Used Fliegl 3-Achs Jumbo Gardinen Sattelauflieger for sale (78,164)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33901013883, empty load weight: 8,840 kg, maximum load weight: 30,160 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2025, next inspection (TÜV): 05/2027, loading space length: 13,650 mm, loading space height: 2,890 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 235/75 R17,5", color: blue, 3 vehicles in production Please note: the images are archive photos. The vehicle may be in use. #Chassis – Semi-Trailer for Haulage - Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin - Outer frame with "Load Lock" profile for lashing straps - 13 additional pairs of lashing rings recessed into outer frame, 5 t each - 24 t 2-speed landing legs, single-side operation, half-round foot, straight mounting plate, sliding foot compensation, min. swivel clearance 2,220 mm - "Heavy Blocker 2.0" rear cross impact protection - Heavy-duty pallet stop, bolted both sides, ca. 15–20 mm high, lashing points ca. every 380 mm - Lifting table to gooseneck, ca. 3,000 mm long, hydraulically raised for driving onto gooseneck - Hydraulic lifting table with own electric power pack, in aluminium box with stainless steel door, right side (direction of travel) - 2 x 12V batteries with bracket and battery box, charging cable front to rear, 7-pin charging socket at front #Axles & Suspension - Laser-measured axles/chassis, reducing tyre wear and fuel consumption - Rear axle self-steering, automatic reverse lock via reversing light, additional manual lock switch on vehicle - Air suspension with raise & lower valve plus auto-reset function - Max. rear ramp/loading height with air suspension lowered ca. 1,050 mm #Wheels & Tyres - 235/75 R 17.5", steel wheels in twin arrangement #Braking System - 2-line compressed air braking system - Spring-loaded parking brake - Vehicle stability system - Trailer info centre, displays data such as axle load and mileage - Axle load detection via EBS CAN-bus signal, shown on cab display - 2 mismatch-proof coupling heads at front - EBS electronic braking system with EBS socket at front - Tyre pressure monitoring system (TPMS) per ECE R 141, shown on tractor display via EBS #Electrics - 24V, LED multi-chamber lights, flashing side lights - 2 white LED position lights at front - 2 white/red LED outline marker lights at rear - 2 additional LED work lights at rear - LED work lights on both sides - 2 x 7-pin and 1 x 15-pin mismatch-proof sockets at front Kjdpfx Ahoz Ahxds Eodt #Front Wall / Front Corner Posts - Front wall lined internally to ca. 2,500 mm height, ca. 30 mm thick plywood panel #Centre Posts - 3 pairs of sliding posts, adjustable along full length, 4 insertion pockets, long pocket at bottom - 3 pairs of post positions #Slats - 5 rows of wooden slats - 4 pairs of variable steel slats, combined with variable beams for front/rear load securing; slats omitted where steel slats fitted, at rear in the well - 4 variable beams, only combined with variable steel slats, for front/rear load securing #Roof - Fliegl-Blitz-Verdeck - Sliding roof, rear end-lift folds up, roof slides rear to front, L-shaped roof rail for automotive industry, internal width between roof rails ca. 2,490 mm - EcoLift – roof lifting mechanism, raised ca. 380 mm, both sides, gas strut support #Registration Country / Plates - With DEKRA inspection and certificate (per §13 EC-FGV) - Fliegl manufacturer's certificate for body strength per EN 12642 XL - Fliegl manufacturer's certificate for body strength per DL 9.5, pallet stop both sides, ca. 20 mm high, loading height reduced by ca. 20 mm - Warning panel per ECE-70

Condition: used, axle configuration: 3 axles, first registration: 06/2024, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, Daily registration in 06/2024 due to the new TPMS regulation Chassis Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly slanted with "Load-Lock profile" for tensioning belt attachment 24 ton. 2-speed support winch, one-side operation Side impact protection aluminum Underrun protection galvanized steel Quarter-shell fenders in front of and behind axle unit with anti-spray splash flaps according to EC Ram protection at the rear Spare wheel holder for 1 electric bike, with wheel mounting kit Axles + suspension SAF disc brake axles with 430 mm disc diameter "Laser-measured axle/chassis" Reduction in tire wear incl. and fuel consumption 1st axle automatic lift axle, can also be operated electrically from the truck including forced lowering and starting aid, without truck installation Brake system 2-line compressed air Brake system Spring-loaded parking brake EBS made by Wabco, electronic braking system with EBS socket at the front, without connecting cable with lifting & lowering valve + auto-reset function Vehicle - driving stability system Axle load detection via EBS-Canbus signal, for display on display Wheels and tires 385/65 R22.5" / 6 steel rims, factory silver Electrics 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red lane keeping lights at the rear 2 x 7-pin and 1 x 15-pin, non-interchangeable sockets at the front, without connecting cable 2 additional LED work lights, at the rear, switched via reversing light Floor Screen-printed panels approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front wall Plug-in slats 5 Rows of aluminum V-slats Kodperi Hihsfx Ah Eedt 2 pairs of Vario steel slats, in conjunction with Vario beams for securing loads at the front and rear, then no need for slats in the area of the steel slats Rear portal doors, 2-winged, each with 2 internal espagnolette locks Tarpaulin, with welded-in horizontal and vertical straps Empty weight: 5,960kg Offer and images subject to change

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014200, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space height: 900 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,500 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: grey-black, Chassis, Semi-trailer, Logistics Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin Outer frame slightly angled, new design with "Load-Lock profile" for securing lashing straps 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without lateral support Free support leg angle or free swivel radius to the rear, approx. 1920 mm 2 support wedges with holder Aluminum side impact protection Steel underrun protection Partial wheel covers in front of and behind each axle Splash flaps in front of the 1st axle and behind each axle with anti-splash protection, according to EC regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Axles + Suspension SAF drum brake axles "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist function, activated by "3x braking" (starting assist function is operational up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended ride height, therefore no guarantee for tire damage Braking System 2-line compressed air brake system Kdodpfx Aheza A Txs Ejt Color-coded line routing for easy maintenance Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving Stability System Wheels and Tires 235/75 R17.5, brand according to the manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5,600 kg Front wall / corner posts 25 mm aluminum hollow profile, 1,350 mm high, corner posts made of steel in a full-volume design Country of Approval / Signage Germany With DEKRA inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau Front corner posts: hot-dip galvanized Front wall: aluminum

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33903000364, empty load weight: 6,120 kg, maximum load weight: 28,880 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2022, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,800 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: silver, Please note: The images are archive photos! The vehicle may still be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 28,880 / 32,880 kg Permissible/technical aggregate load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 6,120 kg +/- manufacturing tolerance Overall length approx.: 13,800 mm Maximum overall width: 2,550 mm Overall height approx.: 2,388 mm Gooseneck length approx.: 4,050 mm Low bed length approx.: 9,600 mm Loaded loading height in the low bed approx.: 900 mm Internal width approx.: 2,480 mm Coupling height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer Forwarder Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin Telescoping front low bed extendable by approx. 1,500 mm, lockable every 500 mm Slightly inclined outer frame, new design with 'Load-Lock profile' for attaching lashing straps 'Patented Load-Lock-Cross' for lashing straps integrated in the cross member under the outer frame 24 t, 2-speed landing gear, single-sided operation, with straight lower part, without compensating support Free landing gear corner dimension and rear swing clearance approx. 1,920 mm Aluminum side underrun protection Steel rear underrun protection Quarter-shell mudguards 9 pairs of lashing/rack rails transverse in the floor, embedded up to the main frame, approx. 100 mm high. With 20 mm round steel rails, top and bottom, distance between upper and lower rails approx. 60 mm (of the round steel). Bottom has angle plate, half open downward. For lashing and inserting stakes 80 x 80 mm (3 pairs in the neck, 6 pairs in the low bed section). 3 pairs of stake pockets recessed in the outer frame, approx. 72 x 42 mm internal dimension Axles & Suspension Drum brake axles according to manufacturer specification 'Axle/chassis laser-aligned' – reduces tire wear and fuel consumption Air suspension Brake System 2-line compressed air braking system Color-coded lines for easy service Spring-loaded parking brake 2 error-proof coupling heads at front, without connecting line EBS, Electronic Braking System with EBS socket at front, without connection cable Note: The trailer may only be towed by tractors with functional ABS! With raise & lower valve Vehicle driving stability system Wheels and Tires 235/75 R17.5, manufacturer at discretion Steel rims, factory silver Electrical System 24V, multi-chamber lights, side-mounted yellow LED lighting (recessed) 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin error-proof sockets at front, without connecting cable 1 additional LED work light at rear, operated via reverse light Floor Anti-slip phenolic plywood panels, approx. 30 mm thick, high point load capacity, suitable for forklift axle loads up to max. 5,600 kg Front wall / Corner stakes front 25 mm aluminum hollow profile, 1,350 mm high Country of registration / license plates Germany Inspection and certification in Bosnia 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides, red at rear Warning sign according to ECE - 70 Kdjdoy Slhqepfx Ah Eot Paintwork Frame: Hot-dip galvanized including passivation '15-year warranty against rust-through' Front corner stakes: Hot-dip galvanized Front wall: Aluminum

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902024288, empty load weight: 6,075 kg, maximum load weight: 32,925 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2019, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 50 %, color: blue, - Archive photos – the vehicle shown may differ and may already be in use. # Chassis – Haulage Semi-Trailer - Fine-grain steel welded construction, fifth-wheel plate with replaceable 2" kingpin - Outer frame slightly angled, with "Load-Lock-Profil" for lashing strap attachment. Note: to hook straps in together with side boards, the boards must be opened. - 24 t 2-speed landing legs, single-side operation, straight foot, without shift compensation - Pull-out ladder at the rear - Side door retainer - 2x wheel chocks with holder - Attention! Chassis No. 2024286–89 only: pallet box for 30 Euro-pallets (ground clearance approx. 220 mm) - Galvanised steel underrun protection Kodpfx Ahjy Dfprj Esdt - Quarter-shell mudguards, front and rear of axle assembly - Anti-spray mudflaps to EC regulations - Rear impact protection - Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with one padlock (lock not included) # Axles & Suspension - SAF axles - Laser-aligned axles/running gear, reducing tyre wear and fuel consumption - Air suspension - 1st axle: automatic lifting axle, incl. forced lowering and start-up aid, activated by pressing the brake pedal 3 times (start-up aid functions up to an axle load overrun of 30% and up to a maximum speed of 25 km/h) # Braking System - 2-line air braking system, colour-coded pipework for easy servicing - Spring-actuated parking brake - 2 anti-mismatch coupling heads at the front, without connecting hose - EBS electronic braking system with EBS socket at the front, without connecting cable - Attention: this trailer may only be towed by tractor units that ensure the effectiveness of the ABS! - With lift-and-lower valve - Vehicle stability system # Wheels & Tyres - 385/65 R22.5", make at manufacturer's discretion - Steel rims, factory silver # Electrics - 24V multi-chamber lamps, yellow LED marker lights on the sides - 2 white front position lamps - 2 white/red rear outline marker lamps - 2x 7-pin and 1x 15-pin anti-mismatch sockets at the front, without connecting cable # Front Wall / Front Corner Posts - 580 mm high steel corner posts in lightweight (volume) design, release mechanism for side curtain at front wall - "Crash-Blocker" – steel impact protection on lower inside, approx. 140 mm high # Centre Posts - 3 pairs of sliding posts, adjustable along entire length, with 4 insertion pockets each and a long pocket at the bottom - 3 pairs of post positions # Rear Wall / Rear Corner Posts - Rear corner posts, steel, up to roof lower edge, curtain attachment with round tube and tensioning ratchet - Rear barn doors, 2-leaf, each with 2 internal rod locks # Curtain (Tarpaulin) - Curtain with welded-in horizontal and vertical straps - Tensioning buckles in stainless steel # Roof - Sliding roof, rear end bow foldable, roof slidable from rear to front, curtain colour: white - Optimised rain gutter at the rear, on top of the end bow, above the doors # Operating Notes - When forming a combination, the legally permitted overall vehicle height must be observed! Should the overall height exceed 4,000 mm, please note the following: the haulier is liable for any resulting damage; the person delivering the vehicle must obtain their own permit under § 29 StVO; we accept no liability for the delivery of the vehicle.

Condition: used, machine/vehicle number: WFDFLT33502021621, empty load weight: 5,897 kg, maximum load weight: 29,103 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2017, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R19,5", color: green, Please note: The images shown are archive photos. The vehicle may still be in operation. #Chassis Fifth wheel with replaceable 2" kingpin Slightly angled outer frame with integrated Load-Lock profile for securing lashing straps 24-tonne two-speed landing gear with single-side operation, straight foot design, without load compensation Retractable rear access ladder Side door retainers 2 wheel chocks with holders Aluminium side underrun protection Pallet storage box for 8 Euro pallets, mounted in front of the axle assembly (black lid) Galvanised steel rear underrun protection Quarter-shell mudguards in front of the first axle and behind each axle Anti-spray mud flaps behind each axle Heavy Blocker rear impact protection with cross beam and side roller buffers Heavy-duty pallet stop on both sides (approx. 15–20 mm high) with lashing points every 200 mm (Loading height reduced by approx. 20 mm.) Lockable plastic toolbox with drawer and storage shelf: 650 × 520 × 670 mm #Axles & Suspension SAF disc brake axles Laser wheel alignment for reduced tyre wear and fuel consumption TIS – Tyre Inflate System (automatic tyre pressure monitoring and inflation system) Air suspension Without lift axle #Braking System Dual-line compressed air braking system Spring parking brake Two non-interchangeable air couplings at the front (without connecting hoses) Electronic Braking System (EBS) Front EBS socket Raise & lower valve Trailer Stability Control System #Wheels & Tyres 385/55 R19.5 tyres Manufacturer's choice Steel wheels, factory silver finish #Electrical System 24 V electrical system Multi-chamber rear lights Yellow LED side marker lights Two white LED front position lights Two red/white rear outline marker lights 2 × 7-pin and 1 × 15-pin front sockets #Floor Approx. 30 mm plywood floor Omega-reinforced transverse joints Longitudinal steel cross members Suitable for forklift axle loads up to approx. 7,100 kg #Front Wall & Front Corner Posts Front wall height: approx. 2,580 mm Steel corner posts Internal steel impact protection at approx. 140 mm height #Sliding Centre Posts pairs of full-length sliding posts Kdodpfx Ahezlcdgo Eet Four-way insert pockets Additional long lower pockets 3 selectable post positions #Side Slats Aluminium V-type insert slats #Rear Wall & Rear Corner Posts Steel rear corner posts extending to the underside of the roof Curtain tensioning with round tube and ratchet system Double rear portal doors with two internal locking bars per door #Curtain System Reinforced side curtains with welded horizontal and vertical straps Stainless steel curtain buckles Customer branding "Bring" on both side curtains and rear doors #Roof Sliding roof system opening from rear to front Rear end lift can be folded upwards L-shaped roof rails suitable for the automotive industry EcoLift lifting roof, adjustable by approx. 380 mm on both sides with gas strut assistance Optimised rear rain gutter integrated into the rear roof bow above the doors #Approval & Certifications Country of registration: Germany EC type approval according to Directive 2007/46/EC Manufacturer's body strength certificate according to EN 12642 XL *(valid only when equipped with four rows of aluminium slats)* Additional DL 9.5 certification Heavy-duty pallet stop on both sides, approx. 25 mm high ECE R70 rear warning plate Folding "A" warning plate for waste transport Rear night parking sign

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014232, empty load weight: 5,900 kg, maximum load weight: 29,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2025, loading space length: 13,650 mm, loading space height: 900 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,638 mm, suspension: air, tire size: 235/75 R17,5", color: silver, The images are archive images! The vehicle may be in use! Chassis: Semi-trailer for transport companies Fine-grain steel welded construction, kingpin plate with interchangeable 2" kingpin Suitable for transporting construction/agricultural machinery up to a maximum gross weight of 24,000 kg and with a maximum width of 2,480 mm (however, the track width of the construction/agricultural machinery or vehicles to be transported must not exceed 2,200 mm). Mounting rail for aluminum ramps at the rear (wider construction/agricultural machinery must not be loaded). Outer frame slightly angled, new design with "Load-Lock" profile for securing lashing straps. Kjdpfexb D Swjx Ah Eodt 14 pairs of lashing points recessed into the outer frame, 2.5 tons each. 6 pairs of lashing points recessed into the outer frame, 5 tons each. 24-ton, 2-speed support jacks, single-sided operation, with straight lower part, without thrust compensation. Free support foot angle or free swivel radius to the rear approx. 1920 mm. Foldable rear support. 2 x chock blocks with holder. Aluminum side impact protection. Steel underride protection. Quarter panel fenders in front of and behind each axle. With anti-splash flaps behind each axle. 1 x spare wheel holder for 1 spare wheel, with wheel fastening kit. 1 x spare wheel, same manufacturer as the standard tires, steel rim. Axles + Suspension SAF drum brake axles. "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption. Air suspension. 1st axle: automatic lift axle, additionally electrically operated from the truck, including forced lowering and start-up assist, without truck installation (the start-up assist is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h). Braking System 2-line compressed air braking system. Color-coded line routing for easy servicing. Spring-loaded parking brake. 2 fail-safe coupling heads at the front, without connecting line. 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lifting and lowering valve. Vehicle - Driving Stability System. "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the towing vehicle's display, via EBS, without truck installation (this requires the truck to have the necessary capabilities. Only for standard tires). Wheels and Tires 235/75 R17.5 twin tires. Steel rims, factory silver. Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. Yellow LED lighting on the sides linked to the turn signal ("flashing side marker lights"). 2 white position lights at the front in LED. 2 white/red outline lights at the rear. 2 x 7-pole fail-safe sockets at the front, without connecting cable. Floor Sieve plate, approx. 30 mm thick, for high point load capacity for forklift axle loads up to a maximum of 5,600 kg. Front Wall / Corner Posts 25 mm aluminum hollow profile, 1,350 mm high, corner posts made of steel in a robust design. Front wall additionally covered with sieve plate, 1250 mm high. Frame hot-dip galvanized. The images are archive images! The vehicle may be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33901011222, empty load weight: 5,741 kg, maximum load weight: 33,259 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2022, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 3,345 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 60 %, color: red, Gross/technical aggregate load: 24000 / 27000 kg Stated kingpin load perm./techn.: 11000 / 12000 kg Overall length approx.: 13850 mm Overall width max.: 2550 mm Overall height approx.: 3345 mm Platform length approx.: 13650 mm Platform width approx.: 2480 mm Fifth-wheel height approx.: 950 mm Kingpin setting dimension approx.: 1680 mm Front corner dimension approx.: 2040 mm #Chassis - semi-trailer for haulage Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock-Profil" for lashing strap attachment (note: side boards must be opened to hook in the straps) "patentiertes Load-Lock-Cross" for lashing strap attachment, in the cross member beneath the outer frame 24 t 2-speed landing legs, single-side operation, straight foot, without shock absorber (rear swivel clearance approx. 1930 mm) Pull-out ladder at the rear 2 wheel chocks with holder Side underrun protection, aluminium Kdodpfx Ahjzv Sq Re Eet Pallet box for 8 Euro pallets Front underrun protection, galvanised steel Quarter-shell mudguards ahead of axle 1 and behind each axle, with anti-spray flaps behind each axle 2 plastic tool boxes Container locks, 4 pairs recessed in the floor for 2 x 20 ft containers, distance between locks approx. 600 mm total, retractable type, without adapter, extendable to locking dimensions of 2760 mm and 2820 mm 2 rows of lashing/stake rails along the longitudinal beams, recessed centrally in the floor 7 lashing/stake rails transverse, recessed in the floor across the full width to the outer frame #Axles & Suspension SAF disc brake axles Laser-aligned axles/chassis to reduce tyre wear and fuel consumption Air suspension #Braking System Two-line air braking system, colour-coded pipework for easy servicing Spring-actuated parking brake 2 mismatch-proof coupling heads at the front EBS electronic braking system with EBS socket at the front Lift-and-lower valve Vehicle stability system #Electrics 24V multi-chamber lights, yellow LED side marker lights 2 x 7-pin mismatch-proof sockets at the front 2 additional LED work lamps 2 pairs of warning boards, double LED-illuminated, extendable to 3000 mm #Floor Phenolic-faced plywood flooring approx. 30 mm thick, on longitudinal sub-beams for high point load capacity, forklift axle load up to max. 7100 kg #Headboard / Front Corner Posts Hangler steel headboard approx. 2600 mm high, additionally lined inside with phenolic-faced plywood over the full height #Paintwork Frame hot-dip galvanised incl. passivation + outer frame top-coated in RAL 3000 fire red, 15-year warranty against corrosion perforation #Note The images are archive photos; the vehicle may currently be in use

Condition: used, empty load weight: 5,300 kg, maximum load weight: 12,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2010, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 52 m³, suspension: air, tire size: 235/75R17,5 ---/141J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/141J, rear tire size: 235/75R17,5 ---/141J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , --  Misprints, errors and changes reserved, Sample images --, More details at: !, More details: ! Kdjdpfx Aoz An A Neh Eot

Condition: used, empty load weight: 5,300 kg, maximum load weight: 12,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2010, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 52 m³, suspension: air, tire size: 235/75R17,5 ---/141J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/141J, rear tire size: 235/75R17,5 ---/141J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , --  Misprints, errors and changes reserved, Sample images --, More details at: !, More details: ! Kjdpez Azkmjfx Ah Ejdt

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902024321, empty load weight: 5,765 kg, maximum load weight: 29,235 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2018, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, color: black, The pictures are archive pictures, the vehicle may still be in use! Equipment on request! Kdodowk Dk Ispfx Ah Eet

Condition: used, empty load weight: 6,520 kg, maximum load weight: 23,480 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2019, loading space length: 8,610 mm, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length drop deck approx. 6.50 m, loading area length total approx. 8.60 m, loading height approx. 900 mm, , Vehicle is offered on behalf of a bank, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Kdjdpfx Asz Dhwmeh Ejt

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34002026850, empty load weight: 5,875 kg, maximum load weight: 33,125 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 75 %, color: silver, - Chassis: semi-trailer, general haulage - Fine-grain steel welded frame, fifth-wheel plate with replaceable 2" kingpin - Slightly tapered outer frame, new design, "Load-Lock-Profil" for strap lashing - 24t 2-speed landing legs, single-side operation, straight foot, no shift compensation - Note: rear corner clearance / swing radius approx. 1930 mm - Rear pull-out ladder - 2 side door retainers - 2 wheel chocks with holder - Aluminium side impact protection - Galvanised steel rear underrun protection - Quarter-shell mudguards front/rear of axle unit - EC anti-spray flaps on 3rd axle - Rear corner impact protection - 1 lockable plastic toolbox, 600x425x460 mm # Axles & Suspension - 3x BPW drum brake axles - Axle/chassis laser-aligned - lower tyre wear & fuel use - Air suspension - Axle 1: auto lift axle, forced lowering, traction assist via "3x brake pedal" (active up to 30% axle overload, max. 25 km/h) # Braking System - 2-line air brake system - Colour-coded lines for easy servicing - Spring-loaded parking brake - 2 mismatch-proof coupling heads, front, no hose - 24V EBS with front socket, no cable - Caution: tow only with tractor units ensuring ABS effectiveness! - Raise & lower valve - Vehicle stability system # Wheels & Tyres - 385/65 R22.5" - Steel wheels, factory silver Ksdpfx Ahjzzkrde Eodt # Electrics - 24V multi-chamber lamps, yellow LED side markers - 2 white LED front position lamps - 2 white/red outline marker lights, rear - 2x 7-pin mismatch-proof front sockets, no cable # Floor - Screen-printed plywood approx. 30 mm, longitudinal bearers, forklift axle load up to 7,100 kg # Front Wall / Front Corner Posts - 2,580 mm high, box-section steel corner posts, front curtain release, "Crash-Blocker", steel impact guard approx. 140 mm high, lower inside # Centre Posts - 3 pairs sliding posts, full-length adjustable, 4 insertion pockets + long bottom pocket (bottom pocket omitted with side boards) - 3 pairs of post positions # Insertion Slats - 5 rows of aluminium insertion slats # Rear Wall / Rear Corner Posts - Steel rear corner posts to roof edge, curtain fixing with round tube & tensioning ratchet - 2-leaf rear barn doors, each with 2 internal rod locks # Curtain - Curtain with welded-in horizontal/vertical straps - Stainless steel tensioning locks # Roof - Sliding roof, rear bow lifts up, curtain slides rear-to-front, L-section roof rail (automotive-grade), internal width approx. 2,490 mm, white curtain - Non-elastic roof, minimal roof rail deflection when loading - Optimised rain channel at rear, above doors on end bow # Operating Notes - When forming a combination, observe the legal max. overall vehicle height! - If overall height exceeds 4,000 mm, note the following: - The haulier is liable for any damage incurred. - The delivery driver must obtain their own permit under § 29 StVO - We accept no liability for vehicle delivery/transfer. # Country of Registration / Plates - Germany - DEKRA inspection & report (per §13 EC-FGV) - 24/7 service hotline - Fliegl body-strength certificate to EN 12642 XL (payload up to 27,000 kg) - Prepared for single-row plate holder - Warning plate per ECE-70 - Reflective strips: white, continuous along bottom of side curtains, top corners (with side boards fitted: strip at bottom, on boards) - Reflective strips: red, all around rear doors

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902027997, empty load weight: 6,832 kg, maximum load weight: 28,168 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2021, loading space length: 13,460 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, total length: 15,100 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, color: black, The pictures are archive images; the vehicle may still be in use! Kdodpfx Ahswk Dg No Ejt Optional equipment upon request.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031174, empty load weight: 5,835 kg, maximum load weight: 29,165 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2023, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,740 mm, suspension: air, tire size: 385/65 R22,5", color: grey, The images shown are archive photos. The vehicle may still be in use. Ksdsy Efcuopfx Ah Eodt Chassis Tipping Semi-Trailer Fine-grained steel welded construction in Basic lightweight design, fifth wheel plate with replaceable 2" king pin Curved front wall (patented) 24 t 2-speed support legs, single-sided operation, with straight base, without compensating rod 2x wheel chocks with holder Aluminium side underrun protection Rear under-run protection, foldable 6x half-shell mudguards Integrated mudguard holders with stone-repellent surface Tarpaulin rod with bracket 2x rear towing hooks Axles & Suspension BPW disc brake axles "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension 1st axle with automatic lift, including forced lowering and starting aid, operated by '3x brake' application Braking System 2-line compressed air braking system Colour-coded routing for easy servicing Spring-type parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS (Electronic Braking System) with EBS socket at the front, without connection cable Note: This trailer must only be towed by tractor vehicles that ensure ABS functionality! With lift & lower valve Vehicle stability control system Wheels and Tyres 6x 385/65 R22.5" tyres 6x steel rims Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white marker lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Tipping Body Aluminium box body made of high-quality, abrasion-resistant material Sloped 5 mm thick front wall with external cylinder mounting Side walls made of 30 mm hollow chamber profiles, clean welded, with bulk material deflecting top rail. Internal ladder at the front wall Shovel and broom holders outside front wall Rear wall with pendulum mounting and 'double-joint' hinges, with 2-winged door split 1/2 to 1/2, upper swing beam, with one grain slide per door Rear wall with rubber seal 6 mm continuous floor Standing platform with access, connecting plate for air/electric/brake Roll tarp can be stowed one side (FR-right), with central locking (FR-left) Operating Notes For transporting salt, lime, etc., we recommend a tipping cylinder with a hard chrome-plated piston rod to prevent corrosion and damage from the material. The total weight stated is technically possible; depending on the cargo, the full weight may not be achievable within the permissible axle/support/saddle loads (incorrect load distribution may result in poor handling and tracking). Note! Not suitable for chemically aggressive substances (e.g., acids, chlorine compounds, sulphur compounds, alternative fuels); such substances can cause stress corrosion cracking and extreme cracking in the body when combined with moisture on the body surface! Vehicles with load bodies are intended for chemically non-aggressive cargo. Use for transporting aggressive goods such as acids, bases, salts, fertilizers, sewage sludge, and household waste is at the operator's own risk. This can result in damage such as stress corrosion cracking or pitting. Archive images are shown!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902024358, empty load weight: 6,149 kg, maximum load weight: 28,851 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2018, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", color: blue, #Chassis – haulage semi-trailer - Fine-grain steel welded construction, fifth wheel coupling plate with replaceable 2" kingpin - Slightly angled outer frame with "Load-Lock-Profil" for lashing strap attachment - 13 pairs of additional lashing rings recessed into the outer frame, 2.5 t each - 24 t two-speed landing legs, single-side operation, straight foot, without thrust compensation - Pull-out ladder at the rear - Side door retainers - Wheel chocks with holder - Pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm - Note: free support-leg corner dimension / rear swivel radius approx. 1930 mm - Galvanised steel rear underrun protection - Full-width rear mudflap - Half-shell mudguards with anti-spray flaps on the last axle only - Rear impact protection - "Blocker" – galvanised transverse steel angle, protecting against forklift damage and shielding the door hinges - 4 pairs of ferry lashing rings, marked yellow - Bolted pallet stop on both sides, approx. 15–20 mm high, reducing loading height by approx. 15–20 mm - Stainless steel storage box, W=600/H=400/D=500 mm, with polished lockable door #Rear wall / rear corner posts - Rear corner posts in steel up to roof edge, tarpaulin attachment with round tube and tensioning ratchet - Two-leaf rear portal doors, each with 2 internal rod locks #Tarpaulin - Tarpaulin with welded-in horizontal and vertical straps - Quick Lock System for side curtain with central locking, on the left (direction of travel) - Stainless steel tensioning locks on the right (direction of travel) - Customs cable running around the trailer with holder on the front wall (no customs seal, not combined with Quick Lock System) - Customer livery on side curtains and rear portal - Curtain with high-strength embedded spring steel strips, left side (direction of travel) – insertion battens on the left omitted as a result #Roof - Sliding roof, rear end-lift foldable, roof cover slides from rear to front, curtain colour: white - Eco lift roof, raised by approx. 380 mm on both sides, gas-strut assisted, optimum rain gutter at the rear, at the top of the rear bow above the doors #Paintwork - Frame: hot-dip galvanised incl. passivation - Landing legs: black coated - Front corner posts: galvanised and painted in front wall colour - Front wall: MB 5328 blue - Rear corner posts: galvanised and painted in rear wall colour - Rear wall: MB 5328 blue - Tarpaulin: RAL 5010 gentian blue Kdedpfx Ahswyiw Ej Ejt - Pallet box lid: RAL 2011 deep orange - Note: the images are archive photos; the vehicle may still be in use.

Condition: used, maximum load weight: 29,660 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2021, next inspection (TÜV): 12/2026, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,420 mm, total width: 2,550 mm, total height: 3,390 mm, Year of construction: 2021, Equipment: ABS, * Saddle height approx. 1270 mm * Foldable underrun protection * Towing hook at the rear * Camaro convertible top, electric drive with remote control * SAF axles, off-road version * Disc brakes, 430 mm diameter Kjdpfozvz Thox Ah Esdt * Air suspension * 1st axle as a lift axle (automatic and can also be operated from the truck) * Lift axle with forced lowering and starting assist * Polished aluminum rims * LED lighting * Hydraulic system, low-pressure cylinder, 170 bar * Rear wall with hinged flap * Side wall, 4 mm thick, continuous * Floor, 4/5 mm thick * Dump body color: steel gray * Frame color: nova gray * Support legs, galvanized * Aluminum ladder, 3300 mm with bracket * Broom and shovel including bracket on the front wall * SP 06.2027 * And more * Subject to errors, changes, and prior sale

Condition: used, machine/vehicle number: WFDFLT33802021791, empty load weight: 6,433 kg, maximum load weight: 28,567 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2017, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 445/45 R19,5", color: black, Please note: The images shown are archive photos. The vehicle may still be in operation. ## Fliegl Mega Curtainsider Semi-Trailer Chassis: Lightweight fine-grain steel chassis, replaceable 2" kingpin, Load-Lock outer frame, 24 t JOST two-speed landing gear, rear access ladder, door retainers, aluminium side underrun protection, galvanised rear underrun protection, quarter mudguards, anti-spray mud flaps, Heavy Blocker rear impact protection with side roller buffers, heavy-duty pallet stop, spare wheel carrier, lockable toolbox with drawer, document box. Axles & Suspension: BPW drum brake axles (8-stud hubs), laser wheel alignment, mechanical hubodometer, air suspension, automatic lift axle with forced lowering and traction aid (activated by brake pedal or manual switch). Brakes: Dual-line air brake system, spring parking brake, WABCO EBS, lift/lowering valve. Raising the lift axle increases loading/overall height by approx. 50 mm. Ksdozlciispfx Ah Eodt Tyres: 445/45 R19.5 (manufacturer's choice). Electrical: 24 V LED lighting, LED side markers, LED front position lights, LED rear outline lights, 2 × 7-pin and 1 × 15-pin front sockets. Floor: Approx. 30 mm plywood floor with Omega-reinforced joints, suitable for forklift axle loads up to 7,100 kg. Front Wall: 2,580 mm high, steel corner posts, curtain release system, internal steel impact protection, additional 1,250 mm plywood lining. Centre Posts: 3 pairs of full-length sliding posts with multiple locking positions. Side Slats: Aluminium or timber V-slats. Rear: Steel rear corner posts, double rear doors with internal locking bars, curtain tensioning system. Curtains: Reinforced curtains with welded horizontal and vertical straps, stainless steel buckles. Roof: Sliding roof, rear end lift, automotive L-roof rails, hydraulic lifting roof on both sides (+400 mm), rain gutter at rear. Certification: DEKRA approval, EN 12642 XL load securing certificate, VDI 2700 Sheet 12 beverage transport certification, ECE R70 rear warning plate.

Condition: used, Year of construction: 2020, Slider length: 3000 mm Cutting width at the rip fence: 1000 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring saw: no Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut ruler display: scale Crosscut ruler with miter function: yes Saw blade diameter: 450 mm Speeds: Vario Motor power: 5.5 kW Dust extraction connection: 80 and 120 mm Kdodpfx Ajz A D Uxjh Eot Machine length: 3200 mm Machine width: 2200 mm Weight: 1200 kg

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031812, empty load weight: 6,115 kg, maximum load weight: 28,885 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 10/2026, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 40 %, ground clearance: 310 mm, color: red, Please note: the images are archive photos! The vehicle may currently be in use. #Chassis – haulage semi-trailer Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Slightly tapered outer frame, new design with "Load-Lock-Profil" for lashing strap attachment 24 t 2-speed landing legs, single-side operation, with half-round foot and straight mounting plate, with thrust compensation Pull-out ladder at the rear "D-Lock" door retainer for I-Lock closure 2 wheel chocks with holder Pallet box (capacity: 24 Euro-pallets) "Heavy Blocker" rear underrun protection, transverse + lateral roller-type impact buffer 1 plastic tool box, w=600 / h=425 / d=460 mm Storage compartment for 32 slat boards under the loading floor Kdjdpfx Ahozxz R So Eot Pallet stop on both sides, approx. 15-20 mm high, bolted design #Axles & suspension BPW disc brake axles with 430 mm disc diameter Laser-aligned axles/chassis – reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, additionally operable electrically from the truck, including forced lowering and pull-away aid #Braking system 2-line air braking system Colour-coded pipework for easy servicing Spring-loaded parking brake 2 anti-mismatch coupling heads at the front 24V EBS, electronic braking system with EBS socket at the front with lift & lower valve + auto-reset function Vehicle stability system #Wheels and tyres 385/65 R22.5" Polished aluminium rims, Alcoa Dura-Bright #Electrics 24V, LED multi-chamber lights, yellow LED side marker lights, number plate light 2 white LED front position lights 2 white/red LED outline marker lights at the rear 1 x 15-pin socket at the front LED work lights on both sides 2 additional LED work lights at the rear #Floor Plywood flooring approx. 30 mm thick, on longitudinal bearers for high point load capacity, for forklift axle loads up to max. 7100 kg Steel sheet covering fitted at the rear over approx. 300 mm Premium floor sealing – floor sealed all around #Front wall / front corner posts 2580 mm high, steel corner posts of box-section design, release mechanism for the side curtain at the front wall Crash-Blocker, steel impact protection on the lower inside, approx. 140 mm high #Centre posts 3 pairs of sliding posts, movable along the entire length 3 pairs of post positions #Slat boards Aluminium V-profile slat boards #Rear wall / rear corner posts Rear corner posts, steel, up to roof edge, curtain attachment with round tube and curtain tensioning ratchet Rear barn doors, 2-leaf Fliegl "I-Lock" integrated door lock, awarded the "iF Design Award" #Roof "Fliegl-Blitz-Verdeck" Sliding roof, rear end bow foldable, roof sheet slides from rear to front, L-shaped roof rail as used in the automotive industry Roof non-elastic, minimal deflection of the roof rail Anti-Ice System, with 1 central hose, automatic forced venting via the brake light Optimum rain gutter at the rear #Country of registration / plates Type approval per EC 2007/46 Fliegl manufacturer's certificate for body strength per EN 12642 XL Fliegl manufacturer's certificate for load securing per VDI 2700 sheet 12 ff. Warning board per ECE-70 Please note: archive photos!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34002026856, empty load weight: 5,592 kg, maximum load weight: 29,408 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", color: white, The images are archive images! The vehicle may be in use! Chassis: Saddle for trucking company Fine-grained steel welded construction in reinforced Scandic design, saddle plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock profile" for securing lashing straps Lashing rings for use in the "Load-Lock profile", 6 tons each, loose 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Free swivel radius to the support leg approx. 2200 mm, support leg dimension approx. 2350 mm 2 shims with holder Side impact protection, aluminum Under-run protection, galvanized steel Quarter panel fenders in front of and behind the axle unit with anti-spray flaps, only on the last axle 1 plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock (lock not included) 1 pair of pole pockets recessed in the outer frame/floor at the very front, inner dimension 83 x 83 mm 2 steel poles, B=80/ D=80/ L=1200 mm, hot-dip galvanized Note: The pole pockets / insertion poles are not designed for the sole securing of long materials, pipes, etc. without lashing 4 pairs of lashing eyes, yellow marked Axles + Suspension 3 BPW drum brake axles "Axle/chassis laser-measured" to reduce tire wear and fuel consumption Air suspension Kedex Rq Slepfx Ah Eodt Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS brand Wabco Premium, electronic braking system with EBS socket at the front, without connecting cable, Wabco Premium incl. open CAN BUS for telematics Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plate lighting in LED (Note! In certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Front panel / corner posts at the front 2 580 mm high, corner posts made of steel in a full volume design, release mechanism for side tarpaulin on the front panel "Crash-Blocker", at the bottom inside at approx. 140 mm height with steel ram protection Sliding battens Rows of wooden sliding battens Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Tensioning devices made of stainless steel Floor Sieve plate approx. 30 mm thick, on longitudinal crossbeams for high point load capacity for forklift axle load up to max. 7100 kg Note: Floor deformation due to weather conditions possible (no guarantee)! Rear panel / corner posts at the rear Corner posts at the rear made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal swivel bar locks each Roof Sliding tarpaulin, rear lift that can be folded up, with tarpaulin that can be slid from back to front, tarpaulin color: white optimal rain gutter at the rear, at the top of the rear beam, above the doors Country of approval / plates Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the side a

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902032084, empty load weight: 4,140 kg, maximum load weight: 33,860 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,240 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: white, 25 m³ Aluminium Tipper Body Please note: The images shown are archive photos. The vehicle may still be in operation at the time of inquiry. --- Kdedpfxowhfiys Ah Ejt ## Wheels * Alcoa Dura-Bright aluminium wheels --- ## Axles & Suspension * Air suspension system * 1st axle as automatic lifting axle including forced lowering and traction aid * Traction aid activated via “3x braking” * Function active up to 30% axle overload and max. 25 km/h * Galvanised lifting axle mechanism * 10-year anti-corrosion warranty against perforation rust --- ## Electrical System * 24 V electrical system * LED multi-chamber rear lights * Yellow LED side marker lights * 2 white LED front position lights * 2 white/red LED rear outline marker lights * 1 × 15-pin front socket (without connecting cable) * 2 integrated rear LED work lights, activated via reverse gear --- ## Hydraulic System * High-pressure tipping cylinder, max. 250 bar * Hard-chrome plated first stage * HDK screw coupling, fixed section, NW 48 mm (without hose connection) * Hydraulic operation via truck PTO (power take-off) * Hydraulic connection with hose and HDK screw coupling NW 48 mm with knurled nut * Cylinder transferred from the replaced vehicle --- ## Tipping Body – Aluminium Box Body (25 m³) * High-quality wear-resistant aluminium body construction * Sloped 5 mm front wall with external hydraulic cylinder mounting * Side walls made of 30 mm hollow chamber profiles, fully welded * Upper edge profile designed to prevent material build-up * Internal access ladder at front wall (not compatible with Cramaro system) * External shovel and broom holder on front wall * Aerodynamic tapered “Greenline” body design ### Tailgate * “Membrane” rear wall with double-joint hinge system * Externally mounted pendulum tailgate with double hook locking system * Rubber-sealed tailgate * Heat resistant up to max. 170°C ### Floor & Equipment * Continuous 6 mm steel floor * Standing platform with access ladder * Connection panel for air, electrics and braking system with large free working space for optimal operation * Sliding tarpaulin system, one-sided storage (right-hand side driving direction) * Central locking on left-hand side --- ## Paint / Finish * Aluminium natural finish (body) * Galvanised or coated components depending on specification --- Optional Note: The cylinder shown may originate from a previous vehicle and is reused depending on configuration.

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2013, loading space length: 13,600 mm, loading space width: 2,520 mm, Equipment: ABS, Schmitz Cargobull S01 Platform, Lift Axle, Aluminum Side Walls, Runge STEEL TRANSPORT Int. No. for inquiries: 0326236 * ABS * EBS * 3-axle, air-suspended * Lift axle * Disc brakes * BPW axles * Aluminum side walls * Runge Cargo space length: Length: 13,600 mm * Width: 2,520 mm Kdodpoyulw Njfx Ah Ejt Tires: 1st axle: 385 / 65 R 19.5, 20% air-suspended / lift axle 2nd axle: 385 / 65 R 19.5, 20% air-suspended 3rd axle: 385 / 65 R 19.5, 20% air-suspended ----Price: EUR 7,900 + 19% VAT For further questions, you can reach us at the following telephone numbers: * We speak: German, English, French, Polish, and ??? Subject to typing errors, errors and prior sale.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902037031, empty load weight: 4,795 kg, maximum load weight: 30,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2025, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,040 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, color: grey, These images are archive images! The vehicle may still be in use! Fine-grain steel welded construction, in basic lightweight design, kingpin plate with replaceable 2" kingpin, Curved front end "Patented" 24-ton, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Support wedges with holder Underrun protection, foldable Half-shell fenders Integrated "fender holder," surface resistant to stone chipping with anti-splash flaps only on the last axle Tarpaulin rod with holder Towing hook at the rear (not on Revolution model) Axles + Suspension SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assistance, activated by "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) "Hot-dip galvanized lift axle mechanism" Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Automatic tilting lowering with shut-off valve Kdedoy Rrplspfx Ah Eet "TPMS" tire pressure monitoring system - display on the tractor unit, via EBS, without truck installation (the truck must have the necessary prerequisites. Only on base tires). Wheels and tires 385/65 R22.5" Steel rims Electrical system 24 volts, multi-chamber lights in LED, yellow LED lighting on the sides, license plate lighting in LED (Note! with certain tractor units, false diagnoses may occur, although the function is given) Yellow LED lighting on the sides linked to the turn signal "flashing side lights" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, without connecting cable Additional LED work light, integrated and recessed at the rear, switched via reversing light Hydraulics Low-pressure cylinder max. 170 bar Operation hydraulically via truck auxiliary drive Bins Aluminum box body made of high-quality, abrasion-resistant material. Sloping front wall, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, cleanly welded, with top rail profile that prevents spillage. Inside with access ladder on the front wall (not in conjunction with Cramaro). Shovel and broom holder outside on the front wall. Greenline - conical and aerodynamic bin shape "Membrane" - rear wall Rear wall as a hinged flap with "double-hinge hinge," externally mounted with double hook lock. Rear wall with rubber seal Floor continuous, 6 mm thick Standing platform with access ladder, connecting plate for air/electrical and brake connections with large clearance for optimal operability. Roll tarp, can be folded to the right side, with central locking on the left side Operating instructions For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod, so that it is not attacked and rusted by the material.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,840 kg, maximum load weight: 21,160 kg, overall weight: 26,000 kg, axle configuration: 2 axles, loading space length: 12,050 mm, loading space width: 2,550 mm, total length: 12,200 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", Customized transport solution Kjdpfx Ahjzb Ikfo Eedt Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, semi-trailer, transport company Fine-grained steel welded construction, turntable with replaceable 2" kingpin, reinforced mounting point for "gallows" attachment, and with sturdy wear plates all around, attachment rail for aluminum ramps at the rear Outer frame slightly inclined, new design with "Load-Lock profile" for securing lashing straps, "patented Load-Lock cross" for securing lashing straps, in the cross member under the outer frame, 24-ton, two-speed support winch, single-sided operation, with straight lower part, without stroke compensation, free support foot angle or free swivel radius to the rear approx. 1920 mm, without supports, 2 shims with holder, aluminum side impact protection, steel under-run protection, quarter panel fenders in front of and behind each axle, without bull bar, spare wheel holder for 1 spare wheel, with wheel fastening kit, spare wheel, manufacturer same as standard tires, steel rim Plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock Axles + Suspension Drum brake axles, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, without steering, air suspension, without lift axle Braking system 2-line compressed air braking system, color-coded line routing for easy maintenance, spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable, note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raising and lowering valve, vehicle stability system Wheels and tires 205/65 R17.5, manufacturer's choice for 8-ton axle load at 80 km/h, steel rims, factory silver Electrical system 24 volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin socket at the front, without connecting cable, LED work lights in a curved design (switched via reversing light), if technically possible, additional LED work light at the rear, switched via reversing light Floor Sieve-printed panels approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5600 kg Front wall / front corner posts 25 mm aluminum hollow profile, 1350 mm high, corner posts steel in full volume design Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.