Used Evv Sv-63P for sale (872)

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Ijdpfoyqr Sxex Akxoia

Condition: excellent (used), I am offering a vacuum pump from the renowned brand BUSCH, model SV 1016 B. The device is fully functional – tested and ready for operation. Technical data: • Model: SV 1016 B • Manufacturer: BUSCH • Country of production: Switzerland • Ultimate pressure: 150 mbar • Serial number: NH00770105 • Type: vacuum pump for air and gases Applications: • vacuum installations • vacuum packaging Iiodpeyxgmzefx Akxsa • industry • production machinery Condition: The item was used, shows normal signs of use, and is in good technical condition. Fully operational. Included in the set: • BUSCH SV 1016 B pump • connection as visible in the photos

Condition: excellent (used), I am offering a vacuum pump from the reputable brand BUSCH, model SV 1025 B. The device is fully functional – tested and ready for operation. Technical data: • Model: SV 1025 B • Manufacturer: BUSCH • Country of manufacture: Switzerland • Ultimate pressure: 120 mbar • Type: vacuum pump for air and gases Applications: • vacuum installations • vacuum packaging • industry • production machinery Condition: The item is used, shows normal signs of use, and is in good technical condition. Fully operational. Included in the set: Isdpfxeyxgc Ae Akxoia • BUSCH SV 1025 B pump • visible installation/connection

Condition: good (used), 10 secondhand bins available. Currently 760 new bins available. Ijdpfx Aksq Ih H Ejxoia

Condition: used, functionality: fully functional, total length: 1,750 mm, total width: 2,600 mm, total height: 2,150 mm, overall weight: 1,280 kg, tank capacity: 2,800 l, The Dorit VV-6-1401 Vacuum Churn is designed to improve the quality of meat products by facilitating the marinating and tenderizing process. Made of stainless steel, it ensures durability and hygiene, while allowing for simplified front loading and unloading. Thanks to its automatic discharge system, the front-to-rear transition is seamless, optimizing production efficiency. The machine offers advanced features such as a programmable timer to manage processing times and settings for speed, program, and vacuum. Built-in gauges monitor vacuum and operating status, ensuring consistent results. This churn is ideal for meat marinating operations, allowing for even absorption of salts and marinades, while increasing production capacity thanks to its varied programs. Dorit Vacuum Meat Tumbler Stainless steel construction Front loading and unloading Automatic unloading when switching from front to rear Programmable interval timer for controlling total time, massage, and rest interval Setting switch for speed, program, and vacuum Ijdpfxsu E Ip As Akxjia Gauges for vacuum and operating status Voltage: 400 V three-phase Frequency: 50 Hz Drum volume: 2800 L / Maximum capacity: 1400 kg Dimensions (d x w x h): 1750 x 2600 x 2150 mm Net weight: 1280 kg rjmpaoh5

Condition: good (used), machine/vehicle number: WMA18SZZ8GM685543, mileage: 195,000 km, power: 265 kW (360.30 HP), fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: ABS, air conditioning, differential lock, electric window regulation, power mirror, Technical information Engine capacity: 10.518 cc GVW: 19.120 kg Drivetrain Make of engine: MAN Axle configuration Front axle: Tyre size: 385/65R22.5; Suspension: leaf suspension Rear axle 1: Tyre size: 315/70R22.5; Suspension: air suspension Rear axle 2: Tyre size: 315/70R22.5; Suspension: air suspension Interior Steering wheel placement: Left Condition Technical condition: good Visual appearance: good Other information Vehicle's outer dimensions: 10,15x2,54x4 Production country: NL Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information = Additional options and accessories = - Cabin suspension - mechanical - Differential lock - Driver seat air-cushioned - Heated mirrors - PTO Iijdpfsyt A Txjx Akxsa - Stereo = Remarks = The BLG road cleaner is suitable for use in emergencies and for performing preventive maintenance on specific road surfaces where a standard sweeper is not powerful enough. In Europe, for example, many roads are covered with ZOAB or other types of open concrete surfaces. Due to the open structure of these surfaces, dirt accumulates in the cavities. Other cleaning methods, such as sweeping or brushing, only “push” this dirt deeper into the cavities. This results in a very slippery road surface, especially in changing weather conditions. Because our road surface cleaner sprays the dirt loose under high pressure using dirt cutters and sucks everything up with the powerful fan, the draining effect of the road surface is maintained. This also makes the vehicle very suitable for effectively cleaning up oil and other serious contaminants such as paint. The advantages of the BLG road cleaner 2.5 m wide suction nozzle with two suction hoses Very powerful fan with a capacity of 20,000 m3/hour Hydrostatic drive for optimum ease of use Autonomous thanks to the use of water recycling The suction nozzles can be tilted independently Equipped with a coarse debris filter Pump section equipped with sound insulation Equipped with brush-in system and HD system For very intensive road cleaning, we have developed a powerful road cleaner that cleans using high-pressure and vacuum technology. With a water supply of approx. 9 m³ and the use of water recycling, it offers a very high degree of autonomy. The combined clean and dirty water tank is made of 4 mm thick stainless steel. The dirty tank is emptied via the rear cover, which is also made of stainless steel and opens upwards by means of two cylinders. The BekkerLaGram road cleaner can be found on industrial sites, motorways, airports, factory sites and much more.

Condition: good (used), Year of construction: 2009, lifting height: 6,100 mm, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 1.810 kg Functional Lifting capacity: 360 kg Working height: 810 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Transport dimensions (LxWxH): 2,21x0,71x1,72 Production country: JP Additional information Please contact Christian Theißen for more information Manufacturer: Aichi Model: SV06CNL Year of build: 2009 Condition: Used Data: Max. working height: 8,10 m Max. platform height: 6,10 m Drive type: Battery Platform dimensions LxW: 2,21 x 0,71 m Length of the platform extension: 1,00 m Lifting capacity: 360 kg Lifting capacity on extension: 120 kg Total dimensions LxW: 2,30 x 0,80 m Height transport position with railing: 2,125 m Height transport position without railing: 1,715 m Max. Wheel load: 800 kg Gradeability: 25% Max. permissible longitudinal tilt angle: 3° Max. permissible cross slope angle: 1,5° Empty weight: 1.810 kg Special features: weiße Reifen, Anschlagpunkte für Rückhaltsysteme(PSA) vorhanden, nur Inneneinsatz Information: 3057 + 3058 Electrical problem, 3078 Emergency stop contactor missing. Location: 41468 Neuss Iijdpfx Akov Tib Soxoa immediately available

Condition: used, Year of construction: 2012, lifting height: 12,100 mm, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 1.810 kg Functional Lifting capacity: 360 kg Working height: 810 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 2,3x0,8x1,71 Production country: JP Additional information Please contact Christian Theißen for more information Manufacturer: Aichi Model: SV06CNL Year of build: 2012 Isdpjv Tibrofx Akxeia Condition: Used Data: Max. working height: 8,10 m Max. platform height: 6,10 m Drive type: Battery Platform dimensions LxW: 2,21 x 0,71 m Length of the platform extension: 1,00 m Lifting capacity: 360 kg Lifting capacity on extension: 120 kg Total dimensions LxW: 2,30 x 0,80 m Height transport position with railing: 2,125 m Height transport position without railing: 1,715 m Max. Wheel load: 800 kg Max. climbing capacity: 25% Max. permissible longitudinal tilt angle: 3° Max. permissible cross slope angle: 1,5° Own weight: 1.810 kg Special features: white tires, attachment points for restraint systems (PSA) available, only for indoor use Information: Suitable transport trailer upon request for an additional charge of €2,999 Information: 3061 Charger missing, error message present, driving, steering, lifting without function. Location: 41468 Neuss immediately available

Year of construction: 2000, condition: reconditioned (used), Stock - No.: 2107 Iiedpsiyyc Esfx Akxja 1 used, partly overhauled and functionally tested strand-pelletizer COMAC Type SG-100 SV infeed width 100 mm Cutting Rotor width 110 mm, parallel cut with 32 teeth Rotor- Ø 200 mm >> strand-pellet cutting length adjustment 2 drives: 1x for cutting-Rotor - 4 kW 1x for infeed-roller 1,5 kW with STÖBER reduction-speed gear Noise protected housing of pelletizing Chamber Inspection visit / trial-run shortly by appointment possible. We can also offer suitable strand-cooling bath, strandb-blower or pellet classifier ex stock. More strand-eplletizer and other pelletizing systems/units ex our stock availabe ( waterring - , hot-face- and underwater pelletizing )

Condition: used, machine/vehicle number: 14039, Rotor diameter: 260 mm Rotor width: 410 mm Ijdpfx Aoyr Tzkokxeia Rotor knives: 3 Stator knives: 2 Infeed opening approx.: 410×600 mm Drive motor: approx. 11 kW

Condition: used, Year of construction: 1998, x-travel 1.020 mm y-travel 510 mm z-travel 510 mm control MSC 501 Fanuc table surface area (APC) 1.200 x 480 mm max. table load (APC) 550 kg turning speed range - milling 10.000 U/min power capacity - milling spindle 22 / 18,5 kW tool taper BT 40 number of toolpositions 30 pos. tool taper BT 40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg rapid traverse 32 m/min feed 1 ~ 16.000 mm/min Ijdpfsy Apcysx Akxoia Tipp feed 0 ~ 1.260 mm/min spindle bearing diameter 85 mm total power requirement 59,5 kVA weight of the machine ca. 6,9 t dimensions of the machine ca. 3,9 x 2,7 x 2,9 m CNC - Machining Center - Vertical MORI SEIKI - SV 500 B/40 - Clamping devices are NOT included in the scope of delivery

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Travel : 310 [mm] - Spindle speeds : 280 - 7.000 [rpm] - Spindle power : 7,5 [kW] - C axis indexing precision : 0,01 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Z stroke : 150 [mm] - Spindle speeds : 280 - 7.000 [rpm] - Spindle power : 3,7 [kW] - C axis indexing precision : 0,01 [°] - Number of turrets : 1 UPPER TURRET - Number of positions : 10 - Number of motorized positions : 10 Iiedpsuha Elefx Akxoa - Live tools speed : 5.700 [rpm] - Live tools power : 2,8 [kW] GUIDE BUSH HOLDER 1 - Number of positions : 4 - Number of motorized positions : 3 - Live tools speed : 6.000 [rpm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 8 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.645 x 1.403 [mm] - Machine height : 1.680 [mm] - Machine weight : 3.880 [kg] EQUIPMENT - CNC : Fanuc 16 iTB - 3 colors status lamp - Parts catcher - Parts conveying strip - Chips conveyor - Coolant tank - Bar loader : IEMCA BOSS 432/32LL - Electric transformer

Condition: used, Year of construction: 1999, bore capacity in steel (diameter) 36 mm throat 300 mm bore stroke 160 mm 4 speeds 100 - 1600 U/min column diameter 145 mm table-size 500 x 370 mm total power requirement 2,2 kW weight 440 kg dimensions 1200 x 800 x 2300 mm comes from a vocational school Features: - automatic feed - infinitely variable speed control - digital speed display - adjustable drilling depth stop - drill spindle guard Iiedpfx Akjy Agpqsxsa

Condition: used, Column Drilling Machine ALZMETALL Type AB 25 SV Machine No. 3456 Year of manufacture: 1993 Drilling capacity: 25 mm Spindle taper: MT 3 - long quill Iijdpfx Aksyz Dr Hoxja Throat depth: 290 mm Quill stroke: 160 mm Table size: 510 x 300 mm Column diameter: 115 mm Spindle speed: 65 - 1750 rpm, stepless adjustment Automatic feed: 0.15 mm/rev Motor power: 0.9 and 1.3 kW, pole-changeable Power supply tested: 400 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless adjustment via variator drive - Intermediate gear stage for high torque at low speeds - Spindle speed indicator - Coolant system - Table height adjustment by hand crank - Foot switch for spindle ON/OFF - Emergency stop push button - Lighting unit - Machine base with machined workpiece support surface - Quick-action drill chuck ALBRECHT 1 to 13 mm Space requirement (L x W x H): 1200 x 650 x 1900 mm Weight: 400 kg Very good condition

Condition: ready for operation (used), Year of construction: 2007, A vertical cross grinding machine Sunnen is available. Bore diameter range: 3mm-65mm, max. workpiece length: 250mm, working area dimensions X/Y/Z: 150mm/150mm/150mm, slide speed range: 0.001mm-0.8mm/s, stroke rate range: 30-400, spindle speed: 4000rpm, feed force: 3800N, grinding oil tank volume: 280l. Machine dimensions X/Y/Z: approx. 2150mm/2200mm/2900mm, weight: approx. 2200kg, operating hours: approx. 5000h. Including indexing table and grinding oil tank with magnetic separator and filter. Documentation available. An on-site inspection is possible. Isdpfx Aey Ax Tnekxoia

Condition: repair required (used), with two-sided cutting width adjustment, as spare parts carrier, frame width 705 mm, stroke 600 mm Iodpjmqkr Dofx Akxjia

Condition: used, Year of construction: 2015, Please contact Theo Lelie for more information MAFI 3H 36 V Gooseneck 36 ton loadingcapacity Bj 2015 Iiedpfx Aoyzyp Ujkxsa

Year of construction: 2004, condition: used, Conveyor tower Ambaflex / Kolbus SV-400-1800-HS / XAF 660 Year: 2004 Description: Iijdpfxjyyb Rwo Akxsa - Straight delivery

Condition: used, Year of construction: 1993, pressure 80 t throat 280 mm stroke 10 - 140 mm Stroke rate 85 / min Distance table/ram, max. stroke up, adjustment up 380 mm Table surface area 850 x 560 mm Hole in the table 300 x 200 mm Table height above floor 790 - 950 mm Ram surface 420 x 210 mm Ram adjustment 60 mm Power capacity 4,0 kW Iiodpfxsyx Ikue Akxoa Weight 4,5 t Dimensions (WxDxH) 1,3 x 1,4 x 2,45 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, rolling-key clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual centralized lubrication, foot operation can be inspected in running condition in our warehouse

Condition: new, Year of construction: 2021, functionality: fully functional, !Machine like new, only 600 hours! HEIDENHAIN 640 Iedswx Nkcjpfx Akxeia Table 1300X700 X, Y, Z: X=1220 Y=710 Z=630 Spindle revolutions 60-10000 24 positions tool changer. Machine dimesnions 3200 X 3900 X 2490 Machine weight 9500 KG

Condition: ready for operation (used), * Brand: Mogensen Iiodpfx Akjywm Amexja * Model: bar sizer * Type: SV 1526 * with: 2 decks * Driving: 2 pieces vibration motors of each 2,7 kW.

Condition: used, Year of construction: 1978, machine/vehicle number: 455 178, pression: 45 t Iisdpfx Aodd Irgokxsa throat: 230 mm table size: 460 x 690 mm clearance hole in the die: 175 x 220 mm table adjustment: 160 mm tappet area: 185 x 360 mm tappet adjustment: 55 mm stroke adjustment: 4 - 80 mm number of strokes: 120 /min engine: 380 V, 3 kW space needed: 1800 x 1100 x 2100 mm weight: 2800 kg

Condition: used, Year of construction: 1999, functionality: limited functionality, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC501, table width: 1,100 mm, table height: 500 mm, table load: 800 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, Manufacturer: Mori Seiki Model: SV-500/40 Dimensions: - Length: 2,350.0 mm - Width: 2,336.8 mm - Height: 2,844.8 mm Weight: 6,600.0 kg Axis travel distances: - X-axis: 800 mm - Y-axis: 510 mm - Z-axis: 510 mm Table dimensions: - Length: 1,100 mm - Width: 600 mm Maximum workpiece weight: 1,000 kg Number of tool stations: 20 Ijdpfxsyymt Dj Akxsia Maximum spindle speed: 10,000 RPM Spindle motor power: 22.4 kW Advantages: - High precision and accuracy due to advanced construction and design. - Versatile machining capabilities with a maximum spindle speed of 10,000 rpm, allowing efficient processing of various materials. - Robust construction with a significant weight of 6,600 kg, ensuring stability during operation. - Generous tool storage with 20 tool positions, enabling quick tool changes and increased productivity. - Capable of handling heavy workpieces up to 1,000 kg, making it suitable for large-scale production tasks.

Condition: good (used), functionality: fully functional, electrical fuse: 16 A, input frequency: 50 Hz, input voltage: 400 V, power: 2 kW (2.72 HP), funnel diameter: 650 mm, ejection height: 1,100 mm, type of input current: three-phase, DGUV certified until: 04/2027, overall weight: 500 kg, Scheurer SV 140 E Weighing Machine LED display for weight adjustment Ijdpfx Aeyaki Iskxjia with central lubrication robust technology machine mobile with 2 wheel locks Mehler conveyor belt discharge belt, height adjustable, long connection: 400V, 16A CEE plug Used machine Option: Maintenance contract Spare parts box Service package Delivery service Training & commissioning Visit our large exhibition!

Condition: new, 20 mm 40 mm MK 4 spindle stroke 160 mm throat 300 mm column diameter 145 mm 615x430 mm 2x14x224 mm distance spindle /table 147/688 mm feed 0,1-0,2-0,3-0,4 mm/U 140-4000 U/min. total power requirement 4,0 kW Machine height 1885 mm Standard equipment: - Electromagnetic feed clutch with overload protection and electrical    Cross Handle Switches - Control and light transformer - Main switch lockable - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Clockwise rotation by contactor control - Speed adjustment stepless - Speed display digital - Speed setting electrically Iiodpfx Aksyv Nxbsxea - Protection IP 54 - Motor insulation class "F" - Spindle protection with electrical protection