Used Eubama Rotary Transfer Machine for sale (68,012)

Year of construction: 1988, condition: used, Eubama S5 Rotary Transfer Machine Gusdpfxsdg Da Ie Af Tjh Serial Number 5531 Year 1988 Pristine Condition Not been used for 15 years

Condition: ready for operation (used), Two identical rotary transfer machines Eubama including filtration systems are available. Workpiece diameter: 60mm, workpiece length: 320mm, clamping stations: 10, cycle rate: 20/min, spindle stroke: 100mm, drilling capacity steel/brass: 20mm/30mm, threading capacity steel/brass: M30/M40. Documentation available. An on-site inspection is possible. Guedpfew Hglmjx Af Tsh

Condition: good (used), Horizon RD-4055 Rotary Die Cutting Machine The machine is in perfect condition, has low mileage, and is ready to work. Machine setup is via the control panel. Made in Japan. The set consists of: – FFU-4055 sheet feeder – RD-4055 rotary die cutter with double magnetic cylinder (top and bottom) – SPC-4055 separator Manufacturer’s description: – Cost reduction thanks to multiple die reuse, – Machine operation via TOUCH & WORK touchscreen, – Short machine setup time, – Precision and excellent final product quality, – Very easy and quick die assembly on the magnetic cylinder Technical data: – Maximum sheet size before processing: 400 x 550 mm Gjdpfxoz R Iq Us Af Teuh – Minimum sheet size before processing: 200 x 275 mm – Processed material: standard paper, coated paper, and cardboard – Material thickness: 188 to 400 g/m² – Feeder stack height: 500 mm – Production speed: 6,000 cycles per sheet hour Factory set of tools and accessories, instructions.

Condition: excellent (used), Year of construction: 1995, High-performance rotary transfer machine, specifically designed for the mass production of medium and large-sized parts. Thanks to reduced production times, high precision, and reliability, it contributes to greater efficiency in the mechanical machining sector: it can perform up to 15 machining operations, transverse machining operations, or front-side machining operations on both sides. Gsdjznnpmjpfx Af Touh

Condition: ready for operation (used), Length: 8225mm, width: 3200mm, with documentation. Gsdpfx Afsi Ew Dpo Teuh

Condition: ready for operation (used), A complete Winema CNC rotary transfer production line including interlinking, peripherals and a washing system is available. 1) Winema RV20 Flexmaster rotary transfer machining center, stations: 6, machining positions: 12, max. material passage: 42mm, internal thread 1: M16x1.5, internal thread 2: M20x1.5, holes: 8.7mm/15mm/17mm/18mm, reaming: 9mm/15mm/18mm, cycle time: approx. 7s, throughput capacity: approx. 500parts/h, control system: Siemens Sinumerik 840D. 2) Winema bar loading magazine, tube support: 800mm, max. tube thickness: 2mm, max. bar length: 3200mm. 3) Knoll Turbofilter coolant cleaning system, dirty tank volume: 500l, clean tank volume: 150l, filter fineness: 50mm. 4) Knoll cooling unit, cooling capacity: 15kW, max. oil temperature: 30°C. 5) UAS oil mist extraction system, separation efficiency: 96%-98%. 6) Interlinked continuous washing system with automatic parts transfer. 7) Hydraulic system. 8) Conveyor units. 9) Fire extinguishing system. This is a complete and interlinked system for NC control valve production. The production of additional components can presumably be set up. Documentation available. An on-site inspection is possible. Godpfx Afszbl N Se Touh

Condition: ready for operation (used), Year of construction: 2002, Stations: 6, power: 40kW, control: Siemens. Including upstream Fischer separating head, Festo feeder, material discharge conveyor, Knoll 450K-1 chip conveyor, year of manufacture: 2004, chip preparation with ejector and hydraulic unit. Documentation available. On-site inspection is possible. Gusdpfx Aou T Rhbsf Tsh

Condition: used, Year of construction: 2006, machine/vehicle number: HB45, functionality: fully functional, Year of manufacture 2006 / revision 2009 Connected load 40 KW Machine weight 9650 kg Processing units 12 horizontal 12 vertical 6 Total units 18 Godpfxevt Umme Af Teuh Circular indexing 0.7 seconds Number of collets 12 Type B45 Maximum clamping 45.00D diameter Length of workpieces max 170 mm Hydraulic unit 10L/Sp-30ccm/4Kw/NG 150 Control cabinet / gallows + pendant control OP 10C Loading magazine 4.20 M Platform Coolant system Exhaust nozzle Stairs

Condition: ready for operation (used), Year of construction: 1994, Stations: 24, substations: 20, side stations: 20, axes: 2/station, collets: 24, production output single/double cycle: 120/240 pieces/min, stroke: 35mm, max. workpiece diameter: 25mm, spindle speed: 20000rpm, machine weight: approx. 2650kg, control: Mikron MAC 50, operating hours: approx. 17335h. Documentation available. An on-site inspection is possible. Gedew Emx Rjpfx Af Teuh

Condition: good (used), Year of construction: 2002, The EUBAMA S6 is a 2002 model bench-type machine. Number of clamping (jaw) stations: 8 2-jaw chuck system Maximum clamping diameter: 40 mm Maximum workpiece length: 330 mm Maximum output (cycles/minute): 40 Guedpfx Afsv Ef N As Tsh Hydraulic clamping system Machine control: CNC Siemens SINUMERIK Number of processing units: 15 FMB MT/42/4200/B driver magazine Magazine loading capacity: 4.2 meters KNOLL chip conveyor KNOLL coolant tank (VRF 250/1250) The machine is in working condition.

Year of construction: 2015, condition: ready for operation (used), Max. workpiece diameter: 42mm, connected load: 132kVA, length: 4600mm, width: 7500mm, height: 3000mm, with bar loader. Gedpfep S Sq Djx Af Teuh

Year of construction: 2006, condition: ready for operation (used), This EUBAMA S6 rotary transfer was manufactured in 2006. It features a robust base frame, hydraulic fittings, a Stöber servo motor with planetary gearbox, and a milling unit with NC feed. Ideal for precision, it also includes a face turning head and a length control system with a pneumatic cylinder and laser. Contact us for more information about this machine. • Base frame • Accessories for base frame • Hydraulic fittings • Unit carrier (left) TK420 • 108 bores • Pipe (coolant return) • Flange shaft with face gearing • Stöber servo motor with planetary gearbox • Limit switch monitoring • Protective hood • Form turning unit - material guide • Guide axis • Cover plates with empty stations • Milling unit with NC feed • Clamping with toothed belt pulley z1=16 • Toothed belt pulley Z1=16 • Toothed belt pulley Z2=20 • Toothed belt 25 AT10 / 730 • Hydraulic power unit 70 100 04358 32 dm³/min • Central lubrication • Deflection plate T - T Additional equipment • Part ejection console • Straightening and feed rollers • Clamping change parts station 1 • Tools and tool holders • Operating tools S6 • Ejector with gripper • Clamping jaws (plates) • Press-in unit for internal hexagon socket • Face turning head PCD 100-01-101 • Length control with pneumatic cylinder and laser • Reel support (Star cross) • Extension (coil height) Guodpfox D If Tex Af Teh • 2-jaw chuck • Pneumatic accessories (for 4 cylinders) • 24-volt filling unit integrated with emergency stop valve • DA 300 compressed air maintenance system

Condition: excellent (used), For sale: a CNC rotary table from the renowned Fadal Engineering (USA) brand, model VH65. A professional 4th axis designed for machining centers, especially Fadal VMCs, but it can also be integrated with other CNC machines using a suitable controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multi-pin connector • Serial number: 4630298 Condition: used, mechanically sound, with normal signs of wear. Solid and heavy construction – ideal for precise 4-axis machining. Gsdsz Slc Sjpfx Af Tsuh

Condition: ready for operation (used), Year of construction: 1997, A rotary transfer machine for the production of spherical ladles is available. Machining stations: 13, bar loader: 0433, bar loader length: 3000mm, machine power: 40kW, control: Hydromat. Including Bosch hydraulic unit, Knoll 450K-1 chip conveyor, Müller CL206-B lubricant preparation system and separate Knoll chip disposal system. The machine was extended to SW milling in 2015. Documentation available. On-site inspection is possible. Gusdsu T Rg Rjpfx Af Toh

Condition: used, Year of construction: 1971, Manufacturer: Steinel Model: 8 Stations Drilling Units: Type Steinel BE 10 VK Year of Manufacture: 1971 Weight: approx. 4,500 kg General Information / Technical Data: 8-station rotary indexing special drilling machine for vertical and horizontal drilling operations in workpieces, with manual collet clamping. Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Horizontal drilling unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 36 mm Station 3 – Vertical drilling unit, type: BE VK, collet chuck mounting Station 4 – Horizontal drilling unit, type: BE VK, spindle mount: sleeve Ø 36 mm Station 5 – Vertical spindle unit, type: BE VK, spindle mount: sleeve Ø 28 mm Station 6 – Horizontal drilling unit, type BE VK with additional guide, spindle mount: sleeve Ø 28 mm Station 7 – Horizontal drilling unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 36 mm Station 8 – Vertical spindle unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 28 mm Drilling feed: mechanical feed via quill Rotary indexing table: mechanically indexing, 8 positions, Ø 500 mm Workpiece clamping: manual via collet Ø 45 mm Guodpfew E Hpvjx Af Tsh Machine dimensions (W x D x H): approx. 2,600 mm x 2,400 mm x 2,500 mm Power supply / connected load: 380 Volt, 50 Hz Accessories / Special Equipment: • Machine is designed for high-volume production • Features a robust cast machine table with chip conveyor to the rear and a separate large coolant tank • Extensive range of clamping devices and auxiliary tools included • The machine is equipped with a mechanically switched 8-station rotary indexing table • Coolant system with chip tray • Extremely stable machine bed, also ideally suited for rebuilding as a special-purpose machine

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 61062, bar passage: 24 mm, TECHNICAL DETAILS Spindle bore: 24 mm Bar loader Model: IEMCA PRA52 F33 Guedpfx Afoyx Ia Nj Toh Year of manufacture: 2004 Maximum bar length: 3300 mm Maximum bar diameter: 9.1 mm Control system: Siemens S7-200 Drive for parting unit Stroke per slide: 7.15 mm Actuation angle: 26.565° Facing chuck PKD 80 MACHINE DETAILS Operating voltage: 230 / 400V Frequency: 50 Hz EQUIPMENT Nordmann tool monitoring with touchscreen Tool Monitor Chip conveyor (Knoll 500 K-1/450, year 2004) Oil filtering system (Knoll FKA 150) Scraper conveyor with coolant system High-pressure unit FKA / 250 Tubes with coolant connections Hydraulic unit Central lubrication Hydraulic schematic and accessories Pressure intensifier HC3 - 4.0 - B Deflection plate T-T Pneumatic accessories (for 4 cylinders) Compressed air service unit DA 300 Clamping plate for chuck TK420 Oil distributor 2-jaw chuck (Röhm, ID no. 431074, stroke 4.25 mm) Cut-off saw with gear transmission Clamping flange (diameter: 100 mm) Spindle unit complete with toothed belt drive Coolant supply Cover plates for empty stations Material stop (stroke: 60 mm) Parting unit extended by 35 mm Measuring system Z-axis Spindle unit with hydraulic NC-axis Device for rinsing the clamping jaws Change parts for material clamping Stops for hydraulic unit carrier Change parts for bar loading magazine Tools Tool holders Additional clamping with collet Further details about the machine can be found in the attached documents.

Condition: new, Year of construction: 2026, functionality: fully functional, Flexbility: Our Rotaflex machines stand out due to their exceptional flexibility, surpassing that of competitors. These machines are versatile, capable of performing a variety of operations including turning, milling, threading, and recessing. Each station operates independently with up to 5-Axes, ensuring efficient and precise machining. Advanced Turning Capabilities: Rotaflex machines are designed for real turning operations, featuring chucks that can simultaneously position on the B axis and perform turning at speeds up to 6,500 RPM. Please find the demonstration videos below: Gusdpfx Aoyg Nwdof Teh Innovative Plug-and-Run Chucks: Our Plug-and-Run Chucks enable swift chuck changes within seconds, allowing for seamless transitions between jobs. This technology sets Technica apart in the rotary transfer machine industry. Why Choose Technica Rotaflex Machines: Technica machines offer unparalleled versatility and precision, making them ideal for mass production environments that demand high-quality and adaptable machinery. Combining Swiss engineering precision with the multifunctionality, our machines provide reliable and efficient performance.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: HB32-305, Hydromat HB32/16, double cycle, year of manufacture 2020, location: LOGA Präzisionsteile GmbH, Himmelreich 4-6, 78554 Aldingen. Control: Bosch MTX, HME operating interface Coolant system: Knoll (oil), vacuum rotary filter, low-pressure and high-pressure pumps for internal tool cooling Gedpfx Asy Nkhdsf Touh Machine table with 8 collet chucks and 8 two-jaw chucks 1x Stäubli robot for transferring workpieces from the first to the second clamping position 1x loading magazine, 4.2m 1x VE 40/80 sawing unit 8x feed units: VE 36/100 or VE 35/60 5x CNC 50/100 turning units 2x 3-axis CNC milling units Nordmann tool monitoring Pickup conditions: The machine base measures approximately 4 meters in length, 3 meters in height, and 2.5 meters in width. The weight is approx. 6 tons. The other components are demountable. The hall is very spacious. There is no crane runway; a forklift is required for disassembly. No forklift is available on site! The aisles are 3 meters wide. There is a large roller gate, and trucks can drive directly up to, or even through, the gate for loading.

Condition: used, Rotary transfer table, rotary indexing table with 16 stations Rotary transfer machine + hydraulic press TOX Rotary transfer machine, special-purpose machine with several assembly stations Manufacturing and assembly system using a rotary transfer process Godpfx Afjgd D U Ee Teuh From the special-purpose machine manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS, type TC500, with 16 stations - pressing station with TOX power unit - vibratory conveyor - conveyor belts - inspection stations - some stations are still visible in the pictures but have already been dismantled Space requirement L x W x H approx. 3500 x 2750 x 2300 mm Weight approx. 3000 kg All in like-new condition - The system has never been used in series production.

Condition: ready for operation (used), functionality: fully functional, DELTA LC 400 / Rotary table grinding machine -Max. grinding diameter 400mm -Magnetic chuck -Grinding height / distance between table and grinding wheel approx. 230mm -Spindle speed 2850 rpm -Fine feed 0.01mm -Distance between column and grinding wheel axis approx. 320mm -Spindle motor 3 KW -Grinding wheel dimensions 200x80x78mm -Machine enclosure -Coolant system -Documentation Guodpfjz Nkf Eox Af Teh Dimensions: L x W x H 1.2 x 0.8 x 1.8 meters / Weight 700 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2005, A horizontal CNC rotary transfer machine Sinico for tube and bar processing is available. Throughput capacity: approx. 2500pieces/h, max. cutting capacity: 81mm, max. workpiece length: 340mm, max. tube diameter: 81mm, max. bar diameter: 40mm, tool holder: HSK-63, machine weight: approx. 16000kg. Documentation available. An on-site inspection is possible. Guodpfx Afsy Nm U Tj Teh

Condition: ready for operation (used), Year of construction: 2011, A horizontal CNC rotary transfer machine Sinico for tube and bar processing is available. Throughput capacity: approx. 2500pieces/h, max. cutting capacity: 110mm, max. workpiece length: 350mm, max. tube diameter: 81mm, max. bar diameter: 40mm, tool holder: HSK-63, machine weight: approx. 16000kg. The machine has an unknown defect. Documentation available. An on-site inspection is possible. Gujdjy Nm U Hepfx Af Tsh

Condition: ready for operation (used), Two identical Nagel + Hermann transfer and setting machines for transfer motifs (rhinestone, hotfix, or similar) are available. Colors: 6, shapes: 2, production output (2-color): 8000elements/h, feed bowl diameter: 200mm. Machine dimensions X/Y/Z: approx. 2450mm/1100mm/1800mm, weight: approx. 400kg. Including PC, CAD program, 8x feed plates, 22 feed bowls, 4 rotary tables, as well as various spare parts and tools. Documentation available. An on-site inspection is possible. Gusdjzdkp Ijpfx Af Toh

Condition: good (used), Ceever Spraymaster Turning Spray Washing System The industrial washing systems in the Spraymaster series are advanced solutions for spray cleaning small to medium-sized components with a capacity of up to 4,000 kg. Thanks to a rotary table that enables uniform wetting of the parts with the spray jet, these systems ensure maximum effectiveness in surface treatment. Inside the treatment chamber, a channel system with strategically positioned nozzles enables complete spray cleaning of all surfaces, thereby optimizing chemical, mechanical, and thermal processes in a single operation. Gusdpfxjx Ex Nzj Af Tsh Manufacturer: Ceever Type: Spray Master Turning Machine No. Z 429 Load: 500 kg/batch Voltage: 380 Volt Current consumption: 90 A Connected load: 62 kW You can find more new and used items in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 1993, A multi-station transfer machine Riello with drilling and tapping units is available. Horizontal working units: 2x drilling units, 2x tapping units, 1x combined unit. Radial working units: 1x drilling unit, 1x tapping unit, 1x combined unit. Quill stroke: 100mm, spindle holder: SK40, rotary table type: TG 320, turret stations: 5, chuck diameter: 200mm, jaw opening travel: 12mm+12mm, spindle holder-chuck center distance: 225mm, total connected load: 23kW. Machine dimensions X/Y/Z: approx. 3700mm/3400mm/3050mm, weight: approx. 5800kg. Documentation available. An on-site inspection is possible. Gusdpoytgpwefx Af Tjh