Used Fagor Hydraulic Press for sale (26,723)

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Iiodpfx Ajzb Il Nshysh Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm Iedetndu Ujpfx Ahyjih DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 Iijdpfx Aocmat Ushyjh pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: used, total length: 2,100 mm, total width: 1,100 mm, total height: 3,200 mm, Year of manufacture: 1976 Colour: Green Isdpfxjz R Ehwe Ahyoih Empty weight: 6.000 kg - Year: 1976 - Documentation available: Yes - Serial number: 8753 - Drive system: Conventional - Press model: C-Frame press - Press configuration: Single-acting - Press force [ton]: 63 - Max. stroke [mm]: 560 - Table length [mm]: 640 - Table width [mm]: 640 - Ram length [mm]: 555 - Ram width [mm]: 555 - Max. opening height [mm]: 350 - Transport dimensions: 2100mm x 1100mm x 3200mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 540 h, pressing force: 1,000 t, stroke length: 800 mm, reverse speed: 150 mm/s, table width: 2,300 mm, table length: 3,000 mm, total length: 4,500 mm, total width: 3,500 mm, total height: 6,000 mm, overall weight: 101,000 kg, working height: 1,300 mm, working range: 1,300 mm, Hydraulic press 1000t - in very good condition, used for stamping first series parts from progressive tools -we bought this maschine as new for 340 000 EUR in year 2019 Iiodjyilh Ispfx Ahysh

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Manufacturer: Gantenbein, Switzerland Iodpfx Ahoz Rk Nyoysih

Condition: used, Colour: Green Empty weight: 8.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 100 - Max. stroke [mm]: 250 Isdpfxjzxhxie Ahyeih - Table length [mm]: 1000 - Table width [mm]: 600 - Table bore diameter [mm]: 140 - Ram length [mm]: 300 - Ram width [mm]: 300 - Height adjustment [mm]: 250 - Column spacing length [mm]: 2000 - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,000 mm, quill stroke: 350 mm, quill travel distance: 350 mm, overall weight: 24,350 kg, input voltage: 400 V, power: 38.5 kW (52.35 HP), type of input current: three-phase, AMADA HFP 400-4L NT CNC HYDRAULIC PRESS BRAKE – 400 TONS / 4 METERS Amada HFP 400-4L NT hydraulic press brake from 2008, manufactured in France by Amada Europe. Robust and rigid machine, designed for bending thick sheet metal and large lengths in boiler making, metal construction, and industrial sheet metal fabrication. TECHNICAL SPECIFICATIONS - Manufacturer: Amada (Amada Europe S.A., France) - Model: HFP NT 400-4L - Year of manufacture: October 2008 - Serial number: B080063 - Bending force: 4,000 kN (approximately 400 tons) - Bending length: approximately 4 meters - Maximum stroke: 350 mm Iodpfxez Sva Hj Ahyjih - Machine weight: 24,350 kg - Power supply: 400/415 V – 50 Hz – three-phase - Installed power: 38.5 kW - Rated current: 67 A - Sound level: less than 75 dB(A) - CE marking NUMERICAL CONTROL - Original Amada AMNC PC control system - Programming screen mounted on a pivoting arm - Remote electronic handwheel for fine adjustment (x5 function) - Control panel with emergency stop and test mode - Floor-mounted control pedal SAFETY - Fiessler AKAS laser safety barrier, with AKAS II-3M receiver - Operator hand protection as close as possible to the punch - Closed protective grating at the rear of the machine BACK GAUGES - Motorized back gauges controlled by the numerical control system - Guided by ball screws and linear rails - Repeatable sheet metal positioning INCLUDED TOOLING - Segmented punches and dies mounted on the machine - Additional set of dies, punches (including Eurostamp), and accessories, on a pallet and in a crate CONDITION Machine located in an active workshop, complete equipment (control, safety barrier, back gauges, tooling). Paintwork worn, consistent with industrial use. SALES CONDITIONS - Location: Netherlands - Incoterm: EXW Dordrecht (negotiable) - Disassembly, loading, and transport are the responsibility of the buyer - Availability: from November 3, 2026 - Inspection possible by appointment

Condition: used, total length: 2,000 mm, total width: 1,750 mm, total height: 2,850 mm, Year of manufacture: 1967 Colour: Grey Empty weight: 6.000 kg Isdpozry Icjfx Ahyeih - Year: 1967 - Documentation available: No - CE certificate present: No - Serial number: 1166 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 250 - Table length [mm]: 740 - Table width [mm]: 500 - Ram length [mm]: 250 - Throat depth [mm]: 350 - Transport dimensions: 2000mm x 1750mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request Isdpfou Axfcjx Ahysih -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: used, Heavy-duty hydraulic hole-press, perforated panel press or gluing press for gluing or securing workpieces such as frames, panels, windows or doors. Technical data: - Cylinders: 6 Isdpfxozryy Ss Ahysih - Hold-down units: 3 - Pressing area: 260 x 145 cm

Condition: like new (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 100 t, stroke length: 500 mm, operating speed: 400 mm/s, reverse speed: 450 mm/s, table width: 1,250 mm, table length: 630 mm, table height: 860 mm, throat depth: 360 mm, ram plate width: 850 mm, ram plate length: 450 mm, distance table to ram: 800 mm, retraction force: 1.6 t, total length: 2,300 mm, total width: 1,865 mm, total height: 3,650 mm, overall weight: 7,000 kg, year of last overhaul: 2026, controller manufacturer: SIEMENS, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic C-frame press ZEULENRODA | 100t | Retrofit system from 2026 with CE conformity + manufacturer's warranty --3 units available | short delivery time-- HIGHLIGHTS - Press frame in steel welded construction for maximum stability and rigidity - Press force 1,000 kN | adjustable based on stroke and pressure - Clamping area, table 1250 x 630 mm - Ram stroke 500 mm - infinitely adjustable - Ram plate with anti-rotation protection and guided by columns - Rapid traverse and short stroke function - Active oil cooling - Hydraulic ball-type quick-release couplings for safe and fast tool changes - Protection on the operator side via light curtain, on the side and rear via safety guard - SIEMENS control + touch panel - Interface for automation - Comfortable operation with BWS-1 cycle + BWS-2 cycle - Remote maintenance - CE conformity + manufacturer's warranty Ram column guidance: - Two diagonally arranged guide columns each. They also serve to prevent the ram plate from twisting. Hydraulic equipment: - Oil tank, hydraulic control / pump completely installed and ready for operation with all required pipelines, pumps and valves as well as the control units. - Electronic stroke measurement system - Stroke control: stroke-dependent - pressure-dependent - stroke-pressure-dependent - Option for setting a press time of 0 ... 10 minutes Safety: - BWS / light curtain on the operator side - Transparent protective elements on the sides, movable - Retraction lock (interlock) - Hydraulic and electrical safety devices in accordance with DIN EN 16092-3 Control / Operation: - SIEMENS - Touch panel control unit as a lift console (height adjustable) - Standing two-hand control unit - 100 storable tool data sets - Transfer of stroke parameters using the teach-in method - Various password levels - ... Iodpfx Ahez Hcz Soyoih Operating modes of the press - Off - Setup / Two-hand - Single stroke / Two-hand - Single stroke BWS 1 cycle / 2 cycle - Master / Combined operation / Automation Tool control / protection - 6 x tool cams (24V / 2A outputs), freely programmable - Electronic tool protection with 8 inputs, freely configurable Remote maintenance (eWON Cosy) Service & Support ZEULENRODA PRESSTECHNIK

Condition: excellent (used), Year of construction: 1985, For sale: MÜLLER HEP 10.20.35 hydraulic press, manufactured in 1985. The press was in very good working condition until recently. It underwent an inspection in 2023. Iiedpfez Saqqex Ahyeh

Condition: excellent (used), functionality: fully functional, PYE 250 S1 hydraulic press. Iisdez Tc U Topfx Ahyoh

Year of construction: 2014, condition: not inspected (used), functionality: unexamined, machine/vehicle number: 10150, General Description For sale is a professional assembly press manufactured by the Spanish company Enginyeria Teknics Sabadell, S.L. This unit dates back to 2014 and is factory-designated as "PRENSA REAR WAVE 2". The machine is equipped with an advanced electromechanical actuator (pressing module) from KISTLER, with a nominal pressing force of 60 kN. This system is designed for precise pressing, assembly, and force testing processes in industrial applications. Technical Data (TEKNICS Press) Manufacturer: Enginyeria Teknics Sabadell, S.L. (Spain). Machine Number: 10150. Serial Number: 338.003 6775. Year of Manufacture: 2014. Power Supply: 400 V / 50 Hz. Power: 25 kW. Required Pneumatic Pressure: 6 bar. Machine Weight: 800 kg. Certification: CE marking. Technical Data (KISTLER Actuator) Iedpsz Rz Rhofx Ahyoih Manufacturer: KISTLER (Dr. Steiger Mohilo+Co GmbH). Type: 2151B60304002. Model: NCFH 60 400 300 B H C G. Nominal Force: 60 kN. Serial Number: 2683373. Actuator Weight: 87 kg. Certification: CE marking. Construction and Equipment Stable construction with a dedicated protective enclosure consisting of black mesh panels and yellow profiles. The operator's work area is protected by optical safety barriers (light curtains). The work area features a massive mounting plate with threaded holes and a set of tools, dies, and adapters to facilitate part positioning. A free-standing control cabinet is included with the press. The cabinet door houses the operator panel (HMI) with a display, the main power switch, and an emergency stop button.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, pressing force: 100 t, stroke length: 270 mm, oil tank capacity: 400 l, total length: 1,200 mm, total width: 1,100 mm, overall weight: 7,500 kg, year of last overhaul: 2026, LAUFFER double-acting hydraulic press, 100/30 tons. The press has been completely refurbished and has not been used. I am also including 400 liters of hydraulic oil, so it is ready for use. For more information and a video demonstrating its operation, please contact the phone number provided. Iedpfx Ahjz Hc A Neyjih

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK Iodegrkigepfx Ahyeih (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Iijdpfjz Snrnox Ahyjh Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Working medium: filtered compressed air Noise level: below 75 dB Control: foot pedal The machine is sold with the table shown in the pictures.

Condition: excellent (used), Year of construction: 1962, functionality: fully functional, pressing force: 200 t, stroke length: 800 mm, table width: 970 mm, table length: 1,600 mm, year of last overhaul: 2022, die cushion force: 40 t, Equipment: safety light barrier, Lasco FP 222 S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Lasco FP 222 S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Iodpfxsv E Efdo Ahyeih Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), For sale: a Lukas press in very good condition. Iiodpfxoz Sb N Ij Ahyeh

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 5 t, table width: 400 mm, table length: 340 mm, overall weight: 500 kg, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Manufacturer JAM HYP-505H model Model year 1990 Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressing speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate oil cooler Voltage 3 phase 200v 1.5kw 10A Iisdpfx Aov Sd S Nohysh Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 461/08, functionality: fully functional, For sale: Energo hydraulic NC press - Type: GTVS 400 NC Iiedpfx Ahez Iymnsyjh - Year of manufacture: 2008 - Serial no.: 461/08 The hydraulic press is in like-new condition. It has 5,000 operating hours and has been used at minimal pressures, with a maximum force of 50 tons. It has been regularly serviced by the manufacturer, Energo. It offers high precision, with a ram depth accuracy of 0.01 mm and the capability for multi-step simultaneous programming, allowing you to set the depth, pressure, and pressing speed. It is connected to the power supply and ready for operation.

Condition: good (used), Year of construction: 1979, functionality: unexamined, pressing force: 40 t, overall weight: 5,000 kg, Equipment: safety light barrier, SHC 40 Hans Schoen Iiedpfoz S E S Sjx Ahyoh

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 697/2, Equipment: 4th hydraulic function, Hounsell Engineering 50 Tonne 4-Column Hydraulic Press – 1997 We are pleased to offer this Hounsell Engineering Ltd (UK) 50-tonne 4-column hydraulic press, manufactured in 1997. A substantial, British-built industrial hydraulic press with heavy-duty construction, previously used in a production environment and now available for sale due to surplus requirements. Suitable for a wide range of pressing, forming, assembly, fabrication, maintenance and general engineering applications. Machine specification: Manufacturer: Hounsell Engineering Ltd, UK Type: 4-Column Hydraulic Press Rated capacity: 50 tonnes Year of manufacture: 1997 Machine / Serial No.: 697/2 Stroke: 200 mm System pressure: 250 bar Pump motor: 5.5 kW Electrical supply: 415 V Control voltage: 110 V Hydraulic fluid: Texaco HD 32 Construction: Heavy-duty industrial steel Condition: Very good used condition The press was in service prior to removal and is being offered for sale as surplus equipment. With a rated capacity of 50 tonnes, the machine is capable of generating approximately 500 kN of compressive force, making it suitable for a broad range of industrial and workshop applications. Condition & Inspection The machine is offered in good used condition. Prospective purchasers are welcome and encouraged to inspect the press before purchase to satisfy themselves as to its condition, specification and suitability for their intended application. Sold as seen. No warranty is given or implied. Collection & Loading Isdpfx Ahjz Ib R Ijysih Location: Kent, England, UK Collection only due to the size and weight of the machine. Loading assistance may be available by prior arrangement. Further photographs and information can be provided, including serial plate details, overall dimensions, weight and loading arrangements. A good opportunity to acquire a substantial 50-tonne industrial hydraulic press at considerably below the cost of a comparable new machine. Please contact via the links within for further details, photographs, or to arrange an inspection. Many Thanks, Search terms: Hounsell Hydraulic Press, 50 Tonne Press, 4 Column Press, Hydraulic Workshop Press, Industrial Press, Engineering Machinery, Pressing Machine, Forming Press, Manufacturing Equipment, Fabrication Machinery.

Year of construction: 1986, condition: good (used), functionality: fully functional, machine/vehicle number: 540, SANDT 540 – 50 Ton Hydraulic Double-Column Press – 1350 × 600 mm Good quality German-built SANDT 50-ton hydraulic press, now available from our premises in Kent, England. A substantial industrial machine offering a large 1,350 × 600 mm working area, approximately 500 mm maximum stroke and 680 mm installation height. Suitable for a wide range of industrial cutting, die-cutting, punching, forming and manufacturing operations. Specification: 50-tonne press force 1,350 mm column width 1,350 × 600 mm table Iisdpfx Aez Icrtjhyoh 1,350 × 600 mm ram Approx. 500 mm max. stroke Approx. 680 mm installation height 400 V Safety light curtain Separate hydraulic power pack Separate electrical cabinet Approx. 3,000 kg Approx. dimensions: 3,000 × 1,200 × 2,800 mm Manufacturer: SANDT Model: 540 Year: 1986 Machine No.: 808673-72951 Price: £5,000 or best offer Machine can be inspected in Kent, England. Buyer to arrange collection/transport. Please contact via the links within for further details, photographs, or to arrange an inspection. Many Thanks,