapid venting. 1st axle automatic lift axle, including forced lowering and starting aid, activated by pressing the brake pedal 3 times (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h). Axle lift below the recommended driving height, therefore no guarantee for tire damage. Wheels and Tires 235 / 75 R 17.5 from leading manufacturers. Steel rims in twin arrangement, factory silver. Braking System 2-line compressed air brake system. Spring brake parking brake. 2 fail-safe coupling heads at the front, without connection line. EBS, electronic brake system with EBS socket at the front, without connection cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Axle load detection in the truck via EBS, without truck installation (no calibrated scale). Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side. 2 white position lights at the front, in LED. 2 white/red marker lights at the rear. 1 revolving beacon with holder, switched via parking ligh

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 1 pair of removable guide rollers, additional 4 container locks with sturdy 20"-based arms for swap bodies 7.15 and 7.45 Swivel frame with heavy-duty ball bearing swivel ring Wheel chocks with holder Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Rear mud flaps across the entire width (not compatible with forklift mount) Quarter-shell front fenders and half-shell rear fenders *Towing equipment for trailer turntable Towing fork with certified 40 mm tow eye Towing fork mechanically adjustable in length by approx. 6 x 100 mm (approx. 1900–2500 mm), towing fork length set to 2200 mm *Axles + Suspension BPW or SAF drum brake axles, at the manufacturer’s discretion “Laser-aligned axles/chassis” to reduce tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded piping for easy maintenance. Air reservoir: 180 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, EBS, Electronic Braking System with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift/lower valve, hold function in both lower and lift positions Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly Itodozfp Uxjpfx Abfeh *Wheels and Tires 235/75 R17.5, brand selected by the manufacturer Steel rims in twin configuration, factory silver *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting linked to the turn signals (“flashing side lights”), LED license plate lighting (Note: With certain towing vehicles, false diagnostics may occur even though the function is working properly) 2 white LED front position lights 2 white/red LED rear lane-keeping lights 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable, LED work lights on both sides (activated via reverse light) 2 additional LED work lights at the rear, activated by the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated by the reverse light *Country of Registration / License Plates Germany With DEKRA inspection and certification (in accordance with §13 EG - FGV) 24/7 Service Hotline Prepared for single-line license plate holders Contour markings with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint finish Hot-dip galvanized frame, including passivation “15-year warranty against rust-through” Drawbar: galvanized or black, at the manufacturer’s discretion Customized transport solution

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,950 kg, maximum load weight: 15,050 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,080 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Fliegl “V-Stream” frame Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy arms based on 20" dimensions for 7.15 m and 7.45 m swap bodies (Note: When used in combination with the impact guard, the guard protrudes beyond the 7.15 m swap body) Note! Not suitable for 20" containers, or only possible if the container has a tunnel or opening at the front center measuring approx. 200 mm in length and 800 mm in width! Swivel mount with heavy-duty ball bearing swivel ring Wheel chocks with holders Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Itjdjzfp S Dspfx Abfsh Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Quarter-shell fenders in front and half-shell fenders in the rear Includes mud flaps for fenders Large Fliegl mud flap mounted transversely on the underrun protection at the rear *Trailer coupling system (turntable) Drawbar with certified 40 mm drawbar eye *Axles + Suspension SAF disc brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded lines for easy maintenance. Air reservoir capacity: 208 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lift & lower valve + auto-reset function Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly “TPMS” tire pressure monitoring system according to ECE R 141, display in the towing vehicle via EBS *Wheels and tires 445/45 R19.5", brand selected by the manufacturer Steel rims, factory silver *Electrical system 24 volts, multi-chamber lights, yellow LED side lighting Yellow LED side lighting linked to the turn signals “Flashing side lights” 2 white front position lights 2 white/red rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, additional LED work light(s) at the rear, activated via the reverse light LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light *Country of registration/license plates Germany with DEKRA approval and certification (in accordance with §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Chassis galvanized or painted in colour of choice