Used Esterer Creel Lsh Spare Parts for sale (17,715)

Condition: excellent (used), Spare parts for Esterer log carriages LSH 65, some in new condition, new and used. Flywheels, stanchions, hydraulic cylinders, chain drives, feed gears, Fodpoi T Egpofx Akyopn guides, solenoid valves, overhanging parts. Saw frame, top and bottom, saw carriage with insertion brackets. Pulleys. Spare parts also available for Esterer log carriages SS 71.

Condition: used, Wide selection of used spare parts in good to very good condition for EWD Esterer HDE 71. Overhang plates, adjustment gearboxes for overhang adjustment, complete feed unit, saw frame, roller shafts with sprockets, hydraulic cylinders for roller lifting, chain housing, etc. Fpjdpfxjzht Hwe Akysn

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Fpedpfx Akjyhduysyjn Very good condition – immediately available – fully functional Location: Austria, near Graz

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. Fpjdpfx Akezgr Iqsysn HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Year of construction: 2024, condition: new, +++++ We manufacture the original +++++ Machine parts for the pre-shredders VZ 120, VZ 110, VZ 90, VZ 55. Rotor shaft wear parts. Copper cable recycling machines. Made by Koch. Dortmund - Dorstfeld. Germany. Our non-binding offer: Fpjdpfx Akefgiuzeyon - Labyrinth rings - Dirt deflectors - Spacing rings - Rotor shafts Terms and conditions on our website. Our goal – to help you.

Condition: used, RMS Power Amplifier / Field Unit / Vibration Testing System RMS TGE 10-5/12 + RMS FE3 System package offered exclusively as a source of spare parts For sale is a used RMS system package for vibration testing systems, consisting of a power amplifier, cooling unit, and field unit. The components are sold exclusively together. Functionality has not been tested. Technical data, power amplifier: Manufacturer: RMS Regelungs- und Messtechnik Type: TGE 10-5/12 Serial No.: 16606 Year of manufacture: 2014 Input: 3 × 400 V / 50 Hz Power: 45 kVA Cooling unit: Type: SWG 761/9 Serial No.: 16608 Year of manufacture: 2014 Weight: approx. 250 kg Power stages: RMS power modules TGE 10-400 Several power modules are available in the amplifier cabinet Field unit: Manufacturer: RMS Regelungs- und Messtechnik Type: FE3 Serial No.: 10712 Year of manufacture: 1995 Current display: 0 – 300 A Weight: approx. 600 kg Dimensions and weight: Dimensions amplifier / cooling unit (W × D × H): approx. 1,800 × 800 × 2,000 mm Weight power amplifier: approx. 800 kg Weight cooling unit: approx. 250 kg Weight field unit FE3: approx. 600 kg Total weight: approx. 1,650 kg Equipment: RMS power amplifier TGE 10-5/12 RMS cooling unit SWG 761/9 RMS field unit FE3 RMS power modules TGE 10-400 System control panel with touch display Power transformers / chokes Power, control, and protection components Cooling system / cooling fan Analog ammeter 0 – 300 A Emergency stop, start button, and main switch Connection and supply components as shown in the pictures Application areas: Spare parts sourcing Repair of existing RMS vibration testing systems Supply of spare parts and sub-assemblies Rebuild and repair projects Scope of delivery: 1 × RMS TGE 10-5/12 power amplifier 1 × RMS cooling unit SWG 761/9 1 × RMS FE3 field unit Existing TGE 10-400 power modules Fpjdoz Ixu Dopfx Akyen System control panel Connection and supply components as shown in the pictures Condition: Used Visual condition as shown in the pictures Functionality not tested Sold exclusively as a source of spare parts. Not offered as a fully functional machine. No guarantee for function, operational readiness, or completeness. Shipping or freight shipping is possible. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, RMS Vibration exciter / Vibration testing system RMS SW 6005 Vibration exciter sold exclusively as a source of spare parts. For sale is a used vibration exciter from RMS Regelungs- und Messtechnik. The device is explicitly sold solely as a source of spare parts. Functionality has not been tested. Operational readiness or completeness is not guaranteed. Technical data: Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Type: SW 6005 Year of manufacture: 1983 Voltage: 30 V Current: 200 A Force: 11,770 N Vibration amplitude: ± 13 mm Speed: 1.2 m/s Acceleration: 100 g Weight: approx. 700 kg (estimated) Equipment: RMS vibration exciter SW 6005 Mounting / clamping surface with threaded holes Pneumatic vibration isolation Lateral spring elements Pneumatic components Operating and connection housing Cooling / air connection with hose Transport / lifting eyes Solid base frame Existing mounting and supply components Accessories as shown in the pictures Application areas: Spare parts sourcing Maintenance of existing vibration testing systems Supply of spare parts and subassemblies Fedpfx Aez Iqigjkyepn Reconstruction and repair projects Scope of delivery: 1 × RMS SW 6005 vibration exciter Existing mounting and supply components Cooling / air hose as shown in the pictures Accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No guarantee for functionality, operational readiness, or completeness. Shipping or freight shipping is possible. Subject to changes, errors, and prior sale. We are happy to answer any further questions by phone.

Condition: used, RMS Vibration exciter / vibration testing system RMS SW 6005 Vibration exciter sold exclusively as a source of spare parts A used vibration exciter from RMS Regelungs- und Messtechnik is for sale. The device is explicitly sold solely as a source of spare parts. Functionality has not been tested. Operational readiness or completeness is not guaranteed. Technical data: Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Fpedpfxsz Iqh Ao Akyen Type: SW 6005 Further technical specifications on the nameplate are partially damaged and not completely clearly legible. Equipment: RMS vibration exciter SW 6005 Mounting plate with threaded holes Lateral pneumatic suspension elements Lifting/lowering device Control and connection housing Transport/lifting eyes Base frame Existing mounting and supply components Accessories as shown in the pictures Application areas: Spare parts sourcing Maintenance of existing vibration testing systems Supply of spare parts and sub-assemblies Retrofit and repair projects Scope of supply: 1 × RMS SW 6005 vibration exciter Existing mounting and supply components Accessories as shown in the pictures Weight: approx. 700 kg Condition: Used Optical condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No guarantee for function, operational readiness, or completeness. Shipping or freight shipping possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor With gear transmission Fedpfsw Dn S Aox Akyopn With saw blades With hydraulic saw tensioner With suspension system With templates With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben

Year of construction: 1987, condition: new, New original spare parts Huta Zigmunt 3 500 … 17 500 kgm. Fpjdpfx Akelnlmvsyjn

Condition: used, D+P Dosing and Testing Technology 05-755-011, used industrial spare part Used industrial spare part from Dosing and Testing Technology GmbH. Fpedpez N Hgxofx Akyon Manufacturer: Dosing and Testing Technology GmbH Part number: 05-755-011 Condition: Used Quantity: 3

Condition: excellent (used), Shot blasting machine, continuous blasting machine, wear plates, blast wheel discs -Spare and wear parts: for shot peening system continuous blasting system -Baffle plates: 02122 V105 7 pieces dimensions 390/125/H145 mm / 11.7 kg/piece. -Baffle plates: C1315 N517 2 pieces dimensions 480/140/H175 mm / 15 kg/piece. -Spinning wheel discs: 02122 V105 16 pieces, dimensions 350 x 80 mm / 112.5 kg/total. -Accelerator gears: 4 pcs. Ø 250 x 320 mm / 27 kg/pc. -Conveyor shafts: 3 pieces Ø 80 x 1640 mm / 40 kg/piece -Shipping/Price: complete -Total weight: 452.4 kg Fpodpswaiv Uofx Akyjn

Condition: ready for operation (used), A comprehensive spare parts package for the Arburg Allrounder 221 series is available. 1) Mechanics/Hydraulics/Plasticizing: 6x ejector piston rod, 3x pressure relief valves, clamping cylinder seal kit, 5x ejector seal kit, injection unit seal kit, cylinder D30, screw D30, 20x disc spring D31,5/16,3. 2) Heating/Temperature: 6x barrel heaters 1750W, 5x nozzle heater band 600W, Thermomat, 40x thermocouples. 3) Electrical/Sensors/Switches: 2x coding switch blocks, 6x contact sensors, 5x rocker switches, 2x snap-action switches, 9x switches, 8x microswitches, 2x limit switches, 10x ejector safety switches, 4x initiators, oil level switch, 6x contact pins with contact, 2x pulse counters. 4) Electronics/Control: printed circuit board ARB 279, 2x each membrane keypad ARB 179 and 180, printed circuit board shutdown automation 141, 2x printed circuit board ARB 550, printed circuit board ARB 554. Only package sale is possible. Documentation available. On-site inspection is possible. Fedjycig Dopfx Akyepn

Condition: used, Machine is not operational, control system does not start, spare parts available with control system Horizontal machining center with pallet changer, STEINEL Type BZ 24 FFZ with CNC control system SIEMENS Sinumerik 850 M Mfg. No. 58, Year of manufacture 1990 Travel: X: 630 mm, Y: 500 mm, Z: 500 mm Fpededzqmfopfx Akysn Table size per pallet: 400 x 400 mm Pallet rotation: B-axis Spindle speed: max. 7100 rpm, infinitely variable Tool holder: ISO 40 Power connection: 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double-arm gripper - Pallet changer with 4 pallets - Horizontally positioned pallet location for machining, axis movement = X-axis - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with transverse movement as Y-axis - Coolant nozzles on the spindle ram and in the working area - Coolant system with chip conveyor under the working area - CNC control system SIEMENS Sinumerik 850 M with TFT monitor - Interface for data transfer Space requirement L x W x H: 9000 x 3100 x 3200 mm Weight: 13.5 tons Machine is not operational, control system does not start - otherwise in good condition Transport dimensions: Machine with tool magazine L x W x H: 9000 x 3000 x 3000 mm Chip conveyor L x W x H: 4700 x 1000 x 1450 mm Partial sales possible, please inquire about the required spare parts.

Year of construction: 2005, condition: excellent (used), Spare parts Fjdoxuvihepfx Akyspn

Condition: used, Year of construction: 2017, zpracování slabé hmoty Fpjdpfx Aksnqzkpjyon - délka výřezů od 1300 - 4500 mm - průměr kmene od 130 - 350 mm - 100 m3 / směnná výroba - celkový příkon 230 kW. ​Vyhledat podrobnosti 137 / 5 000 Výsledky překladu Výsledek překladu processing weak matter - length of cutouts from 1300 - 4500 mm - trunk diameter from 130 - 350 mm - 100 m3 / shift production - total input 230 kW.

Year of construction: 2017, condition: used, processing weak matter - length of cutouts from 1300 - 4500 mm - trunk diameter from 130 - 350 mm - 100 m3 / shift production - total input 230 kW Fpjdpfx Aenwm R Nokyen

Condition: used, Year of construction: 1998, Machine is complete - Work till last moment before we dismantle it Fpedeyzgh Depfx Akyen All the parts are available and they are for sale

Condition: defective spare-parts repository (used), Manufacturer: Illig Type: HSA 50C Fpodpfx Akouk Dwfjysn The machine is incomplete and not operational! For spare parts only!!

Condition: used, Technical details: weight of the machine approx.: 5000 kg transport dimensions LxWxH: 1,4 x 1,8 x 2,2 m VERTICAL MULTIFUNCTIONAL HEADSTOCK UNIT FOR VLC 800 MT TURNING MILLING (see last photo for comparison) Fedpfju Nlhksx Akyepn The headstock unit of the EMAG machines of the VLC series is characterised by short strokes, high rapid traverse rates, extreme rigidity and an integrated cooling system. Maintenance-free, frequency-controlled three-phase motors serve as feed drives for the X and Z axes. Max. chuck speed = 800 rpm. Motor: MBS382F Feed drive: 500 stroke (Z-axis) Stroke limitation 500mm Hydraulic cylinder Weight compensation Spindle flange according to DIN 55 026 size Z 380 *

Year of construction: 2004, condition: defective spare-parts repository (used), Manufacturer: Wittmann Model: TP-PLUS-2:90 Fpodpfxeyk Tnnj Akyon Incomplete

Year of construction: 2001, condition: good (used), Spare parts for milling and turning machines, year approx. 2001, 53 pcs. Fjdoxzfaispfx Akyspn

Condition: good (used), Bead mill, agitator mill, shredder, crusher, grinder -Spare parts: 1x bead mill sieve, 1x bead mill screw, 1x bead mill wheel (see pictures) -Dimensions: 500/500/H165mm, 480/480/H175mm, 370/370/H70mm -Weight: 74 kg net complete Fpjdpfoiqu R Djx Akyen

Condition: used, Technical details: intake diameter: 310 mm weight: 216 kg dimensions L x W x H: 0,5x0,2x0,9 m conrods for mechanic press PEE 250 trapezoid thread dia. 146x14mm Fedpeu Nurxjfx Akyjpn *

Condition: used, Year of construction: 2000, Spare parts for the HITACHI SEIKI CNC lathe, type HT 23 RIII, built in 2000. 1. Headstock with chuck. 1. X and Z axis motors. 1. Control panel with monitor. 1. X-Z axis controller. 1. VDI 40 tool turret with 12 positions. Fpsdpfx Akowf Aftoyjn