Used Fliegl 3-Achs Plateau Sds 380 Spezial Mega-Z for sale (85,585)

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801013475, empty load weight: 7,180 kg, maximum load weight: 28,820 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, available in multiple units Rjdpfxjza Aiye Ag Ueu Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, additional splash guard riveted to the underside as a sheet of metal, in the neck area above the rear axle of the semi-trailer and above the wheels on the vehicle, frame in reinforced design for vehicle loads up to the outer frame, outer frame with "Load-Lock profile" approximately every 400 mm for securing lashing straps, 10 pairs of lashing rings embedded in the top/outside of the outer frame, each rated at 10 tons, 24 tons. Two-stage support winch, single-side operation, with semi-circular lower part and straight connecting plate, with stroke compensation, folding rear support, support wedges with holder, aluminum side impact protection, steel under-ride protection, quarter panel fenders in front of and behind each axle, with additional sheet metal splash guard above the wheels, with anti-spray flaps according to EC regulations, 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking recesses embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters, (additional transverse support required at the front and rear of the container, the container must rest evenly over its width in conjunction with the locks, transverse supports are not included in the scope of delivery), attachment rail for loading ramps at the rear extension over the entire width, rear extension mechanical, with hand crank, extendable by approximately 1,500 mm, lockable every 500 mm, including under-ride protection with lighting that can be extended, in the wheel well area with Lohr sheet metal, center with steel diamond plate, storage space for loading ramps integrated in the rear extension, usable only when the rear extension is extended by approximately 1000 mm, for transporting the ramps with the rear extension retracted - storage space for ramps in the FR, located to the right in front of the axles. 1 pair of ramps, 3,000 mm long, 300 mm wide, load-bearing capacity per pair 6,000 kg, electric cable winch, 24 volts, pulling force approximately 8165 kg, mounted centrally at the very front, operated with a wireless remote control, cable length 35 m x approximately 10 mm, with roller cable guide and removable guide rollers. Axles + Suspension: SAF/BPW drum brake axles, at the manufacturer's choice, air suspension, 1st axle automatic lift axle, additionally electrically operable from the truck, including forced lowering and starting aid. Braking System: 2-line pneumatic braking system, color-coded line routing for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, EBS, electronic braking system with EBS socket at the front, without connection cable, with raising & lowering valve with quick vent, holding function in lowered position + auto-reset function, vehicle stability system, axle load recognition via EBS-CAN bus signal. Wheels and Tires: 235 / 75 R 17.5", manufacturer's choice, steel rims in twin arrangement. Electrical System: 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole and 1 x 15-pole tamper-proof sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, double LED illuminated and

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801012811, empty load weight: 6,350 kg, maximum load weight: 28,650 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: silver, available in multiple units Chassis, semi-trailer, forwarding agent: fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, frame in reinforced design for vehicle loading, outer frame with "Load-Lock profile" approximately every 400 mm for lashing straps, 10 pairs of lashing points recessed in the outer frame at the top/outside, each rated at 10 tons, foldable rear supports, 2 wheel chocks with holder, aluminum side underrun protection, steel underrun protection galvanized, quarter panel fenders in front of the 1st axle and behind each axle, with anti-splash flaps behind each axle, 1 spare wheel holder for 1 wheel, with wheel fastening kit, 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking devices recessed in the floor for 2 x 20 ft or 1 x 40 ft containers, the foremost position is a foldable locking device, 10 pairs of stake pockets recessed in the outer frame, internal dimension 70 x 40 mm, 10 stake pockets recessed in the middle of the floor, internal dimension 70 x 40 mm, 2 lashing/stake rails recessed transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stake pockets approx. 2170 mm), approx. 100 mm high. With 20 mm round steel strips, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). Bottom with angle plate as a closure, open halfway down. For lashing and inserting stakes 80 x 80 mm. Arrangement: Position 2 and 4 according to Fliegl data sheet, 20 stake pockets, hot-dip galvanized, storage space for aluminum ramps, ramps can be slid in from the rear, 3 pairs of foldable eyelets 10 tons in the outer frame (1 in front of the headboard and 2 in the rear area), Axles + suspension: SAF disc brake axles, air suspension, 1st axle automatic lift axle, including forced lowering and starting aid, operation "3x brake", axle lift below the recommended ride height, therefore no guarantee for tire damage Braking system: 2-line compressed air braking system, color-coded line routing for easy service, spring-loaded parking brake, 2 fail-safe coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable, with lifting and lowering valve, 2 ride heights, adjustable via hand control, 1 x for saddle height 980 mm, 1 x for saddle height 1100 mm, ride height in conjunction with lift axle, when the lift axle is raised, the loading or overall height increases by 50 mm, vehicle - driving stability system Wheels and tires: 435/50 R19.5, brand according to manufacturer's choice, steel rims Electrical system: 24 Volt, multi-chamber lights, yellow LED lighting on the side, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, LED work lights on the side, 1 on the left and 1 on the right, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, LED illuminated and extendable to 4000 mm, additional 7-pin socket in the underrun protection at the rear Rjdeza Agrjpfx Ag Usu Floor: Sieve plate, approximately 30 mm thick, on longitudinal girders for high point load capacity for forklift axle load up to a maximum of 7100 kg, Front wall / front corner posts: 25 mm aluminum hollow profile, 1350 mm high, corner posts steel in box profile, front wall additionally covered with 1250 mm h

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902028859, empty load weight: 5,660 kg, maximum load weight: 29,340 kg, overall weight: 35,000 kg, axle configuration: 3 axles, total length: 13,700 mm, total width: 2,550 mm, total height: 3,700 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: red, Chassis, Semi-trailer, Transport Company Steel welded construction in reinforced design, only 2 longitudinal members as double T-beams with steel/diamond-plate between the longitudinal members, kingpin plate with replaceable 2" kingpin. Mudguard for tail lights. 8 pairs of lashing eyes screwed or welded to the frame, at the manufacturer's discretion. 24 tons, 2-speed support legs, single-sided operation, with straight lower part, without thrust compensation. Chocks with holder. Aluminum side impact protection. Galvanized steel underrun protection. Half-shell fenders with anti-spray flaps according to EC. 1 spare wheel holder for 1 spare wheel, with wheel fastening kit. 1 storage box recessed between the longitudinal members. 8 pieces of wood rack supports, at the manufacturer's discretion, screwed to the frame, each with 2 extendable wood racks from 1800 to 2800 mm, 7 tons per pair. Axles + Suspension BPW disc brake axles with 430 mm disc diameter. Air suspension with lift and lower valve, safety cable on the axles. 1st axle automatic lift axle, including forced lowering and starting aid, operated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h). Axle spacing staggered 1410/1310 mm (combined transport) up to 44 tons total weight. Wheels and Tires 385 / 65 R 22.5" at the manufacturer's discretion. Steel rims, factory silver. Braking System 2-line pneumatic braking system. Spring-loaded parking brake. Axle load recognition via EBS-CAN bus signal, for display on the dashboard in the cab; the truck must be correspondingly prepared, no truck installation (no calibrated scale). 2 non-interchangeable coupling heads at the front, without connecting cable. EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! "Safe Parking" Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. 2 white position lights at the front. 2 white/red marker lights at the rear. Redpfx Ageza Anvs Ueu 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable. Front wall / corner posts Steel / grid front wall, approx. 2300 mm high, screwed to the frame. Approval / Signs Country of approval: Germany. Type approval according to EC 2007/46. Prepared for single-row license plate holder. Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. Warning sign according to ECE - 70. Paint Frame: DB 7350 Novagrau (dark grey) Support legs: Black coated. Front wall: Hot-dip galvanized.

Condition: new, machine/vehicle number: f044065451f6d849ee7a5b9f8, empty load weight: 5 kg, maximum load weight: 29 kg, overall weight: 35 kg, axle configuration: 3 axles, tire size: 385 / 65 r 22,5, Further information Chassis semi-trailer forwarding Welded steel construction in reinforced design, only 2 side members as double T-beams with steel/checker plate between the side members, saddle plate with replaceable 2 kingpins. Protective plate for rear lights. 1 steel storage box, recessed between side members 8 pairs of lashing eyes bolted or welded to the frame at the manufacturer's choice 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Half-shell mudguards with anti-spray flaps according to EC 1 spare wheel holder for 1 e-wheel, with wheel fastening set 8 wooden stanchions of the manufacturer's choice, bolted to frame with 2 wooden stanchions each, telescopic from 1800 to 2800 mm, per pair 7 to. Axles + suspension SAF disk brake axles with 430 mm disk diameter Air suspension with lifting & lowering valve, safety cable on the axles 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Axle spacing offset mm (combined transport) up to 44 tons gross train weight Wheels and tires Rjdpfxoi Rivwe Ag Usu 385 / 65 R 22,5 at the manufacturer's discretion Steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installed (no calibrated scales) 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable Front bulkhead/front stanchions Steel/grid bulkhead, approx. 2,300 mm high, bolted to the frame Approval / plates Country of approval: Germany Approval according to EC 2007/46 Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray Black coated support legs Front wall hot-dip galvanized Attention: Archive pictures!

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33901014200, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space height: 900 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,500 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: grey-black, Chassis, Semi-trailer, Logistics Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin Outer frame slightly angled, new design with "Load-Lock profile" for securing lashing straps 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without lateral support Free support leg angle or free swivel radius to the rear, approx. 1920 mm 2 support wedges with holder Aluminum side impact protection Steel underrun protection Partial wheel covers in front of and behind each axle Splash flaps in front of the 1st axle and behind each axle with anti-splash protection, according to EC regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Axles + Suspension SAF drum brake axles "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist function, activated by "3x braking" (starting assist function is operational up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended ride height, therefore no guarantee for tire damage Braking System 2-line compressed air brake system Color-coded line routing for easy maintenance Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving Stability System Wheels and Tires 235/75 R17.5, brand according to the manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable Redpfxoza A Txj Ag Ueu Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5,600 kg Front wall / corner posts 25 mm aluminum hollow profile, 1,350 mm high, corner posts made of steel in a full-volume design Country of Approval / Signage Germany With DEKRA inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau Front corner posts: hot-dip galvanized Front wall: aluminum

Condition: used, functionality: limited functionality, machine/vehicle number: WFDFLT33901007921, empty load weight: 9,000 kg, maximum load weight: 26,000 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2018, next inspection (TÜV): 02/2027, loading space length: 15,150 mm, loading space width: 2,480 mm, total length: 15,350 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: black, Year of construction: 2018, Attention, the images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 26,000 / 30,000 kg Permissible/technical axle load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight approx.: 9,000 kg +/- build tolerance Overall length approx.: 13,850 + 1,500 mm Maximum overall width: 2,550 mm Overall height approx.: 3,200 mm Internal length approx.: 13,650 + 1,500 mm Neck length approx.: 4,050 mm Lower deck length approx.: 9,600 + 1,500 mm Internal width approx.: 2,480 mm Loading height, lower deck approx.: 900 mm Coupling height approx.: 1,150 mm Kingpin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis, semitrailer for forwarding operations Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin Lashing rings recessed in outer frame, rated at 2.5 t each 24 t two-speed landing gear, single-sided operation, with straight base, without compensator Chocks with holders Aluminium side underrun protection Steel rear underrun protection Quarter-shell mudguards in front of first axle and behind each axle With anti-spray mud flaps behind each axle Rear impact guard Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm Document box at the front bulkhead Telescoping Central beam frame with neatly welded, interlocking telescopic frame components. Extensible by max. 1,500 mm and can be secured after approx. 1,500 mm; outer frame add-on sections approx. 1,500 mm long, for hooking into outer frame in telescoped state. Locking via mechanical pin system. Axles and Suspension SAF drum-braked axles Air suspension Braking System Dual-line compressed air brake system Spring-loaded parking brake Two fail-safe coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at front, without connecting cable Note: This trailer may only be towed by vehicles that can ensure effective ABS operation! With lift & lower valve Wheels and Tyres 235 / 75 R 17.5 Steel rims in twin arrangement, factory silver Rsdpfxsy Slp Io Ag Usu Electrics 24-volt, multi-chamber lights, yellow LED side marker lighting Two white position lights at front Two white/red lane position lights at rear 2 x 7-pin fail-safe sockets at the front, without connecting cables Rotating beacon with holder, operated via parking lights (beacon removable) Floor Approx. 30 mm thick phenolic ply boards, high point load capacity for forklift axle loads up to max. 7,100 kg Steel/chequer plate covering in wheel arch area where required Front bulkhead/corner posts 25 mm aluminium hollow section profile, 1,950 mm high, steel corner posts, full height for volume version Approval / Signs With Dekra inspection and certificate Prepared for single-line number plate holder Warning sign according to ECE - 70 Contour marking with reflective strips in accordance with ECE R 048, white on sides and red at rear Attention, the images shown are archive photos! The vehicle may currently be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33903000364, empty load weight: 6,120 kg, maximum load weight: 28,880 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2022, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,800 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: silver, Year of construction: 2022, Please note: The images are archive photos! The vehicle may still be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 28,880 / 32,880 kg Permissible/technical aggregate load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 6,120 kg +/- manufacturing tolerance Overall length approx.: 13,800 mm Maximum overall width: 2,550 mm Overall height approx.: 2,388 mm Gooseneck length approx.: 4,050 mm Low bed length approx.: 9,600 mm Loaded loading height in the low bed approx.: 900 mm Internal width approx.: 2,480 mm Coupling height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer Forwarder Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin Telescoping front low bed extendable by approx. 1,500 mm, lockable every 500 mm Slightly inclined outer frame, new design with 'Load-Lock profile' for attaching lashing straps 'Patented Load-Lock-Cross' for lashing straps integrated in the cross member under the outer frame 24 t, 2-speed landing gear, single-sided operation, with straight lower part, without compensating support Free landing gear corner dimension and rear swing clearance approx. 1,920 mm Aluminum side underrun protection Steel rear underrun protection Quarter-shell mudguards 9 pairs of lashing/rack rails transverse in the floor, embedded up to the main frame, approx. 100 mm high. With 20 mm round steel rails, top and bottom, distance between upper and lower rails approx. 60 mm (of the round steel). Bottom has angle plate, half open downward. For lashing and inserting stakes 80 x 80 mm (3 pairs in the neck, 6 pairs in the low bed section). 3 pairs of stake pockets recessed in the outer frame, approx. 72 x 42 mm internal dimension Axles & Suspension Drum brake axles according to manufacturer specification 'Axle/chassis laser-aligned' – reduces tire wear and fuel consumption Air suspension Brake System 2-line compressed air braking system Color-coded lines for easy service Spring-loaded parking brake 2 error-proof coupling heads at front, without connecting line EBS, Electronic Braking System with EBS socket at front, without connection cable Note: The trailer may only be towed by tractors with functional ABS! With raise & lower valve Vehicle driving stability system Rsdpfx Agjy Slhqj Uju Wheels and Tires 235/75 R17.5, manufacturer at discretion Steel rims, factory silver Electrical System 24V, multi-chamber lights, side-mounted yellow LED lighting (recessed) 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin error-proof sockets at front, without connecting cable 1 additional LED work light at rear, operated via reverse light Floor Anti-slip phenolic plywood panels, approx. 30 mm thick, high point load capacity, suitable for forklift axle loads up to max. 5,600 kg Front wall / Corner stakes front 25 mm aluminum hollow profile, 1,350 mm high Country of registration / license plates Germany Inspection and certification in Bosnia 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides, red at rear Warning sign according to ECE - 70 Paintwork Frame: Hot-dip galvanized including passivation '15-year warranty against rust-through' Front corner stakes: Hot-dip galvanized Front wall: Aluminum

Condition: used, axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,700 mm, loading space width: 2,400 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2023, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 6080 kg, Gross vehicle weight: 39000 kg, Chassis type: Complete chassis, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2023, Sunroof, Axle type: SAF = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 9 mm; Tire tread depth right: 9 mm Axle 2: Tire tread depth left: 10 mm; Tire tread depth right: 10 mm Axle 3: Tire tread depth left: 8 mm; Tire tread depth right: 7 mm Weights Unladen weight: 6,080 kg Payload: 32,920 kg GVW: 39,000 kg Rsdpfjy U Ut Usx Ag Ueu Functional Sunroof: Yes Environmental Emission class: Euro 0 Maintenance APK (Technical Inspection): valid until 11.2026 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various production years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014072, empty load weight: 7,300 kg, maximum load weight: 27,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,530 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 3,330 mm, suspension: air, tire size: 385/65 R 22,5", tire condition: 100 %, color: silver, Chassis, semi-trailer, transport company Fine-grained steel, welded lightweight construction, kingpin plate with replaceable 2" kingpin, main frame reinforcement for 25 tons, with center of gravity at 3 m loading length in the retracted state. 13 pairs of hooks for lashing straps, welded onto the cross members. 23 pairs of lashing eyes recessed in the outer frame, each rated at 3.5 tons. 24-ton, 2-speed support winch in reinforced design for loading and unloading, single-sided operation. 1 spare wheel holder for 1 spare wheel. 1 storage compartment for stowage, open, with the option of stowing items behind the front wall or in a compartment between the extended longitudinal beams! 4 pairs of stake pockets recessed in the outer frame for rectangular tubes 80x80 mm. 5 stake pockets recessed in the middle of the floor for rectangular tubes 80x80 mm, with reinforcing beam, installed between the outer stake pockets, except for one. 6 lashing/stake rails recessed across the floor over the entire width to the outer frame (max. usable internal width between the outer stake sockets approx. 2170 mm), approx. 100 mm high. With 20 mm round steel rails, top and bottom, spacing from top to bottom approx. 60 mm (of the round steel). Bottom with an angle plate as a closure, half open downwards. For lashing and inserting stakes 80 x 80 mm. Pull-out ladder at the rear on the right side. 5 x 3 pairs of stake pockets recessed on the outside of the longitudinal beams for rectangular tubes 80x80 mm, including reinforcing beams. 10 "lightweight" stake sockets, B=80/ T=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded on at the bottom on both sides. 2 plastic toolboxes, b=600 / h=425 / t=460 mm, lockable. Telescoping extendable by a maximum of 4,000 mm and lockable approximately every 500 mm. Main frame telescoping Locking with pneumatic bolt locking + display of frame locking on both sides, operated via hand knob, operation for brake/locking and suspension on the left side in front of the axles. Redpfxsza Dyye Ag Uou Storage compartment between the longitudinal beams in the extended state. Axles + Suspension SAF disc brake axles with 430 mm disc diameter. Last axle with trailing arm, with automatic reversing lock via reversing light and additional locking function on the vehicle via hand knob. Axle spacing offset 1310/1410 mm. Air suspension. 1st axle automatic lift axle, also electrically operated from the truck, with start-up assistance. Braking system 2-line compressed air braking system. Spring brake parking brake. 2 non-interchangeable coupling heads at the front. EBS Wabco, electronic braking system with EBS socket at the front. With raising & lowering valve + auto-reset function. Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be appropriately pre-equipped. Wheels and tires 385/65 R 22.5" steel rims. Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side. 2 white position lights at the front in LED. 2 white/red side marker lights at the rear in LED. 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front. 1 rotating beacon with bracket, switched via side light. 2 pairs of warning signs, LED illuminated and extendable to 3,500 mm. Flashing side marker lights. Side 7-pin sockets, positioning 2x front panel, 2x support legs, 2x rear end. 1 additional 7-pin socket, in the underrun protection at the rear. 2 additional LED work lights, top inside on the fron

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33802035478, empty load weight: 4,660 kg, maximum load weight: 33,340 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 10,450 mm, total width: 2,550 mm, total height: 1,325 mm, suspension: air, tire size: 385/55 R22.5", tire condition: 100 %, color: grey-black, Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin and 2 kingpin positions Front locking on tipper ram mounting with lateral wedge locks, rear locking on continuous pivot shaft with return spring Without subframe for self-supporting containers Container attachments: Locking crossbeam, 2-fold for locking 1 x 30 ft container 24 ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-out compensation Free support leg spacing or free rear swivel radius approx. 1850 mm 2 chock blocks with holder Aluminum side underrun protection Without underrun protection Semi-fender With anti-spray flaps according to EC Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection). Attention! Tilting angle limited! Operation hydraulically via truck auxiliary drive Hydraulic connection with hose and HDK screw fitting NW = 48 mm with knurled nut Axles + Suspension BPW disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" Reduces tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons total weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, operation "3x brakes" (start-up assistance is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Braking system 2-line pneumatic braking system Color-coded line routing for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and Tires Rodpjzaz Tkofx Ag Uou 385/55 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Country of approval / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau "10-year warranty against rust" Support legs black coated

Condition: used, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2019, loading space length: 7,200 mm, suspension: air, tire size: 445/45 R19,5 160J, color: other, gearing type: other, front tire size: 445/45 R19,5 160J, rear tire size: 445/45 R19,5 160J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Rjdoy T E H Nepfx Ag Uou

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802035390, empty load weight: 3,160 kg, maximum load weight: 34,840 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22,5*, color: grey, Year of construction: 2024, The images are archive images! The vehicle may still be in use! Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin (Chassis prepared for subsequent retrofitting, drip tray, 4 hose holders, steps, Fliegl standard) Container fittings: 1 x 20 ft center (or swap body container 7.15 / 7.45 / 7.82), not retractable at the front, with longer twist locks for the container locking mechanism. 24 ton, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with sliding adjustment Wedge blocks with holder Side underrun protection Rear underrun protection with deep step for easier access + step inside Half-shell fenders with anti-spray flaps according to EC Rjdpfx Agey Tvuwo Uju Axles + Suspension BPW or SAF disc brake axles at the manufacturer's choice, with 430 mm disc diameter, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons total weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assist, operated by "3x braking" (start-up assist is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Braking system 2-line pneumatic braking system Color-coded line routing for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line 24 Volt EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! with raising and lowering valve + auto-reset function Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, truck must be pre-equipped accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, (Note! with certain tractor units, false diagnoses may occur, although the function is given) 2 white position lights at the front in LED 2 white/red side marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable additional LED work light at the rear, switched via reversing light Operating instructions This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration/signs Germany with Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline prepared for single-line license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side, yellow at the rear

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802030369, empty load weight: 31,110 kg, maximum load weight: 34,889 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 01/2027, total length: 7,390 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5*, color: red, Year of construction: 2022, The images are archive images; the vehicle may still be in use. Redpfx Aoy Tvphjg Uju Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin, container locks: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, with the longer version of the pivot pins for the container locking mechanism. 24 tons. Two-stage support jacks, single-person operation, with straight lower part, without lateral thrust compensation. Outrigger plates with holder, side impact protection, underrun protection (aluminum). With anti-splash flaps according to EC, stainless steel drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, incl. drip tray, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam. Hose racks approx. 4500 mm long (including hose box) for hose pipes 2 x DN 200 on the outside + 2 x DN 160 in the center, hose box (stainless steel) at the rear, 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes, stainless steel grounding plate at the rear on the right-hand side of the frame, with international grounding sticker on the frame, steps at the rear right on the underrun protection, at the rear on the right-hand side on the main beam, tread plate approx. 260 mm long and 300 mm wide. Axles + Suspension SAF disc brake axles, "axle / chassis laser-measured" reduces tire wear and fuel consumption, axle spacing offset 1410/1310 mm (combined transport), up to 44 tons total weight. Air suspension, 1st axle automatic lift axle, including forced lowering and starting aid, activation "3x brake" (starting aid is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h). Braking system 2-line compressed air braking system, color-coded line routing for easy servicing. Spring brake parking brake. 2 non-interchangeable coupling heads at the front, without connection line, EBS, electronic braking system with EBS socket at the front, without connection cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve, vehicle - driving stability system. Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be appropriately prepared, no truck installed. Wheels and tires 385/65 R22.5", manufacturer's choice, steel rims, factory silver. Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pole socket at the front, without connection cable. Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached while complying with the permissible axle / support and saddle loads. (Poor driving and handling behavior due to incorrect load distribution is possible). This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas" ("end-cross-member-load-transfer areas"). Country of registration / Signage Warning sign according to ECE - 70, approval according to ADR according to 9.1.1.2 of the ADR, EX/II, EX/III, / registration certificate for vehicles for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for sub

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22701003408, empty load weight: 4,800 kg, maximum load weight: 22,200 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 01/2015, next inspection (TÜV): 02/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Year of construction: 2014, Attention: The images shown are archive photos! The vehicle may still be in use! Weights and Dimensions: Gross weight: 27,000 kg Payload approx.: 22,200 kg Aggregate load: 16,000 kg Stated fifth wheel load: 11,000 kg Unladen weight approx.: 4,800 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm Kingpin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Skeletal trailer for freight forwarding Fine grain steel welded construction, fifth wheel plate with replaceable 2" kingpin 13 pairs of lashing rings recessed in the outer frame, each rated at 2.5 t Outer frame features "Load Lock Profile" for attaching lashing straps 24 t two-speed landing gear, single-sided operation, with straight lower section, without compensator Wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection Quarter fender mudguards Axles & Suspension 1st axle: SAF drum brake, 2nd axle: BPW drum brake Air suspension Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connection cable Note: This trailer may only be towed by tractors that ensure the effectiveness of the ABS! With lift & lower valve Vehicle Stability Control System Wheels and Tyres 385/55 R19.5, manufacturer at OEM's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side mounted yellow LED lighting set as far in-board as possible 2 white marker lights at the front 2 white/red lane position lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable Floor Phenolic resin-coated plywood approx. 30 mm thick, cross-joints with Omega inlay, on longitudinal bearers for high point load capacity for forklift axle weight up to max. 7,100 kg Note: Floor deformation due to weather influences possible! Front Bulkhead/Corner Posts Bulkhead height: 1,200 mm, corner posts made of steel in volume design, with "viewing windows" Approval / Signs Country of registration: Germany Rsdjy Sk U Aopfx Ag Uju With DEKRA inspection and report 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE-70 Contour marking with reflective strips in accordance with ECE R 048, white on the sides, red at the rear Painting Frame: RAL 3002 Carmine Red Landing legs: black coated Front bulkhead: RAL 3002 Carmine Red Attention: The images shown are archive photos! The vehicle may still be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22702011668, empty load weight: 4,800 kg, maximum load weight: 22,200 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 10/2013, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Year of construction: 2013, Attention, the images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Gross weight: 27,000 kg Payload approx.: 22,200 kg Aggregate weight: 16,000 kg Stated fifth wheel load: 11,000 kg Tare weight approx.: 4,800 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Coupling height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis - Semitrailer for Forwarding High-tensile steel welded construction, fifth wheel plate with replaceable 2" king pin 13 pairs of lashing rings recessed into the outer frame, each with a 2.5-ton capacity Outer frame with "Load-Lock profile" for lashing strap attachment 24-ton twin-speed landing gear, single-sided operation, straight lower part, without compensating link Wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, galvanized steel Quarter-shell mudguards Axles & Suspension BPW disc brake axles Air suspension Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable couplings at the front, without connecting line EBS, Electronic Brake System with EBS socket at front, no connecting cable Caution: This trailer may only be towed by towing vehicles that ensure effective ABS operation! Rodpjy Sk Szjfx Ag Uou With lift/lower valve Vehicle stability control system Wheels and Tyres 385/55 R19.5" make at manufacturer's discretion Steel rims, factory silver Electrics 24 volt, multi-chamber tail lights Side yellow LED lighting as deeply recessed as possible 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cables Floor Anti-slip phenolic plywood, approx. 30 mm thick, cross joints with Omega inserts, on longitudinal supports for high point load resistance (for forklift axle load up to max. 7,100 kg) Note: Floor warping due to weather influences possible! Front Bulkhead / Corner Stakes 25 mm aluminium hollow profile, approx. 1,200 mm high, steel corner stakes in volume design, with 2 "inspection windows" Approval / Signs Country of Registration: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE-70 Contour marking with reflective tape in accordance with ECE R 048, white on sides, red at rear Paintwork Frame: RAL 3002 carmine red Landing gear: Black coated Front wall: RAL 3002 carmine red Attention, the images shown are archive photos! The vehicle may currently be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22701003406, empty load weight: 4,800 kg, maximum load weight: 22,200 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 10/2013, next inspection (TÜV): 01/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Year of construction: 2013, Attention: The images are archive photos! The vehicle may currently be in use! Weights and Dimensions: Gross vehicle weight: 27,000 kg Payload approx.: 22,200 kg Axle load: 16,000 kg Stated fifth wheel load: 11,000 kg Unladen weight approx.: 4,800 kg +/- build tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer Forwarder Fine-grain steel welded construction, mounting plate with replaceable 2" king pin 13 pairs of lashing rings recessed in outer frame, each rated 2.5 t Outer frame with “Load-Lock profile” for securing straps 24 t two-speed landing gear, single side operation, with flat base plate, without compensating slide Chocks with holder Aluminum side underrun protection Steel rear underrun protection Quarter-shell mudguards Document box on front wall, left-hand side (mounted slightly sloped) Axles & Suspension BPW disc brake axles Air suspension Braking System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, no connecting line EBS, Electronic Braking System, with EBS socket at front, without connecting cable Attention: The trailer may only be towed by tractor units equipped with functional ABS! With lift and lower valve Vehicle Stability Control System Wheels and Tyres 385/55 R19.5” – make at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt; multicompartment rear lights (3 sets of older Hella lights still available at plant for optional installation); lateral yellow LED markers recessed as far as possible 2 white front position lamps, each protected by 12 mm round bar welded over the top 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cables Rodjy Sk Rqepfx Ag Usu Floor Approximately 30 mm phenolic plywood, cross joints with Omega insert, laid on longitudinal supports for high point-load capacity, suitable for forklift axle load up to max. 7,100 kg Note: Floor warping due to weather exposure possible! Front bulkhead / Corner posts Approx. 1,200 mm high, corner posts made of volumetric steel Approval / Plates Country of registration: Germany With Dekra inspection and report 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE-70 Contour marking with reflective strips in accordance with ECE R 048, white (sides) and red (rear) Paintwork Chassis: RAL 3002 carmine red Landing legs: Black coated Front bulkhead: RAL 3002 carmine red Attention: The images are archive photos! The vehicle may currently be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22702018968, empty load weight: 4,000 kg, maximum load weight: 23,000 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 02/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Year of construction: 2016, The images shown are archive photos! The vehicle may currently be in use! 2-axle flatbed semi-trailer Type SZS 270 Mega RH 95 Weights and Dimensions: Perm. / technical gross weight: 27,000 kg Perm. / technical payload approx.: 23,000 kg Perm. / technical axle load: 16,000 kg Perm. / technical fifth wheel load: 11,000 kg Unladen weight approx.: 4,000 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Maximum overall width: 2,550 mm Overall height approx.: 2,220 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation measurement approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Vehicle consists of: Chassis: Spedition semi-trailer frame Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame with "Load-Lock profile" for lashing strap attachment, note: to attach straps when side walls are fitted, the side walls must be opened! 14 pairs of lashing rings, each rated to 2.5 t 24-t, 2-speed landing gear, operated from one side, with straight base, without equalizer Without support legs Wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards Axles & Suspension: SAF disc brake axles Air suspension Braking system: 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket front, without connection cable Attention: The trailer may only be towed by tractors capable of ensuring the ABS functions correctly! With raise & lower valve Vehicle stability system Wheels and Tyres: 385/55 R19.5” – make according to manufacturer’s choice Steel rims, factory silver Electrics: 24 Volt, multi-chamber tail lights, amber LED side marker lamps 2 white position lights at the front with protective bar 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at front, without connection cable Floor: Anti-slip phenolic plywood floor approx. 30 mm thick, cross joints with Omega insert, on longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Note: Floor warping due to weather influences possible! Front bulkhead/corner posts: 25 mm aluminium hollow profile, approx. 1,350 mm high, corner posts made of steel, high volume design, with “holes” for forklift drivers Approval / Markings: Germany Rsdoy Rxmwopfx Ag Ueu With Dekra inspection and certificate 24/7 service hotline Prepared for one-line license plate holder Warning sign according to ECE-70 Conspicuity markings with reflective tape according to ECE R 048; side in white, rear in red Painting: Frame: RAL 3002 carmine red Landing gear: Black coated The images shown are archive photos! The vehicle may currently be in use!

Condition: new, machine/vehicle number: eca976917d325d4adc41b69e8, empty load weight: 7,200 kg, maximum load weight: 27,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r 22,5, Further information Chassis semitrailer forwarding Fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2 king pins, main frame reinforcement for 25 tons in the centre of gravity on 3 m loading length when pushed together. 13 pairs of hooks for lashing strap attachment welded onto the cross members 23 pairs of lashing eyes embedded in the outer frame, 3.5 tons each Redei Ri Szepfx Ag Uou Outer frame with Load-Lock profile for lashing strap attachment Please note! Cannot be used with drop sides! 24 t. 2-speed support winch in reinforced design for loaded trailer, single-sided operation, with semicircular lower section and straight connecting plate, with thrust compensation Wheel chocks with holder Aluminum side bumper Underride guard Half-shell mudguards with anti-spray flaps according to EG 1 spare wheel holder for 1 electric wheel, with wheel mounting kit 1 closed stanchion stowage box, open at the top, below loading area, doors on both sides, w=450 mm/H=400/420 mm/t=2460 mm 6 pairs of extendable stanchion pockets, for 80x80 mm tubular stanchions, extendable from loading width 2000 mm to 3100 mm 4 pairs of stanchion pockets embedded in the outer frame, for 80x80 mm shaped tubes 11 stake pockets centrally recessed in the floor, for 80x80 mm shaped tubes, with reinforcement beam, each installed between the outer stake pockets 5 x 3 pairs of stanchion pockets recessed on the outside of the longitudinal beams, for 80x80 mm shaped pipes, including reinforcement beams - for securing loads to the front and rear when transporting 2x5000 mm or 2x 6000 mm construction steel mats 6 lightweight stanchions W=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, top with cable guide for belt tensioning 12 lightweight stanchions W=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded to the bottom on both sides Note: stanchion pockets / stanchions are not designed for securing long materials, pipes etc. on their own without looping around them 2 plastic toolboxes, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 6 construction steel winches with wire rope and counter hooks, with rope feed-through through the outer frame, 1 removable slip-on gear for construction steel winches - supplied loose (without bracket on the frame) Telescoping Main frame can be telescoped Extendable by max. 4,000 mm and can be arranged approx. every 500 mm Locking with pneumatic bolt locking + display Frame locking on both sides, actuation via hand knob, operation for brake/locking and suspension in FR-left in front of the axles Storage compartment between the side members when extended Axles + suspension SAF disc brake axles with 430 mm disc diameter Last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button, as well as manually via switch in the towing vehicle (pin 10), without truck installation. Offset axle spacing mm Air suspension 1st axle automatic lift axle, can also be operated electrically from the truck, with starting aid, without truck installation (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake system Colored cable routing for easy servicing Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS make of the manufacturer's choice, electronic brake syst

Condition: new, machine/vehicle number: 8e6cf81e11b107f23f22f209a, axle configuration: 3 axles, tire size: 435/50 r19.5, Further information Fine-grained steel welded construction, with preload slight pretension in the neck area, saddle plate with replaceable 2 , kingpin, outer frame slightly inclined new design with Load-Lock profile for tensioning strap attachment, 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Note: Free support leg corner dimension or free swing-through radius to the rear approx. 1930 mm, pull-out ladder at the rear, lateral door stop, 2 wheel chocks with holder, aluminium side collision protection, galvanized steel underride guard, quarter-shell mudguards in front of 1st axle and behind each axle, with anti-spray flaps according to EC, impact protection at the rear SAF disc brake axles, laser-measured axle/chassis to reduce tire wear and fuel consumption, air suspension 2-line compressed air brake system, colored cable routing for easy servicing, spring-loaded parking brake, 2 swap-proof coupling heads at the front, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS, with lift & lower valve, vehicle stability system 435/50 R19.5 tires of the manufacturer's choice, steel rims, factory silver 24 volt, multi-chamber lights, amber LED lighting at the sides, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 2 x 7-pin interchangeable sockets at the front, without connecting cable Floor: Screen printing plates approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front bulkhead / corner stanchions: 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, crash blocker, bottom inside at approx. 140 mm height with steel impact protection Center stanchions: 3 pairs of sliding stanchions can be moved along the entire length, with 4 insertion pockets and a long pocket at the bottom, 3 pairs of stanchion positions Insertion slats: 5 rows of wooden insertion slats Rear wall / rear corner stanchions: Rear steel corner stanchions up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal espagnolette locks each Redpfsi Ri E Hsx Ag Ueu Tarpaulin: Tarpaulin with welded-in horizontal and vertical straps, stainless steel tensioning fasteners Roof: Sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-shaped roof rail for car industry, internal width between the roof rails, approx. 2 490 mm, tarpaulin color: white, 400 Roof non-elastic, hardly any deflection of the roof rail when loading and unloading, optimum rain strip at the rear, at the top of the end bows, above the doors, EcoLift - lifting roof can be raised by approx. 380 mm, with gas pressure damper support, 3 driving positions at the front: interior height at the front approx. 2900 mm/ 2950 mm / 3000 mm, adjusted to approx. 3000 mm Germany, test approval according to EC 2007/46, 24/7 service hotline, Fliegl manufacturer's certificate for structural strength according to EN 12642 XL, prepared for single-line license plate holder, warning sign according to ECE - 70, reflective strips: white, continuous on the side tarpaulin at the bottom and at the top in the corners (if visible drop sides, then the strip at the bottom, on

Condition: used, maximum load weight: 28,933 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2015, loading space length: 13,620 mm, loading space width: 2,490 mm, loading space height: 3,000 mm, loading space volume: 101 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Edscha sliding roof * Haldex EBS, ABS, LSV * Lift axle * Toolbox Redpfx Agevhvcfo Uou * BPW Eco Plus axles with disc brakes ----* Tire size: 385/55R19.5 * Total length: 13,850 mm * Unladen weight: 6,067 kg * TÜV & SP: expired -----Subject to errors & prior sale Vehicle number 5726 WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902028370, empty load weight: 6,015 kg, maximum load weight: 28,985 kg, overall weight: 35,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2021, next inspection (TÜV): 10/2026, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,030 mm, suspension: air, tire size: 435/50 R19,5", color: black, Year of construction: 2021, Equipment: EBS, Chassis Semi-Trailer for Haulage Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly sloped with "Load-Lock profile" for lashing strap attachment; if equipped, note: to hook in straps when side boards are mounted, the boards must be opened! 24 t two-speed landing gear, single-side operation, with straight lower part, without compensating slide Note: Free landing leg corner spacing or free rear swing radius approx. 1930 mm without landing legs, pull-out ladder at the rear, door holder on the side 2x wheel chocks with holder Aluminium side underrun protection Galvanized steel rear underrun protection Quarter-shell mudguards before the 1st axle and behind each axle With anti-splash mudflaps behind each axle Rear impact guard, double-sided pallet stop approx. 15-20 mm high, bolted design; loading height reduced by approx. 15-20 mm Plastic toolbox with drawer and insert shelf, w=650 / h=520 / d=670 mm, lockable with padlock (padlock not included) Axles & Suspension SAF disc brake axles Axle/chassis laser alignment for reduced tire wear and fuel consumption, air suspension, no lift axle Braking System 2-line compressed air brake system, colour-coded line routing for easy service Spring-loaded parking brake 2 unmistakably keyed coupling heads at front, no connection line EBS, Electronic Braking System with EBS socket at front, no connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the ABS is effective! With raise & lower valve Vehicle stability control system Wheels and Tyres 435/50 R19.5” make according to manufacturer’s choice, alternatively 385/55 R19.5 Steel rims, factory silver Electrics 24 Volt, multi-chamber lamps, yellow LED side marker illumination 2 white position lights front 2 white/red lane marker lights rear 2 x 7-pin and 1 x 15-pin unmistakably keyed sockets at front, no connecting cables Floor Birch plywood panels approx. 30 mm thick, laid on longitudinal crossbars, high point load bearing capacity for forklift axle load up to max. 7100 kg Body Body mounted Front Bulkhead / Corner Posts 2,580 mm high, steel corner posts, high-volume design, mechanism for side curtain release at front wall "Crash Blocker", lower inside approx. 140 mm high steel impact protection Intermediate Posts 3 pairs of sliding posts, adjustable along full length, with four multipocket sockets and long socket at bottom Rsdpfsx Sqmrex Ag Uju 3 pairs of post positions Insert Slats 5 rows of wooden insert slats Rear Wall / Rear Corner Posts Rear steel corner posts up to lower edge of roof, curtain attachment with round tube and tensioning ratchet Rear portal doors, double-winged, each with 2 internal rod locks Curtain Curtain with welded horizontal and vertical belts Tension locks of stainless steel Roof Sliding roof, rear lift-up, can be slid from rear to front, L-roof rail for automotive industry, interior width between roof rails approx. 2,490 mm, curtain colour: white Roof non-elastic, minimal deflection of roof rail during loading and unloading EcoLift - roof can be raised by approx. 380 mm on both sides, gas strut assisted, 3 driving positions at front: internal height front approx. 2900 mm/2950 mm/3000 mm, set to approx. 3000 mm Optimized rain gutter at rear, top of rear hoop, above doors

Condition: used, machine/vehicle number: WFDFLT23861001990, empty load weight: 4,900 kg, maximum load weight: 33,100 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total length: 9,800 mm, total width: 2,550 mm, tire size: 265/70 r19,5, color: red, Further information Former exhibition vehicle from 2006 - was used internally and therefore shows signs of use! Side collision protection: Aluminum, from kingpin to start of side collision protection 2 600 mm Underride guard: Frame color and flush with end of chassis as far inwards as possible Wheel chocks: 2 pieces with bracket Bumpers: 2 steel bumpers Paint: Sandblasted substrate, 2-component acrylic paint Wheel rims: Factory silver Approval: with Dekra approval Rodpfxsi Ri Hys Ag Uou

Condition: new, machine/vehicle number: 0fe2184cda24503447c582a1e, empty load weight: 3 kg, maximum load weight: 34 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/55 r 22,5, Further information Chassis semi-trailer container Fine-grained steel welded construction, saddle plate with replaceable 2 kingpins Container mounts:1 x 40 feet with gooseneck tunnel The transportation of filled tank containers is excluded. Without rear height adjustment and without folding center supports, no transport of containers without tunnel possible. Container guide front plug-in 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Half-shell mudguards with anti-spray flaps according to EG Impact protection at the rear Axles+suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/55 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, rear and brake lights in LED, amber LED lighting on the side (Note! with certain towing vehicles, misdiagnosis may occur although the function is given) 2 white position lights at the front 2 white/red rear lane departure lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (switched via reversing light) Additional LED work light(s) at the rear, switched via reversing light Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Special approval required if the overall length of the train exceeds 16,500 mm. Attention: Transport of filled tank containers is excluded! Country of approval / plates Redpfx Agsi Ri Ayj Ueu Germany with Dekra approval and expert opinion (according to §13 EG - FGV) Prepared for single-line license plate holder Warning sign according to ECE - 70 Contour markings with reflective strips to ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray10-year warranty against rusting through Support legs coated black Without pallet box Paint Attention: Archive pictures!

Condition: new, machine/vehicle number: 3703d600260244d5f159f51e4, empty load weight: 4 kg, maximum load weight: 33 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Further information Chassis Saddle Container Welded fine-grained steel construction, saddle plate with interchangeable 2 kingpins and 2 kingpin positions Container mounts: Incl. Rear extension retracted: 1 x 20 feet flush with the rear, attention low fifth wheel load Rear extension extended 1st stage: 1 x 30 feet, 2 x 20 feet, 1 x 40 feet with gooseneck tunnel Rear extension extended 2nd stage: 1 x 45 feet with gooseneck tunnel and overloaded to the rear without rear height adjustment and without folding center supports, no transport of containers without tunnel possible. Plug-in adapter for front locking, for locking the containers without tunnel from below, with holder when not in use Rear extension mounted on rollers, with hand crank 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Extendable underride guard for 45 foot containers Half-shell mudguards Incl. with anti-spray flaps according to EG Impact protection at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake system Colored line routing for easy service. 200 spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/55 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, rear and brake lights in LED, amber LED lighting on the side (Note! with certain towing vehicles, misdiagnoses can occur even though the function is is given) 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Operating instructions Attention: Transport of filled tank containers is excluded! When transporting 45 containers with a short tunnel, with or without front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total train length of 16500 mm is exceeded! The underride guard must be extended manually! A special permit in accordance with § 70 StVZo is required! Country of registration / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Rjdei Ri Eqopfx Ag Usu 390 Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Support legs coated black Attention: Archive pictures!

Condition: new, machine/vehicle number: d73a4869e108da5fdd6e55526, empty load weight: 4 kg, maximum load weight: 33 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Further information Chassis Saddle Container Welded fine-grained steel construction, saddle plate with interchangeable 2 kingpins and 2 kingpin positions Container mountings: Rear extension retracted: 1 x 20 feet or 1 x 30 feet Rear flush Center telescope 1st stage, rear extension extended 1st stage: 2 x 20 feet or 1 x 40 feet with and without gooseneck tunnel Center telescope 2nd stage, rear extension extended 2nd stage Rsdpfx Agji Ri E Ao Ueu 1 x 45 feet with gooseneck tunnel and overloaded to the rear Center telescope 2nd stage, front extension extended 1st stage Rear extension extended 2nd stage 1 x 45 feet with long gooseneck tunnel and chamfered corners Center telescope as an interlocking central tubular frame with bolt lock without height adjustment at the rear and without folding center supports, no transport of containers without tunnel possible. 2 container guides, incl. connection plate for electrical, air and brake connections (connections positioned upwards) Plug-in adapter for front locking, for locking the containers without tunnel from below, with holder when not in use Front extension mounted on castors, can be pulled out manually (for 45 containers with long tunnel) Rear extension mounted on rollers, with hand crank 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Extendable underride guard for 45 foot containers Half-shell mudguards with anti-spray flaps according to EG Impact protection at the rear Axles+suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/55 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, 4 x 3 chamber lights + 1 round reversing light and + 1 round rear fog light, amber LED lighting at the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Operating instructions When transporting 45 containers with a short tunnel, with or without front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total train length of 16500 mm is exceeded! The underride guard must be extended manually! A special permit in accordance with § 70 StVZo is required! Approval / plates Germany Test approval according to EG 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning sign according