Used Fanuc Santenberg 21I Emiob00021I A03B-0815-C001 for sale (2,516)

Condition: good (used), Year of construction: 2012, Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input module, sensor/actuator module, connection, electronic modules, PLC module, expansion module Hedpfjkahi Hjx Af Sju -Manufacturer: Fanuc, Electronic module expansion module from CNC machining center Santenberg GTC S 2 -Type: 21I EMIOB00021I -Expansion module: Type: A03B-0815-C001 4 pcs. -Dimensions: 545/220/H140 mm -Weight: 3 kg

Condition: used, Year of construction: 1988, functionality: fully functional, workpiece weight (max.): 350 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 270 mm, wire diameter (max.): 0.3 mm, table width: 450 mm, overall weight: 2,300 kg, table length: 600 mm, table height: 300 mm, empty load weight: 2,300 kg, Two machines for the price of one. One machine is fully operational and in good condition for its age, equipped with a collecting system (sliding slats), and the other can be made operational again with minimal effort, but the new owner can also use it for spare parts (all electrical boards are intact; the pump system and wiring system require repair). The Matra Fanuc Tape Cut W2 is a classic and extremely reliable CNC wire EDM machine manufactured in 1988. This machine combines the cutting-edge technology of the Japanese Fanuc control system with the precision engineering of the German Matra machine tool manufacturer. Hedpfx Aszcww Rsf Ssu The machines can also be purchased separately upon request. Machine requiring repair: €1500; Operational machine: €4500.

Condition: ready for operation (used), Fujitsu Fanuc A03B-0402-B001 Control Unit + A14B-0048-C00202 Power Unit + Siemens E321/21666 Control Panel, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of supply as shown in the photos. Hsdpfxji D U Rto Af Ssu

Condition: like new (used), Year of construction: 2008, operating hours: 4,322 h, functionality: fully functional, FANUC ROBODRILL α-T21iF | 4,322 hours | 24,000 rpm | BT30 FANUC ROBODRILL α-T21iF – High-Speed CNC Machining Center A very well-maintained FANUC ROBODRILL with very low operating hours – approximately 4,322 run hours. The machine was manufactured in Japan in December 2008 and is equipped with a FANUC Series 31i-Model A5 CNC control, a high-speed 24,000 rpm spindle, and fast axis movements of up to 54 m/min. The machine is in very good technical and visual condition and can be inspected and demonstrated under power by prior arrangement. Approximately 50 pcs. of BT30 tool holders of various types and sizes are included in the price. Technical specifications Manufacturer: FANUC Model: ROBODRILL α-T21iF Type: A04B-0099-B112#BM Year of manufacture: 12/2008 Country of origin: Japan CNC control: FANUC Series 31i-Model A5 Run time: approximately 4,322 hours X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 330 mm Rapid traverse X/Y/Z: up to 54 m/min Maximum spindle speed: 24,000 rpm Spindle taper: BT30 Automatic tool changer: 21 positions Hsdpoz Diqbjfx Af Ssu Maximum table load: 300 kg Machine weight: approximately 2,100 kg Power requirement: 10 kVA Power supply: 3-phase, 200/220 V, 50/60 Hz CE marked: Yes Included in the price Approximately 50 pcs. of BT30 tool holders / clamping holders of various types and sizes. IMPORTANT The rotary table / 4th axis shown installed in the machine in the photographs is NOT included in the sale. The machine is available for inspection and demonstration under power by prior appointment.

Condition: like new (used), Year of construction: 2008, operating hours: 3,088 h, functionality: fully functional, machine/vehicle number: P08ZWG962, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, feed rate X-axis: 54 m/min, feed rate Y-axis: 54 m/min, feed rate Z-axis: 54 m/min, total height: 2,336 mm, total length: 1,565 mm, total width: 2,027 mm, table width: 400 mm, table length: 650 mm, table load: 300 kg, overall weight: 2,100 kg, spindle speed (min.): 24,000 rpm, distance table center to spindle nose: 250 mm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: documentation/manual, The machine is in very good condition and has been used sparingly. It has only processed aluminum alloys. The machine comes with various tool holders, as shown in the photo – thermal tool holders, Weldon tool holders, etc., a total of 47 pieces. It also includes a probing sensor: Garant Hoffmann 359500 – a 3D digital sensor with a tactile probe. The spindle has a BT30 tool holder taper. The video shows the machine with a 4-5 axis configuration, but this is not included in the sale. Direct sale to end-users only. W-Technology s.r.o. Polní 8 Hedpfx Aezw Iv Eef Seu 79201 Bruntál Czech Republic

Condition: good (used), Year of construction: 2012, Servo drive, servo card, output module, CPU card, input processor, power pack, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit, spindle amplifier module -Manufacturer: Fanuc, Spindle Amplifier Module from CNC machining center Santenberg GTC S 2 -Type: A06B-6114-H207 -Number: 2x servo module available -Price per piece -Dimensions: 310/60/H380 mm -Weight: 4.4 kg/pc. Hedoi Sdg Iopfx Af Sju

Condition: good (used), Year of construction: 2012, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit, spindle amplifier module -Manufacturer: Fanuc, Spindle Amplifier Module from CNC machining center Santenberg GTC S 2 -Type: A06B-6110-H015 -Number: 2x servo modules available Hjdpfx Asi Sdf Hef Sju -Price: per piece -Dimensions: 285/90/H380 mm -Weight: 4.9 kg/pc.

Condition: used, Year of construction: 2009, FANUC Robodrill ALPHA T21iFa Fanuc 31i control X 500mm Y 400mm Z 330mm Tool magazine with 21 positions for BT30 tools BT30 spindle taper Spindle speed 24,000 rpm Hedpfxozrkycj Af Sou NIKKEN DD5AX-200AF 5-axis rotary table Tool height sensor on the table

Condition: good (used), Year of construction: 2012, Servo drive, servo card, output module, CPU card, input processor, power pack, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit, spindle amplifier module -Manufacturer: Fanuc, Spindle Amplifier Module from CNC machining center Santenberg GTC S 2 Hjdpfxji Sdgnj Af Ssu -Type: A06B-6111-H011#550 -Number: 2x servo module available -Price per piece -Dimensions: 285/90/H380 mm -Weight: 4.7 kg/pc.

Condition: ready for operation (used), Year of construction: 2008, A Fanuc CNC drilling and machining center is available. Travel X/Y/Z: 700mm/400mm/330mm, distance from table to spindle nose: 180mm-580mm, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, max. spindle speed: 10000rpm, spindle power: 26kW/5.5kW, torque: 35Nm/7.5Nm, feed rate: 30m/min, rapid traverse: 54m/min, tool stations: 21, tool interface: BBT30, positioning accuracy: 0.006mm, repeatability: 0.004mm, machine dimensions X/Y/Z: 2150mm/2050mm/2350mm, weight: approx. 2100kg, control: Fanuc 31i-B5, operating hours: approx. 9547h. Including chip conveyor and coolant tank. Documentation available. An on-site inspection is possible. Hjdpfx Afszlt Sne Sju

Year of construction: 2012, condition: used, Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input module, sensor/actuator module, connection, electronic module, PLC module, expansion module, plug-in card circuit board, operator panel -Manufacturer: Fanuc, plug-in card circuit board from CNC machining center Santenberg GTC S 2 Hedpfx Afokahkys Ssu -Type: A20B-2002-052 MES-1A -Extension module: Type: A03B-0815-C001 4 pcs. -Dimensions: 150/110/H30 mm -Weight: 0.2 kg

Condition: good (used), Year of construction: 2010, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2010 Control: Fanuc Series 31i-MODEL A5 Hedpsxflvfofx Af Seu Spindle speed: up to 10,000 rpm Travel X-axis: 300 mm Travel Y-axis: 300 + 100 mm Travel Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 positions Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Permissible table load: 200 kg Machine weight: 2,050 kg Power supply: 200/220 V, 3-phase, 50/60 Hz Power consumption: 1.5 kVA SCOPE OF DELIVERY Includes, among others (list not exhaustive): - CNC machining center Fanuc Robodrill α-T21iFa - 4th axis rotary table - Coolant pump and chip tray Exact scope of delivery as per photo documentation No guarantee is given for the correctness, completeness or currency of the information provided.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,294 h, functionality: fully functional, machine/vehicle number: P087WH855, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table load: 300 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 700 mm Travel range, Y-axis: 400 mm Travel range, Z-axis: 330 mm Rapid traverse speed: 54 m/min Spindle speed: 100–10,000 RPM Distance spindle–baseplate: 250–580 mm Main spindle power: 5.5 kW Table area: 650 × 400 mm Table load: 300 kg Tool positions: 21 MACHINE DETAILS Dimensions & Weight Dimensions: 1,565 × 2,027 × 2,336 mm Machine weight: approx. 2,200 kg Control system operating hours: 24,164 h Operating hours: 10,295 h EQUIPMENT Central oil interval lubrication 100 mm column extension Interior lighting 16 additional I/O Rapid traverse with bell-shaped acceleration and deceleration Manual handwheel feed Directory display from memory card 1,000 storable programs Multilingual display Thermal compensation of XYZ axes Parameter back-up function Retraction cycle for tapping without a collet MANUAL GUIDE Hodpfx Afszul Tcj Ssu Background editing Extended part program editing Coordinate system selection G92 Workpiece coordinate system G52–G59 48 additional workpiece coordinate systems G54.1 Return to reference point G28 Quick Editor Setup file Production counter Tool correction memory C for D/H code and wear Thread cutting without a collet M29 Subprogram call M98/M198/M99 Customer macro B G65, G66/G67 Drilling cycles G73, G74, G76, G81, G89/G80 Coordinate system rotation G68/G69 Circular interpolation with R programming AI Contour Control I G05.1 Helical interpolation Skip function G31 Multi-step skip G31 P1–P4 Check of travel limit before movement Check of stored travel limit 1 Check of stored travel limit 2 G22/G23 Customer PMC Real-time customer macro

Condition: good (used), Year of construction: 2011, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2011 Control system: Fanuc Series 31i-MODEL A5 Spindle speed: up to 10,000 rpm Travel paths X-axis: 300 mm Travel paths Y-axis: 300 + 100 mm Travel paths Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 stations Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Admissible table load: 200 kg Machine weight: 2,050 kg Power supply: 200/220 V, 3-phase, 50/60 Hz Power consumption: 1.5 kVA SCOPE OF DELIVERY Includes (not exhaustive): CNC Machining Center Fanuc Robodrill α-T21iFa Hodoxflxaopfx Af Sou Coolant pump and chip tray Exact scope of delivery as per photo series The Fanuc Robodrill α-T21iF machining center from 2011 impresses with its high precision and dynamic performance in a compact design. With travel paths of 300 mm in X, 300 + 100 mm in Y, and 330 mm in Z, the machine offers versatile machining capabilities. The 21-position tool changer ensures flexible production processes and minimizes setup times. The spindle achieves speeds of up to 10,000 rpm, enabling both fine machining and powerful cutting operations to be performed efficiently. The Fanuc Series 31i-Model A5 control system provides user-friendly and reliable programming. With a maximum workpiece load capacity of 200 kg and a compact construction, the machine is ideally suited for universal use in both single-part and series production. No guarantee is given for the correctness, completeness, or currency of the information provided.

Condition: good (used), Permanent magnet motor, electric motor, servo motor, spindle motor, permanent magnet three-phase servo motor -Manufacturer: Fanuc, AC Spindle Motor from Santenberg GTC S 2 CNC machining center -Type: A06B-1448-B200 -Technical data: see photo of the nameplate -Shaft: Ø 48 x 110 mm -Dimensions: 535/290/H335 mm Hsdskm Rnropfx Af Sou -Weight: 100 kg

Condition: like new (used), Year of construction: 2019, clamping force: 1,000 kN, Equipment: documentation/manual, Clamping force: 100 t Screw diameter: 32 mm Shot volume: 103 cm3 Type: Horizontal Drive: Electric FANUC Roboshot α-S100iA : Basic Technical Specifications Mechanism: Double toggle Clamping force: 1000 kN / 100 tonf _(opt. 1250 kN / 125 tonf)_ Die height double platen: 150–450 mm _(opt. 150–550 mm)_ Die height single platen: 220–520 mm _(opt. 220–620 mm)_ Clamping stroke: 350 mm Locating ring: Ø 125 mm Tie bar spacing (H×V): 460 × 410 mm Platen size (H×V): 660 × 610 mm Min. mould size (H×V): 265 × 240 mm Ejector stroke: 100 mm Max. ejector force: 25 kN / 2.5 tonf _(opt. 60 kN / 6.0 tonf)_ 1. Clamping force: 1000 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 2200 bar 4. Min./Max. mold height: 150 mm / 620 mm (extended) 5. Clamping stroke: 350 mm 6. Tie bar spacing: 460 × 410 mm 7. Ejector stroke: 100 mm 8. Screw diameter: 32 mm (103 cm³) 9. Screw/barrel: W/C (hardened, high wear and corrosion resistance, up to 350 °C, 30% GF) 10. Nozzle: Standard open R19D4 Control & Software (FANUC 31i-B CNC) 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) Hodjzktkzspfx Af Ssu 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function 6. AI mold protection function 7. AI ejector protection function 8. Backflow monitor function 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function Standard Machine Equipment 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function 7. Plasticizing speed control 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun)

Condition: good (used), Year of construction: 2011, PLC controller, connection module for digital electronic modules, terminal module -Manufacturer: Fanuc, Terminal I/O Basic Dual Module -Type: A03B-0823-C001 A03B-0823-C003 -Price/Sale: complete -Dimensions each: 140/130/H150 mm -Weight: 0.9 kg Hedpfswt Rw Hjx Af Sju

Condition: good (used), Permanent magnet motor, electric motor, servo motor, DC motor, stepper motor, spindle motor, AC servo motor -Manufacturer: Fanuc, AC servo motor with brake from CNC machining center Santenberg GTC S 2 -Type: A06B-0227-B000 -Shaft: Ø 18/13 x 30 mm -Technical data: see photo of the nameplate Hodpfx Askm Rm Rsf Ssu -Number: 2x servo motors available -Price: per piece -Dimensions: 280/130/H165 mm -Weight: 12.9 kg/pc.

Condition: excellent (used), Year of construction: 2021, FANUC ROBOCUT C400iC wire EDM machine + FANUC CRX-10iA robot, manufactured in 2021. FANUC 31i-WB CNC control. X, Y, Z LINEAR SCALES. Hodpfez Hw Hcex Af Sou AUTOMATIC DOOR. ROTARY AXIS (6th axis). CHILLER UNIT. Travel: X 400, Y 300, Z 255, U +60, V +60 mm. Maximum taper 30°/80 mm. Maximum workpiece dimensions: 730 x 585 x 250 mm. Maximum workpiece weight: 500 kg. Wire spools up to 16 kg. Wire diameters: 0.10-0.30 mm. FANUC CRX-10iA robot. VISION SYSTEM. 6 controlled axes. R-30iB Plus controller. Maximum payload: 10 kg. Maximum arm length: 1,249 mm.

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00704, load capacity: 400 kg, arm reach: 3,704 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-900iB/400L manufactured in 2016.11. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: M-900iB/400L Hedpfx Asz Hvxwef Ssu Model Number: A05B-1332-B203 Year of Manufacture Robot: 2016.11 Warranty term (months): 12   Payload (kg): 400 Reach (mm): 3704 Repeatability (mm): ± 0.1 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 3150   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2016.11 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: like new (used), Year of construction: 2019, clamping force: 2,200 kN, Equipment: documentation/manual, Fanuc FANUC ROBOSHOT Alpha S220iA (2019) _FANUC Roboshot α-S220iA – Equipment List_ _Basic Technical Specifications_ 1. Clamping force: 2200 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 1900 bar Hodjzkttcepfx Af Ssu 4. Min./Max. mold height: 250–750 mm (extended) 5. Clamping stroke: 550 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Locating ring: Ø 160 mm 8. Ejector stroke: 150 mm 9. Screw diameter: 48 mm (318 cm³) 10. Screw/barrel: W/C (hardened, high wear & corrosion resistance, up to 350 °C, 30% GF) 11. Nozzle: Standard open R19D4 _Control & Software (FANUC 31i-B CNC)_ 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function 6. AI mold protection function 7. AI ejector protection function 8. Backflow monitor function 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function _Standard Machine Equipment_ 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function 7. Plasticizing speed control 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun) 21. User manual (Hungarian) 22. Warning labels (Hungarian) _Clamping Unit Specifications_ 1. Mechanism: Double toggle 2. Clamping force: 2200 kN / 220 tonf 3. Die height (single platen): 250–650 mm _(opt. 250–750 mm)_ 4. Clamping stroke: 550 mm 5. Locating ring: Ø 160 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Platen size (H×V): 900 × 900 mm 8. Min. mould size (H×V): 375 × 375 mm 9. Ejector stroke: 150 mm 10. Max. ejector force: 35 kN / 3.5 tonf

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] Hsdezhxwujpfx Af Sju TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Type of divisor : 4e axe CNC intégré * manufacturer : Fanuc DDRT260iB - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : DROITE

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] Hjdpfx Afozhxwno Ssu - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Type of divisor : 4e axe CNC intégré * manufacturer : Fanuc DDRT260iB - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : DROITE

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Type of divisor : 4e axe CNC intégré * manufacturer : Fanuc DDRT260iB - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : DROITE Hedpfozhxxlsx Af Sou

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00705, load capacity: 125 kg, arm reach: 3,005 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/125L manufactured in 2011.11. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/125L Model Number: A05B-1329-B261 Year of Manufacture Robot: 2011.11 Warranty term (months): 12   Payload (kg): 125 Reach (mm): 3005 Hsdpfx Aez Hwapof Sou Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1190   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2011.11 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10