Used Effbe Barrymount Lm 8-200 U. 250 for sale (78,541)

Condition: used, Outer diameter: 315 mm Overall height: 70 mm Length of adjusting screws: 200 mm Thread: M 30 x 2 Permissible maximum static load: 11000 kp Maximum load (general): 8000 kp Itodpjbx Eiuefx Ahbon

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence Iodpfx Aezu Ryhshbjtn TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: excellent (used), Year of construction: 2003, Arburg 270S 250-60 U / Universal Machine Year of Manufacture: 2003 Injection Unit: Screw Diameter: 18 mm Shot Weight: 17 g Injection Pressure: 2500 bar Dosing Volume: 20 ccm Clamping Unit: Clamping Force: 25 t Tie Bar Spacing: 270x270 mm Platen Size: 400x400 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: SELOGICA - Touchscreen Additional Equipment: Universal machine - Injection unit can operate both vertically and horizontally Euromap 12 Robot interface Air valve x 4 Hydraulic core pull x 1 Control system with hot runner system x 8 Injection unit hardened - bimetal Proportional valve on the injection unit – precise injection Itodpfxjz Iqrus Ahbjn Type of injection unit: Vario, allows the injection unit to be used, for example, for side injection Automatically opening cover Dimensions: Weight: 1900 kg Length/Width/Height: 2.89x1.11x1.85 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2003, Arburg 270S 250-60 U / Universal Machine Year of Manufacture: 2003 Injection Unit: Iodpfjz Iqpysx Ahbetn Screw Diameter: 18 mm Shot Weight: 17 g Injection Pressure: 2500 bar Dosing Volume: 20 ccm Clamping Unit: Clamping Force: 25 t Tie Bar Spacing: 270x270 mm Platen Size: 400x400 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: SELOGICA - Touchscreen Additional Equipment: Universal machine - Injection unit can operate both vertically and horizontally Euromap 12 Robot interface Air valve x 4 Hydraulic core pull x 1 Control system with hot runner system x 8 Injection unit hardened - bimetal Proportional valve on the injection unit – precise injection Type of injection unit: Vario, allows the injection unit to be used, for example, for side injection Automatically opening cover Dimensions: Weight: 1900 kg Length/Width/Height: 2.89x1.11x1.85 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Professional industrial pad printing machine from the renowned Swiss company Teca-Print AG. The device is designed for printing on components made of plastic, metal, wood, and other technical parts. Robust industrial construction, ideal for series production, technical marking, advertising prints, logos, and product marking. The machine is in good visual and technical condition. Technical Data: Manufacturer: Teca-Print AG Model: TPU 250 Type: pad printing machine Power supply: 220 V Frequency: 50 Hz Pneumatic control Itodpfjz Sm Ddsx Ahben Foot-operated pedal Adjustable worktable Heavy-duty industrial build Manufactured in: Switzerland Serial No.: 9708305 Applications: - printing on plastics - marking metal components - technical prints - logos and advertising - series production - marking industrial parts Includes: - Teca-Print TPU 250 machine - documentation / manuals - accessories as shown in the photos

Condition: excellent (used), Year of construction: 2010, the complete Tetra Pak volume conversion kit A3 Flex 200/250 ml Square, version machine 100/150. Packed into original wooden Tetra Pak boxes. Excellent condition. Itedpfx Ahof Th Sxjbsn Location - Poland

Condition: good (used), Year of construction: 1999, Lg 33922 Unwinding and guiding unit SOPREM BRH 7-200-80U-1250 BAP Web width: max. 200 mm Coil weight: max. 1,250 kg Spreading range: approx. 380 to 430 mm Coil outer diameter: max. 1,300 mm Web thickness: approx. 0.8 to 3 mm Working direction: from right to left Itodpfohuwacsx Ahbjn

Condition: used, Year of construction: 2017, Technical details: operating pressure: 12 bar container volume: 200 l Total weight, approx.: 220 kg dimensions L x W x H: 1,2 x 1,1 x 1,8 m Mobile pressure blasting pot - Sand blasting system Blasting tank pressure up to 12 bar Test pressure 17.2 bar Ideally equipped with: -with remote control valve Itsdpfx Ajvvvrpjhbsn -with remote control lever -with electro-pneumatic remote control -with carbide spray nozzle incl. 10 m nozzle hose i.D. *

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 Isdpfx Ahez Ipnbebetn 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2001, operating hours: 38,850 h, clamping force: 25 kN, displacement volume: 20 cm³, injection pressure: 1,810 bar, overall weight: 1,900 kg, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Isdpfx Ajyt R S Ajhbstn

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 5,150 mm, total length: 16,000 mm, total height: 4,850 mm, temperature: 2 °C, We are offering this like-new Heidinger I-1751 refrigerated storage room, manufactured in 2023. Type: I - 1751 Year of manufacture: 2023 Double refrigerated storage room, 2-8°C (unused) Each with a Viessmann double door, 2m x 2.7m Isdpfx Aheykrtpobstn Redundant design Internal dimensions approximately 16m (L) x 5.15m (W) x 4.85m (H) each Walls made of 100mm sandwich panels No separate floor, therefore accessible with a forklift Compressors: 4x Bitzer Ecostar LHV5E/2DES-3.F1Y-40S Evaporators: 4x Güntner GACC RX 040.1/2WN/DJA4A.UNNN The refrigerated storage room was built for storing medication and has never been put into operation after acceptance by the manufacturer. The pallet racking shown in the pictures is not included in the offer. Dismantling and transport are the responsibility of the buyer. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Technical data for the shelf connector: Shelf system: Stow Type: Pal Rack NS Included in delivery are: 01x shelf connector, used for shelf distance: 250 mm total length: 250 mm cross section: U 35x25 mm Itedpfx Ahomqk Svebsn material thickness: approx. 2,00 mm material color: sendzimir galvanized Drill hole diameter: 11 mm Weight: 0,330 kg | pcs. 02x screws M10 x 35 mm 02x nuts M10 General information about the article: This article is only offered for pickup. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: used, Year of construction: 2005, operating hours: 40,000 h, clamping force: 25 kN, displacement volume: 230 cm³, injection pressure: 2,500 bar, overall weight: 2,500 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz Iedpfxoynbcne Ahbstn delivery time: on request terms of payment: 100% prior to delivery

Year of construction: 2007, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen spacing: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1700mm/2100mm, weight: approx. 3500kg. Documentation available. On site inspection is possible. Iedpfeyddzljx Ahbstn

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: BN2222, Demag chain hoist crane lifting mechanism 3200 kg DC-Pro 16-3200 H8 V4/1 Load capacity 3200 kg / 3.2 t, lifting capacity – 2-strand with trolley drive (beam width approx. 25-33 cm) with 2 lifting speeds, lifting height approx. 8 m!!! incl. control valve block Total weight approx. 160 kg, connection to 400 V 50 Hz Itedpfxszhtfmo Ahbjn Very good condition, hardly used Item location is 75053 Gondelsheim See pictures

Condition: excellent (used), Year of construction: 2020, For sale is a used Drechselmeister Twister FU 200 woodturning lathe with a center distance of 715 mm. The machine is in good condition. Technical specifications: - Center height: 200 mm - Max. turning diameter: 395 mm (700 mm with optional outboard turning attachment) - Center distance: approx. 715 mm (optionally extendable) - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Speed ranges (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Tailstock quill travel: 100 mm (trapezoidal thread), prepared for ER-25 drill quill Isdpfx Ahoyucw Tjbstn - Motor: 2 HP (230 V connection) - 2-stage brake switch - Weight, floor-standing version: 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Sale subject to prior sale! Related terms: woodturning lathe, lathe, turning machine, wood lathe, turning, turning tools, woodturning, machining, machine Reference: B18OO

Condition: excellent (used), machine/vehicle number: 00 06 028/00 0026 S, functionality: fully functional, Desiccant air dryer Manufacturer: Motan Type: Luxor LA/8-200 Connection power: 6 kW Dry air flow rate: 200 m3/h Silos for granules: 1 x 150 L 4 x 60 L Isdpfeyvfkrox Ahbjtn Material conveying equipment: Manufacturer: Motan Type: HLX-06-1-A000-0 5 units PRICE REDUCTION FROM 7500 TO 6750 EUR!!!

Year of construction: 2025, condition: ready for operation (used), A like-new dosing machine Gabler, manufactured by Volkmann and used only once for testing purposes, is available. Screw conveyor: 10m, Conveying height: 3m, Conveying capacity: 600kg/h, Bulk density: 0.6-0.7kg/l, Particle geometry: Powder, Min. particle size: 5µm, Product feeding station: RNT180, Vacuum conveyor: PPC250VS, Product feeding: Bag emptying, Filling volume vacuum conveyor/product feeding station: 17l/400l. Machine dimensions X/Y/Z: approx. 1000mm/750mm/2200mm, Weight: approx. 250kg. Documentation available. An inspection on site is possible. Itodpfezidh Usx Ahbsn

Condition: new, functionality: fully functional, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Nanjing Estun, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 0.5 °, stroke rate (min.): 15 1/min, stroke rate (max.): 15 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge speed R-axis: 40 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 400 V, oil tank capacity: 220 l, overall weight: 7,000 kg, total length: 3,950 mm, total width: 1,700 mm, total height: 2,150 mm, number of support arms: 3, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, QC11K-8/3200 Guillotine shearing machine The frame adopts an all-steel welded structure, boasting sufficient strength and rigidity. Internal stresses are eliminated through normalizing and high-frequency vibration treatment to ensure the overall precision of the machine body. German large-scale floor-type boring and milling machines are employed for precision machining using a one-time processing method, guaranteeing exceptional machining accuracy. It features a hydraulic swing-type structure with an upper tool rest return device powered by nitrogen cylinders, enabling fast return speeds. The hydraulic system utilizes an integrated logic circuit controlled by sequence valves, ensuring stable operation, low noise, and straightforward maintenance. Tool rest movement is regulated by hydraulic valves for precise control. The material pressing device incorporates an integrated circuit and independent parallel clamping cylinders. When dealing with uneven sheet metal, the cylinders can expand and contract freely to securely clamp the material. The clamping force is adjustable according to the sheet material and thickness, preventing any damage to the sheet surface. Motorized adjustment allows for quick setting of the blade gap, offering simple operation to adapt to shearing requirements of different sheet thicknesses and materials. Iodpfsy Uquhsx Ahbetn Control is achieved through a numerical control (NC) system, enabling fixed-stroke shearing operations. An optical line alignment device facilitates scribed line shearing for enhanced accuracy. The electrical control system is centralized and reliable, with the following key features: All power facilities are installed within the machine body, operated and controlled via buttons on the control panel. A foot switch is provided for direct and convenient operation of the shearing action. Core electrical components are sourced from Schneider for guaranteed quality and reliability. Circuit breakers are installed to protect the control circuit against short circuits. Motor thermal-magnetic circuit breakers provide protection against motor overload and short circuits. The hydraulic system is designed for safety and reliability: The hydraulic system manifold block is equipped with a direct-acting safety relief valve to ensure accurate pressure adjustment. A pipeline check valve is specially installed at the pump head to protect the oil pump from hydraulic shock. Both upper and lower blades are made of high-quality materials and undergo full heat treatment, ensuring sufficient hardness and a long service life. The ball-rolling worktable and front material supporting device facilitate easy feeding while preventing scratches on workpieces during operation. The CNC back gauge device is equipped with high-performance servo motors, drives, precision ball screws, and linear guides, achieving a positioning accuracy of ≤±0.1mm. For the CNC electrical system:The back gauge is controlled by the E21S simple CNC system. Users can directly input the desired values, and the back gauge automatically moves to the specified position upon confirmation. Transmission is achieved through a motor-driven precision lead screw and nut assembly, with digital display via a counter. Fine-tuning for free size correction is not configured to ensure shearing precision, with an error of ≤0.2mm per meter. Three front support arms are fixed on the worktable, providing convenient placement for shearing materials.

Condition: excellent (used), Year of construction: 2018, HS Flex 20 station pallet loader. Isdpfx Ahozghngjbotn XYZ: 600 x 550 x 330mm, Maximum workpiece diameter 450mm, maximum workpiece height 355mm, Maximum table load 300Kg, A axis -/+ 115 degrees, spindle taper HSK 63, spindle speed 15,000rpm, 30 station tool changer, Heidenhain TNC 640 control, with swarf conveyor , and high pressure coolant.

Condition: used, Year of construction: 1986, machine/vehicle number: 275590, Ref. No. 25362 Technical Data: - Drilling capacity 25 mm - Drill spindle taper MK 3 - Drill spindle speeds 100 / 205 / 345 / 440 rpm 695 / 885 / 1450 / 2900 rpm Isdeyf Ehijpfx Ahbetn - Drill spindle stroke 130 mm - Drill spindle reach 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis: 415 mm Y-axis: 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space required approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vice

Year of construction: 1985, condition: ready for operation (used), Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible. Iedpfsy U Nqnex Ahbstn

Condition: good (used), Year of construction: 2005, machine/vehicle number: 12345, functionality: fully functional, Used hydraulic forging hammer Manufacturer: LASCO Type: HOU 250 SO Itedpfx Aszidv Sohbjn Year of manufacture: 2005 Impact energy 40 kJ, ram stroke 710 mm, ram weight 3,000 kg, machine foundation with spring damping elements, conveying system by STAHLMANN, two-module design, work platform, automatic feeding, infeed and outfeed, water cooling.

Condition: good (used), Year of construction: 2009, control FANUC 18i-TB Control x-axis 0 mm z-axis 0 mm spindle taper 0 number of spindle speeds 0 engine output 0 kW weight of the machine ca. 8.200 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m DOOSAN PUMA TL 2500LM with IFS extraction system, multi-turret turning centres for shaft machining The PUMA TL series stands out thanks to its innovative design, featuring both upper and lower turrets. This advanced configuration makes it the ideal choice for the demanding machining of shafts, such as camshafts and crankshafts. Thanks to the capability for simultaneous 4-axis machining, complex machining processes can be carried out precisely, efficiently and in a single operation. --> Technical Specifications Mains connection: AC 200/220 V, 3-phase with earth, 50/60 Hz --> Rated power: 52.33 kVA Itedpfx Ahjzvq Dpoben --> Max. connected load: 22.0 kW --> Full-load current: 137.33 A --> Short-circuit current: 33.0 kA --> Max. turning diameter: 350 mm --> Max. turning length: 700 mm --> Spindle bore: 76 mm --> Main spindle: Integrated motorised spindle drive with oil cooling --> Tool holder: VDI 40 --> Number of turrets: 2 --> Tool stations: 20 (12 upper / 8 lower) --> Tailstock: Hydraulic --> Lubrication: Automatic centralised lubrication --> Coolant system: Separate coolant tank, 210 litres --> Machine bed: Meehanite cast iron bed with hardened box-type slideways --> Chuck: Hydraulic chuck Manufacturer: SCHUNK --> Type: ROTA NC 315-86 --> ID No. > Design: 3-jaw wedge-hook power chuck --> Chuck diameter: 315 mm --> Through-bore: 86 mm --> Piston stroke: 25 mm --> Stroke per jaw: 5.8 mm --> Max. clamping force: 155 kN --> Max. actuating force: 58 kN --> Max. speed: 3,500 min?¹ --> Jaw pitch: 1/16" × 90°

Condition: excellent (used), functionality: fully functional, LATHE FOR WORKSHOP USE For sale is a Drechselmeister Twister FU 200 lathe with a center distance of 715 mm. This lathe, which was used in a workshop setting, is in very good condition. Technical data: - Center height 200 mm - Turning diameter 395 mm (with optional external turning attachment, 700 mm) - Center distance approx. 715 mm (optionally extendable) - Spindle connection M33 x 3.5 with ASR (Euro) drain safety groove* - Spindle and tailstock taper MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with trapezoidal thread), prepared for ER-25 boring quill - Motor 1.5 kW / 2 hp (connection 230 V) - Brake switch, 2-stage - Weight of base model 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, machine tool, woodturning lathe, turning, lathe tool, woodturning, turning, machine Reference: Turning at B. Itodjzn Nm Topfx Ahbjn