Used Fliegl Vts S 400 Parab/Hydr. for sale (79,504)

Condition: new, machine/vehicle number: 408ba9a39bbb8087056d6e563, overall weight: 24,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguards 1st + 2nd axle with anti-spray flaps behind each axle, anti-spray flaps in front of and behind 3rd and 4th axle Excavator trough above the rear axles starting to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes each 5 tons in the excavator trough on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) 1 storage box on offset recessed in floor with lid, W=720 mm/ L=520 mm / D= 170 mm Widenings extendable to 3,000 mm (not in rear slope) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Wooden planks 70 mm for widening to 3,000 mm Storage compartment for wooden planks under the loading area Low loader lashing eyes (40 lashing options) 1 pair of lashing eyes on offset per 5 tons 9 pairs of lashing points at the top and sides, each 10 tons, embedded in the outer frame 2 x front on offset Ppjdpfx Aei Ri Daohysr 7 x in the drop deck 6 pairs of lashing holes in the outer frame of the low bed, each with 5 to. (lashing strap attachment) 3 additional pairs of hinged lashing eyes, 10 tons each 1 x inside next to the main frame at the start of the low bed 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Towing equipment Trailer turntable Drawbar with tested 50 mm drawbar eye, drawbar eye inclined 8° / D-value min. 160 kN Axles + suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Offset at the front with steel/ checker plate flooring Then with 70 mm softwood floor, steel/ checker plate covering in the wheel housing area Rear slope with 70 mm softwood flooring Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Hydraulic via tractor power take-off with throttle, actuation on the left side in FR Hydraulic connection with SVK plug NW 10/3, incl. connection hose Country of approval / plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Warning sign according to ECE - 70 Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Drawbar Galvanized

Condition: new, machine/vehicle number: 15431365fe5515297a6a9fb05, overall weight: 24,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguards 1st + 2nd axle with anti-spray flaps behind each axle, anti-spray flaps in front of and behind 3rd and 4th axle Excavator trough above the rear axles starting to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes each 5 tons in the excavator trough on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) 1 storage box on offset recessed in floor with lid, W=720 mm/ L=520 mm / D= 170 mm Extensions extendable to 3,000 mm Wooden planks 70 mm for widening to 3000 mm Storage compartment for wooden planks under the loading area Low loader lashing eyes (40 lashing options) 1 pair of lashing eyes on offset per 5 tons 9 pairs of lashing points at the top and sides, each 10 tons, embedded in the outer frame 2 x front on offset 7 x in the drop deck 6 pairs of lashing holes in the outer frame of the low bed, each with 5 to. (lashing strap attachment) 3 additional pairs of hinged lashing eyes, 10 tons each 1 x inside next to the main frame at the start of the low bed 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Towing equipment Trailer turntable Drawbar with tested 50 mm drawbar eye, drawbar eye inclined 8° D-value min. 160 kN Axles + suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Offset at the front with steel/ checker plate flooring Then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood flooring Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Pedji Ri A Sepfx Ahyopr covered with wood with spring lift support Country of registration / plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Warning sign according to ECE - 70 Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Drawbar Galvanized or black, at the manufacturer's discretion Drive-on ramps Hot-dip galvanized Attention! These are archive pictures!

Condition: new, machine/vehicle number: d461243f559015adca5bb372c, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguard 1st axle with anti-spray flapsAnti-spray flaps behind 2nd and 3rd axle 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. Extensions extendable to 3,000 mm Storage compartment for wooden planks in the middle of the loading area Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes (40 lashing options) 1 pair of lashing cut-outs in the front side member on offset, 10 tons each 4 pairs of lashing holes in the outer frame, 5 tons each (lashing strap attachment) 7 pairs of lashing mushrooms at the top and sides of the outer frame, 10 tons each 1 x front on offset 6 x in the drop deck First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes) 2 additional pairs of hinged lashing eyes, 10 tons each 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Make: Wabco, Knorr or Haldex Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front offset with steel/ checker plate covering Storage box recessed into the drive-over slope to the offset Then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6,500 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Hydraulic via tractor power take-off with throttle, actuation on the left side in FR Hydraulic connection with SVK plug NW 10/3, incl. connection hose Country of registration / plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Warning sign according to ECE - 70 Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Drawbar Galvanized or black, at the manufacturer's discretion Drive-on ramps Hot-dip galvanized Psdpfxsi Ri Dle Ahyspr Attention! These are archive pictures!

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: WFDFLT44001000966, empty load weight: 9,400 kg, maximum load weight: 30,600 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 10/2010, total length: 12,120 mm, total width: 27,500 mm, total height: 900 mm, suspension: steel, tire size: 235/75 R17,5", color: red, Year of construction: 2010, The images shown are archive photos! Permissible / technical gross weight: 24,000 / 40,000 kg Permissible / technical payload approx.: 14,600 / 30,600 kg Permissible / technical axle load: 24,000 / 40,000 kg Unladen weight (basic version) approx.: 9,400 kg +/- manufacturing tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low bed platform length in wheel track area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loaded bed height in low bed approx.: 900 mm Drawbar height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection 1 plastic toolbox, Extendable width up to 3,250 mm (not at rear bevel) (track width of machine/vehicles to be transported must not exceed outer frame width of 2,750 mm) Storage compartment for wooden boards in the center of the loading area 70 mm wooden boards for extension to 3,000 mm 2 pairs of stake pockets in the low bed recessed into the longitudinal beams Lashing points low-bed: 2 pairs of lashing eyes on neck, 5 tons each 1 pair of lashing eyes in rear bevel 4 lashing eyes recessed in the middle of the floor 2 pairs of keyhole profiles in wheel track area for insertion of longitudinal guide rails and as additional lashing option 6 pairs of lashing pins recessed in outer low-bed frame, 10 tons each 5 pairs of stake pockets recessed in the outer frame of the low bed 4 additional pairs of 10 ton lashing eyes: - 1x on neck - 3x recessed in low bed floor Trailer towing device, turntable design Drawbar with certified 50 mm towing eye Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization front and rear (rocker balancing) Wheels and Tires 235/75 R 17.5" Steel twin wheels, factory silver finish Brake System 2-line compressed air brake system Spring-loaded parking brake 2 foolproof couplings at front, with interconnecting lines to tractor ABS and ALB, with ABS socket at front and connection cable Note: The trailer may only be towed by vehicles ensuring proper ABS functionality! Floor Neck area with steel / checker plate covering Followed by 70 mm softwood floor; in wheel arch area steel / checker plate Rear bevel with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, with wooden covering Hydraulically operated via tractor auxiliary drive Ppsdpoyxq A Hofx Ahyjr Operating Notes At 10,000 kg axle load, an exemption permit is required, only indivisible loads permitted! Note! Oversize length and width require a permanent special permit. When applying for an exemption for regulated heavy haulage, an axle load indicator is required for air-suspended vehicles! This applies to any deviation from § 34 StVZO (axle and permissible total weight overrun), which requires an exemption under § 70 StVZO. The specified gross weight is technically possible; depending on the load, the total weight permitted by axle, support, and kingpin loads may not be achieved. (Poor driving or tracking behavior may occur due to improper load distribution) The images shown are archive photos!

Condition: new, machine/vehicle number: ee3256d63dd23b3ad1bdf9ab0, empty load weight: 10,280 kg, maximum load weight: 13,720 kg, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support Podpoi Ri I Nofx Ahyjpr 2 wheel chocks with holder Aluminum side bumpers Rear splash guards across the entire width Quarter-shell mudguards in front of 1st axle Excavator trough above the rear axles starting to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes each 5 tons in the excavator trough on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 storage box on offset recessed in the floor with cover, W=720 mm/ L=520 mm / D= 170 mm 1st pair of wheel recesses recessed in the low bed in the tramline area after the offset, sloping towards the entrance, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! Frame in the main beam area 400 mm higher than wheel recess.2nd pair of wheel recesses between the axles in the drop center in the tramline area, slanted towards the entrance, length at the bottom approx. 600, approx. 300 mm deep. Note! Frame in main beam area 300 mm higher than wheel recess. Wheel well cover can be pulled out from the main frame, with wooden inserts. Distance from main frame beam to beam outside approx. 1280 mm (wheel well area) Widenings extendable to 3,000 mm, foldable on the wheel recess extensions (widening not in the rear slope and not in the wheel recesses below) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed or under the cargo bed if technically possible Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 1 pair of front lashing eyes recessed on offset, 5 tons each 8 pairs of lashing rings at the top and sides of the outer frame, 10 tons each 2 x at the front on the offset 6 x in the low bed First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 5 pairs of ring lashing eyes embedded in the outer frame, 5 tons each (can be converted to stake pockets) Trailer drawbar Turntable Drawbar with tested 50 mm drawbar eye with 8° inclined drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension with lift & lower valve can be operated separately at the front and rear Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake Trailer Infocenter, for displaying vehicle data such as axle load (no calibrated scales) and odometer Axle load detection via EBS-Canbus signal, for display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Vehicle - driving stability system Duomatic connection at the front, with connecting cable to the truck, EBS, electronic braking system with EBS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights in LED with resistor, amber LED lighting on the side, license plate lighting in LED, (Note! with certain towing vehicles, misdiagnoses may occur even though the function is given) 2 white front position lights in LED 2 white/red rear lane departure ligh

Condition: new, machine/vehicle number: 55d3c5c03e032385649769b1b, empty load weight: 9,900 kg, maximum load weight: 14,100 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with strong ball bearing slewing ring, storage box recessed in Incl. Turntable front end Folding rear support 2 wheel chocks with holder Aluminum side bumper Rear spray flaps across the entire width Widenings extendable to 3,000 mm (not in rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 3 pairs of lashing points, 10 tons each, integrated in the floor at the front 6 pairs of lashing points at the top and sides, each 10 tons, integrated in the outer frame 1 x to the neck area remaining distributed in between Spacing not greater than 1200 mm 1 x rear slope Pedsi Ri I Espfx Ahyopr 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) Towing equipment Trailer turntable Drawbar with tested 40 mm towing eye Please note! With 40 mm drawbar eye, the maximum permissible total weight of the truck is 18000 kg, otherwise 50 mm drawbar eye required. Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front area steel floor, then with 70 mm softwood floor, steel/checker plate flooring in the wheel housing area Rear slope with 70 mm softwood floor Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways covered with wood with spring jack support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany 1 with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame Ral 3002 carmine red 10-year warranty against rusting through Drawbar Galvanized or black, at the manufacturer's choice Drive-on ramps Hot-dip galvanized Attention: Archive pictures!

Condition: new, machine/vehicle number: f79a9f15e7131d57a512793ab, empty load weight: 8,900 kg, maximum load weight: 15,100 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear splash guards across the entire width Quarter-shell mudguards in front of 1st axle Widenings extendable to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed outer frame width 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 1 pair of lashing eyes on offset per 5 tons 9 pairs of lashing rings at the top and sides, each 10 tons, embedded in the outer frame 2 x front on offset 7 x in the drop deck 6 pairs of lashing holes in the outer frame of the low bed, each with 5 to. (lashing strap attachment) Trailer drawbar Turntable Drawbar with tested 50 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical incl. axle load compensation front and rear Axle load compensation front and rear (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm 2 x 7-pin interchangeable plugs at the front, with connecting cable, floor Front offset with steel/ checker plate covering Then with 70 mm softwood floor, steel/checker plate covering in the wheel arch area Rear slope with 70 mm softwood flooring Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Hydraulic via tractor power take-off with throttle, actuation on the left side in FR Hydraulic connection with SVK plug NW 10/3, incl. connection hose Operating instructions With 10,000 kg axle load, a special permit is required, only indivisible load possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Pjdpfx Ahji Ri Izjyspr Country of registration: Germany With Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Incl. Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Paint finish Frame DB 7350 nova gray 10-year warranty against rusting through Drawbar Galvanized or black, manufacturer's choice Drive-on ramps Hot-dip galvanized

Condition: new, machine/vehicle number: 628cde0fe99cc2d3c8eaa8dd8, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguard 1st axle with anti-spray flapsAnti-spray flaps behind 2nd and 3rd axle 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Extensions extendable to 3,000 mm Storage compartment for wooden planks in the middle of the loading area Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes (40 lashing options) 1 pair of lashing cut-outs in the front side member on offset, 10 tons each 4 pairs of lashing holes in the outer frame, 5 tons each (lashing strap attachment) 7 pairs of lashing points at the top and sides of the outer frame, 10 tons each 1 x front on offset 6 x in the drop deck First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) 2 additional pairs of hinged lashing eyes, 10 tons each 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension Drum brake axles, at the manufacturer's choice Axle/chassis laser-measured Reduction of tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's discretion Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Make: Wabco or Knorr Electrical system Ppedpfx Aji Ri Ddehyjr 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front offset with steel/ checker plate covering Storage box recessed into the drive-over slope to the offset Then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6,500 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Country of registration / plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Warning sign according to ECE - 70 Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Drawbar Galvanized or black, at the manufacturer's discretion Drive-on ramps Hot-dip galvanized Attention! These are archive pictures!

Condition: used, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 04/2023, next inspection (TÜV): 05/2026, Year of construction: 2023, Equipment: ABS, * Fliegl SDS 470 low-loader * First registration: 04-2023 * Hydraulic lifting bed * 9-ton winch with remote control * Hydraulic double ramps * Last axle is force-steered * SAF axles * Curb weight: 11,800 kg * Gross weight: 41,000 kg * More pictures and videos via Whatsapp Psdjyq A Uqepfx Ahyepr * Information subject to change and prior sale.

Condition: new, empty load weight: 5,740 kg, maximum load weight: 24,260 kg, overall weight: 30,000 kg, axle configuration: 3 axles, color: silver, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, rotating beacon, 3 axles, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), extendable to 3m width, lashing rings, 2-piece loading ramps, mechanical ramps, extendable drawbar, side aluminium underrun protection, twin tyres, EBS. Body: loading length approx. 8.5m, extendable to 3.05m. Demonstration vehicle! Parabolic suspension with axle compensation at the rear, 3 x 10t SAF axles, permissible gross weight up to 30t possible, drawbar adjustable in length. New vehicle from stock with day registration to the manufacturer! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Ppjdpfexbttqjx Ahysr

Condition: excellent (used), Year of construction: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: - 230 V - 0,7A - 50 Hz - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Pedpfx Aolatz Dohyepr Belt width: 390 mm Belt length: 2000 mm

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: -230 V -0,7 A -50 Hz Pjdjk Eakvopfx Ahyepr -IP 65

Condition: good (used), Year of construction: 2014, functionality: fully functional, power: 22 kW (29.91 HP), planing width: 400 mm, overall weight: 1,800 kg, Calibrating Milling Machine / Planer for Parquet Manufacturer: Ledinek Model: Rotoles 400 D-S Year of manufacture: 2014 This machine comes from a parquet production facility. Working width: 400 mm Working height: 2 - 150 mm Minimum workpiece length: approx. 150 mm Thickness rotor power: 22 kW Motor speed: 2940 rpm Feed continuously variable: approx. 10 - 45 m/min., motor approx. 3 kW Number of reversible blades: 48 pcs Maximum chip removal: approx. 8 mm Total connected load: approx. 26 kW Pedpfx Ahoy H Uptjyepr Electrical voltage: 3x 400 V, 50 Hz Compressed air: 6 bar Dimensions: approx. 2000 x 1300 x 2000 mm (LxWxH) Weight: approx. 1800 kg

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Podpey Hi Iwjfx Ahyjpr Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: ready for operation (used), Year of construction: 2014, operating hours: 20,652 h, total height: 2,380 mm, total width: 1,200 mm, overall weight: 13,000 kg, product length (max.): 6,800 mm, Complete cut-off grinding system manufactured in 2014. This HARALD BAUGMARTEN TM 400 S features a press force of 3500 kN and a cutting speed of approximately 30 mm/s at 500 kN. It includes a robust hydraulic system with a total drive power of 30 kW and a machine weight of around 13,000 kg. If you are looking to get high-quality cutting capabilities, consider the HARALD BAUGMARTEN TM 400 S complete cut-off grinding system we have for sale. Contact us for further details. • Press (holding) • Force: 3500 kN • Stroke: 50 mm • Speed at 500 kN: approx. 30 mm/s • Speed at 3500 kN: approx. 4 mm/s • Return speed: 60 mm/s • Press (cutting) • Force: 2500 kN • Stroke: 100 mm • Speed at 500 kN: approx. 30 mm/s • Speed at 2500 kN: approx. 5 mm/s • Shock damping stroke: 20 mm • Drive and power • Hydraulic pump power: 2 × 15 kW • Total hydraulic drive power: 30 kW • Cooling unit power: 3 kW • Hydraulic unit power: 3 kW • Pipe connections (machine to hydraulic unit) • 2 × Ø38 × 4 mm • 2 × Ø30 × 4 mm • 1 × Ø20 × 3 mm • Mechanical adjustment tolerance: ±5 mm • Operating hours • Hydraulic unit 1: 20,652.8 h • Hydraulic unit 2: 20,641.8 h • Main system components (core machine) • Cut-off grinding machine type TM 400 S (manufacturer: Sema Systemtechnik) • Four-column press (manufacturer: Winter Pressen) • Hydraulic power unit with hydraulic pumps • Control cabinet and operator panel Additional equipment • Automatic bar feeder with bundle loader Pjdpfx Ahsyzp Iaoyopr • Bar breaking device • Bar rotary drive / measuring station • Weighing station with section sorting • Extraction and filter system • Soundproof booth (HüWa Schallschutz und Anlagenbau) and protective fencing

Condition: excellent (used), Separator Lima 400 S Year of manufacture: 2008 Ppjdpfxey A H U Te Ahyer

Condition: used, mileage: 88,770 km, power: 387 kW (526.17 HP), first registration: 04/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2027, brakes: retarder, color: blue, gearing type: automatic, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, IVECO S-WAY long-haul tractor unit with the following equipment: long-distance driver cab with 2 bunks, ZF intarder, automatic climate control, original IVECO stationary air conditioning, auxiliary heater, electric glass sunroof, exterior sun visor, luxury air-suspended driver seat with heating and cooling, comfort air-suspended passenger seat, dual electric window lifts, electrically adjustable and heated exterior mirrors, roof and side spoilers, ABS, disc brakes with EBS, adaptive cruise control with collision warning and emergency braking function, lane departure warning system, traction control, ESP, central lubrication, 12-speed gearbox type 12 TX 2420 TD, PTO with dual-circuit walking floor hydraulic system, 135 l AdBlue tank, 710 + 290 l aluminum tanks, digital tachograph, full LED headlights with cornering and turning light, LED tail lights, work lights, battery master switch, onboard computer, IVECO Connect fleet management with navigation system, multifunction leather steering wheel, central locking with remote control, fridge on driver’s side, cooler box on passenger’s side, reversing warning system, two exterior storage compartments each on left and right, axle load indicator for rear axle, air suspension on rear axle, rear axle differential lock, wheelbase 3800 mm, permitted gross combination weight 44,000 kg, 1st owner, well-maintained with full service history, like-new condition, original mileage (verifiable), not a rental vehicle, Euro 6E engine, low noise, German vehicle with German registration papers, not a lowliner and not a mega tractor unit! Sale to commercial customers only! All information without guarantee! Subject to errors and prior sale! Ppedpfxsy Aqndo Ahysr

Condition: used, mileage: 613,000 km, power: 368 kW (500.34 HP), first registration: 03/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, SCANIA S 500 ? RETARDER ? TIPPER HYDRAULICS / WALKING FLOOR HYDRAULICS ? ALCOA ? 2 X DIESEL TANKS ? PARKING AIR CONDITIONING ? FULL FAIRINGS ? ACC ? ----VEHICLE HISTORY ? VIDEO AVAILABLE ON REQUEST ? GERMAN VEHICLE ? ONE OWNER VEHICLE EQUIPMENT Ppodpeyzvz Tsfx Ahysr ? AUTOMATIC TRANSMISSION ? RETARDER ? CRUISE CONTROL ? ADAPTIVE CRUISE CONTROL (ACC) ? LANE KEEP ASSIST ? ACTIVE BRAKE SYSTEM ? ALCOA ALUMINIUM RIMS ? HILL START ASSIST ? STATIONARY AIR CONDITIONING UNIT ? PARKING HEATER ? REVERSING CAMERA ? NAVIGATION SYSTEM ? ON-BOARD COMPUTER ? LEATHER SEATS ? LEATHER INTERIOR ? COMFORT SEATS ? SEAT HEATING ? SEAT VENTILATION ? MULTIFUNCTION STEERING WHEEL ? RADIO UNIT ? FRIDGE (1X) ? ADDITIONAL SHELVES ? DIFFERENTIAL LOCK ? POWER TAKE-OFF (PTO) ? TIPPER HYDRAULICS ? WALKING FLOOR HYDRAULICS ? FULL AIR SUSPENSION ? FULL FAIRINGS ? 2X DIESEL TANKS + 1X HYDRAULIC TANK ? ADDITIONAL LIGHTING FURTHER INFORMATION ? MILEAGE: 613,000 KM ? WHEELBASE: 3.85 M ? FRONT TYRE SIZE: 385/65 R22.5 ? REAR TYRE SIZE: 315/70 R22.5 ? WELL MAINTAINED VEHICLE CONDITION ? VEHICLE AVAILABLE IMMEDIATELY ? VEHICLE READY FOR IMMEDIATE USE ----EXPORT / NOTICE EXPORT SALES ONLY WITH DEPOSIT (MINIMUM €500 ? €2,000) FOR SALES TO EU & NON-EU COUNTRIES, A MINIMUM DEPOSIT OF €500.00 / €1,000.00 IS REQUIRED. EXPORT REGISTRATION EXW POSSIBLE WITHIN 10 MINUTES (AUTHORISED EXPORTER). 5 DAY, 15 DAY, 30 DAY PLATES AND 15 DAY AUSTRIAN PLATES AVAILABLE. VEHICLE RESERVATIONS ONLY VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. SUBJECT TO CHANGE, ERRORS, AND PRIOR SALE.

Condition: good (used), HAUSER S 35-400 is a CNC jig grinder for precision, high accuracy and reliability. Capacities: table 600×380 mm, X500 Y300, vertical slide 450 mm, spindle‑to‑table 485 mm, max grinding Ø 230 mm (360 with plate), spindle nose stroke 340 mm, taper up to 16°. Specs: spindle vertical travel 1–110 mm stepless, travel speeds 1–12 m/min, planetary C 5–250 t/min, 3×380 V 50 Hz, total power 10 CV, weight ≈4000 kg, footprint 2700×1700×2850 mm. Accessories: coolant, paper filtration, lamp, MSS, oil‑mist extractor, CBN redresser HF, toolchanger 12 EROWA. Suited for tight tolerances in automotive, watchmaking, toolmaking, aerospace and medical sectors. Ppodpfxoyxn Nds Ahysr

Condition: excellent (used), Year of construction: 2005, turning length: 1,585 mm, turning diameter: 760 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, bar passage: 80 mm, Max. turning Ø: 760mm X-axis: 630mm Y-axis: 230mm Z-Axis: 1585mm B Axis: 225° Spindle bore: 80mm Speed range: 6000Rpm B-Axis Speedranges:12000Rpm B-Axis power: 19kW Length: 7000mm Width: 2700mm Ppedpfx Aevgcpvohyjr Height: 2800mm Weight: 14500kg

Condition: used, mileage: 551,161 km, power: 353 kW (479.95 HP), first registration: 07/2020, fuel type: diesel, overall weight: 20,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, According to our 'General Terms and Stated Conditions of Sale', and without any guarantee or warranty, we can offer you, subject to prior sale, errors, or typographical mistakes, the following vehicle on a non-binding basis until conclusion of contract: Iveco S480 S-Way with Dual-Circuit Hydraulics (Vehicle 401) First registration: 27.02.2020 Mileage: 551,161 km Operating hours: 8,723 h Power: 353 kW / 480 HP Engine: 11,120 cc Next safety inspection: 08/2026, TÜV valid until 02/2026 Psdsyy Exrspfx Ahyjpr Engine: Euro 6, D, M, N Overall length: 6,250 mm, width: 2,550 mm, height: 3,970 mm Roof spoiler, side deflectors, sun visor 4 × roof-mounted spotlights Adaptive cruise control with emergency brake assist, lane departure warning system LED daytime running lights Additional headlights Dual-circuit hydraulics for tipper and moving floor 1 × yellow work light in the middle rear of the cab, plus 2 × LED work lights on both sides behind the fenders 750 L fuel tank (driver’s side) 2 × wheel chocks ALCOA aluminum rims Tyres 315/70R22.5 1st axle: approx. 40/40%, 2nd axle: approx. 40/40 Central locking with remote control Long-distance cab with 2 beds Heated seats (driver and passenger) 2 × electric windows, mirrors, mirror heating, electric roof Multifunction steering wheel with retarder Automatic climate control, auxiliary heating, integrated parking air conditioning Large screen with navigation 2 × refrigerators USB port Price: €25,500.00 (net) All information provided without any guarantee or warranty. Our 'General Terms and Stated Conditions of Sale' apply. Place of jurisdiction up to a disputed amount of €50,000 is the district court Ludwigslust; for higher disputed amounts, the regional court Schwerin. Subject to errors, typing mistakes, and prior sale.

Year of construction: 2024, condition: new, AD-S 40400 ABKANTPRESSEBending force / Bending force ton400Bending length / Bending length mm :4050Distance between columns :3400Y rapid speed / Express speed mm / sec: 100Y working speed / Working speed mm / sec: 8Y return speed / Return speed mm / sec: 80Crowning / Crowning -: Mot.Daylight / Installation height tool passage and penetration depth of your press brake mm: 630Table width / Table width mm: 300Table height / Table height mm: 1040Stroke / Stroke mm: 365Throat depth / Projection mm: 510Support arms / Support arms: 2 piecesBack gauge finger blocks / The backgauge is standard with two finger blocks amount: 2 piecesSpeed of travel in X-axis / Pressing force and speed of your press brake. X - Axle size / sec: 350Travel in X-axis / x-axis Travel directionmm: 750Speed of R-axis(max.) Speed R axis max. mm / sec: 300Travel in R-axis / R axis Travel directionmm: 250Motor power / Motor power kW: 37Oiltank capacity / Oil tank capacity lt: 450Length / Length mm: 5750Width / Widthmm: 2110Height / Heightmm: 3540Weight approx. / Weight approx.kg: 27760X=650mm X,R,Z1,Z2, /AL)CE with manual F. Akas ll M-FPSC-B-C (SAFTY PLC)Upper tool DurmaLower tool DurmaCentral control motor Price plus transport and commissioningWe look forward to hearing from you. Podpfx Ahod Rlk Hoyspr

Condition: used, Year of construction: 1995, material width 400 mm coil weight 2,0 t Ppjdpfxevuungs Ahyor coil internal dia. 480 - 520 mm coil outside dia. 1500 mm with hydraulic auxiliary drive with mechanical lag brake, hydraulic centralized expansion, pneumatic snubber roll, coil loop control via contact plate min. material width 20 mm

Condition: excellent (used), Year of construction: 2008, Wittmann-Battenfeld HC 400/2250 S Year of construction 2008 Unilog B6 control system Operating hours: approx. / (pump) Ppedsyxiawspfx Ahyor Screw diameter 65 mm Fuel weight: approx. 980gr/hp Distance between tie bars 900 x 710mm Extras: Core pull Handling interface Battery incl. Battenfeld Handling R10 Machine weight: 20.000kg Machine is free! Subject to alterations, prior sale and errors excepted!

Condition: good (used), Year of construction: 2024, Year of manufacture: 2024 3D AOI inspection system with intelligent DLP projection 1 x AOI database structure Web Apache server 1 x teaching station (offline programming) 1 x verification station (verification or repair station) 1 x Q-up (analysis station) Ppjdpfx Aheyw Nxwsyor 1 x administrative interface for AOI management PCB thickness: 0.4-4 mm PCB weight: up to 4 kg PCB warp: +/- 10 mm Compressed air: 0.3x0.6 Mpyi, 10 l/min Lighting: RGB color high-light method 2D camera and 3D measurement Resolution: telecentric lens with 15µ + 4 side cameras with 10µ each Height measurement up to 25 mm PCB size: 50x50 – 510x460 mm Component clearance: top 40 mm, bottom 40 mm