Used Eht Ehps 15-30 for sale (37,221)

Condition: good (used), Year of construction: 1993, Press force: 150 t Bending length: 3550 mm Distance between uprights: 3050 mm Control system: Cybelec DNC 880S Stroke: 700 mm Overhang: 350 mm Machine weight (approx.): approx. 15,000 kg Machine height: 3900 mm Dkjdpfx Aiegz S S Sslju Accessories/Equipment: - Bending aid positioned in front of the machine - Parking space for the bending aid - 3 stop fingers

Condition: repair required (used), Year of construction: 1993, functionality: not functional, input voltage: 380 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 150 t, table length: 3,550 mm, oil tank capacity: 390 l, For sale is a robust hydraulic EHT bending press, type EHPS 15-35, manufactured in 1993. The machine comes from an industrial setting and, after repair, is ideal for sheet metal processing, metalworking, metal construction, contract manufacturing, or as a production machine for medium to heavy bending operations. The bending press has a working length of 3,550 mm and a pressing force of 1,500 kN, or approximately 150 tons. It is equipped with a Cybelec DNC 880 control system. The scope of delivery includes a comprehensive set of upper and lower tools as well as special tools. Important note regarding the current condition: The machine can be started. However, an error appears during the initialization of the stops, which means that bending cannot currently be performed. The error must be bypassed or professionally repaired. After this error is resolved, the machine should be fully operational again. Therefore, it is being sold explicitly as a used industrial machine in need of repair for restoration purposes. The machine is in used condition, with signs of wear consistent with its age. There are signs of use, paint damage, and dirt, as shown in the pictures. The control cabinet, the control system, the tools, and the machine components are documented in the photos. An on-site inspection is possible and highly recommended, subject to prior arrangement. A functional test is only possible to a limited extent, as there is currently an error during the initialization of the stops. Equipment / Scope of delivery • Hydraulic CNC bending press EHT EHPS 15-35 • Cybelec DNC 880 control system • Existing upper tools / punches • Existing lower tools / dies • Special tools included • Front supports / material supports • Foot switch • Side protection areas / safety guards • Robust EHT industrial design Dedpfx Aioz E U Dpoljku • Large working length of 3,550 mm • Pressing force approx. 150 tons Inspection / Collection The machine is located in an industrial hall and can be inspected by appointment. Disassembly, loading, and transport will be arranged or carried out by the buyer. Assistance with organization can be provided if necessary. Sales note Preferably sold to commercial businesses. No guarantee, no warranty, no returns. Subject to prior sale and errors. All technical specifications have been provided to the best of our knowledge based on the nameplates and available information.

Condition: used, Year of construction: 1971, total length: 3,000 mm, total width: 2,000 mm, total height: 3,000 mm, Weight: 10.000 kg - Year: 1971 - Documentation available: No - CE certificate present: No - Serial number: 20956 - Drive system: Teach-in - Press force [ton]: 150 - Max. working width [mm]: 3050 - Column gap [mm]: 2500 - Backgauge depth [mm]: 750 - Tools included: Yes - Transport dimensions: 3000mm x 2000mm x 3000mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dsdpfx Aijybdknjlsku Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1991, condition: ready for operation (used), Hydraulic CNC press brake EHT for sale. Press force: 1100kN, bending length: 3050mm, min./max. table-ram distance: 280mm/600mm, rapid approach speed: 100mm/s, working speed: 2mm/s-8mm/s, return speed: 100mm/s, backgauge adjustment range: 5-1000mm, backgauge adjustment speed: 200mm/s, backgauge vertical adjustment: +/-10mm, safety distance between tooling and operating elements: 120mm, stopping time: 75ms, stopping distance: 11mm, Control system: DAK 90. Machine weight: 8500kg. Documentation available. Inspection by appointment possible. Dodpozkvk Dsfx Aileku

Condition: good (used), Year of construction: 1995, functionality: fully functional, Press force: 150 t Bending length: 4050 mm Frame width: 3550 mm Control system: CYBELEC ModEva Pac Overhang: 350 mm Distance between table and ram: 430 mm Table width: 250 mm Stroke: 250 mm Total power requirement: 18.5 kW Machine weight, approx.: 16500 kg Space requirement, approx.: 4400x2100x3200 mm Equipment/accessories: - Control system upgrade at the end of 2018 - Electric back gauge, 1250 mm - 10-stage die shifting - Crowning - Tool holder EHT 26 mm Dedszd S Thjpfx Ailsku - Axis control: Y1, Y2, X, R - Sheet metal support table - 4 manually adjustable stop fingers - Pneumatic upper tool clamping - Safety light curtain - 3 adjustable support arms - Oil cooler - 2-hand foot switch

Condition: good (used), Year of construction: 2000, Punch press Manufacturer: EHT Type: Strippit 1500/30 Year of manufacture: 2000 Dkedpfsul S Eaox Ailsu CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Maximum material thickness: 8 mm Punching force: 30 tons Turret with 46 tool stations, including 4 indexing stations, size D 3 programmable clamps Metal table Used exclusively in single-shift operation Includes tools from WILSON TOOL 51026

Condition: good (used), Year of construction: 2001, functionality: fully functional, overall weight: 13,000 kg, Equipment: documentation/manual, Hydraulic press brake Manufacturer: EHT, Type: ECOPRESS 175t x 3050mm Year of manufacture: 2001 Technical data Manufacturer: EHT Type: ECOPRESS 175-30 Year of manufacture: 2001 Working length: 3050 mm Dkodpfsz Iy U Eox Ailju Capacity: 175 t Distance between uprights: 2550 mm Upright overhang: 400 mm Ram stroke: 240 mm Distance between table and ram: min. 370 mm / max. 610 mm Drive power of the main motor: 15 kW Dimensions: approx. L 5000 x W 2400 x H 2950 mm Weight: 13 t Equipment • CYBELEC – DNC 1200 2D graphic control • Pneumatic die shifting • Controlled axes: Y1, Y2, X, R • 4 back gauges, pneumatically clamping • CNC-controlled WILA crowning system • Pneumatic upper tool clamping • Adjustable support arms • Operating manual Tool package: Upper tool, bent, 3050 mm, split, H 200 mm Upper tool, slightly bent, 3020 mm, split, H 220 mm Upper tool, straight with clamping edge, 3050 mm, split, H 220 mm Die block 3050 mm, split: V 16, V24, V12, V8, all 30° + clamping groove, H 110 mm Die V50, 2965 mm, split All information without guarantee. A demonstration is possible at any time in our showroom.

Year of construction: 1990, condition: used, pressure 1500 kN chamfer lenght 3550 mm Dkjdpjd Ih S Usfx Ailju distance between columns 3044 mm Control Cybelec 34 PS-CN column arm 350 mm max. ram stroke 220 mm dimensions of the machine ca. 3200 x 4200 x 2100 m sheet support hinten / back number of support arms 2, verschiebbar / adjust. die shift hydraulical tool clamping upper tool quick change system crown 3 sets of tools included

Condition: used, Year of construction: 1992, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, table length: 4,050 mm, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Dksdpfxoy D Sy Ro Ailju Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: excellent (used), Year of construction: 2014, Technical data: Working length: 8050 mm Press force: 300 tons NC control: DELEM with Cybtouch 15 Controlled axes: Y1/Y2; X1/X2 Stroke: 300 mm Distance between table and punch: 500 mm Overhang: 300 mm Table height: 875 mm Motor power: 26 kW CE marking In-floor machine Weight: approx. 45.5 tons Accessories: Various tools 6 support arms Laser monitoring Dkodpfx Asz Abn Sjilsu Condition: Overall, very good condition The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1999, machine/vehicle number: 211237, functionality: unexamined, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 127 t, oil tank capacity: 250 l, Equipment: CE marking, safety light barrier, Used machine, includes many tools. Cannot be tested. Dedpfjzqux Tox Ailjku Collection only.

Condition: used, Year of construction: 1998, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 54 A, input frequency: 50 Hz, oil tank capacity: 300 l, controller model: DNC 900 PS, working width: 4,050 mm, bending force (max.): 175 t, We are offering this used EHT VARIOPRESS 175-40 press brake, year of manufacture 1998. Machine type: VARIOPRESS 175-40 Dkedeyw Rbyepfx Ailju Serial number: 211030 Year of manufacture: 1998 Working length: 4050 mm Pressing force: 1750 kN Oil capacity: 300 l Frequency: 50 Hz Current type: 3~ Operating voltage: 400 V Control voltage: 24 V Rated current: 54 A Main fuse: 63 A Main motor power: 15 kW Wiring diagram no.: 11702 Control type: DNC 900 PS If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, Year of construction: 2016, machine/vehicle number: 24398, functionality: unexamined, controller manufacturer: Cybelec, controller model: Modeva Pac 15, control type: CNC control, Used Cybelec Modeva Pac 15 controller for press brake, max 7 axes. Dkjdpfxox Dh U Ij Ailou

Condition: good (used), Year of construction: 2007, functionality: fully functional, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 400 mm Overhang: 305 mm Usable installation height: 440 mm Table height: 800 mm Table width: 90 mm Dkjdezt R D Depfx Ailju Machine weight (approx.): 9,100 kg Machine height: 2,500 mm Equipment: -CNC control Cybelec DNC 880 S -2 support arms -Foot switch -Side protective doors -Laser safety system -Tool holder EHT -Pneumatic die shifting system -Crowning -Controlled axes: y1, y2, x, R

Year of construction: 2009, condition: ready for operation (used), A hydraulic CNC press brake Eht. Press force: 230t, working length: 4550mm, distance between side frames: approx. 4050mm, max. stroke: approx. 300mm, max. installation height: approx. 500mm, max. throat depth: approx. 405mm, approach speed: approx. 100mm/s, working speed: approx. 10mm/s, return speed: approx. 100mm/s, control: Cybelec ModEva 10S, operating hours: 41789h. Including various punches and dies. Weight: approx. 23,5t, machine dimensions X/Y/Z: approx. 2400mm/5200mm/3100mm. Documentation available. An on-site inspection is possible. Dodpfx Aszpyx Aeiloku

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop good condition (!!) Features: - Electro-hydraulic sheet metal shear ("swing cut") - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left Dkodpezycpxefx Ailju * for positioning the electrically driven backgauge * Target/actual position value input possible * Adjustment via three-phase motor using a toothed belt - Support table with ball bearings * Recessed handles between the table plates - Front finger guard - Hydraulic sheet metal hold-down devices - 1x side stop with mm scale - 2x front support arms with mm scale - 1x freely movable foot switch - Emergency stop button at the front - 1x movable / rear scrap deflector - Original operating instructions Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks

Condition: used, Year of construction: 2008, sheet width 3050 mm Dkjdszkvx Iopfx Aileu plate thickness 30.0 mm column arm 100 mm cutting angle 1,5° - 3,5° adjustment speed max. 200 mm/s weight 36.000 kg dimensions 4700 x 3535 x 2980 mm

Condition: good (used), Year of construction: 2003, Press force: 50 t Bending length: 1550 mm Distance between uprights: 1150 mm Control: CYBELEC DNC 1200 PS Eco Throat depth: 405 mm Table height: 900 mm Ram stroke: 400 mm Distance table/ram: 720 mm Total power requirement: 9.5 kW Machine weight approx.: 5,200 kg Space requirement approx.: 2000x1900x2920 mm Description Equipment: - Quick clamping system for upper tools - Side and rear guards with access door - 2 front sliding support arms, 800 mm length - Laser optical safety system - CYBELEC DNC 1200 PS – ECO control Rear gauge – System 1 - Optimized finger geometry - 2 workpiece support levels for larger back gauge dimensions - 2 axes (X-R) - Electric depth adjustment (X-axis) - Electric height adjustment (R-axis) - Manually adjustable stop fingers - Pneumatic clamping operated by push button at the control panel - 2 additional offset stop fingers Dodjy H H Tkopfx Ailoku Lower tool clamping system - Centering bar * with pneumatic quick-release system - Infinitely variable die shift (MVX) * Shifting via X-axis of the back gauge - Any positions freely selectable

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, clamping force: 150 kN, screw diameter: 18 mm, clearance between the columns: 220 mm, total length: 2,100 mm, total width: 800 mm, overall weight: 1,550 kg, Clamping force: 15t Year of manufacture: 2001 Injection unit 30 Screw diameter: 18 mm Pump motor power: 5.5 kW Cylinder heating band power: 3.9 kW Tool clamping unit 150 Clamping force: 15 t Distance between columns: 220 x 220 mm Dkjdsz Egkuspfx Ailsu Weight: 1550 kg Footprint: approx. 2100 x 800 mm Control system: Selogica ARBURG Allrounder 220 S 150-30, year of manufacture 2001 Equipment / condition: - Selogica control system with CF card reader - Clamping force 150 kN, injection unit 30, 18 mm screw (screw/cylinder inspected) - Very compact machine, footprint approx. 2.1 x 0.8 m – ideal for small parts - From a tool shop (trial molds and pre-production runs), little used in recent years - No peripherals (dryer and hopper available upon request)

Condition: used, Year of construction: 2003, pressure 50 t chamfer lenght 1550 mm distance between columns 1150 mm Control CYBELEC DNC 1200 PS Eco column arm 405 mm table height 900 mm stroke of ram 400 mm distance between table / ram 720 mm total power requirement 9,5 kW weight of the machine ca. 5.200 kg dimensions of the machine ca. 2000x1900x2920 mm Accessories/Equipment: - CYBELEC DNC 1200 PS Eco controller - 2 support arms - 4 stop fingers - Lasersafe Dksdjy D T Tlopfx Aileu - Foot switch

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Technical data: - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t - with: - CYBELEC ModEva 10 S control unit renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms Dkedpstqmvzofx Ailsu - split pointing tool, - universal die

Condition: used, Year of construction: 1997, pressure 225 t chamfer lenght 3050 mm distance between columns 2550 mm column arm 300 mm ajustment speed 110 mm/sec work speed 9.0 mm/sec return speed 130 mm/sec work stroke 240 mm dayligth 320 - 560 mm table height 1000 mm table width 200 mm oil volume 350 ltr. operating pressure max. 296 bar air pressure 4.5 - 6.0 bar voltage 400 Volt total power requirement 18.5 kW weight 14900 kg range L-W-H 5180 x 2400 x 3100 mm - in checked condition - machine video - ?v=ebbbzSYMxKw Furnishing: - electro-hydraulic CNC die bending/press brake - CYBELEC CNC control "ModEva 12S", swiveling at the front right Dedpexaa Dtjfx Aileku * High-resolution graphic color screen 14 inches * Representation as a line, area or volume drawing of the product * Clear, concise menus in the operator's language * Large tools and products library - CNC-controlled back gauge adjustment (X-axis) * Stop range X axis of bending line .. 5.0 - 1.000 mm * Adjustment speed .. max. 250 mm/sec. - CNC-controlled vertical adjustment of the stop fingers (R axis) * Adjustment range of table surface .. 115 - 265 mm * Adjustment speed .. max. 100 mm/sec. * Adjustment via SERVO motors - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2 axis) * Adjustment range Z1 .. 405 - 2565 mm * Adjustment range Z2 .. 485 - 2645 mm * Adjustment speed .. max. 1000 mm/sec. - WILA CNC-controlled electric table crowning - pneumatic EHT upper tool clamping - manual lower tool clamping - 1x freely movable 2 hand/foot control - 2x front, movable support arms - rear protective device (sliding protective grille) - side protection device (pivoting protective grille) - 1x set of EHT deer foot upper tool - split (not complete) - 1x set of EHT lower tools - split (3.000 mm) - original operating instructions (machine + control)

Condition: used, Year of construction: 1992, The WENZEL RS 30-12-15 CNC coordinate measuring machine (3D-CMM) is suitable for precise 3D measuring tasks in quality control, production metrology, and incoming goods inspection. It is equipped with a CNC control system and a Renishaw PH10 / TP20 probe system. The large measuring range of 3,000 x 2,000 x 1,500 mm (X/Y/Z) enables the measurement of large workpieces. Dksdpfozqc Hrox Ailou The machine is ideal for use in tool, mold, and machine manufacturing, as well as in any application where highly precise coordinate measurements are required.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, working width: 3,000 mm, cutting angle (min.): 1.5 °, sheet thickness (max.): 30 mm, throat depth: 100 mm, TECHNICAL DETAILS Sheet metal width: 3,050 mm Sheet metal thickness: 30.0 mm Stand extension: 100 mm Dkedpfxozlg Sbj Ailou Cutting angle: 1.5° - 3.5° Adjustment speed: max. 200 mm/s MACHINE DETAILS Dimensions & Weight Dimensions: 4,700 x 3,535 x 2,980 mm Weight: 36,000 kg

Condition: ready for operation (used), Year of construction: 2001, pressure 135 t chamfer lenght 3050 mm distance between columns 2550 mm dayligth 320 - 560 mm stroke 240 mm working feed 10.0 mm/sec return speed 150 mm/sec column arm 400 mm work height max. 1050 mm control DNC 1200 PS/B operating pressure max. 297 bar compressed air 4.5 - 6.0 bar connected load 15.0 kW oil volume 250 ltr. weight 11500 kg range L-W-H 5240 x 2400 x 2900 mm good/well-Maintained conditions used in Aluminum processing - in checked conditions - machine Video - ?v=z-Bxibk_8uE Features: - CNC Electro-Hydraulic Press Brake - CYBELEC CNC Control Model DNC 1200 PS/B * Swiveling Control Panel, Front Right * Numerical Programming * Tool & Program Library - CNC Controlled Axes: Y1 + Y2 + X + R + CNC Crowning - CNC Electro-Motorized Backgauge (X-Axis) * with 3x Manually Adjustable Backgauge Fingers (Z-Axis) * Maximum Travel Speed: 250 mm/sec - CNC electro-motorized height adjustment from the backgauge (R-axis) Dkodpfx Aiex Ik D Aelsu * Maximum travel speed: 100 mm/sec. - CNC under-table crowning - CNC pneumatic die shifting (I-axis) - Pneumatic upper tool clamping - Pneumatic lower tool clamping - Rear safety guard, including swiveling door - 2x side safety guards - includes LAZER SAFE safety device - front - 2x stable front support arms with sliding system - original EHT split upper and lower tools - 1x freely movable 2-hand/foot control - Wiring diagram + hydraulic diagram