Used Direct Acting Compressed Air Press for sale (39,516)

Condition: good (used), Mäder DLP 1700 HV Direct-acting compressed air press Press Direct-acting compressed air presses are used wherever the compressive force is required constantly over a longer distance or where a large immersion depth is required: e.g. when pressing in pins, bushings and ball bearings or when deforming. DLP 1700 HV Direct acting compressed air press Tedpfxjd Tam No Amyja Pressure force at 6 bar: 17 kN Working stroke: H mm: 40/60/80 More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Tsdeu D Tz Ujpfx Amysa Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 pieces available, price per piece

Condition: good (used), Year of construction: 2011, input voltage: 230 V, Pneumatic corner clamp. Todpfx Ajy Twnxjmysa Knives for Reynaers systems, included.

Condition: used, Pneumatic press, compressed air press BOSCH Type Manufacturer’s No. Year of manufacture 1980 Pressing force: 18 kN = 1.8 tons at 5 bar 15 kN = 1.5 tons at 4 bar 12 kN = 1.2 tons at 3 bar 8 kN = 0.8 tons at 2 bar 6 kN = 0.6 tons at 1.8 bar Overhang: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 Ram surface: Ø 45 mm Maximum installation height: 235 mm Todpfxsh U Dtuo Amyja Arbor hole: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force can be continuously adjusted via a pressure regulator - Pneumatic cylinder with ram, height adjustable by 90 mm - Pneumatic two-hand operation - Mounted on a metal frame with wooden plates Space requirement L x W x H: 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight with table frame: 140 kg In good condition

Condition: used, Compressed air adsorption dryer, activated carbon adsorber with post-filter BOGE type DAZ 5-2 For particularly dry air Manufacturer no. 38315449 Year of manufacture 2013 Volume flow max. 250 liters/min. = 15 m³/h Operating pressure max. 16 bar Connection thread G 1/4“ Mains connection 230 volts, 50 Hz - Pre- and post-filter Space requirement L x W x H 400 x 210 x 580 mm Weight 15 kg Tsdpfxovrkhko Amyea good condition

Condition: good (used), Motor output 1 kW Todpfx Aevwgn Rsmyea Max. pressure 16 bar

Year of construction: 2016, condition: excellent (used), machine/vehicle number: 16, Used ALMIG ALM 180 air dryer Year 2016 used good condition immediately available Volume: 2,67 m³/min Tedeffyctjpfx Amyea working pressure 7 bar maximum working pressure 16 bar connection : 1" elektrical voltage : 230 V Elektr. power: 0,60 kW Dimension and weight: height: 601 mm width: 393 mm length: 891 mm weight: 53 kg

Condition: used, Year of construction: 2003, tank capacity: 1,000 l, usable tank capacity: 1,000 l, operating temperature: 50 °C, operating pressure: 11 bar, pressure (max.): 11 bar, overpressure (max.): 16 bar, We are offering this used OKS compressed air tank, manufactured in 2003, for sale. Serial number: 500417 Capacity: 1000 L Minimum operating pressure: 0 bar Maximum operating pressure: 11 bar Test pressure: 16.0 bar Todpfxezqp E Uj Amyja Minimum operating temperature: -10 °C Maximum operating temperature: 50 °C Year of manufacture: 2003 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KAESER TE91 refrigerant dryer capacity: 9100 l/min; Todpezp Hzqofx Amysa year of manufacture: 2008. net price: 6900 PLN gross price: 8487 PLN

Condition: excellent (used), functionality: fully functional, KAESER TF203 desiccant dryer Tsdpfjzp Hmgjx Amyja Capacity: 21,000 m³/min. The dryer is in perfect working order. Net price: 9,700 PLN Gross price: 11,931 PLN

Condition: used, Year of construction: 2011, Manufacturer: BEGA capacity: 21 m3/min Todpfsuk A Ensx Amyea

Year of construction: 2003, condition: good (used), Capacity: 350 m³/h Tedpfx Aofl Ig Rjmyoa

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer a galvanized air receiver – 5000 liters. Manufacturer – OKS Otto Klein GmbH – Kaeser. Maximum working pressure – 11 bar. Year of manufacture: 2019. Dimensions: Diameter – 1400 mm Height – 3570 mm Weight – 1050 kg Tsdpjzpxbvsfx Amyea The air receiver includes fittings – overpressure valve, pressure gauge + flanges. A data sheet is included with the air receiver.

Condition: like new (used), Year of construction: 2015, COMPAIR F 0260 HS refrigerant dryer CAPACITY: 26 m3/min Tedpfx Aezpbtnomysa Year of manufacture: 2015 DRYER IS IN FULLY OPERATIONAL CONDITION.

Condition: like new (used), Year of construction: 2019, KAESER TF340 dryer, serial no. 2509 S016921 MANUF. KAESER TYPE TF340 S/N 2509 YEAR 2019 POWER (kW) 2.87 CAPACITY (m3/min) 34 PRESSURE (bar) 16 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER BUILT-IN DRYER R134a 2.6 kg EXCHANGER Tjdpfxjzn U Szj Amyoa COOLED (AIR/WATER) ON TANK DOCUMENTS: no NEW/USED: USED DN80

Condition: new, Year of construction: 2026, 270 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 270 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 270 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 5 connection ports with diameters of 1", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands chemical and atmospheric factors. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in the Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection Ports: 5 pcs – diameters: 1", 2", 1/2" Nameplate with CE Mark Todpfx Amoxbzaleysa UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Condition: new, Year of construction: 2026, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 500 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1.1/4", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands both chemical and atmospheric conditions. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in both Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Precision and Efficiency – Stable Pressure and Optimized Compressor Operation Tjdpfjxby D Ajx Amysa Thanks to its large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of air-powered devices and significantly extends compressor lifespan by reducing the number of start-stop cycles. The vertical design allows for space-efficient installation, which is especially important in facilities with limited room. A properly matched tank helps minimize pressure drops and prevents pneumatic system overloads, resulting in greater efficiency and enhanced safety across the entire installation. Standard Equipment Connection Ports: 6 pcs – diameters: 1.1/4", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Year of construction: 2026, condition: new, functionality: fully functional, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 3800 l/min Todpfx Aemt Dcqemyoa Power 0.9 kW Supply voltage 230 V Dimensions (L x W x H) 850 x 480 x 480 mm Weight 59 kg Type and amount of refrigerant R410a, 650 g

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Todpfsmt Dcfsx Amyea Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 2800 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Type and amount of refrigerant R134a, 550 g

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Tsdpjmt Dbhefx Amyja Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 1500 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Type and amount of refrigerant R134a, 400 g The price given is a NET price. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Refrigerant dryer ALUP ADQ 2100 Tjdpfxezmwr Ie Amyoa capacity: 35,000 l/min; year of manufacture: 2017. net price: 19,500 PLN gross price: 23,985 PLN

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake nozzle: 300 mm Engine rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volumetric flow rate: 6000 m³/h Nominal volumetric flow rate: 5,089 m³/h Negative pressure: 2,587 Pa Filter area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting capacity: 30 - 50 kg/h Briquet diameter: 50 mm Weight: 1570 kg Machine is brand new and in stock at our warehouse. - AVAILABLE IMMEDIATELY - Subject to prior sale Todpjh D If Hofx Amyoa Location: 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2022, The freeze dryer was only used for demonstration purposes. (Like new) Volume flow: 1.25 m³/min Connection: G 3/4" Immediately available. Tjdpfx Amezmt Skoysa

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Used Atlas Copco FD310 refrigerant dryer Tsdpfxszkvbpj Amyoa 6.48 m3/min 14 bar Year of manufacture: 2021

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Auction of two Kaeser screw compressors, one Kaeser refrigeration dryer, and one compressed air tank! Tjdpfxezktnyj Amyja Screw compressor Kaeser SK 22 Year of manufacture: 2020 Screw compressor Kaeser SK 19 Year of manufacture: 1995 Refrigeration dryer Kaeser TB 26 Year of manufacture: 2016 Compressed air tank Volume: 500 l Year of manufacture: 1986