Used Fliegl Dhka 390 - 40 M³ for sale (78,551)

Condition: new, machine/vehicle number: 11be0b1246b37a0869e99ab60, empty load weight: 5,100 kg, maximum load weight: 33,900 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space height: 1,750 mm, loading space volume: 40 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,340 mm, suspension: air, tire size: 385/65 R 22,5, Further Information Chassis Semi-Trailer Tipper Fine-grain steel welded construction in basic lightweight design, fifth wheel plate with interchangeable 2" kingpin Curved front end, patented 24 t two-speed landing gear, single-sided operation, with straight lower section, without compensating ram 2 wheel chocks with holders Foldable underrun protection Half-shell mudguards Integrated mudguard holders with stone-repellent surface Splash guards with anti-spray only on the last axle 1 tarpaulin bar with bracket 2 tow hooks at the rear Axles & Suspension SAF disc braked axles with 430 mm disc diameter Axles/chassis laser-measured to reduce tire wear and fuel consumption Offroad version axles Air suspension 1st axle: automatic lift axle, including forced lowering and traction aid, activation via 3x braking (traction aid functional up to an axle load exceedance of 30% and a max speed of 25 km/h) Hot-dip galvanized lift axle mechanism with 10 years warranty against corrosion Braking System 2-line compressed air braking system, color-coded lines for easy servicing. Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Wheels and Tires 385/65 R22.5 tires, manufacturer at the supplier’s choice Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via in-cab display via EBS, truck not installed (requirement must be met by the truck. Only for base tires). Electrical System 24 Volt, multi-chamber lights, yellow LED side lighting Yellow LED side indicators linked with turn signals "flashing side lights" 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulic via truck PTO Body Aluminum box body made from high-quality, wear-resistant material; 5 mm thick bulkhead with external end walls made from 30 mm hollow profiles, neatly welded with aggregate-repelling upper rail profile. Interior with ladder at bulkhead (not available with Cramaro). Shovel and broom holders outside at the bulkhead. Greenline - conical and aerodynamic body shape Membrane rear wall Swing tailgate with double hinge, external, with 2-point hook locking. Cgedpfoi Rixyox Aireu Tailgate with rubber seal. Note! Heat resistant up to max. 170°C! Continuous 6 mm thick floor Step platform with ladder, connecting plate for air/electric/breaking with ample space for optimal operability. Roll tarp stored on right-hand side for FR, with central locking on left-hand side for FR Country of Registration / License Plates Germany Certificate of approval according to EC 2007/46 24/7 service hotline Prepared for single-line number plate holder Conspicuity marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Nova grey "10 year anti-corrosion warranty" Landing gear: Black coated Body: Natural aluminium Roll tarp: RAL 7035 light grey

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 2,150 mm, loading space volume: 38 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,740 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, semi-trailer tipper Fine-grained steel welded construction, lightweight design, kingpin plate with 2 interchangeable kingpins Curved front end, patented Telescopic support in the center, uncoupling not possible when loaded, when uncoupled, the vehicle must lean backwards. 2 support wedges with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface repels stones With anti-splash flaps only on the last axle 1 tarpaulin rod with holder 2 towing hooks at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting aid, activated 3 times by the brakes Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system Cedpfx Aoi Riz Reirsgu 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front EBS, electronic braking system with EBS socket at the front With lifting and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck PTO Tippers Aluminum box tipper made of high-quality, abrasion-resistant material, front wall 5 mm thick, with external side walls made of 30 mm hollow chamber profiles, neatly welded, with sloping top edge profile to prevent spillage. Interior with access ladder on the front wall (not in conjunction with Cramaro). Shovel and broom holder on the outside of the front wall. Greenline - conical and aerodynamic tipper body shape Membrane - rear wall Rear wall as a hinged flap with double-joint hinge, externally supported with a 2-fold hook lock. Rear wall with rubber seal. Note! Heat resistant up to max. 170°C! Floor, continuously 6 mm thick Standing platform with access ladder, connection plate for air/electric and brake, with ample space for optimal operation. Rolltarp, one-sided for storage on the right-hand side, with central locking on the left-hand side Painting Frame DB 7350 Novagrau 10 years Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031191, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2024, loading space length: 9,300 mm, loading space width: 2,420 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, tire size: 385/65 R22,5", color: grey, The images shown are archive photos. The vehicle may still be in use! Chassis: Semi-trailer tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2'' kingpin Patented curved front panel 24-ton 2-speed landing gear, single-side operation, with straight base, with lateral compensation 2x wheel chocks with holders Side underrun protection: aluminium Rear underrun protection, foldable 6x half-shell mudguards Integrated "mudguard holder" with stone-repellent surface 2x with anti-spray flaps (only on the last axle) Axles & Suspension 3x SAF disc brake axles Axles in off-road specification "Axles/chassis laser aligned" – reduces tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and traction aid, activated by "braking 3x". (Traction aid functional up to 30% axle overload and up to a max speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" – 10-year warranty against corrosion Braking System 2-line compressed air braking system Coloured line routing for easy servicing Spring-actuated parking brake 2 fail-safe coupling heads at the front, without connecting line EBS by Haldex, electronic braking system with EBS socket at the front (without connection cable) Note: The trailer may only be towed by towing vehicles that ensure proper ABS function! With raise & lower valve Vehicle stability system Wheels and Tires 6x 385/65 R22.5", manufacturer’s choice 6x steel rims, manufacturer’s choice Electrics 24 volt, multi-chamber lights, side-mounted yellow LED lighting 2 white front position lights 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed part, nominal width 48 mm. (without hose connection) Actuation hydraulically via truck PTO Body / Tip Body Cjdpfxey Rl Une Airegu Aluminium box body, high-quality abrasion-resistant material Sloped front wall, 5 mm thick, with external cylinder mount Side walls made of 30-mm hollow-chamber profiles, cleanly welded, with bulk material-repellent top rail profile. Internal access on front wall (not in combination with Cramaro). Shovel and broom holder on outside of front wall Greenline – conical, aerodynamic box shape "Membrane" tailgate Tailgate: pendulum door with double-joint hinge, externally mounted, double hook lock Tailgate with rubber seal Note: Heat-resistant up to 170°C max! Floor: continuous 5 mm, Brinell 110 Note: Only suitable for transporting sand, chippings and gravel, max grain up to 20 mm! All other goods excluded from warranty! Operating Notes For transport of salt, lime, etc., we recommend a tipping cylinder with hard chrome-plated piston rod to avoid corrosion and pitting. The stated gross weight is technically feasible; depending on load, the actual gross weight may not be achievable within the legal axle, support, and fifth-wheel loads. (Improper load distribution may impair driving and tracking behavior) Paint Finish Frame: DB 7350 Novagrey "10-year warranty against corrosion" Landing gear: black coated Body: natural aluminium Roller tarp: RAL 7035 light grey

Condition: new, machine/vehicle number: efdaf8862775f9506d97b86a5, empty load weight: 5,600 kg, maximum load weight: 33,400 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,740 mm, suspension: air, tire size: 385/65 R 22,5, Further information Chassis Semi-Tipper Fine-grained steel welded construction, in basic lightweight design, fifth wheel plate with interchangeable 2" kingpin Curved front panel, patented 24 t, 2-speed landing gear, single-sided operation, with straight base, without displacement compensation 2 wheel chocks with holders Underrun protection, foldable Half-shell mudguards Integrated mudguard holder, surface stone-repellent With anti-spray mud flaps only on the last axle 1 tarp rod with holder 2 towing hooks at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser alignment reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start-up aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air brake system, color-coded piping for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raise & lower valve Vehicle stability control system Wheels and tires 385/65 R22.5, brand at manufacturer's discretion Steel rims, factory silver "TPMS" Tire pressure monitoring system according to ECE R 141, display via the towing vehicle, through EBS, no truck installation (requirement must be present in the truck, only on primary tires) Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to the indicator, "flashing side marker lights" 2 white position lights at front 2 white/red lane guidance lights at rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Body Aluminum box body made of high-quality, wear-resistant material, headboard 5 mm thick, with external side walls made of 30 mm hollow-chamber profiles, cleanly welded, with bulk material-repellent upper beam profile. Internal step at headboard (not in combination with Cramaro). Shovel and broom holder on the outside of the headboard. Greenline – conical and aerodynamic body design Membrane – tailgate Tailgate pendulum mounted with double hinge and two-wing door split 1/2 to 1/2, top with swing bracket, with one grain chute per door. Tailgate with rubber seal Note! Heat resistant up to max. 170°C! Cgedpei Ri Ihsfx Airju Floor continuously 6 mm thick Standing platform with access, connection plate for air/electric and brake, with generous clearance for best possible operability. Roll tarp stows to right side (when viewed from rear), with central locking to the left (from rear) Country of registration/Plates Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, side white and rear red Paintwork Frame: DB 7350 Novagrau "10-year warranty against rust-through" Body: natural aluminum Roll tarp: RAL 7035 light grey

Condition: new, machine/vehicle number: abc6276e1749f9dddc494eb32, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22,5², Further information Chassis tipper semi-trailer Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end Patented Telescopic support in the middle, unhitching with load not possible, when unhitched the vehicle must be at an angle to the rear. 2 wheel chocks with holder Folding underride guard Half-shell mudguards Integrated mudguard holder Stone-repellent surface with anti-spray flaps on last axle only 1 tarpaulin pole with bracket 2 towing hooks at the rear Axles+suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axles in off-road version, Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism 10-year warranty against rusting through Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable front clutch heads, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Automatic tilt lowering with shut-off valve Wheels and tires 385/65 R22.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chlorinated, with HDK screw socket, fixed part, NW 48 mm (without hose connection). Hydraulic actuation via truck power take-off Troughs Aluminum box body made of high-quality, abrasion-resistant 5 mm thick front wall, with external walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent top rail profile. Inside with access to front wall (not in conjunction with Cramaro). Shovel and brush holder on the outside of the front wall. Greenline - conical and aerodynamic trough shape Membrane rear wall Rear wall as swing flap with double-jointed hinge, resting on the outside with double hook lock. Rear panel with rubber sealNote! Heat-resistant up to max. 170°C! Floor 6 mm thick throughout Cgjdpfxoi Ri H Ie Aireu Standing platform with access, connection plate for air/electric and brake with large clearance for best possible operability. Roller tarpaulin on one side for depositing in FR-right, with central locking in FR-left Operating instructions For salt, lime, etc. We recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not attacked by the material and rusts. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Germany Test approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red on the rear

Condition: new, machine/vehicle number: 074630ca1b8dc2d710f82c15a, empty load weight: 3,980 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis tipper semi-trailer Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end Patented Without support leg Wheel chocks with holder Underride guard, foldable Half-shell mudguards Integrated mudguard holder Stone-repellent surface Tow hook at the rear Axles+suspension SAF disc brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism 10-year warranty against rusting through Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable front clutch heads, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 385/65 R22.5 tires of the manufacturer's choice Polished aluminum rims, manufacturer's choice Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin socket at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chlorinated, with HDK screw socket, fixed part, NW 48 mm (without hose connection). Hydraulic actuation via truck power take-off Troughs Aluminum box body made of high-quality, abrasion-resistant 5 mm thick front wall, with external walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent top rail profile. Inside with access to front wall (not in conjunction with Cramaro). Cgedpfei Ri H Sex Airju Shovel and brush holder on the outside of the front wall. Greenline - conical and aerodynamic trough shape Membrane rear wall Rear wall as swing flap with double-jointed hinge, resting on the outside with double hook lock. Rear panel with rubber sealNote! Heat-resistant up to max. 170°C! Floor 5 mm thick throughout, Brinell 110Note! Only for transporting sand, grit and rolled gravel with a maximum grain size of up to 20 mm! All other transport goods are excluded from the warranty! Standing platform with step, connection plate for air/electric and brake with large clearance for best possible operability. Roller tarpaulin on one side for depositing in FR-right, with central locking in FR-left Operating instructions For salt, lime, etc. We recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not attacked by the material and rusts. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and castering behavior possible due to incorrect load distribution) Revolution Link: Revolution Link experience report: Country of registration / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray Body R

Condition: new, machine/vehicle number: 45d76d32267904923b7adcdea, empty load weight: 4,980 kg, maximum load weight: 30,020 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis tipper semi-trailer Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end Patented 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Wheel chocks with holder Underride guard, folding Half-shell mudguards Integrated mudguard holder Surface stone-repellent Tow hook at the rear Axles+suspension SAF disc brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism 10-year warranty against rusting through Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable front clutch heads, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 385/65 R22.5 tires of the manufacturer's choice Polished aluminum rims, manufacturer's choice Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights Cedpfx Aei Ri Ideirsgu 2 x 7-pin socket at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chlorinated, with HDK screw socket, fixed part, NW 48 mm (without hose connection). Hydraulic actuation via truck power take-off Troughs Aluminum box body made of high-quality, abrasion-resistant 5 mm thick front wall, with external walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent top rail profile. Inside with access to front wall (not in conjunction with Cramaro). Shovel and brush holder on the outside of the front wall. Greenline - conical and aerodynamic trough shape Membrane rear wall Rear wall as swing flap with double-jointed hinge, resting on the outside with double hook lock. Rear panel with rubber sealNote! Heat-resistant up to max. 170°C! Floor 5 mm thick throughout, Brinell 110Note! Only for transporting sand, grit and rolled gravel with a maximum grain size of up to 20 mm! All other transport goods are excluded from the warranty! Standing platform with step, connection plate for air/electric and brake with large clearance for best possible operability. Roller tarpaulin on one side for depositing in FR-right, with central locking in FR-left Operating instructions For salt, lime, etc. We recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not attacked by the material and rusts. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and castering behavior possible due to incorrect load distribution) Revolution Link: Revolution Link experience report: Country of registration / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 0

Condition: new, machine/vehicle number: 357314e4e176f8758d11ba42b, empty load weight: 4,500 kg, maximum load weight: 30,500 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis tipper semi-trailer Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end Patented Telescopic support in the middle, unhitching with load not possible, when unhitched the vehicle must be at an angle to the rear. 2 wheel chocks with holder Folding underride guard Half-shell mudguards Integrated mudguard holder Stone-repellent surface with anti-spray flaps on last axle only 1 tarpaulin pole with bracket 2 towing hooks at the rear Axles+suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axles in off-road version, Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism 10-year warranty against rusting through Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable front clutch heads, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Automatic tilt lowering with shut-off valve Wheels and tires 385/65 R22.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chlorinated, with HDK screw socket, fixed part, NW 48 mm (without hose connection). Hydraulic actuation via truck power take-off Troughs Aluminum box body made of high-quality, abrasion-resistant 5 mm thick front wall, with external walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent top rail profile. Inside with access to front wall (not in conjunction with Cramaro). Shovel and brush holder on the outside of the front wall. Greenline - conical and aerodynamic trough shape Membrane rear wall Rear wall as swing flap with double-jointed hinge, resting on the outside with double hook lock. Rear panel with rubber sealNote! Heat-resistant up to max. 170°C! Floor 6 mm thick throughout Standing platform with access, connection plate for air/electric and brake with large clearance for best possible operability. Roller tarpaulin on one side for depositing in FR-right, with central locking in FR-left Operating instructions For salt, lime, etc. We recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not attacked by the material and rusts. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Germany Test approval according to EC 2007/46 24/7 service hotline Cedpfx Aioi Ri R Isrjgu Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red on the rear

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031174, empty load weight: 5,835 kg, maximum load weight: 29,165 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2023, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,740 mm, suspension: air, tire size: 385/65 R22,5", color: grey, The images shown are archive photos. The vehicle may still be in use. Chassis Tipping Semi-Trailer Fine-grained steel welded construction in Basic lightweight design, fifth wheel plate with replaceable 2" king pin Curved front wall (patented) 24 t 2-speed support legs, single-sided operation, with straight base, without compensating rod 2x wheel chocks with holder Aluminium side underrun protection Rear under-run protection, foldable 6x half-shell mudguards Integrated mudguard holders with stone-repellent surface Tarpaulin rod with bracket 2x rear towing hooks Axles & Suspension BPW disc brake axles "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension 1st axle with automatic lift, including forced lowering and starting aid, operated by '3x brake' application Braking System 2-line compressed air braking system Colour-coded routing for easy servicing Spring-type parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS (Electronic Braking System) with EBS socket at the front, without connection cable Note: This trailer must only be towed by tractor vehicles that ensure ABS functionality! With lift & lower valve Cgedoy Efcuopfx Airou Vehicle stability control system Wheels and Tyres 6x 385/65 R22.5" tyres 6x steel rims Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white marker lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Tipping Body Aluminium box body made of high-quality, abrasion-resistant material Sloped 5 mm thick front wall with external cylinder mounting Side walls made of 30 mm hollow chamber profiles, clean welded, with bulk material deflecting top rail. Internal ladder at the front wall Shovel and broom holders outside front wall Rear wall with pendulum mounting and 'double-joint' hinges, with 2-winged door split 1/2 to 1/2, upper swing beam, with one grain slide per door Rear wall with rubber seal 6 mm continuous floor Standing platform with access, connecting plate for air/electric/brake Roll tarp can be stowed one side (FR-right), with central locking (FR-left) Operating Notes For transporting salt, lime, etc., we recommend a tipping cylinder with a hard chrome-plated piston rod to prevent corrosion and damage from the material. The total weight stated is technically possible; depending on the cargo, the full weight may not be achievable within the permissible axle/support/saddle loads (incorrect load distribution may result in poor handling and tracking). Note! Not suitable for chemically aggressive substances (e.g., acids, chlorine compounds, sulphur compounds, alternative fuels); such substances can cause stress corrosion cracking and extreme cracking in the body when combined with moisture on the body surface! Vehicles with load bodies are intended for chemically non-aggressive cargo. Use for transporting aggressive goods such as acids, bases, salts, fertilizers, sewage sludge, and household waste is at the operator's own risk. This can result in damage such as stress corrosion cracking or pitting. Archive images are shown!

Condition: used, machine/vehicle number: WFDFLT33902030053, empty load weight: 5,835 kg, maximum load weight: 29,165 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, loading space volume: 50 m³, total length: 11,200 mm, total width: 2,550 mm, total height: 3,540 mm, suspension: air, tire size: 385/65 R22,5", color: grey, The images shown are archive photos. The vehicle may still be in use. Chassis - Tipper Semi-Trailer Fine-grained steel welded construction, in basic lightweight design, fifth wheel plate with replaceable 2" king pin Patent-protected curved front end 24 t 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation Foldable underrun protection Axles & Suspension 3x BPW disc brake axles with 430 mm disc diameter "Axles/chassis laser measured" - reduces tire wear and fuel consumption Air suspension 1st axle with automatic lift function, including forced lowering and traction assistance, activated by "brake 3 times" (traction assist is operational up to a 30% axle load exceedance and a maximum speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" Braking System 2-line compressed air braking system Spring actuated parking brake 2 front interchangeable coupling heads, without connecting hose EBS - Electronic Braking System with EBS socket at front, without connection cable Attention: This trailer may only be towed by tractor units that ensure full ABS functionality! With lift & lower valve Vehicle - Driving Stability System Wheels and Tyres 6x 385/65 R22.5" tyres 6x steel rims Electrical System 24 Volt, multi-chamber lights, LED side marker lights (amber) 2 x 7-pin interchangeable sockets at the front, without connection cable, electrics not fully functional. Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm. (without hose connection) Body Aluminum box body made of high-quality, wear-resistant material. Sloped bulkhead, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, precision-welded, with upper rail profile for protection against bulk cargo. Interior access on the front wall (not in combination with Cramaro cover). Shovel and broom holder on front wall exterior. Greenline - conical and aerodynamic body design "Membrane" tailgate Rear wall suspended with "double hinge" and split 1/2 to 1/2 two-wing door, swing arm on top, with one grain slide per door. Floor plate continuous, 6 mm thick Standing platform with access, connector plate for air/electricity and brakes, with spacious area for maximum operability. Roll tarp can be opened to the right (FR-right) and locked on the left (FR-left) with central locking. Cgjdpsy Edtfofx Airou Operational Notices For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent material corrosion and rusting. The stated gross weight is technically possible. Depending on the type of load, the gross weight may not be achievable within the permissible axle, support, and fifth wheel loads. Note! Not suitable for chemically aggressive materials (e.g. acids, chlorine compounds, sulfur compounds, "refuse-derived fuels"); such substances can cause stress corrosion cracking on damp body surfaces, potentially resulting in severe fracturing of the body structure. Vehicles with loading bodies are designed for non-chemically aggressive loads. Transporting aggressive substances such as acids, bases, salts, fertilizers, sewage sludge, and household waste is at your own risk. This may lead to stress cracks or pitting corrosion damage. The images shown are archive photos. The vehicle may still be in use.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,500 kg, maximum load weight: 29,500 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 9,830 mm, loading space width: 2,470 mm, loading space height: 1,750 mm, loading space volume: 41 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,340 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Further information Chassis, saddle, tipper Fine-grained steel welded structure, lightweight design, saddle plate with 2 interchangeable kingpins Curved front panel, patented 24 tons, 2-stage support winch, single-sided operation, with straight lower part, without stroke compensation 2 chock blocks with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to deflect stones with anti-splash flaps, only on the last axle 1 tarpaulin rod with bracket 2 towing hooks at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Axles in off-road design Air suspension 1st axle, automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 keyed coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lifting and lowering valve Cedpfx Aoi Ri Efjirsgu Vehicle - driving stability system Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole keyed sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Bodies Aluminum box body made of high-quality, abrasion-resistant material, front wall 5 mm thick, with external side walls made of 30 mm hollow profile, cleanly welded, with top profile designed to prevent spillage. Inside with ladder on the front wall (not in connection with Cramaro). Shovel and broom holder on the outside of the front wall. Greenline - conical and aerodynamic body shape Membrane - rear wall Rear wall pivotally mounted with double-joint hinge and with 2-wing door, division 1/2 to 1/2, with swivel gantry at the top, with one grain slide per door. Rear wall with rubber seal. Note! Heat resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with ladder, connecting plate for air/electricity and brake with large clearance for the best possible operability. Rollover tarp, single-sided for storage on the right, with central locking on the left.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031190, empty load weight: 4,900 kg, overall weight: 35,000 kg, axle configuration: > 3 axles, first registration: 08/2023, next inspection (TÜV): 03/2027, loading space length: 9,300 mm, loading space width: 9,300 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, tire size: 385/65 R22,5, color: grey, Year of construction: 2021, The images are archive photos. The vehicle may still be in use! Chassis Semi-Tipper Fine-grain steel welded construction, lightweight design, fifth wheel with replaceable 2" kingpin Curved front panel "Patented" 24 t, 2-speed landing gear, single-sided operation, with straight lower part, without sliding compensation 2x wheel chocks with holder Side underrun protection made of aluminum Underride guard, foldable 6x half-shell mudguards Integrated "mudguard holder" surface repels stones 2x anti-spray mud flaps on the last axle only 2x tow hooks at rear Axles & Suspension SAF disc brake axles Axles in off-road design "Laser-measured axle/chassis" reduces tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and start aid, operated by "braking 3x" (start aid functions up to 30% axle overload and maximum speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" with 10 years’ warranty against corrosion Brake System 2-line compressed air brake system Color-coded tubing for easy servicing Spring-loaded parking brake 2 foolproof coupling heads at the front, without connection line EBS by Haldex, electronic braking system with EBS socket at the front, without connection cable Note: The trailer must only be towed by vehicles that guarantee ABS functionality! Including raise/lower valve Vehicle stability control system Wheels and Tyres 6x 385/65 R22.5" tyres, brand at manufacturer’s discretion 6x steel rims, brand at manufacturer’s discretion Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin foolproof sockets at the front, without connection cables Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Body (Tipper) Aluminum box-type body made of high-quality, wear-resistant material Inclined front wall 5 mm thick, with external cylinder mount Side walls made of 30 mm hollow chamber profiles, fully welded, with bulk-material-repelling top rail profile. Inside with access steps on front wall (not available with Cramaro configuration) Shovel and broom holder outside on front wall Greenline – conical and aerodynamic body shape "Membrane" tailgate Tailgate as swinging flap with "double joint hinge", externally mounted with dual hook locking mechanism Tailgate with rubber seal Floor throughout 5 mm thick, Brinell 110 Note: Only suitable for transporting sand, gravel, and pebbles with a maximum grain size of up to 20 mm! All other goods are excluded from warranty! Roll tarpaulin can be stowed on right-hand side, with central lock on left-hand side Cedpoy Rlvrefx Airsgu Operating Notes For transport of salt, lime, etc., we recommend a tipping cylinder with hard-chromed piston rod to prevent corrosion by materials The stated gross weight is technically possible; depending on the load, the gross weight may not be achievable within axle/support/saddle load limits. (Poor driving and trailing behavior may result from incorrect load distribution) Paint finish

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902035293, empty load weight: 5,663 kg, maximum load weight: 29,337 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2024, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22.5", color: blue, trailer brake: trailer braked, The images are archive photos // Multiple units available! // The vehicle is still incoming! Chassis Semi-tipper chassis Basic lightweight construction, fifth wheel plate with exchangeable 2" kingpin Patented “Curved” front wall Central telescopic landing leg, uncoupling under load not possible; when uncoupled, the vehicle must be inclined towards the rear 2 wheel chocks with holders Foldable underrun protection Underrun protection with spring assistance for easier use 6 half-shell mudguards Integrated mudguard bracket, stone-repellent surface Cedoyux H Djpfx Airsgu Splash guards behind the last axle, asphalt version, mounted on mudguard with hinge, top hook-in feature for shortened mudguard Tarpaulin rod with bracket 2 towing hooks at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser alignment for reduced tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, additionally electrically operated from truck, including forced lowering and starting aid, no truck installation required Hot-dip galvanized lift axle mechanism, 10-year corrosion warranty Braking System 2-line compressed air brake system Color-coded line routing for easier servicing Spring-loaded parking brake 2 mix-up-proof coupling heads at front, no connecting line 24V EBS, electronic braking system with EBS socket at front, no connection cable With raise/lower valve Vehicle stability control system Driver’s brake, electrically operated from truck, no truck installation required Automatic tipping lower with shut-off valve Trailer Info Module for displaying vehicle data Axle load detection via EBS CAN-bus signal Wheels and Tires 385/65 R22.5”, brand per manufacturer’s choice Polished aluminum rims Protective caps for wheel bolts Electrics 24V, multi-chamber lights, yellow LED side marker lights 2 white LED position lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin error-proof sockets at front, no connection cable LED work lights at both sides Additional integrated LED work lights at rear Hydraulics High-pressure cylinder rated up to 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm Operated hydraulically via truck PTO Body Steel round body in "Stone Master Design" made from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mounting. Interior ladder at front wall Shovel and broom holder external at front wall "Membrane" tailgate Tailgate as pendulum flap, mounted externally with dual hook locking. Two clamping screws with toggle closures at lower sides. Pendulum tailgate spacers—can be hooked into the clamping screws Central grain chute Fliegl S.T.E.P. – foldable front standing platform with folding access ladder, for left-side access Body in insulated version, Fliegl Asphalt Profi Thermo, sheet metal cladding "Flip Top sliding cover", automatic rear lock as folding bow. Cover is extended towards the front. Electric drive cover, with 7-pin socket (charging socket) at the front with no connecting cable, including loose tractor socket, operation on trailer and via remote control. 7-pin spiral connection cable to truck for sliding cover, truck must be equipped with a suitable socket.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902035294, empty load weight: 5,663 kg, maximum load weight: 29,337 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2024, loading space length: 7,200 mm, loading space width: 2,550 mm, loading space height: 3,310 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22.5, color: blue, Year of construction: 2024, The images are archive photos // Multiple units available! // The vehicle is still in transit! Chassis: Semi-trailer tipper Basic lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front panel Central telescopic support, uncoupling while loaded not possible Foldable underrun protection Half-shell mudguards Tarp bar with holder Tow hook at rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned 1st axle automatic lift axle, additionally electrically controllable from the truck, including forced lowering and starting aid, no installation on truck required Braking system 2-line compressed air brake system Spring-loaded parking brake 2 mistake-proof coupling heads at the front, without connecting line 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable Automatic tipping lowering with shut-off valve Trailer info module for displaying vehicle data such as axle loads (not a calibrated scale), mileage, and diagnostic/system messages. Axle load detection via EBS CAN bus signal Wheels and Tires 385/65 R22.5 Polished aluminum rims Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white LED position lights at front Cgodpfeyu Rllex Airou 2 white/red lane control lights at rear 2x 7-pin and 1x 15-pin mistake-proof sockets at the front Hydraulics High-pressure cylinder max. 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, without hose connection Body Steel round body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic cylinder mounts Interior with ladder on front wall Shovel and broom holder outside on the front wall Tailgate as a pendulum flap, externally mounted with double hook locking. 2 tension screws with toggle latches on the bottom sides. Spacer for pendulum tailgate, can be hooked into tension screws Side walls 4 mm throughout, floor 4/5 mm thick, wear- and weight-optimized construction Fliegl S.T.E.P. – pivoting front catwalk with retractable access ladder on the left side for lateral access, only in combination with "Flip Top sliding cover" Body in insulated version, Fliegl Asphalt Profi Thermo, insulated at front, sides, bottom, and rear with Fliegl Isotherm panel cover, "Flip Top sliding cover," automatic rear lock with folding bows. Cover deploys forward. Electrically operated cover, with 7-pin socket (charging socket at front without connecting cable, including loose tractor socket, no installation on truck, control on trailer and via radio remote control) 7-pin connecting cable to truck as spiral cable for sliding cover, socket must be available on the truck Operation Notes For transports of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent corrosion from aggressive materials. The stated gross weight is technically possible; depending on cargo, the gross weight may not be reached due to legal axle/support/fifth wheel load limits. Note: Not suitable for chemically aggressive media (e.g. acids, chlorine compounds, sulfur compounds, substitute fuels). Vehicles with loading bodies are intended for non-chemically aggressive loads. Paint finish Frame: DB 7350 Novagrau Support legs: galvanized Body: RAL 5002 ultramarine blue Roll tarp: RAL 5002 ultramarine blue

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33903000211, empty load weight: 7,707 kg, maximum load weight: 27,293 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2023, loading space length: 15,030 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 101 m³, total length: 15,350 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", color: silver, The images are archive photos; the vehicle may still be in use! Vehicle consists of: Chassis: Semi-trailer for freight forwarding Fine-grained steel welded construction in lightweight design up to the support legs, fifth wheel plate with replaceable 2" king pin 24 t, 2-speed landing gear, single-sided operation, with a straight bottom section Rear extension ladder Side door holders 2 wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mudflaps Foldable mudguard for the lighting assembly Quarter mudguards Rear impact protection Curtain pole with holder 1 plastic toolbox Axles & Suspension 3 BPW disc brake axles "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air brake system Color-coded line layout for easy service Spring-loaded parking brake Duomatic coupling EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability system AAC Basic, automatic lift axle acting on the rear axle as maneuvering aid, up to 20 km/h, manually switchable Axle load detection via EBS-CAN bus signal Wheels and tires 385/55 R22.5, make at manufacturer’s discretion Electrics 24 volts, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to the indicator, 'flashing side marker lights' 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable SB Hydraulics Hydraulic cylinder with sliding mechanism built into the floor. 2-circuit hydraulic system. Forward/reverse switching is electric via wired remote control. Hydraulic operation via truck PTO Hydraulic connection with hose at the front wall and HDK screw connection Recommended pump performance: Displacement: 110 l/min Pressure: 250 bar Minimum oil tank volume: 100 l Floor boards made of aluminum, 8 mm ribbed profile Codpfx Ajy Snmpeirsgu Aluminum box body from high-quality, wear-resistant material. Front and side walls made of aluminum hollow profiles, top all round welded with a wide special reinforcement profile from aluminum Sliding wall for improved unloading of cargo, with reinforced curtain flaps at the bottom. Rear wall made of aluminum hollow profiles, as two-leaf door, split 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 external locking bars, locked at the top and bottom. Rear wall with mechanical safety lock, operated at the rear on the left in the direction of travel. With swingable cross beam at the top. Standing platform with ladders on both sides 3 removable, swingable cross beams for tarpaulin support Roll tarp, can be stowed on one side, with 2 longitudinal tension straps, 3 side tensioning straps with ratchet Operating notices: Special permit required if overall train length exceeds 16,500 mm Country of registration / license plates: Germany With Dekra inspection and certificate (in accordance with §13 EC-FGV) Warning panel 'Long truck' Long truck overall assessment Driver instruction at the Triptis plant for up to 4 persons per truck combination Paintwork: Frame: DB 7350 Nova Grey Body: Natural aluminum Roll tarp: RAL 7035 light grey

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902037031, empty load weight: 4,795 kg, maximum load weight: 30,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2025, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,040 mm, suspension: air, tire size: 385/65 R22.5", color: grey, These images are archive images! The vehicle may still be in use! Fine-grain steel welded construction, in basic lightweight design, kingpin plate with replaceable 2" kingpin, Curved front end "Patented" 24-ton, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Support wedges with holder Underrun protection, foldable Half-shell fenders Integrated "fender holder," surface resistant to stone chipping with anti-splash flaps only on the last axle Tarpaulin rod with holder Towing hook at the rear (not on Revolution model) Axles + Suspension SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assistance, activated by "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) "Hot-dip galvanized lift axle mechanism" Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Cjdpfx Ajy Rrplsirjgu Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Automatic tilting lowering with shut-off valve "TPMS" tire pressure monitoring system - display on the tractor unit, via EBS, without truck installation (the truck must have the necessary prerequisites. Only on base tires). Wheels and tires 385/65 R22.5" Steel rims Electrical system 24 volts, multi-chamber lights in LED, yellow LED lighting on the sides, license plate lighting in LED (Note! with certain tractor units, false diagnoses may occur, although the function is given) Yellow LED lighting on the sides linked to the turn signal "flashing side lights" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, without connecting cable Additional LED work light, integrated and recessed at the rear, switched via reversing light Hydraulics Low-pressure cylinder max. 170 bar Operation hydraulically via truck auxiliary drive Bins Aluminum box body made of high-quality, abrasion-resistant material. Sloping front wall, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, cleanly welded, with top rail profile that prevents spillage. Inside with access ladder on the front wall (not in conjunction with Cramaro). Shovel and broom holder outside on the front wall. Greenline - conical and aerodynamic bin shape "Membrane" - rear wall Rear wall as a hinged flap with "double-hinge hinge," externally mounted with double hook lock. Rear wall with rubber seal Floor continuous, 6 mm thick Standing platform with access ladder, connecting plate for air/electrical and brake connections with large clearance for optimal operability. Roll tarp, can be folded to the right side, with central locking on the left side Operating instructions For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod, so that it is not attacked and rusted by the material.

Condition: new, machine/vehicle number: 7383bc2b7f580f0cb319b52f7, empty load weight: 5,400 kg, maximum load weight: 33,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 2,960 mm, suspension: air, tire size: 385/65 R 22.5, Further information Chassis: Semi-Trailer Tipper Fine-grained steel welded construction, lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front end, patented Telescopic support centrally mounted, uncoupling when loaded not possible; when uncoupled, the vehicle must be positioned tilted toward the rear. Wheel chocks with holder Foldable underrun protection Codpfx Aoi Rix Ioirjgu Half-shell mudguards Integrated mudguard holders with stone-repellent surface Splash guards behind the last axle, asphalt version, hinged to the mudguard, with hanging option at top of mudguard, mudguard shortened Tow hook at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment reduces tire wear and fuel consumption Axles in off-road version Air suspension 1st axle: automatic lift axle, including forced lowering and traction assistance Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty Brake System 2-line compressed air brake system, color-coded line routing for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Attention: The trailer may only be towed by tractors that ensure effective ABS function! With lift & lower valve Vehicle driving stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System compliant with ECE R 141, display via tractor head unit through EBS, not installed in truck (must be prepped in truck, only for basic tire set) Electrics 24 volt system, multi-chamber lights, yellow LED side lighting Yellow LED side lights linked to indicator – "flashing side marker lights" 2 white position lights at front 2 white/red lane marking lights at rear 2 x 7-pin fail-safe sockets at front, without connection cable Hydraulics High-pressure cylinder max. 250 bar, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Body Steel round body in Stone Master design made from highly wear-resistant HB 400/450 steel. Slanted front wall with external hydraulic components and access steps at the front wall. Membrane rear wall Rear wall as pendulum flap, externally mounted with double hook lock. 2 clamping bolts with T-locks on the lower sides. Side walls throughout 4 mm thick, floor 4/5 mm thick, wear- and weight-optimized design Body insulated design, Fliegl Asphalt Profi Thermo, insulated at front, side, bottom and rear with Fliegl Isotherm. Cover: BASIC, tarpaulin side cover Standing platform with access, connection plate for air/electric and brake with large space for optimal operation. Side roll tarp, stowed to the right side, central locking on left Approval/Country/License Plates Germany Type approval per EG 2007/46 Body strength per EN 12642 24/7 service hotline Manufacturer certificate for thermal vehicles as per RS 10 - 2013 Prepared for single-line license plate holder Warning panel per ECE 70 Paintwork Frame: DB 7350 novagrau (new gray) "10-year anti-corrosion warranty" Support legs: galvanized Body/Side tarp: RAL color as desired, single-color Roll tarp: RAL 7035 light gray Thermal insulation also available in BASICplus (sheet metal cover) and Premium (stainless steel cover)!

Condition: new, machine/vehicle number: 7d479432c7290a73a46ff6365, empty load weight: 5,000 kg, maximum load weight: 34,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 2,960 mm, suspension: air, tire size: 385/65 R 22.5, Further Information Chassis: Semi-trailer Tipper Fine-grain steel welded construction in basic lightweight design, fifth wheel plate with replaceable 2" kingpin Patent-protected curved front end Central telescopic landing leg, uncoupling while loaded not possible, when uncoupled vehicle must be parked at a backward angle Wheel chocks with holders Foldable underrun protection Half-shell fenders Integrated fender bracket with stone-repellent surface Tarp rod with bracket Tow hook at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis for reduced tire wear and lower fuel consumption Axles in off-road version Air suspension Cjdpfx Aisi Ri Dporegu 1st axle is a lift axle with automatic lowering function and traction aid Hot-dip galvanized lift axle mechanism – 10 years warranty against rust-through Braking System 2-line compressed air brake system, color-coded line routing for easy servicing Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at the front, no connecting cable included Note: The trailer may only be towed by tractor units that ensure ABS function! With lift & lower valve Vehicle stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System per ECE R 141, display via tractor unit and EBS, without truck installation (prerequisite must be met in the truck, applies to standard tires only) Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting Side yellow LED lighting linked with indicators (“flashing side marker lights”) 2 x 7-pin swap-proof sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (no hose connection) Operated hydraulically via truck PTO Body Steel round trough in Stone Master design made from highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic system and ladder on the front wall Greenline – conical and aerodynamic trough design Shovel and broom holder outside on the front wall Membrane tailgate Tailgate as swing door with double hinge, external mounting with double hook locking. 2 clamp screws with toggle fasteners at lower sides Side walls continuous 4 mm thick, floor 4/5 mm thick, wear- and weight-optimized structure Standing platform with ladder, connection plate for air/electrics and brakes with generous space for easy operation Roll tarp, stows to the right (FR-right), with central locking on FR-left Country of Registration/Plates Germany Homologation according to EC 2007/46 Superstructure strength according to EN 12642 24/7-Service hotline Prepared for single-line license plate holder Warning panel according to ECE-70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Chassis: DB 7350 Nova Grey "10-year warranty against rust-through" Support legs: galvanized Trough: RAL of choice, single-color Roll tarp: RAL 7035 light grey

Condition: new, machine/vehicle number: 74dd481d88dffaf9218e6ee58, empty load weight: 5,200 kg, maximum load weight: 33,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,110 mm, suspension: air, tire size: 385/65 R 22,5, Further information Chassis Semi-trailer Tipper Fine-grain steel welded construction in basic lightweight design, fifth wheel plate with replaceable 2" kingpin. Curved front end, patented. Central telescopic support leg; unhitching with load is not possible, and when unhitched, the vehicle must be parked on a rearward slope. Wheel chocks with holder. Folding underrun protection. Half-shell mudguards. Integrated mudguard holder with stone-repellent surface. Tarp pole with holder. Tow hook at the rear. Axles & Suspension SAF disc brake axles with 430 mm disc diameter. Axle/chassis laser alignment reduces tire wear and fuel consumption. Axles in off-road configuration. Air suspension. 1st axle lift axle, automatic, including forced lowering and starting aid. Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through. Brake system 2-line compressed air brake system, color-coded line routing for easy service. Spring-loaded parking brake. 2 fool-proof coupling heads at the front, without connecting line. EBS (Electronic Braking System) with EBS socket at the front, without connection cable. Note: The trailer may only be towed by vehicles that guarantee the effectiveness of the ABS! With lift & lower valve. Vehicle stability control system. Wheels and tires 385/65 R22.5. Steel rims, factory silver. TPMS (Tire Pressure Monitoring System) according to ECE R 141, display via truck dashboard over EBS system, not installed in the trailer (prerequisite: must be available in the truck; applies to basic tires only). Electrics 24 Volt, multi-chamber tail lights, lateral yellow LED lighting. Side yellow LED lights linked to turn signal (“flashing side marker lights”). 2 white front position lamps. 2 white/red lane control lights rear. 2 x 7-pole fool-proof sockets at the front, without connection cable. Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed section, NW 48 mm (without hose connection). Operated hydraulically via truck PTO. Bodies Steel round tipping body in Stone Master design made from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic system and ladder at the front wall. Greenline – conical and aerodynamic body shape. Codoi Ri A Iepfx Airjgu Shovel and broom holder externally on front wall. Membrane Rear Wall Rear wall as pendulum flap with double-joint hinge, externally mounted with dual hook lock. 2 clamping screws with wing nut locks at lower sides. Side walls are 4 mm thick throughout, floor 4/5 mm thick; wear- and weight-optimized design. Standing platform with ladder, connection plate for air/electrics and brake with ample space for optimum operation. Roll tarp with stowage to passenger side (FR-right), with central locking on driver’s side (FR-left). Approval country/plates Germany Type approval per EC 2007/46 Body strength per EN 12642 24/7 service hotline Prepared for single-line registration plate holder Warning plate per ECE – 70 Outline marking with reflective tape according to ECE R 048, side white, rear red. Paintwork Frame: DB 7350 Novagrau '10-year warranty against corrosion' Support feet: galvanized Body: RAL of choice, single color Roll tarp: RAL 7035 light grey

Condition: new, machine/vehicle number: 637ca014c140e4e48dc3231a0, empty load weight: 5,700 kg, maximum load weight: 33,300 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,700 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 31 m³, total length: 9,090 mm, total width: 2,550 mm, total height: 3,110 mm, suspension: air, tire size: 385/65 R 22,5, Further Information Chassis: Semi-Trailer Tipper Fine grain steel welded construction in basic lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front end, patented design 24t 2-speed landing gear, single-sided operation, with straight lower section, without load compensation Wheel chocks with holders Foldable underrun protection Half-shell mudguards Integrated mudguard holder with stone-repellent surface With anti-spray mudflaps on the rearmost axle only Tarp support bar with bracket Tow hook at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser alignment for reduced tire wear and fuel consumption Air suspension 1st axle: automatic lift axle including forced lowering and start-up aid Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty Braking System 2-line compressed air brake system, color-coded piping for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without interconnecting lines EBS – Electronic Braking System, with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure ABS functionality! With lift & lower valve Vehicle – Driving stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver TPMS "Tire Pressure Monitoring System" per ECE R 141, display via the towing vehicle (via EBS, without separate truck installation; availability must be provided in the truck; applies to standard tire fitment only) Electrics 24 V, multi-chamber lights, yellow side LED lighting Yellow side LED lighting linked to indicators "Flashing side markers" 2 x 7-pin fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chromed, with HDK screw coupler, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Tipper Body Steel round body in "Stone Master Design" made of high abrasion resistant HB 400/450 steel. Slanted front wall with external hydraulic cylinder mounting. Internal ladder at front wall. Greenline – conical and aerodynamic body shape Shovel and broom holders on exterior front wall. Membrane tailgate Tailgate as pendulum flap with double-joint hinge, externally mounted with double hook locking. 2 clamping screws with hand levers at lower sides. Cgedji Rivdopfx Airou Sidewalls continuous 4 mm thick, floor 4/5 mm thick, wear- and weight-optimized construction. Standing platform with steps, connection plate for air/electrics and brakes with ample free space for optimum handling. Roll tarp stowed on right side (FR-right), with central locking on left (FR-left) Country of Registration / Signs Germany Approval according to EC 2007/46 Body strength per EN 12642 24/7 service hotline Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on sides and red at rear Paintwork Chassis: DB 7350 Nova Grey "10 years anti-corrosion warranty" Landing legs: Black coated Body: RAL of choice, single color Roll tarp: RAL 7035 light grey

Condition: new, machine/vehicle number: 2f960ff7c44de83fd060ec5df, empty load weight: 6,750 kg, maximum load weight: 32,250 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space width: 2,480 mm, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,670 mm, suspension: air, tire size: 385/65 R 22,5, Further information Chassis Tipper Semi-Trailer Fine-grain steel welded construction, in Basic lightweight design, fifth wheel plate with replaceable 2" king pin Patented curved front wall 24 t, 2-speed landing gear, single-sided operation, with straight base, without sliding compensation Wheel chocks with holders Foldable underride guard Half-shell mudguards Integrated mudguard bracket with stone-repellent surface Tarpaulin pole with holder Tow hook at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Cgjdei Rizfspfx Airou 1st axle automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10 years warranty against rust-through Brake system 2-line air brake system with color-coded line layout for easy service Spring-loaded parking brake 2 interchangeable coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via towing vehicle display through EBS, without truck installation (must be pre-equipped on the truck. Only applies to standard tires). Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting combined with indicator function 'blinking side markers' 2 x 7-pin interchangeable sockets at front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Body/Tipper body Steel box body made of highly wear-resistant HB 400 steel, inclined front wall with external hydraulic cylinder mount. Shovel and broom holder outside on front wall. Interior with climb access on the front wall. Continuous 3 mm side walls, 3 mm continuous floor Membrane tailgate Internal width at bottom approx. 1440 mm Aluminum tailgate with 'double joint hinge', split 1/2 to 1/2, with swing arm at top, each leaf equipped with a grain chute. Standing platform with access, connection plate for air/electric and brake with large clearance for optimal handling. Roll tarp stored on right side, central locking on left side Registration country/plates Germany Approval according to EC 2007/46 Body strength according to EN 12642 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE - 70 Contour marking stripes according to ECE R 048, side white and rear red Paintwork Frame: DB 7350 Nova Gray '10-year warranty against rust-through' Body: RAL of choice, single color Roll tarp: RAL 7035 light gray

Condition: new, machine/vehicle number: aaa375d3c15c697ac80fb51f9, empty load weight: 7,900 kg, maximum load weight: 31,100 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space width: 2,330 mm, loading space height: 1,950 mm, loading space volume: 50 m³, total length: 11,200 mm, total width: 2,550 mm, total height: 3,470 mm, suspension: air, tire size: 385/65 R 22,5, Further information Chassis Semi-trailer Tipper Fine-grain steel welded construction, lightweight design, with slight offset, fifth wheel plate with replaceable 2" kingpin Codpfx Aji Rizqeirjgu 24-ton 2-speed landing gear, single-sided operation, with straight lower section, without sliding compensation Wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard holders with stone-repellent surface Tarp rod with holder Tow hook at the rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axles and running gear laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism with 10-year warranty against rust-through Braking System 2-line compressed air brake system with color-coded hoses for easy maintenance Spring-actuated parking brake 2 non-interchangeable coupling heads at the front, without connector line EBS (Electronic Braking System) with EBS socket at the front, without connector cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve Vehicle – driving stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via tractor dashboard (via EBS, without truck installation — vehicle must support this; only for standard tires) Electrics 24 volt, multi-chamber tail lights, side yellow LED lighting Side yellow LED lighting linked to indicators – flashing side marker lights 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connector cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Hydraulic actuation via truck PTO Body Steel half-pipe body made of highly abrasion-resistant HB 400 steel, inclined front wall with external hydraulic cylinder mount. Folding aluminium splash guard on front right for tarpaulin. Shovel and broom holder mounted on exterior of front wall. Access inside at the front wall. Side walls continuous 4 mm thick, floor continuous 5 mm thick Membrane-type rear wall Rear wall with 2-leaf door division 1/2 to 1/2, with 1 slider in the right leaf With external locking bar and mechanical bottom lock Standing platform with access ladder, connection plate for air/electric and brake with ample space for optimal handling Tarpaulin rolls to right side (FR-right), with central locking on FR-left Registration country/License plates Germany Type approval according to EC 2007/46 Body strength in compliance with EN 12642 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE - 70 Contour marking with reflective tape according to ECE R 048, side white and rear red Painting Frame: DB 7350 Nova Grey 10-year warranty against rust-through Landing legs: black coated Body: RAL as requested, single color Tarpaulin: RAL 7035 light grey

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2015, Equipment: ABS, Fliegl walking floor * EZ 06.03.2015 * 3-axles * 92 cubic meters * 1st axle lift axle * SDS 390 * Empty weight: 7,200 kg * Tires: * 1st axle 385/55 R 22.5 v.l. 8 mm & v.r. 11 mm * 2nd axle 385/55 R 22.5 v.m.l. 10 mm & v.m.r. 11 mm * 3rd axle 385/55 R 22.5 h.l. 10 mm & h.r. 9 mm * German trailer / German semitrailer * 1 vehicle owner / 1 owner Cgodervu Snjpfx Airju * All information without guarantee * Further information and criteria on additional services / Additional service * Repainting, retrofitting possible / repainting possible * Short-term license plate / customs license plate * Transfer and shipment possible * Help with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimal financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop * Mówimy po polsku. * We speak English. * Goworim po russki * The repainting in your desired color is possible in our house at a reasonable price and in good quality. * You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34202036640, empty load weight: 6,213 kg, maximum load weight: 35,787 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2025, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22,5", color: yellow, The images shown are archive photos; the vehicle may still be in use! Approx. fifth wheel height: 1200 mm Chassis: Semi-trailer tipper Basic lightweight construction, kingpin plate with interchangeable 2" kingpin, patented curved front bulkhead Folding underrun protection, underrun protection with spring assistance for easier handling Integrated mudguard bracket with stone-repellent surface Axles & Suspension: SAF disc brake axles with 430 mm disc diameter; axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle including forced lowering and starting aid, activation by "3x braking" (starting aid is functional up to a 30% axle overload and up to a maximum speed of 25 km/h) Braking system: 24 Volt EBS electronic braking system with EBS socket at the front (no connection cable), test port for brake cylinder pressure routed to the outside of the EBS module, with raise & lower valve Paver brake, electrically operated from the truck without truck installation, automatic tipper lowering with shut-off valve "TPMS" tire pressure monitoring system as per ECE R141, display via monitor in towing vehicle through EBS (requires appropriate truck setup; only for standard tires) Axle load detection via EBS-CAN bus signal for display in the cab; truck must be preconfigured, no truck installation Wheels and Tires: 385/65 R22.5 steel rims Electrics: Side-mounted yellow LED lights synchronised with indicators (flashing side lights) 2 white front position LED lights 2 white/red rear marker LED lights LED work lights on both sides; 2 additional work lights integrated into the rear Hydraulics: Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO (power take-off) Body/Tub: Steel round body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mount. Internal ladder at the front bulkhead Greenline - conical and aerodynamic body shape “Membrane” tailgate Tailgate as hydraulic rear door opening upwards; clearance approx. 2,200 mm Side walls continuously 5 mm thick, base continuously 8 mm thick Body is insulated version, Fliegl Asphalt Profi Thermo, body insulated at the front, sides, bottom, and rear with Fliegl Isotherm "Flip Top sliding cover", automatic rear lock as folding hoop. Cover built to front. Electrically operated cover with 7-pin plug (charging plug) at front, no connection cable, no truck installation; operation on trailer and via remote control. Operational notes: For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent damage and corrosion from the material. The specified gross weight is technically possible, but depending on the load, the gross weight may not be achievable while observing permissible axle, support, and coupling loads. (Improper load distribution may lead to poor driving and tracking performance) Paintwork: Frame: DB 7350 Nova Grey "10 years warranty against corrosion" Support legs: black coated Body: RAL 1007 Narcissus Yellow Cgjdpfx Aoyylapsirju Roll tarp: RAL 7038 Agate Grey

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,200 kg, maximum load weight: 27,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 R22,5", Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis, Saddle, and Transport Company Fine-grained steel welded construction in lightweight design, saddle plate with 2 interchangeable kingpins, main frame reinforcement for 25 tons in the center of gravity at a loading length of 3 m in the retracted state. 13 pairs of hooks for tie-down strap attachment welded onto the cross members. 23 pairs of lashing eyes recessed in the outer frame, each rated at 3.5 tons. Outer frame with Load-Lock profile for tie-down strap attachment. Note: Not usable with sideboards! 24 tons, 2-speed support leg in reinforced design for loaded docking, single-sided operation. Chocks with holder. Aluminum side impact protection. Underrun protection. Semi-fender mudguards. with anti-spray flaps according to EC standards. 1 spare wheel holder for 1 wheel, with wheel fastening kit. 1 closed stake pocket box, open at the top, below the loading platform, doors on both sides, w=450 mm/H=400/420 mm/d=2460 mm. 6 pairs of extendable stake pockets for square tube stanchions 80x80 mm, extendable from loading width of 2000 mm to 3100 mm. 4 pairs of stake pockets recessed in the outer frame, for square tube stanchions 80x80 mm. 11 stake pockets recessed in the middle of the floor, for square tube stanchions 80x80 mm, with reinforcing beam, installed between the outer stake pockets. 5 x 3 pairs of stake pockets recessed on the outside of the longitudinal beams, for square tube stanchions 80x80 mm, including reinforcing beams – for load securing to the front and rear for the transport of construction steel mesh 2x5000 mm or 2x 6000 mm. 6 lightweight plug-in stanchions, B=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, with rope guide at the top for strap tensioning. 12 lightweight plug-in stanchions, B=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded on at the bottom on both sides. Note: Stake pockets/plug-in stanchions are not designed for the sole securing of long materials, pipes, etc. without wrapping. 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock. (Lock not included) 6 construction steel winches with wire rope and swivel hook, with rope passage through the outer frame, 1 removable attachment gearbox for construction steel winch – supplied separately. Telescoping Codsi Ri Szopfx Airsgu Main frame telescopic extendable by max. 4,000 mm and lockable approximately every 500 mm. Locking with pneumatic pin locking + display of frame locking on both sides, operated via a hand knob, control for brake/locking and suspension on the left front above the axles. Storage compartment between the longitudinal beams in the extended state. Axles + Suspension SAF disc brake axles with 430 mm disc diameter. Last axle with trailing arm steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via a hand knob, as well as manually via a switch in the towing vehicle (Pin 10), without truck installation. Axle spacing offset mm Air suspension 1st axle automatic lift axle, additionally electrically operated from the truck, with start-up aid. Braking system 2-line compressed air braking system. Color-coded line routing for easy servicing. Spring-loaded parking brake. 2 fail-safe coupling heads at the front. EBS manufa