Used Femitec Nv 2102-Nefc for sale (1,724)

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Heavy-duty transport trolley for weights up to 35 tons. The transporter is supported by four pivoting heavy-duty wheels and two omnidirectional drive wheels (--> in any desired direction). The drive wheels are pneumatically pressed onto the ground to achieve optimal traction. By rotating the two drive wheels, the various drive modes of the transporter are activated. This creates a very flexible transporter that can move longitudinally, laterally, and rotate on the spot. The transporter integrates a 35-ton lifting table, the contact surfaces of which are equipped with heat sinks to dissipate the heat emitted by the pallet (during the transport of warm/hot material). The lifting system is driven by a central motor, and the power transmission takes place via two gearboxes and axles that run through the frame. These axles drive 4 shafts at the corners of the transporter. Depending on the transport goods, a device can be constructed that is supported by the lifting system. The entire system is protected by aluminum covers, each of which is numbered so that it can be easily reattached in the correct position after maintenance. The transporters are designed to move a maximum load of 35 tons with a maximum speed of 1.5 km/h in manual mode and 1 km/h in semi-automatic mode. The speed can be adjusted continuously via the manual control with joysticks. Without a load and in manual mode, the transporter can reach 2.5 km/h; in semi-automatic mode, the speed is limited to 1.5 km/h. Control: SIEMENS SIMATIC Operation: Radio remote control Dedpfx Ajxa Endeayouw Drive: Battery-powered Dimensions approx. 3600 x 2500 x 800 mm

Year of construction: 2008, condition: used, functionality: unexamined, Air-cooled liquid chiller for cooling water/glycol circuits, suitable for process cooling, cold storage rooms, or production facilities. The unit was fully operational until dismantling and has been stored ever since (four years). Duodpfx Aaoy Rh U Doyew Complete refrigeration unit with compressors, condensers, and control system. Commissioning must be carried out by a certified refrigeration specialist.

Year of construction: 2020, condition: ready for operation (used), The driverless vehicle was used for transporting two bigbags, max. product weight: 2x 1.1t, max. product dimensions: 1200x1200x1950mm, max. driving speed: 40m/min, controls: SIEMENS SPS, weight: 3.6t, operational hours counter: 20h. Duedpfx Ask Rbdhsaysw

Condition: good (used), Year of construction: 2005, functionality: fully functional, Equipment: documentation/manual, BOEHRINGER NV 250 CNC vertical turning lathe For sale is a BOEHRINGER NV 250 CNC vertical turning lathe, manufactured in 2005. The machine is ideally suited for automated series production of turned parts. The pick-up spindle and the existing workpiece feeder enable automatic loading and unloading. Technical data: Manufacturer: BOEHRINGER Type: NV 250 Year of manufacture: 2005 Spindle head: A6 Max. chuck diameter: 250 / 315 mm Spindle bore: 65 mm X-axis: 760 mm Z-axis: 260 mm Y-axis optional: ±50 mm Max. spindle speed: 5,000 rpm Spindle power: 31 kW Duodpfxszkk Ude Aayjw Max. torque: 350 Nm C-axis: available 12-position tool turret Tool holder: VDI 40 / DIN 69880 Rapid traverse X/Z: 120 / 40 m/min Machine weight: approx. 8,500 kg Connection: 400 V / 50 Hz / 3 AC Equipment: Pick-up spindle Automatic workpiece feeder C-axis 12-position turret VDI 40 tool holder Chip conveyor Coolant system UNIFIL extraction system / filter system Documentation available Condition: Used Machine complete Inspection under power possible by arrangement

Condition: good (used), mileage: 168,871 km, power: 100 kW (135.96 HP), first registration: 03/2021, fuel type: diesel, tire size: 225/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 6,100 mm, total width: 2,070 mm, total height: 2,500 mm, loading space length: 3,530 mm, loading space width: 1,760 mm, loading space height: 1,890 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, electric window regulation, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Rear view camera Duodeziuvvjpfx Aaysw - Fabric - Partition = Notes = Configuration: 4x2, Tare weight: 2144 kg, Gross vehicle weight: 3500 kg, Tow hitch, Cabin type: Single cab, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, Color: White, Heated mirrors, Rear view camera, Lighting type: Halogen lamp, Bluetooth, Engine power: 100 kW (134 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: additionally extended, Side paneling, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Seats: 3, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, L3H2, air conditioning, tow hitch, 168,000 km, Spare wheel, Tire type: Summer tires = Further Information = General Information Number of doors: 1 License plate: KLEYN1 Axle Configuration Tire size: 225/65R16 Brakes: Disc brakes Axle 1: Tire tread depth left: 2 mm; Tire tread depth right: 3 mm; Suspension: Coil spring suspension Axle 2: Tire tread depth left: 8 mm; Tire tread depth right: 8 mm; Suspension: Leaf spring suspension Weights Unladen weight: 2,144 kg Payload: 1,356 kg GVWR: 3,500 kg Functional Loading platform height: 59 cm Maintenance APK (Technical Inspection): valid until 07/2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial Information Leasing price: €194 per month (van, 72 months); Ask for more information and conditions.

Condition: good (used), Year of construction: 2002, DC motor, motor, electric motor -Volt: 48 V -Speed: 2000 rpm Dujdpfx Ast Apmvjayew -Power: 2 kW -Design: B3 -Quantity: 2 pieces available Price: per piece

Condition: used, Door closer, floor door closer, locking body -Manufacturer: Geze, floor door closer closing body type TS 500 NV, unused Ovp -Article No.: 0672-CPR-0121 -Number: 11x door closers available -Price per piece Dujdpfxotu Rlfe Aayow -Dimensions: 300/90/H80 mm -Weight: 3 kg

Year of construction: 1998, condition: used, fuel type: electric, Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Sichelschmidt, steering motor from electric forklift truck M 1510 V -Motor: Motovario 113-MP-NV-Q 48V/500W -Dimensions: 400/160/H180 mm Dusdsi Dbz Ijpfx Aayow -Weight: 17 kg

Condition: used, door closer, floor door closer, closing body -Manufacturer: Geze, floor door closer closing body type TS 500 NV .: 0672-CPR-0121 -Dimensions: 270/70/H65 mm Dedpfx Asuxg N Ijayouw -Weight: 2.8 kg

Condition: ready for operation (used), Bosch NV 21/1F-D servo drive No.: 1070084067-109 SN: 003843640 - In/Out: 3-phase, 50/60Hz / 460V, 25A, used, in good condition, 100% functional, scope of delivery as per photos. Duodpfx Aex Eqxzoayew

Condition: new, Year of construction: 2026, Optimum Metal Bandsaw OPTIsaw S 275NV Metal bandsaws with a swiveling saw blade. S 275NV with continuously adjustable saw blade speed. Article number: 3300265 TECHNICAL DATA Dimensions and weights Length (product) approx. 1400mm Width/Depth (product) approx. 685mm Weight (net) approx. 185kg Width/Depth max. (product) approx. 985mm Height max. (product) approx. 1700mm Electrical data Power of drive motor 1.5kW Connection voltage 230V Mains frequency 50Hz Motor power of coolant pump 90W Machine data Saw blade speed(s) 20 – 90m/min Saw blade length 2480mm Saw blade width 27mm Saw blade thickness 0.9mm Cutting angle 0 – 60° Feed rate continuously adjustable Raising of the saw blade manually Cutting ranges Cutting range 0° round (solid material) 225mm Cutting range 0° square (solid material) 190mm Cutting range 0° rectangular (lying) (solid material) 150 x 245mm Cutting range +45° round (solid material) 145mm Cutting range +45° square (solid material) 150mm Cutting range +45° rectangular (lying) (solid material) 190 x 150mm Cutting range +60° round (solid material) 90mm Cutting range +60° square (solid material) 90mm Cutting range +60° rectangular (lying) (solid material) 120 x 90mm Explanation of cutting range: The cutting range is determined using aluminum due to the weight of the saw blade. It may vary when using different materials and may be smaller in some cases (not cutting capacity). SCOPE OF DELIVERY Djdpfx Aaogx T I Uoyeuw Material stop Bi-metal saw blade Machine base Coolant pump Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: used, mileage: 427,000 km, first registration: 10/2018, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, Year of construction: 2018, Equipment: air conditioning, central locking, MAKE: NISSAN NV MODEL: KLUBB K32 YEAR: 2018 Dodpoy Nhnzjfx Aaysuw CE: YES MILEAGE: 427,000 KM TYRES/UNDERCARRIAGE: 60% POWER: KW ENGINE: NISSAN WEIGHT: 3,500 KG OPTIONS: 13M WORKING HEIGHT 120KG PAYLOAD

Condition: used, mileage: 251,000 km, first registration: 09/2018, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, Year of construction: 2018, MAKE: NISSAN NV MODEL: KLUBB K32 YEAR: 2018 Dsdpfxey Nhplj Aayeuw CE: YES MILEAGE: 251,000KM TYRES/UNDERCARRIAGE: 60% POWER: KW ENGINE: NISSAN WEIGHT: 3,500KG OPTIONS: 13M WORKING HEIGHT 120KG LIFT CAPACITY

Condition: ready for operation (used), Year of construction: 2006, This 4-axis MORI SEIKI NV-5000α1/40 was manufactured in 2006. It features an X-axis travel of 800 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1,100 × 600 mm with a maximum table load capacity of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NV-5000α1/40 vertical machining centre we have for sale. Contact us for further details. Duedpfx Aey Uxaxsaysw

Condition: used, mileage: 74,000 km, power: 92 kW (125.09 HP), first registration: 08/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 5,600 mm, loading space length: 3,000 mm, Equipment: ABS, air conditioning, central locking, soot filter, Now chat via WhatsApp: Contact our sales advisor quickly and easily. Attention !!! Preferential sale to business customers only. Internal ID number: [3269] ----Optional bookable: * 12–64 months warranty (valid throughout the EU) * New inspection * New MOT & emission test * Nationwide delivery * Financing available even without a down payment * Tow bar / reversing camera retrofit available on request! * Spring Offer: On request and for an additional price of only €999, increase the towing capacity to up to 3,500 kg (vehicle- and manufacturer-dependent). ----Vehicle Highlights: * 19% VAT deductible * Regularly serviced * German vehicle * Immediately operational * Euro 5 emissions standard * High roof + long wheelbase * Tow bar: 2,500 kg * Air conditioning * Reversing camera Duodpfey Ain Nox Aaysw * On-board computer Special equipment: Rear wing doors without glazing (opening angle 270 degrees), sliding door in cargo/passenger compartment right side with glazing. Additional features: Storage compartment with footwell lighting, overhead storage shelf, driver airbag, audio controls on the steering wheel, audio system: radio with CD player and Bluetooth, electrically adjustable and heated exterior mirrors, on-board computer, integrated sunglasses holder in headliner, COMFORT design and trim line, tachometer, rear parking sensors, electronic brake force distribution (EBD), driver assistance system: hill-start assist, rear window package, body type: high-roof box van, fuel tank: 105 liters, height-adjustable steering column, engine 2.3 liters – 92 kW dCi diesel, rear fog lamp, wheelbase 3,682 mm, full-size spare wheel, low emission as per Euro 5 standard, gear shift indicator, front mud flaps, front side airbag, cabin seating: double passenger seat, 12V socket in cargo/passenger area, partial glazing, heat-insulating glazing with UV protection. ----Interested in leasing or financing? We offer attractive terms – also with no down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: All information online is non-binding and intended only as a general description of the vehicle. Errors, typos, and prior sale reserved. The binding condition of the vehicle is defined solely by the purchase contract executed on-site or confirmed in writing. Vehicles with a mileage of over 50,000 km or older than 3 years are preferably sold to business customers.

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width max. 245 x 150 mm voltage 230 V power capacity 1,5 kW dimensions of saw-band 2480 x 27 x 0,9 mm mitter cutting 0 - 60 ° cutting speed 20 - 90 m/min weight of the machine ca. 185 kg dimensions of the machine ca. 1,4 x 0,69 x 1,7 m - stepless speed - stepless feed - miter cut - Bi-metal saw band - Material stop Duodpey Ty Dpofx Aayjw - Machine base - Coolant device

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 400 mm z-travel 400 mm control MSX 501 Mori Seiki table surface area 700 x 450 mm max. table load 350 kg number of T-slots 4 T-slot - width 18 mm T-slot - distance 100 mm Number of revolutions 12.000 U/min power capacity - main spindel 18,5 / 15 / 11 kW tool taper BT 40 max. Torque 110,5 Nm diameter of forward milling spindle bearing 70 rapid travel x/y/z 20.000 mm/min feed speeds 1 - 20.000 mm/min Tipp feed 15 Steps / 0 - 1.260 mm/min Number of Toolpositions in magazine 40 Pos. Max. mould width 80 mm max. tool-dia with free toolbox 125 mm max. tool length 250 mm max. tool weight 8 kg change-time chip to chip 2,8 sec change-time tool to tool 1,0 sec total power requirement 34 kVA weight of the machine ca. 7,2 t dimensions of the machine ca. 2,8 x 3,0 x 2,9 m Machining Center Vertical MORI SEIKI - NV 4000 DCG - ca. 14.000 Operating-Hours Duodpfjv Az Ucjx Aayew

Condition: new, Bandsaw machine Manufacturer: OPTIMUM Model: S 275 NV Item No.: 3300265 Condition: New machine Cutting capacity (round): 225 mm Cutting speed: 20 - 90 m/min Dodpsdynpcjfx Aayouw Standard equipment includes: - Horizontal clamping device - Length stop - Automatic shut-off after the end of the cut - Chip removal brush - Coolant system - Operating manual

Condition: good (used), mileage: 135,075 km, power: 88 kW (119.65 HP), first registration: 03/2022, fuel type: diesel, tire size: 205/65R16, axle configuration: 4x2, wheelbase: 3,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 5,400 mm, total width: 1,960 mm, total height: 2,150 mm, loading space length: 2,510 mm, loading space width: 1,660 mm, loading space height: 1,390 mm, Year of construction: 2022, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, = Additional options and accessories = Dujdpfx Asy Iwaweayjw - Halogen lamp - Incl. ladder roller and steps - Manual - Radio/cassette - Fabric upholstery - Partition wall = Notes = Configuration: 4x2, Unladen weight: 1859 kg, Gross vehicle weight: 3050 kg, Cab type: single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: none, Electric windows, Electric mirrors, Partition wall, Radio/cassette, Color: white, Lighting type: halogen lamp, Bluetooth, Engine power: 88 kW (118 HP), Fuel: diesel, Euro standard: 6, Drive system: timing chain, Transmission: manual, Gears: 6, Power steering, ABS, ASR (traction control), Starter battery, Body type: raised, additionally extended, side walls lined, Roof rack: incl. ladder roller and steps, Side doors: 1, Rear access: double doors, Central locking, Number of seats: 3, Seat configuration: 1+2, Seat cover: fabric, Seat adjustment: manual, long wheelbase, air conditioning, roof rack, steps, Spare wheel, Tire type: summer tires = Further information = General information Number of doors: 1 Registration number: KLEYN1 Axle configuration Tire size: 205/65R16 Brakes: disc brakes Suspension: coil spring Axle 1: Tread depth left: 7 mm; Tread depth right: 7 mm Axle 2: Tread depth left: 7 mm; Tread depth right: 5 mm Weights Curb weight: 1,859 kg Payload: 1,191 kg Gross vehicle weight: 3,050 kg Functional Loading platform height: 55 cm Maintenance APK (general inspection): valid until 03/2027 Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Financial information Lease price: €260 per month (commercial van, 72 months); Please ask for further information and terms

Condition: used, axle configuration: 2 axles, loading space length: 110,500 mm, loading space width: 25,100 mm, loading space height: 10,000 mm, Year of construction: 2009, Equipment: ABS, = Additional Options and Equipment = - EBS - Electronic Braking System - Rear air suspension - Front air suspension = Notes = For vehicle inquiries, please contact Mr. Seidel (by phone at CY NV 1214/20T/37). Crane: Palfinger 44002, radio remote control, support legs middle and rear, pallet tongs, additional spotlights: vehicle rear, crane, air suspension, BPW axles, drum brakes, Tridec steering, both axles steered, central lubrication system, handbrake crank, cargo space dimensions: length 11,005 mm, width 2,510 mm, height 1,000 mm, tire tread depth: 1st axle: 10–12 mm, 2nd axle: 11 mm. If desired, we can provide you with a leasing or financing offer. Mr. Seidel (phone) will be pleased to assist you. For further information, please visit our homepage. ... Subject to errors, changes, and prior sale !!! Steering axle = Further Information = Unladen weight: 16,320 kg Payload: 20,680 kg gross vehicle weight (GVW): 37,000 kg Please contact Tobias Ebert for more information. Dodpsyfp H Njfx Aayeuw

Condition: excellent (used), Year of construction: 2017, Cell with TIG-OTC-NH52-NEFC welding robotCountry of origin of the cell: Italy Year of manufacture: 2017 Country of origin of the robot: Japan Duedpem Uyhhsfx Aayow Brand: OTC NH5 Year of manufacture: 2016 Number of axes: 6 Reach: 866 mm Load capacity: 5 kg Control: OTC FD 11 Source: OTC DA 300-P Cell dimensions: Length 3500 mm 1900 width mm Height 2400 mm

Condition: used, Gear drilling machine MK 4 with autom. Feed and thread cutting device Gear stage with speed 315 and 630 is out of operation, otherwise perfect function Speed range from 80 - 2800 rpm Throat 300 mm Table 380 x 500 mm Quill stroke 160 mm Djdpfsf Nwu Eex Aayjuw

Condition: used, Year of construction: 2001, Technical details: turning diameter: 300 mm swing diameter: 350 mm turning height: 275 mm x-axis: 925 mm z-axis: 250 mm clamping chuck diameter: 200 mm Feed speed: 30 m/min. total power requirement: 45 kW weight of the machine ca.: 7 t Machine was used just from time to time in the last years - very good condition! with CNC SIEMENS 840 D 12-station turret head with driven toolings workpiece in and out conveyor belt coolantattachment and chip conveyor diverse accessories Duedpfx Asvb Dq Doayjw *

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 milling machine equipped with a 3-axis Heidenhain TNC113 active control, notable for its ease of operation. This modern version, built in 1989, features central lubrication, an electric coolant pump, and a machine lamp, among other benefits. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on-site at any time. Delivery time: on request Machine no.: 2102-xxxx Table: Rigid angled table or rotary-tilt-swivel table Travel (X/Y/Z): X 300 mm / Y 160 mm / Z 340 mm Quill travel: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool taper: SK40 Feed: Infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, infinitely variable feed regulation on all 3 axes, coolant unit, central lubrication, technical documentation, leveling feet, safety equipment (optional) Dsdepy Eldspfx Aaysuw Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines undergo thorough inspection - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - If required, you can order additional accessories such as tools, etc., directly - We can also install further equipment such as safety devices upon request - We are happy to handle shipping and/or installation

Condition: used, functionality: fully functional, mileage: 49,350 km, fuel type: diesel, color: white, emission class: euro6, Year of construction: 2021, NISSAN NV 400 Year 2021 DIESEL/ Euro 6B Km: 49,350 Manual transmission/ Engine capacity 2299 cc/ 96 kW GVW 3.5 t – Category B license Dsdpfxoycw Dqo Aayjuw Payload: 1,340 kg / Wheelbase: 4,350 mm Accessories: - Air conditioning Body setup: - Fixed flatbed 4100 x 2200 mm