Used Dilo Version L170R1Bbb0B0 (B176R) for sale (4,430)

Condition: used, Year of construction: 2018, operating hours: 278 h, functionality: fully functional, type of input current: AC, total width: 1,015 mm, total length: 2,250 mm, total height: 1,210 mm, overall weight: 935 kg, input voltage: 400 V, We offer this used DILO SF6 service cart L170R01+Storage Tank, type Version L170R1BBB0B0 (B176R), year of manufacture 2018. Technical description (seller Lund University/Accelerator Laboratory Equipment) SF₆ liquefier and a separate 1000l storage tank for liquid SF₆. The equipment is mounted on wheels and is intended for handling SF₆ in gaseous and liquid form. The stated operating time for the liquefying compressor itself is 278 hours, referring to the time during which the machine has actively been liquefying SF₆. The pumps used for vacuum pumping/recovery of SF₆ have a higher total usage time, but the exact value is not known. Total cycle time may vary depending on tank size and process conditions. For a large SF₆ tank, a complete cycle may take approximately 12–24 hours, while a smaller tank may be handled within a couple of hours. This description is based on information supplied by the seller. The storage tank is specified for a maximum filling of 1,000 litres, corresponding to approximately 980 kg, and is included, possibly together with 224 kg of SF₆ in gaseous and liquid form:INCLUDED. Item and key data Equipment SF₆-liquefier and storage tank for liquid SF₆; all equipment on wheels. Producer DILO Armaturen und Anlagen GmbH, Germany Version L170R1BBB0B0 (B176R) MAT 1037463 Pgjdpsz E H Dhsfx Ag Rou Year 2018 Reference price EUR 88,019.19 (2017 new price, as stated in the supplied information). RESERVE PRICE: 45000 EUR. Lower bids will not be accepted. (Plant is very little used at University) The item will be sold to the highest bidder, provided that the reserve price has been reached and all other sales conditions are fulfilled. The buyer is responsible for and pays for all transport from Lund University’s handover location. Costs for loading, packing, transport, insurance and other related measures are borne by the buyer unless otherwise expressly stated. Bidders are advised to assess the condition, functionality and suitability of the equipment themselves before submitting a bid. The equipment is offered in its existing condition based on the information available. At the buyer’s request, Lund University may assist with a test run/demonstration at the buyer’s site. The buyer shall cover all costs associated with the university’s participation, including travel and hotel costs. The sale may also includes 224 kg of liquid and gaseous SF₆. The buyer is responsible for ensuring that handling, transport, receipt, storage and use comply with all applicable requirements and regulations, certificates and so on, in force.

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Pjdpfx Ajz Tf D Reg Rsgu Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: excellent (used), Year of construction: 2014, ARBURG A 370 S 700-290 U-Version (S&P 3804) Manufacture year: 2014 Operating hours: 41,257 Stunden Screw: 40 mm Injection pressure: 1530 bar Pjdpfx Ago Af Ryks Regu Stroke volume: 188 cm³ Clamping Force: 70 t Tie bar distance: 370 x 370 mm Mould installation height min.: 200 mm Plate distance max.: 600 mm Dimensions: 3700 x 1400 x 2000 mm Eeight: 3580 kg Connected load: 15 kW U-Version = clamping and injectionside could be turned into vertical and horizontal position, 1 x corepuller, 6 x hotrunner, Airvalve, Interface colorizing, 23.761 h automatic and 17.496 h manual... Price: on request contact: Mr. Ralf Schulz

Year of construction: 2000, condition: ready for operation (used), 3 Dilo needle looms are offered. 1) Pre-needling and finish-needling machine Dilo, DILOOM OD-II HVL 55, year of manufacture: 2000, number of needle boards: 2, working width: 5500mm, max. stroke frequency: 1000strokes/min, needle beam stroke: 60mm, needle board width: 200mm each, needle distribution range: approx. 3000-5000needles/m. 2) Double needle loom Dilo, DI-LOOM OUG-II S50, year of manufacture: 2000, working width: 5000mm, number of needle boards: 4, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle density: approx. 18000needles/linear m. 3) Pre-needling and finish-needling machine Dilo, DI-LOOM OD II 55, year of manufacture: 1998, working width: 5500mm, needling system: Downstroke, number of needle boards: 2, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle board width: 200mm each. Inspection possible by appointment. Pgodpfx Agezhntrj Rou

Condition: ready for operation (used), Year of construction: 1995, A custom-built multi-stage nonwoven line for the production of two-layer or multilayer technical nonwovens made of synthetic or natural fibers with free-flowing materials such as herbs or seeds is available. Material weight range: approx. 100g/m²-1000g/m², needle machine manufacturer: Dilo, max. roll width: 2100mm, max. production speed: 200m/h, needling capacity: approx. 1200strokes/min, main motor: 45kW Siemens, total system dimensions X/Y/Z: approx. 10m/4.5m/4.5m. Process steps: nonwoven web feeding, carrier nonwoven feeding, material feeding (herbs), material dosing, material distribution, top nonwoven laydown, needle station, cutting/to length cutting, winding/rewinding, dust extraction. Documentation available. An on-site inspection is possible. The line is complete including accessories, peripheral equipment and a small sample needle machine. Pgsdpfxoyt N Dqo Ag Reu

Year of construction: 1990, condition: ready for operation (used), A complete nonwoven fabric production line including peripheral equipment and a complete pre-blending line is available. 1) Pre-blending line with carding opener Houget Duesberg Bosson, year of construction: 1972, working width: 1500mm, drum: 1, worker-stripper pairs: 3, doffer: 1, feed rollers: 2, total line dimensions X/Y/Z: approx. 11000mm/1800mm/3100mm, operating hours: approx. 16414h, including feed table and bale opener. 2) Filling chute Spinnbau Bremen, year of construction: 1989, machine dimensions X/Y/Z: approx. 4000mm/2600mm/6250mm. 3) Weighing conveyor with vibrating chute Protec. 4) Card Hergeth, year of construction: 1990, working width: 2500mm, feed rollers: 2, feed roller diameter: 94mm, licker-in roller diameter: 413mm/550mm, worker-stripper roller diameter: 219mm/123mm, transfer roller diameter: 550mm, main cylinder diameter: 1500mm, doffer diameter: 850mm, compaction roller diameter: 260mm, pressure roller diameter: 2500mm. 5) Crosslapper Autefa Topliner CL 4000/4002 - WebMax, year of construction: 2006, min. fineness range: 0.7dtex, fiber types: chemical/natural/regenerated/blends, max. web weight: 100g/m², max. web weight with crosslapper: 5000g/m², max. laying width: 3500mm, working width: 2500mm, max. laying speed: 130m/min, lapper lift: 100mm, machine dimensions X/Y/Z: approx. 3850mm/8800mm/2200mm. 6) Drafting unit, working width: 2500mm, machine dimensions X/Y/Z: approx. 1600mm/3650mm/1650mm. 7) Double needle loom Dilo CBF 31/HVSL 31, year of construction: 2007, max. working width: 3100mm, stroke frequency: 1375/min, needle beam stroke: 60mm, horizontal beam stroke range: 0mm-6mm, number of needles per 1m working width: approx. 15430, machine dimensions X/Y/Z: approx. 3350mm/5150mm/4500mm, weight: approx. 38000kg. 8) Web accumulator Suchy WOB 3200, storage volume: 40m³, web weight range: 50g-2000g/m², max. working speed: 40m/min, max. production speed: 20m/min, working width range: 1000mm/3000mm, roller top width: 3200mm, machine dimensions X/Y/Z: approx. 4300mm/5050mm/5300mm. 9) Slitting unit Suchy, year of construction: 2006, weight: approx. 250kg. 10) Climbing roll winder, winding roller diameter: 350mm, min. winding diameter: 3inch, max. winding diameter: 1500mm. 11) Edge trimmer Hepp-Schwamborn. 12) X-ray measuring device Protagon Q6. This is a complete and automated nonwoven fabric production line starting from fiber bales. Documentation available. An on-site inspection is possible. Expected to be available from the end of March 2026. Psdsymfc Ajpfx Ag Rsgu

Condition: used, Year of construction: 2008, operating hours: 3,096 h, functionality: fully functional, machine/vehicle number: 1069140, overall weight: 4,500 kg, spindle motor power: 14,900 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, HAAS VF-4BHE Vertical CNC Machining Center – 2008 We offer for sale a used HAAS VF-4BHE vertical CNC machining center, manufactured in 2008. Since its purchase, the machine has been used by a single group of companies, operating on one shift and primarily employed for machining aluminum. The machining center is in full working order, has no history of accidents, and is maintained in good operational condition. Technical specifications and equipment: - Manufacturer: HAAS - Model: VF-4BHE Psdpfxe Afypko Ag Rogu - Year of manufacture: 2008 - Type: Vertical CNC machining center - Technical condition: fully operational - Servo drive operating time: 3,096 h - Motion time: 594 h - Spindle operating time: 656 h - Tool measurement: Renishaw tool sensor - Part probing: not available - Control software version: M16.10A Terms of sale: The seller does not provide machine loading services – the organization of loading and transportation is the responsibility of the buyer.

Year of construction: 1978, condition: ready for operation (used), Working width: 2500mm, needle beam stroke: 60mm, max. stroke frequency: 1200/min, drive motor power: 22kW, number of needle boards: 6, length: 1100mm, width: 3800mm, height: 2020mm, weight: 5.2t. Without electronics, spare parts: needle beam, gearbox, bearing housing, bearings, and others. An on-site inspection is possible. Psdpsxtpq Nofx Ag Rsgu

Condition: reconditioned (used), Year of construction: 2002, Folding machine CAS 52 Pgodpfe Ad R Ubex Ag Rju The machine has been overhauled with new folding rollers, rollers, alignment belt, and belts. It has its own control system with 4 automatic pockets. Roller settings are automatically calculated in the menu based on the product thickness and can also be adjusted manually via the menu. Synchronized output 60 jobs can be saved Machine manufactured in 2002 Original operating hours: 8.1 million – almost new condition Soundproofing renewed Original images after unloading 380 volts

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 88462-85, travel distance X-axis: 760 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 42,000 rpm, controller model: RÖDERS RMS 6 Version 4.20, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Control system: RÖDERS RMS 6 Version 4.20 Travel range, X-axis: 760 mm Travel range, Y-axis: 550 mm Travel range, Z-axis: 300 mm Table dimensions: 860 x 550 mm Max. workpiece weight: 800 kg Feed rate: 0 to 30,000 mm/min Positioning accuracy: 0.005 mm Spindle speed: 42,000 RPM MACHINE DETAILS Control system: RÖDERS RMS 6 Version 4.20 Dimensions & Weight Dimensions (L x W x H): 5,000 x 3,000 x 2,700 mm Weight: 7,000 kg EQUIPMENT Podoz Iludopfx Ag Regu 2 EROWA clamping systems Additional suitable accessories Cooling system Extraction system Work bench with fixtures 3D measuring probe External reference: Alesco - Lot 62

Year of construction: 2017, condition: used, Maximum placement speed: 16,000 components/hour IPC net placement speed: 13,800 components/hour Placement system: HYDRA Tools: 8 Max. component dimensions (X/Y/Z): 56 / 56 / 15 mm Max. component weight: 140 g Min. PCB size (X/Y): 70 / 50 mm Max. PCB size with T3 (X/Y): 443 / 508 mm Min./max. PCB thickness: 0.4 / 6 mm Max. PCB weight with T3: 5 kg Feeder capacity with T3: 112 × 8 mm feeder positions Conveyor height range: 880–975 mm Operating hours: approx. 7000 h Placement time: approx. 3000 Pgodjzzlq Ujpfx Ag Rou

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: E31VI16128026325, This is a VarioCooking Center VCC 311 Dynamic tilting pan from the premium manufacturer Rational, with only 35 kW (instead of 45 kW). The VCC has undergone a thorough inspection in our in-house workshop, and the unit is fully functional. The basic equipment is not included in the price and can be purchased for an additional cost. Example photos, original images, will follow shortly. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection & expert cleaning. Checked & fully functional. Flexible shipping or self-collection options. Competent advice - before and after the purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. The VarioCooking Center MULTIFICIENCY® combines the functions of conventional cooking appliances such as a stove, grill plate, fryer, tilting pan, and kettle in one. In addition, the Plus version has a pressure mode. This offers you the possibilities of cooking, frying, and deep-frying in a confined space, without supervision, and with perfect cooking results. Technical data: W x D x H: approx. 1542 x 914 x 1100 mm Power connection: V: 400 / kW: 35 / Hz: 50 Weight: approx. 279 kg Serial number: E31VI16128026325 Year of manufacture: 2016 Condition: used, inspected, fully functional Pgedpfx Age Afx Rme Rsu Equipment: Cooking process control via microprocessor Integrated socket Integrated hand spray with automatic retraction and stepless spray dosage Core temperature sensor with 6 measuring points Drainage of cooking or washing water, directly through the pot (without tilting, without floor drain) (only pot) VarioBoost™ patented heating system VarioDose™ automatic, liter-precise water filling device Integrated on/off switch Touchscreen with self-explanatory symbols for easy operation and help function Additional functions can be selected with the push of a button Plain text displays for all cooking processes Adjustable foreign language display for device messages Temperature unit can be set to °C or °F Central control dial with "push function" to confirm entries and easy-to-clean push buttons Digital temperature displays Display of target and actual values Digital timer 0-24 hours with continuous settings, optional setting hours/minutes or minutes/seconds 24-hour real-time clock Tone can be adjusted Display contrast can be adjusted Operating and warning display, e.g. hot oil during frying Safety temperature limiter Drip tray Patented core temperature sensor holder USB interface Material inside and outside CrNi steel DIN 1.4301 Seamless, hygienic pot with rounded corners Cooking pot or VarioPan™ can be tilted by an electric cylinder Lid with integrated water inlet (only pot) Service diagnostic system with automatic display of service messages Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: excellent (used), Year of construction: 2013, KRAUSSMAFFEI KM 1600-17200 MX Blu Power Injection Molding Machine Year of manufacture: 2013 Clamping force: 16,000 kN (1,600 tons) Control system: KraussMaffei MC6 TECHNICAL SPECIFICATIONS 1. Basic data - Manufacturer: KraussMaffei - Model: KM 1600-17200 MX Blu Power - servo - Year of manufacture: 2013 - Machine type: hydraulic injection molding machine for processing thermoplastic materials - Clamping system: fully hydraulic - Clamping force: 16,000 kN (1,600 tons) - Injection unit: 17200 - Control system: KraussMaffei MC6 2. Clamping unit - Clamping force: 16,000 kN (1,600 tons) - Opening force: 1,120 kN - Dimensions of the mounting plates (H × V): 2,550 × 2,100 mm - Column spacing (H × V): 1,870 × 1,420 mm - Opening stroke: 2,700 mm - Minimum mold height: 700 mm - Maximum mold height: 1,600 mm - Maximum daylight: 3,400 mm - Ejector stroke: 350 mm - Ejector force (forward / backward): 300 / 150 kN 3. Plasticizing unit - Complete plasticizing unit for thermoplastics - Screw diameter: 135 mm - Screw length ratio L/D: 23 - Plasticizing unit in abrasion-resistant version - Screw check valve - Open nozzle Pgedpj Af I U Nofx Ag Rsu 4. Injection unit - Injection unit type: 17200 - Screw diameter: 135 mm - Injection volume: 9,662 cm³ - Injection shot weight (PE): 6,860 g - Maximum injection pressure: 1,784 bar - Nominal screw speed: 81 rpm - Maximum screw speed: 100 rpm 5. Hydraulic and electrical system - Main motor power: 160 kW - Installed heater power: 93 kW - Number of heating zones: 7 - Number of dry cycles according to EUROMAP 6: 648 cycles/h - Hydraulic oil tank capacity: 2,400 l 6. Machine dimensions and weight - Length: 14,170 mm - Width: 4,040 mm - Height: 2,930 mm - Net weight including control cabinet: 92,000 kg (92 tons)

Condition: good (used), functionality: fully functional, power: 11.03 kW (15.00 HP), 3000 mm cutting length – suitable for cutting aluminum or for cross-cutting – power 7.5 kW, n = 2700 rpm, blade diameter 500 mm – cutting height 170 mm. Pgjdpfx Agjz A Sv Ds Rsu

Condition: like new (used), functionality: fully functional, machine/vehicle number: 1904P201, Year of construction: 2019, input voltage: 380 V, input frequency: 50 Hz, BigRep PRO – Industrial Large-Format 3D Printer | Professional FFF/FDM Printer - Information - (The printer will be inspected and adjusted/configured again by qualified personnel before sale. During this process, it is also possible to update the firmware and software add-ons, thus bringing the printer up to the latest version if required.) - Machine Description - For sale is an industrial large-format 3D printer, the BigRep PRO, manufactured by BigRep. The system is designed for the additive manufacturing of large-volume components, prototypes, functional models, and customized parts. Due to its large-format printing volume, the machine is particularly suitable for companies that want to manufacture large-sized components economically and with a high degree of design freedom. Compared to manufacturing on smaller 3D printers, correspondingly sized components can be manufactured in larger, continuous segments or – depending on the geometry and material – as complete components. The system offers a wide range of applications in industrial product development, mechanical and plant engineering, model making, and the production of jigs, fixtures, and customized plastic components. - Application Areas and Advantages - The BigRep PRO is particularly interesting for the production of large-format plastic components and the flexible production of individual components. Typical application areas are: Production of large-volume prototypes and functional models Manufacturing of housings, covers, and structural plastic parts Production of models for design, architecture, and industrial development Manufacturing of jigs, fixtures, and production tools Development and manufacturing of customer-specific components Small-series production and individual spare parts production Manufacturing of components for mechanical and plant engineering Additive manufacturing enables the rapid implementation of individual designs and offers interesting economic advantages, especially for complex geometries and small quantities. Psdpfxo Afyybj Ag Rogu - Sale - The BigRep PRO is offered for sale due to a company restructuring. The machine is suitable for companies that want to expand their capabilities in additive manufacturing or enter the industrial large-format 3D printing market. If you are interested, we are happy to provide further information. An inspection of the system is possible by prior arrangement.

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 12 kg, arm reach: 1,441 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (A-Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: three-phase, repeat accuracy: 0.02 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information: Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-12D is based on Fanuc M-10iD/12 robot arm suitable for middle size machines and specifically adapted for handling vices. It consists of: 1) Robot: - Fanuc robot M-10iD/12 6-axis vertical robot Load capacity 12 kg / reach 1441mm R-30iB Plus controller A-cabinet I/O modules; DI16 / DO16 DCS Dual Check Safety Position (J567) Soft Float (J612) Touch Skip (J921) Singularity Avoidance (R792) User Socket Messaging (R648) Karel (R632) Pgedpo Af Iiwjfx Ag Rou 2) Drawer palletizing system: Usable space per one drawer: 1000 x 480mm Max 5 drawers (depends on the height of the pieces) Load capacity of one drawer: 250 kg Reer safety light curtain, cat.4 Drawer opening possible from both sides LED status beacon Electrical cabinet and cables 3) Safety Options The Cage is our standard solution. All URC cells can also be delivered in the "Laser" version, which is designed for optimal accessibility. The price of the cells remains the same regardless of the chosen version. - Cage (Standard) - Omron Laser (Alternative) - Reer Light Curtain (Standard) 4) Interface to the Haas machines Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged) Communication CNC < = > URC, I/O, M-fin, safety Preparing for a Clamping device (2nd clamping device available) Preparing for a PAD Preparing for an external Air Blow 5) Gripper Configuration The Teximp Gripper Interface includes everything needed for clamping parts on the robot side. - Gripper carrier 90° Schunk Gripper JGP-P 100-2 (2 pcs) Stroke per jaw [mm] = 5 Recommended workpiece weight [kg] = 8.75 ABR-PGZN-plus 100 blanks made of aluminum for rework by the customer Sensors G1/G2 - clamped/unclamped Blower nozzle Other possibility: - Gripper carrier 180° Schunk Gripper JGZ 100-1 (2 pcs) Stroke per jaw [mm] = 10 Recommended workpiece weight [kg] = 9 Sensors G1/G2 - clamped/unclamped (4 pcs) Blower nozzle 6) Automatic Door system Our robot cell includes an Auto Door for any Haas machine, with two available solutions: the original Haas Smart CAN DC Auto Door for machines built in 2020 and later, or Teximp’s Pneumatic Auto Door for older machines. PAD-HaasVF-side PAD-HaasVF-front PAD-HaasMM-front PAD-HaasST PAD-HaasUMC - PADs for machines without the original side door/window are also available. 7) Programming Option (HMI) Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Operators can easily adjust jobs for different products/parts and then save them as "Recipes", enabling a complete robot setup change with just one click on the screen. This simplifies the programming process and minimizes downtime. - Easy visual programming - No additional hardware required Note: - We provide transport, installation, commissioning and operator training at additional cost. - You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.

Condition: used, Year of construction: 2012, Edge banding machine Manufacturer: Homag Type: KAL 211 Year of manufacture: 2012 Technical data Feed rate: 18-25 m/min; with FK11 max. 20 m/min Working height: approx. 950 mm Machine length: approx. 7,845 mm Workpiece thickness: 12-40 mm standard; version up to 60 mm Edge material roll: approx. 0.3-3 mm Edge material strip: approx. 0.4-6 mm Roll diameter: max. 830 mm Pneumatics: 6 bar, Electrical: 400 V / 230 V, 3 phases, 50 Hz Units / Equipment - Release agent spray unit top/bottom - Joining milling unit - Gluing unit - 2-roll edge magazine - Pressure zone - Trimming unit HL81 - Pre-milling unit BF10 Pjdpo Af Ip Dsfx Ag Rjgu - Profile milling unit FK11 - Profile drawing blade PN10 - Finishing unit with glue joint drawing blade and buffing unit - Preparation for HOMAG 1 laserTec - powerControl PC22 with touchscreen - Automation packages - In addition, drawing blades for both 2mm and 1mm edges are available. PUR retrofit 2023 In 2023, the machine was retrofitted with a PUR gluing system from GP Service, type EasyPUR AC 34, as well as a RIEPE spray system, type LP289/99 24 V. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Description: The machine is in good technical condition, and can be tested upon prior arrangement. It features a Haas CNC control system, often a 32-bit version for this model year. Travel distances for X/Y/Z axes are 1016 × 406 × 406 mm, or 40" × 16" × 16" in inches. Table dimensions are 1467 × 267 mm / 57.75" × 10.5". Spindle taper is CAT/CT 40 or BT 40. Spindle speed ranges from 0–4000 rpm. Spindle power is 5.6 kW / 7.5 HP. The spindle drive is belt-driven. Maximum torque is approximately 45 Nm at 1200 rpm. Distance from the spindle nose to the table is 102–508 mm / 4"–20". Rapid traverse rates for X/Y/Z axes are 5.1 m/min / 200 ipm. Maximum cutting feed rate is 5.1 m/min. There are 3 T-slots, each approximately 16 mm wide. Pgedpfxez S H Afe Ag Rju

Condition: used, Year of construction: 2016, operating hours: 2,400 h, functionality: fully functional, • Product type: Long-range/high-resolution fixed laser scanner. • Manufacturer part number: 932500002. • Version/Model: Focus 2 (High Resolution, dual-laser version). Pgjdps Agcw Nefx Ag Rou

Condition: ready for operation (used), Siemens SIMODRIVE 6SN1124-1AA00-0LA2 LT module SN: T-U72045027 Version: A, used, in good condition, fully functional, scope of delivery as shown in the photos Pgsdpfoz Acpqjx Ag Rsu

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Round stock milling machine, Stellmacher, type RST310/3-3 SE, for the production of cylindrical milled wood with a diameter of 150 to 310 mm, with an electric drive of 45 kW for the milling head. The feed rate is adjustable from 1 to 12. There are two roller conveyors on wheels for feeding and removing the wood. Pgodsy Ta Ibjpfx Ag Rou

Condition: used, mileage: 39,700 km, power: 240 kW (326.31 HP), first registration: 08/2011, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro5, total length: 8,500 mm, total width: 2,550 mm, total height: 3,500 mm, Equipment: ABS, air conditioning, soot filter, Vehicle No. for customer inquiries: 215 ----PLATZ Bin Washing System: * Fully automatic cleaning system! * Several sensors defective (error codes..) * 2x 1,000 liter heated tanks * 2-wheel bins = from 60 liters to 240 liters * 4-wheel bins = from 660 liters to 1,100 liters * Recirculated water use * Hot water operation (incl. hot water generation) * Fragrance spraying system * Frost protection system * Fully enclosed * Sink heating * Handle heating * Automatic roller shutter ----Special equipment: * Suspension: Air-air * H03 Air conditioning * FH7 High cab, swing door, passenger folding door * MD9 Cruise control * MB1 Engine brake with constant throttle * Reversing camera * Beacon ----Additional features: * A00 Front axle with air suspension * A96 Traction control system (ASR) * AH8 Axle load measuring system * AL3 Front axle 7.5 t * AM3 Rear axle H7 13.0 t, Crown wheel 300 * AN9 Telligent trailing axle, hydraulically steered * AR8 Axle ratio i = 6.824 (HL7) * B02 Anti-lock braking system (ABS) * B24 Comfort stop brake * B65 Heated air dryer * BB5 Disc brakes on front and rear axles * C67 Steel bumper corners * C71 Rear underrun protection (EC) * C73 Front underrun protection (EC) * CL9 Steering LS 6 / LS 8 * CR4 Mounting parts on frame/hole grid * E39 Circuit breakers * EH1 Lifting/lowering device * EH5 Starting aid, speed limit 30 km/h * EM1 Monitor pre-installation, 24 V, in instrument panel * EM8 PSM, body and trailer CAN, ISO 11992 * EM9 PSM, body CAN, ISO 11898 instead of 11992 * ER0 Radio pre-installation * ET1 Voltage converter 24 V/12 V, 8 A * EU2 CD radio Bluetooth, without mobile phone charging interface * EV5 Pre-installation for telephone, telefax * EZ3 PSM initial parameterization, external * FM2 Tinted windows with band filter * FX6 Electric sun blind, single-piece * FX8 Front mirror, front * FZ7 Immobiliser with transponder * GE6 Automatic transmission 6/3.49-0.65, Allison 3200 P * IC1 Platform chassis * ID4 Rear axle air suspension, lowered frame * IK3 Wheel formula 6x2/4 NLA * IL1 Domestic (Germany) * IL8 Left-hand drive version * IV5 26.0-tonner * JD3 Tachograph, digital EC, rpm record. + add. recorder, ADR * JW5 Telligent maintenance system * JZ1 Tachograph manufacturer VDO * K40 Tank lock * KE9 On-board diagnostics 2, with NOx control * KF0 Main tank 200 l, rectangular, aluminium * KG1 Silencer, small SCR cat, stainless steel * KH8 Muffler, tailpipe downwards Pgodpfx Aewbl Ntjg Rou * KP1 AdBlue tank, 25 l * L16 Fog lights, halogen * L76 Tail light cable set, extended * LB2 Pre-installation for side marker lights * LH2 Tail lights for rear loader * LV1 Pre-installation, warning beacons * M45 Alternator 28 V/100 A * M74 Radiator protection, lower * MD4

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2015, next inspection (TÜV): 08/2026, loading space length: 14,416 mm, loading space width: 2,487 mm, loading space height: 935 mm, total length: 13,840 mm, total width: 2,550 mm, total height: 3,400 mm, Equipment: ABS, SCHWARZMÜLLER J-SERIES – 2X LIFT – FORKLIFT – SAF – VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST ----Vehicle Data* Manufacturer: SCHWARZMÜLLER * Type: S1 * Variant/Version: J02VLN3 / D50E0 * First Registration: 07/08/2015 * Vehicle Type: Trailer > 10 t * Body: Open box Weights* Permissible Total Weight: 39,000 kg * Unladen Weight: 6,050 kg * Axle Loads: 9,000 / 9,000 / 9,000 kg Dimensions* Length: 13,840 mm * Width: 2,550 mm * Height: 3,400 mm Chassis & Axles* 3-axle * SAF axles * Axle 1 & 3 as lift axles * Air suspension * Disc brakes Tires* 385/65 R22,5 160J Body & Equipment* Side boards, folding * Storage box * Onboard forklift Internal Dimensions* Length: 14,416 mm * Width: 2,487 mm * Height: 935 mm ----* EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR - 2000 EUR EXPORT REGISTRATION, CUSTOMS EXW IN 10 MINUTES (APPROVED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS REGISTRATION AND 15 DAYS AUSTRIAN REGISTRATION EURO 1 TECHNICAL DATA SHEET VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to EU and third countries, a deposit of at least 500.00 EUR / 1,000.00 EUR will be charged. Subject to changes, errors and prior sale! You can find more vehicles on our website. Pgsdpoz Amukjfx Ag Rou Sales are exclusively subject to our general terms and conditions – see homepage. Important note – important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and does not therefore constitute guaranteed characteristics.

Condition: excellent (used), Year of construction: 2020, operating hours: 1,743 h, functionality: fully functional, power: 257 kW (349.42 HP), Mobile shredder LINDNER URRACO 75. Pjdpfx Aeydmgdeg Rogu Foldable discharge conveyor, overband magnet, radio remote control. Service new in February 2026.

Year of construction: 2019, condition: used, functionality: fully functional, This is a combination steamer CM 101 from the premium manufacturer Rational, in an electric version. This combination steamer is equipped with a rack with 8 insertion points, allowing you to use deeper containers for a larger quantity per insertion point. This combination steamer was mainly used for reheating food and is therefore in good used condition. The unit has undergone a thorough inspection in our in-house workshop and is fully functional. The base shown in the picture is not included in the offer but can be purchased as an option. The recommended retail price (RRP) is: €9,380 net. You will receive an invoice with VAT shown. These are sample photos; originals will follow shortly. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul / inspection & expert cleaning. Checked & fully functional - or money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, air flow and cooking time. Technical data: Psdpfx Ae Afc Ntog Regu W x D x H: approx. 847 x 776 x 1042 mm Minimum door opening dimensions for transport W x H: 845 x 1050 mm Power connection: 400 V / kW: 18.6 / 50-60 Hz Capacity: 8 x 1/1 GN Weight: approx. 132 kg Serial number: E11MI19112793744 Year of manufacture: 2019 Condition: used, inspected, fully functional Additional information: Possible applications: Steam mode: from 30° C to 130° C Hot air mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: brings food that has been prepared and cooled to the optimal point to serving temperature in the ideal climate. Automatic separation of fat for clean cooking chamber air. Manual cleaning program. 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every type of food. Ventilated 2-pane glass (swiveling for easy cleaning). LED cooking chamber lighting. Core temperature measurement using a probe. Cool-down function. High-performance fresh steam generator (automatic rinsing and emptying). Handheld shower with automatic retraction. Dynamic air circulation. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).