Used Efi Vutek Gs3250Lx Pro for sale (6,583)

Condition: excellent (used), Year of construction: 2014, The EFI VUTEk GS3250LX Pro is an industrial-grade hybrid (flatbed and roll-fed) UV LED inkjet printer. It is designed for continuous production on both rigid substrates and flexible roll materials, bridging the gap between point-of-purchase (POP) quality and high-speed production. Manufacturing Year: 2014 Color configuration: Fast four (CMYK) + White Printheads: Seiko 12 picoliters Printhead status: Perfect (spare heads on stock) Spare spare parts and refurbished belt included In prodcution Demo possible Location: Western Europe Ksdpjz Hw Tpsfx Ahbodu For further technical details refer to enclosed data sheet Productivity & Speed • Up to Speed Mode (Fast-4, 600 dpi, no smoothing): Around 223 m²/hr (2,400 ft²/hr) or up to 60 standard 1.2 m x 2.4 m boards per hour. • Eight-Color Plus White Mode: Up to 111 m²/hr (1,200 ft²/hr) or roughly 32 boards per hour. • POP Quality Mode (600 dpi, 8-color, light smoothing): Approximately 84 m²/hr (900 ft²/hr). • Best Quality Mode (1,000 dpi, 8-color, heavy smoothing): Roughly 26 m²/hr (275 ft²/hr). • Continuous Board Production: Less than 5 seconds of gap time between rigid boards using its precision alignment fence

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 930135, color channels: 8 couleurs + blanc, year of last overhaul: 2026, Equipment: documentation/manual, We are selling an industrial printer in very good condition. The machine is covered by a service contract and is properly maintained. We primarily use this printer for printing banners, vinyl, paper, and, of course, all rigid materials such as Forex, Dibond, corrugated board, etc. We can operate the printer in 4-color mode (fast mode) or using 8 colors for high-quality prints. The printer is located in Belgium and is available for a demonstration at any time. Ksdpfxjz R Tuyo Ahbedu

Condition: excellent (used), Year of construction: 2013, The EFI VUTEk GS3250 is a 3.2-meter, high-production UV hybrid flatbed/roll-to-roll printer. It is engineered to seamlessly bridge the gap between high-margin, photo-realistic point-of-purchase (POP) graphics and heavy-duty, fast-turnaround commercial print runs Eight colours + White Western Europe Kdjdpfjz Dh N Aex Ahbeu Installation possible upon reqiest In production, demo possible Official documentation outlines the comprehensive technical specifications and facility requirements for the VUTEk GS3250 system are enclosed

Condition: refurbished (used), Year of construction: 2020, EFI Vutek Pro32R + LED printer Print width 3.2 m 12 Ricoh Gen 5 print heads, 7 pl UltraDrop Color: 4 C + White; Resolution: 900 dpi Installed at the end of 2019 Speed: up to 256 m²/h Kjdpfx Asz Sp E Aehbjdu Media edge guard sensor

Condition: excellent (used), Year of construction: 2015, The EFITM VUTEk® HS100 Pro high-volume digital UV inkjet press combines the productivity of screen with image quality approaching off set Printer has been flushed and prepared for transport. Revolutionary productivity • 3.2-meter hybrid digital UV printer handles up to 100 beds/boards per hour in production mode; up to 70 boards per hour in P-O-P mode. • Lower cost per board by eliminating makereadies for job versioning, regionalization, and customization. • Less waste, less downtime, and no increase in Kdedpozl D Adofx Ahbju labor costs. For further technical details please refer to enclosed brochure

Condition: excellent (used), Year of construction: 2018, The EFI VUTEk GS2000LX Pro is a production-level, hybrid rigid/roll-fed superwide inkjet printer engineered for high-definition point-of-purchase (POP) graphics, indoor signage, and industrial advertising. Utilizing advanced LED UV-curing technology, it balances high-throughput productivity with an eco-friendly design that handles heat-sensitive substrates seamlessly Excellent conditions, 8 colours + White In production, demo possible Western Europe Installation and training available upon request Kjdpfx Ahsz Dhnlobjdu For further technical specifications please refer to attached brochure

Condition: used, Year of construction: 2011, machine/vehicle number: 1537111, type of input current: three-phase, input current: 30 A, input voltage: 400 V, EFI VUTEk GS3200 UV roll-to-roll printer, year of construction 2012, including two extension tables. Sold directly by the owner: a Belgian manufacturer of visual communication, founded in 1832 and part of an international group, ISO 9001 and ISO 14001 certified. This printer comes from our own production floor. It is for sale because our focus is shifting towards total solutions in visual communication, not because there is anything wrong with the machine. MACHINE - EFI VUTEk GS3200 UV printer - Printing width up to 3.2 m - Year of construction 2012 Ksdpfezvu Nijx Ahbjdu - Supplied with 2 extension tables CONDITION Used, from our own production. Sold as seen, without factory warranty. We will tell you the exact condition and answer every technical question before you decide. Additional photos and technical details available on request. PRACTICAL - Ex works, collection in Olen, Belgium - Dismantling, transport and installation can be arranged at day rate - Business sale with invoice - Payment before collection Get in touch through this listing for additional photos, exact specifications or a viewing appointment.

Condition: excellent (used), Year of construction: 2022, Two UV-LED roll-to-roll EFI Pro 32r+ for sale Year of installation: January 5, 2022 and August 15, 2022 Printers are in very good condition and ready for production Main technical information: Printing width: 3200 mm Printing speed up to 256 sqm per hour 8 printheads Kdedpfx Ahjx Aibyebju Droplet size: 7 pL Color configuration: 2 x CMYK (no white)

Condition: excellent (used), Year of construction: 2014, The EFI VUTEk GS5000r is a 5-meter, premium roll-to-roll UV inkjet printer designed to balance high-definition point-of-purchase (POP) quality with heavy-duty billboard production speeds In production, demo possible Western Europe Installation possible upon request Performance & Productivity Fast-4™ Mode (Billboard): Up to 3,100 ft²/hr (approx. 288 m²/hr). Eight-Color Mode (POP Quality): Up to 1,033 ft²/hr (approx. 96 m²/hr). Production Management: Standard multi-queue functionality driven by an EFI Fiery XF RIP front-end system. For further yechnical detisl please refer to enclosed brochure Kedpfxjz Dh Eke Ahbedu

Condition: used, Year of construction: 2020, operating hours: 290 h, functionality: fully functional, number of ink cartridges: 5, color channels: CMYK+2W, resolution (max.): 1,200 dpi, paper weight (max.): 4,500 g/m², paper width (max.): 1,600 mm, paper height (max.): 40 mm, number of feeding trays: 1, total length: 3,480 mm, total width: 1,630 mm, total height: 2,410 mm, year of last overhaul: 2024, type of input current: AC, input current: 30 A, input voltage: 220 V, Equipment: documentation/manual, EFI 16H Pro UV LED Hybrid Printer – Premium 1.6m Industrial System Professional Grade Large Format Printer | Competitive Pricing | Immediate Availability Model EFI 16H Pro UV LED Hybrid Print Width 1.6 meters (16H designation) Color Configuration CMYK + 2 White Resolution 1200 x 1200 dpi (professional quality) Print Speed Up to 91 m²/hour Ink Technology UV LED curable pigment ink Printing Modes 4-pass (outdoor durability), 6-pass (POS applications) Kdsdpfoxup Tgjx Ahbsu Installation Date July 2021 Installed Age 4 years (meticulously maintained) Total Output 5,500 m² (tracked via ERM system) Included Equipment & Accessories EFI Control Software Suite – Latest drivers and management tools Machine Controller – Integrated system for scheduling and color management Flatbed Tables – Two precision flatbed work surfaces for rigid media Roll-to-Roll System – Motorized unwinder and motorized rewinder for continuous roll media Complete Documentation – Manuals, maintenance logs, technical support information Condition & Maintenance History Overall Condition: 90% – Excellent working order Printhead Status: One Cyan printhead requires cleaning (routine maintenance) Mechanical: All systems operational and well-maintained Cosmetic: Professional appearance, consistent with industrial facility use Can assist with transport preparation and truck loading for a small fee

Condition: like new (used), Year of construction: 2025, EFI Vutek Pro33R + LED roll printer Print width 3.2m Demo machine with very low mileage 8 Ricoh Gen 6 print heads, 5pl UltraDrop Color: 4C; Resolution: 1100 dpi Installed in August 2025 Speed up to 256 m²/h Ksdpfx Aozzbf Iehbedu Slitter for Pro33 Media edge guard sensor New price: €225,000 (complete, August 2025)

Condition: excellent (used), Year of construction: 2022, The EFI VUTEk h5 is a premium, high-volume 3.2-meter superwide hybrid production printer reengineered from the ground up to offer extreme efficiency, unmatched versatility, and maximum throughput The EFI VUTEk h5 platform acts as a true industrial hybrid, effortlessly transforming from a high-speed rigid flatbed press to a heavy-duty roll-to-roll media system. By combining premium imaging with an elite automation framework, it allows print shops to dramatically lower delivery times and process up to 109 boards per hour Configuration: 8 colors + w Productivity: 109 boards per hour Kdsdpfx Ahexanwzobju Under production. Pictures and videos available upon request. For further technical information, please refer to enclosed brochure.

Condition: used, Spare parts exclusively for the Vutek GS3250 LXpro LED. - LED lamp - Motors - Electronic boards Kodpfx Ajz Hv I Ejhbsdu - Printheads 12pl - Carriage - Ink filling parts - Everything you need!

Condition: good (used), Year of construction: 2019, functionality: fully functional, number of ink cartridges: 4, color channels: 4, resolution (max.): 1,200 dpi, total length: 3,400 mm, total width: 5,280 mm, total height: 1,450 mm, type of input current: AC, The printer was covered by an Enhanced Service Program (ESP) until the end of 2025. The contract was not renewed because the printer was taken out of production and placed into storage at our warehouse after a newer printer was installed. The white printheads were removed as we no longer used white ink. Since they still required regular maintenance, it was not economically practical to keep them installed. Before being placed into storage, the printer was inspected by an EFI-certified technician, who confirmed that the machine was in excellent condition. Throughout our five years of ownership, the printer operated reliably with no major issues. Only routine wear-and-tear parts were replaced, including filters, ink tubes, and four printheads. The printheads currently installed in the printer are in excellent condition. Please see the attached photos for details. Kdedpfsza Rtasx Ahbeu The printer was properly prepared for long-term storage, with storage fluid installed in the printheads and ink system to ensure safe preservation during downtime.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, color channels: 8, Vutek GS 5000 LXpro LED 5 m UV roll printer with LED lamp Very low noise and quick start-up Resolution: 12pl-1000 dpi Colors: 8C CMYl + Light colors, white (over and under print) Speed up to 224 m²/h Mesh Kit - Fully refurbished with warranty by EFI dealer Available now, end of April. Kedpfxsyzg Nbs Ahbodu

Year of construction: 2020, condition: used, The system is designed for the semi-automatic gluing and pressing of finger-jointed box bodies made of solid wood and plywood, the system is floor-mounted and can be manually adjusted to accommodate different box sizes, up to two pneumatic cylinders can be installed on each of the four sides of the boxes for pressing, for smaller boxes the number is reduced to one cylinder per side, a dispensing system is provided for glue application, which applies the glue to the finger joints of the boxes using assembly aids, equipment: table made of aluminum profiles, two aluminum profile rails each in longitudinal and transverse direction, adjustable to the required box size using clamping levers, up to four pneumatic diaphragm cylinders for clamping the longitudinal sides, four guided pneumatic cylinders with brackets for moving the assembly aids, up to eight pneumatic cylinders for pressing the boxes, dispensing system, weight: 370kg, with documentation. An on-site inspection is possible. Kodpfx Ajz S Iwdehbsdu

Condition: like new (used), Year of construction: 2019, CAP 30 APPLICATOR 1000 SLIM FOR HELICAP 23 PRO: Kdsdpfx Aheyynd Rjbeu YOM 2019 VERSION 400v 9.000 RUNNING HOURS NEW CONDITION

Year of construction: 2000, condition: good (used), Vitronics Soltec reflow oven, type: 6638 Quantis Pro Ksdpfsq I Shaex Ahbsdu

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: I15CIP1350GL, grinding length: 1,350 mm, total width: 700 mm, total length: 2,200 mm, total height: 1,400 mm, grinding width: 90 mm, type of input current: three-phase, input voltage: 400 V, grinding height: 30 mm, grinding spindle motor power: 2,200 W, overall weight: 455 kg, grinding wheel diameter: 150 mm, input frequency: 50 Hz, input current: 3 A, operating speed: 22 mm/s, Equipment: rotational speed infinitely variable, The electronically controlled version of the grinding wheel depth uses a PLC + HMI screen, allowing for precise control of the sharpening process. Sharpening machine motor power: 2.2 kW Grinding wheel diameter: Ø150 mm Grinding wheel peripheral speed, continuously adjustable via the CNC panel: 5 to 22 m/s Grinding wheel depth adjustment, settable via the CNC panel: 0.001–0.05 mm Maximum distance between the magnetic table and the grinding wheel: 30 mm Width of the clamp/magnetic table: 90 mm Feed motor: 0.18 kW Carriage feed speed, electronically adjustable via the CNC panel: 0.5–15 m/min Coolant pump: 0.18 kW Oil pump for lubricating the guides (operating frequency selectable via the CNC panel): 0.18 kW Coolant pump flow rate: 30 l/min Voltage: 400 V Frequency: 50 Hz Weight: 455 kg Maximum sharpening length: 1350 mm Machine width (approx.): 700 mm Machine height (approx.): 1400 mm Machine length (approx.): 2200 mm Kdedpfxozytw Hs Ahbju The grinder is connected to a coolant tank and is equipped with a magnetic screw system for collecting metal chips.

Condition: used, 3D Systems SLS PRO 230 Sinterstation Pro Fully operational and complete with extensive accessories Kdjdjyghifjpfx Ahbeu

Condition: used, Eagle Pro Pack 240 PRO – Advanced X-Ray Inspection for Packaged Products The Eagle Pro Pack 240 PRO is a high-performance X-ray inspection system designed for maximum product safety, quality assurance, and production efficiency. Ideal for food, pet food, pharmaceutical, and consumer goods applications, this system combines cutting-edge detection technology with robust industrial design. ----- Key Features & Benefits - Reliable detection of foreign contaminants, even in dense or metallized packaging - Multiple quality checks in a single inspection - High inspection accuracy at high production speeds - Hygienic, stainless-steel construction for demanding production environments Technical Specifications Inspection Area - Maximum inspection width: up to 242 mm - Maximum inspection height: up to 101 mm - Conveyor width: approximately 298 mm Detection Capabilities Kedpfx Ahsx Srn Rjbsdu - Detection of metal, glass, stone, mineral bone, and dense plastics - Product integrity checks: - Missing or broken items - Shape and position verification - Fill level and mass/weight control (2-, 3- or 5-zone analysis) X-Ray Technology - Detector resolution: - Up to 0.4 mm (PXT™ dual-energy) - 1.2 mm single-energy Software & Controls - 15” full-color touchscreen HMI - Eagle SimulTask™ PRO image processing software - Windows 10 Enterprise operating system - Remote diagnostics via TeamViewer™ Conveyor & Speed - Variable belt speed: 17 – 114 m/min, depending on configuration and product Connectivity - USB 2.0 - Ethernet 10/100/1000 - Optional EtherNet/IP Fieldbus integration Construction & Safety - Hygienic stainless-steel design (IP65/IP66 optional) - Low radiation emission: < 1 µSv/h - Compliant with international X-ray and electrical safety standards (CE / FDA) Operating Conditions - Operating temperature: 0 – 40 °C - Power supply: 230 V AC, 50/60 Hz, single phase Why Choose the Eagle Pro Pack 240 PRO? - Superior detection performance - Increased production uptime - Reduced false rejects - Designed for modern, high-speed production lines More photos and full specifications: /

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: DC, travel distance X-axis: 2,960 mm, travel distance Y-axis: 4,800 mm, travel distance Z-axis: 510 mm, workpiece length (max.): 6,000 mm, workpiece width (max.): 1,600 mm, workpiece height (max.): 120 mm, number of axes: 5, number of slots in tool magazine: 40, controller manufacturer: osai, actuation type: pneumatic, Equipment: CE marking, documentation/manual, The machine is in full working order. It is operational. Maintained accuracy is at the level of +/- 0.2 mm. The offer with details and photos is attached. Kodpfo Aarplex Ahbodu

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 00031444-ER, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 60 t, stroke length: 275 mm, operating speed: 160 mm/s, reverse speed: 165 mm/s, table length: 1,270 mm, table height: 900 mm, throat depth: 410 mm, oil tank capacity: 150 l, total length: 3,175 mm, total width: 2,100 mm, total height: 2,580 mm, overall weight: 4,320 kg, Equipment: documentation/manual, Manufacturer: ERMAKSAN Model: Speed-Bend Pro 1270×60 Machine type: CNC Hydraulic Press Brake The ERMAKSAN Speed-Bend Pro 1270×60 is a high-precision CNC hydraulic press brake designed for accurate and efficient sheet metal bending. With a maximum bending force of 60 tons and a bending length of 1,270 mm, this machine is suitable for a wide range of industrial sheet metal processing applications. Technical Specifications Maximum bending force: 60 tons (600 kN) Maximum bending length: 1,270 mm Ram stroke: 275 mm Table height: 900 mm Table width: 90 mm Main motor power: 7.5 kW Power supply: 400 V, 3-phase, 50 Hz CNC control: Delem DA-66T (depending on machine configuration) Tool Clamping System: European-style tooling clamping system Side safety guards Foot control: Dual foot pedal Electrical system: Siemens Hydraulic system: Hoerbiger hydraulic system Controller: CYBELEC CYBTOUCH 15PS 2D Upper Tooling (Punch): Rolleri PS 135.85.R08 Machine available from January 16, 2027. Kdodpfez Slyqex Ahbju

Condition: excellent (used), Electrical safety tester from the renowned German manufacturer Gossen Metrawatt The SECUTEST Pro model is designed for testing electrical devices in accordance with the IEC 62353 standard. The set includes several devices along with measuring leads and carrying bags. TECHNICAL DETAILS Manufacturer: Gossen Metrawatt Model: SECUTEST Pro Standard: IEC 62353 Power supply: 230 V Professional tester for electrical device safety SET INCLUDES Several testers Measuring cables Adapters Carrying bags Exact condition as shown in the photos APPLICATIONS Testing of electrical devices Service and maintenance Safety inspections Medical and industrial use CONDITION Used Visually in good condition Technical condition not fully checked Kodpfx Ahjz Slxgobedu IMPORTANT Sale as a set as shown in the photos No additional accessories except those pictured SHIPPING

Year of construction: 2021, condition: good (used), functionality: fully functional, Depanner for sale due to surplus. Kedpfx Aheyzp Sfobsdu