Used Deublin Component for sale (8,127)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Nwodjzy Ndcepfx Af Ssl Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, paper weight (max.): 208 g/m², paper width (max.): 350 mm, paper height (max.): 500 mm, production capacity: 4,500 unit/h, No minimum price – guaranteed sale to the highest bidder! Auction of a brochure production line! TECHNICAL DETAILS Gathering towers Models: Horizon VAC-100a / VAC-100m Number of towers: 2 Stations per tower: 10 Feeder system: Air suction feeder Voltage: 230 V Frequency: 50 Hz Current draw: 10.4 A per section Booklet making and folding module Model: Horizon SPF-200A Voltage: 230 V Frequency: 50/60 Hz Current draw: 3.4 / 3.2 A Booklet making heads: 2 Brochure thickness: up to 4.5 mm Functions: Wire stitching and center folding Front trimmer Model: Horizon FC-200A Function: Automatic front trimming Operating mode: Inline operation with Horizon SPF-200A Cutting quality: High-precision cut Stacking unit Model: Horizon ST-40 Voltage: 230 V Frequency: 50 Hz Current draw: 4.7 A Function: Automatic stacking of finished brochures Production capacity: max. 4,500 brochures/h Feeder stations: 10, expandable to max. 60 Sheet format max.: approx. 350 × 500 mm Paper weight: 52–208 g/m² Booklet thickness: max. 2 mm for saddle stitching Processing: Gathering, stitching, folding, and stacking in one system MACHINE DETAILS Production counter: approx. 1,800,000 brochures EQUIPMENT Nwedpfszy Hhxox Af Sol Horizon VAC-100a gathering tower Horizon VAC-100m gathering tower Horizon SPF-200A booklet making and folding module Horizon FC-200A front trimmer Horizon ST-40 stacking unit Data sheets for the individual components of the system, including further detailed technical data, can be found in the appendix.

Condition: repair required (used), Year of construction: 2014, functionality: limited functionality, type of input current: three-phase, input voltage: 380 V, total length: 1,800 mm, total width: 1,500 mm, total height: 2,550 mm, inner diameter: 320 mm, workpiece height (max.): 75 mm, grinding wheel diameter: 720 mm, overall weight: 2,800 kg, input frequency: 50 Hz, Equipment: documentation/manual, 2014 Lapmaster DSG 720 Double Side Fine Grinding Machine Used 2014 Lapmaster DSG 720 Double Side Fine Grinding Machine for Sale – 720mm Grinding Wheels – 6 Carriers – Siemens SIMATIC Touch Control – Coolant Filtration System Manufacturer: Lapmaster International Model: DSG 720 Machine Type: Double Side Fine Grinding Machine Year: 2014 Control: Siemens SIMATIC Touch Control Condition: In storage, Functional but top grinding plate damaged. Machine Description The Lapmaster DSG720 is a precision double-sided fine grinding machine designed to process both parallel faces of components simultaneously. This type of machine is suited to applications requiring close control of flatness, parallelism, thickness and surface finish. This machine is equipped with 720mm outside-diameter grinding wheels, a 6-carrier workholding system, independently controlled upper and lower grinding wheel speeds and a Siemens SIMATIC touchscreen control. Important Condition Note Nwodpfez E A Icox Af Ssl The top grinding plate / upper grinding wheel assembly is damaged and requires replacement. The machine is therefore being offered with this known defect clearly disclosed. Prospective purchasers should allow for the replacement of the top grinding plate before returning the machine to normal production use. Main Specifications Manufacturer: Lapmaster International Model: DSG 720 Year: 2014 Machine Type: Double Side Fine Grinding Machine / Double-Sided Grinding Machine Grinding System Grinding Wheel Outside Diameter: Approx. 720mm Grinding Wheel Inside Diameter: Approx. 320mm Wheel Size: Ø720 x Ø320mm Number of Workpiece Carriers: 6 Upper Grinding Wheel Speed: 0–130 rpm Lower Grinding Wheel Speed: 0–130 rpm Inner Pin Ring Speed: 0–100 rpm The double-sided grinding arrangement allows both sides of suitable components to be processed simultaneously, helping achieve consistent component thickness and parallelism. Electrical Specifications Operating Voltage: AC 380V, 3 Phase Frequency: 50Hz Installed Power: Approx. 18kW Current: Approx. 50A Pneumatic Requirements Normal Air Supply: Approx. 5–6 kg/cm² / 0.5–0.6MPa Minimum Working Pressure: Approx. 4 kg/cm² / 0.4MPa Siemens SIMATIC Touchscreen Control: The machine is equipped with a Siemens SIMATIC touchscreen operator control. Coolant Filtration System Included: The Lapmaster DSG 720 is supplied with a separate coolant filtration system. Approximate Machine Dimensions Machine Width: Approx. 1,800mm Machine Depth: Approx. 1,500mm Machine Height: Approx. 2,550mm Net Machine Weight: Approx. 2,800kg Key Features 2014 machine Lapmaster International DSG 720 Double-sided fine grinding process Ø720mm outer-diameter grinding wheels Ø320mm grinding wheel inner diameter 6 workpiece carriers Upper wheel speed 0–130 rpm Lower wheel speed 0–130 rpm Inner pin ring speed 0–100 rpm Siemens SIMATIC touchscreen control Separate coolant filtration system Feed Tables Included 18kW installed power 380V, 3-phase, 50Hz Approx. 2,800kg machine weight Precision simultaneous grinding of both component faces Please Note: All specifications, dimensions, capacities and machine details quoted above are approximate and are provided for guidance only. Prospective purchasers should verify all important specifications, machine condition, tooling requirements and operating requirements prior to purchase.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 2.7552.069, wire diameter (max.): 6 mm, power of the servo motor: 10,000 W, input voltage: 400 V, type of input current: three-phase, We are offering this very well-maintained Wafios BM 3 wire bending machine, manufactured in 1998, for sale. Nwjdpfszvdd Aex Af Sol Tool set for 3 - 6 mm wire is included. Complete documentation is available. The PC has already been replaced. We mainly produced 3D parts from 3 mm wire – brochure holders in all variations. Everyone knows what happens when you maintain the speed after the third bend... distortion. Therefore, this machine operated at a maximum speed of 15%. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 800 kg, total height: 2,410 mm, total width: 2,110 mm, total length: 2,334 mm, table width: 400 mm, type of input current: three-phase, distance table to quill: 310,660 mm, table length: 700 mm, workpiece length (max.): 850 mm, workpiece width (max.): 850 mm, workpiece height (max.): 380 mm, input voltage: 415 V, overall weight: 2,500 kg, table load: 800 kg, input frequency: 50 Hz, tank capacity: 450 l, Equipment: documentation/manual, 2023 Excetek ED400C CNC Die Sink EDM Machine Used 2023 Excetek ED400C CNC Die Sink EDM Machine for Sale – C-Axis – EROWA 4-Station Automatic Tool Changer – Spinflo Oil Cooler – Magnetic Chuck – ViTiny Digital Microscope Manufacturer: Excetek Model: ED400C Machine Type: CNC Die Sink EDM / Sinker EDM / Spark Erosion Machine Year: 2023 Condition: Excellent Machine Description Modern 2023 Excetek ED400C CNC Die Sink EDM machine available for sale with an excellent specification and useful additional tooling and accessories. The Excetek ED400C is a compact CNC spark erosion / sinker EDM designed for accurate machining of complex cavities, moulds, dies, precision components and difficult-to-machine conductive materials. This machine is particularly well equipped and includes a C-axis, EROWA tooling, 4-station automatic EROWA tool changer, 600 x 200mm magnetic chuck, Spinflo ECEA oil cooler and ViTiny digital microscope with display screen. Main Machine Specification X-axis Travel: 400mm Njdez E A Hxopfx Af Sowl Y-axis Travel: 300mm Z-axis Travel: 350mm Worktable Size: 700 x 400mm Maximum Workpiece Size: 850 x 850 x 380mm Maximum Workpiece Weight: 800kg Maximum Electrode Weight: 120kg Electrode Head to Worktable Distance: 310–660mm Approx. Machine Dimensions: 2,334 x 2,110 x 2,410mm Machine Weight: Approx. 2,500kg Dielectric Oil Filtration System The ED400C is supplied with an integrated oil filtration arrangement. Oil filter tank capacity: Approx. 450 litres Paper filters: 3 A clean and stable dielectric oil system is important for maintaining consistent EDM performance, flushing efficiency and surface finish during spark erosion operations. Spinflo ECEA Oil Cooler The machine includes a Spinflo ECEA oil cooler / dielectric chiller. C-Axis The ED400C is equipped with a C-axis, allowing controlled rotary positioning of the electrode. EROWA 4-Station Automatic Tool Changer The machine is fitted with a 4-position automatic EROWA tool changer. This enables several electrodes to be loaded and automatically changed during a machining cycle, helping increase unattended machining capability and reducing operator intervention The machine also includes EROWA tooling, providing a recognised precision electrode holding and referencing system. 600 x 200mm Magnetic Chuck Included with the machine is a: 600 x 200mm magnetic chuck This provides an additional workholding option for suitable ferrous components and adds to the versatility of the machine for general precision EDM work. ViTiny Digital Microscope & Screen The machine also includes a ViTiny digital microscope with separate display screen. A digital microscope is particularly useful for close inspection of electrodes, fine features and machined surfaces and can assist with setup, inspection and process verification. Key Equipment Included Excetek ED400C CNC die-sink EDM C-axis EROWA tooling 4-station automatic EROWA tool changer Spinflo ECEA dielectric oil cooler 600 x 200mm magnetic chuck ViTiny digital microscope ViTiny display screen Integrated dielectric filtration system Approx. 450-litre oil tank 3 paper filters CNC control and EDM generator Please Note: All specifications, dimensions, capacities, accessories and machine details quoted above are approximate and are provided for guidance only.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1990, operating hours: 10,000 h, machine/vehicle number: 3936990, Equipment: all wheel drive, compressor, emergency stop, hydraulics, Complete MacFab Wet-Cast Concrete Panel Production Line and 29 steel moulds. Comprehensive Mould Package for the production of concrete sectional garages. Alternatively the moulds could be altered to produce products in a variety of sizes, shapes, textures and colours. Excellent / In Perfect Working order In daily operational use. Available for live operational viewings. Location: United Kingdom Terms: Ex Works (EXW) – Buyer to arrange decommissioning and transport. Overview, An exceptional opportunity to acquire a complete, turnkey precast concrete panel manufacturing setup from industry-leading manufacturer MacFab. This system is not sitting in storage; it is currently in day-to-day production, meticulously maintained, and performing to perfect operational standards. Ideal for an established precast yard looking to rapidly scale capacity, or an agricultural/civil contractor looking to bring high-volume panel manufacturing in-house without the long lead times of ordering new plant equipment. Fully operational hydraulic systems, premium vibration consolidation setup, and robust chassis engineering. Regularly serviced and completely reliable. 29 Heavy-Duty Steel Moulds Included: A massive inventory of robust commercial steel panel moulds engineered for high-cycle wet-cast production. Excellent face-side finish quality and squareness. Complete Turnkey Solution: Includes all necessary integrated controls and ancillaries to begin pouring immediately upon reassembly Zero Operational Risk: Buy with 100% confidence. Because the machine is in active use, buyers can verify hydraulic integrity, vibration consistency, and overall cycle efficiency first-hand. Massive Mould 29 commercial steel moulds independently represents substantial capital expense and manufacturing lead time. This package provides immediate scaling capability. Live Video / Inspections Available: Serious buyers are invited to visit the facility to see the machinery running in real-time. Nwodpezndccofx Af Sol PRICE £59950.00 Plus VAT 70270 Euros (Open to sensible offers for a swift transaction) Sold Ex Works (EXW).

Condition: excellent (used), Year of construction: 1988, For sale: Industrial vibratory finishing machine from the renowned brand SPALECK (Max Spaleck GmbH & Co. KG, Bocholt, West Germany) – model VAT-240. Robust unit manufactured in 1988, designed for professional finishing of components. Ideal applications include: • Surface polishing • Deburring after machining • Edge rounding • Cleaning and surface preparation prior to painting or electroplating Nedpfxew Ixw Ao Af Sswl Works with different types of media – ceramic, plastic, or steel – depending on the workpieces to be processed. Technical data: • Model: VAT-240 • Year of manufacture: 1988 • Maximum batch load: 500 kg • Power supply: 3-phase, 380 V, 50 Hz • Control voltage: 220 V • Rated current: 20 A • Protection: 25 A • Total power: 18.1 kW • Serial number: 63712 • Included: control cabinet with START/STOP buttons, emergency stop switch, and ammeter The machine is complete, in good technical condition, and ready for operation upon connection. Heavy-duty construction, discharge chute with rubber cover, and convenient media change system. SPALECK is a German brand known for manufacturing reliable vibratory finishing machines, highly regarded by industrial plants worldwide.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 001, We offer for sale a custom-built automatic cutting machine AMT Plus PVA, designed for high-volume production of short wooden components from pre-machined timber profiles and square sections. The machine automatically feeds, positions, clamps and cuts workpieces according to preset dimensions, ensuring high productivity and repeatability. Technical Specifications Manufacturer: AMT Plus s.r.o. Model: PVA Year of manufacture: 2018 Workpiece dimensions: Min.: 12 × 40 × 300 mm Max.: 70 × 160 × 800 mm Installed power: 40 kVA Power supply: 400 V / 50 Hz Air pressure: 0.6 MPa Air consumption: approx. 4.5 m³/h Features Servo-controlled positioning system Frequency-controlled saw drive Pneumatic clamping Multi-blade cutting unit Integrated waste conveyor Fully enclosed safety guarding with dust extraction connections Dimensions Approx. 3500 × 1320 × 2140 mm Condition Fully functional Good technical condition Available for inspection and testing Applications Ideal for the production of: furniture components hardwood blocks flooring elements window and door components other precision-cut wooden parts Nodpfx Afozyrdlo Sewl Sale Terms Available immediately Dismantling and transport to be arranged by the buyer Custom-built machine originally developed for accurate cutting of short wooden components in serial production.

Condition: used, Year of construction: 2011, operating hours: 1,878 h, machine/vehicle number: TP124, Used Tetra Pak AB straw applicator 2011Technical Specifications & Performance DataThe Straw Applicator 30 is a dedicated packaging machine engineered to apply individual drinking straws onto carton packages with high accuracy and repeatability. Manufactured by Tetra Pak Packaging Solutions AB, this second hand unit is well suited for integration within beverage production and industrial packaging lines focused on carton handling. With low operating hours and CE compliance, it offers dependable performance for producers seeking to upgrade or expand a used bottling line or carton packaging operation.Manufacturer: Tetra Pak Packaging Solutions ABMachine type: Straw Applicator 30Model: 30Year of manufacture: 2011Production speed: up to 16,400 packs per hour (dependent on pack format and line speed)Container compatibility: Carton packagesSupported format: Tetra Classic Aseptic (tetrahedral)Primary function: Automated application of individual straws to preformed, filled, and wrapped cartonsOperating hours (hour meter): 1,878.6 hDrawing specification: 86335D-300CE marking: YesAdvanced Automation & Control SystemsThis machine employs a robust, PLC-based architecture with an HMI operator panel for recipe management, real-time status visualization, and streamlined diagnostics. Integrated sensors monitor straw presence and placement, while alarms and fault messages support rapid troubleshooting and reduced downtime. Quick-change parts enable efficient format adjustments, enhancing flexibility on mixed-format packaging lines.PLC-based control with HMI for set-up, recipes, and monitoringIntegrated sensors for straw presence and placement verificationAlarm and diagnostic functions for rapid fault resolutionQuick-change components for format changeoversCE-compliant guarding and interlocksProduction Line Integration CapabilitiesDesigned for inline operation, the Straw Applicator 30 synchronizes with upstream carton fillers and conveyors, as well as downstream bundling or case packing systems. Its control interfaces facilitate signal exchange for smooth product flow and coordinated speed control across the industrial packaging line.Inline integration with carton fillers and conveyor systemsInterface-ready for upstream/downstream signal exchangeFormat change flexibility for multiple carton sizes and straw typesSuitable for beverage production environments focused on carton packagingMachine Condition & Maintenance HistoryThis second hand unit presents as a low-hour machine with a clear operational profile. The hour meter indicates limited use, supporting extended service potential. Maintenance should follow OEM guidelines to sustain reliability and performance in continuous-duty applications common to beverage and industrial packaging operations.Operational status: Ready for operationLow operating hou... Nwjdpez E Dk Ssfx Af Ssl

Condition: used, Year of construction: 2009, operating hours: 67,500 h, functionality: fully functional, machine/vehicle number: 2.7681.023, For sale: WAFIOS BMZ 42 CNC tube bending machine, year 2009. We are offering a CNC tube bending machine from the premium manufacturer WAFIOS, model BMZ 42. The machine has been used in production and is suitable for the precise, serial production of bent wire and tube components. Technical data: manufacturer WAFIOS, type BMZ 42, year of construction 2009, serial number 2.7681.023, operating hours approximately 67,500 h, location: Northern Italy, province of Bolzano. The machine has a robust construction and is currently still in operation and used for complex tube applications in the automotive industry. The machine is sold complete with protective casing. Used condition, machine in production, further details on condition and accessories available upon request. Machine supplied as inspected, including available documentation. Inspection possible by appointment, loading assistance provided. If interested, please contact us. Price negotiable. Nedpfozb U Tgjx Af Sowl

Condition: used, Year of construction: 2013, machine/vehicle number: ET255, Used FUJI 410 sleeve applicator labeling machine for PET 10000 BPHTechnical Specifications & Performance DataThe Fuji Seal 410 DT-STH-DHA is an automatic linear sleeve labeling machine designed for the application of sleeve labels to PET bottles. Built in 2013, this high-performance unit reaches a maximum output of 10,000 bottles per hour, supporting efficient label application in industrial packaging and beverage production environments.Manufacturer: Fuji SealModel: 410 DT-STH-DHAYear of construction: 2013Maximum speed: 10,000 bottles per hourMachine configuration: LinearContainer material: PETCurrent bottle format: 2.0LLabeling method: Sleeve applicationMaximum reel diameter: Ø 500 mmWorking table height: 1200 mmAdvanced Automation & Control SystemsThe machine is equipped with a Siemens PLC for controlled and simplified operation. Its six-reel configuration and automatic reel changeover are designed to support continuity during production, reducing interruptions associated with reel replacement. Clockwise operating direction is specified for integration planning and conveyor layout.Siemens PLC control system6 label reelsAutomatic reel changeoverElectrical supply: 400V, 3 Ph+N+TElectrical rating: 16ACompressed-air pressure: 6 barProduction Line Integration CapabilitiesThis sleeve labeling machine can be positioned downstream of filling and capping equipment and upstream of secondary packaging machinery in a used bottling line. Its linear architecture is suitable for inline PET bottle handling and can be coordinated with conveyors, accumulation systems, inspection equipment, shrink wrappers, and palletizing equipment. The stated 2.0L format provides a defined basis for assessing bottle-handling components and change-part requirements.Automatic sleeve labeling is applicable to beverage production lines processing soft drinks, still water, sparkling water, milk, beer, wine, alcoholic beverages, oil, and preserved products. As with other industrial packaging machines, line synchronization should consider bottle stability, conveyor speeds, sleeve material, and downstream package requirements.Machine Condition & Maintenance HistoryThe machine is stated as ready for use, refurbished, and supplied with compatible spare parts. A 6-month warranty is indicated. This condition makes the unit suitable for operators seeking second hand bottling equipment intended for prompt integration into a production line. The machine is offered under an as-inspected sale condition.Operational Performance & VersatilityThe Fuji Seal sleeve labeling system is intended for accurate automatic application of sleeve labels on PET bottles. Sleeve labeling provides a versatile decoration solution for beverage production and industrial packaging, allowing bottle presentation to be adapted to product and brand requirements. The label magazine, six reel positions, and automatic changeover arrange... Njdpfxsz E Dg Hs Af Sowl

Condition: used, Year of construction: 2013, machine/vehicle number: DEPAL44, Used SIDEL seep-off depalletizer - Year 2013Technical Specifications & Performance DataThis Sidel Sweep-Off automatic depalletizer is designed to unload bottles and jars from palletized layers and transfer them efficiently to the downstream production line. Built in 2013, it is suitable for industrial packaging operations requiring reliable container handling at the start of a used bottling line.Manufacturer: SidelModel: Sweep-OffProduction capacity: up to 200 layers/hourProcessable pallet format: 1000 x 1200 mmContainer materials: Glass and AluminumHandled containers: Bottles and jarsInstalled power: 17.7 kWElectrical supply: 400 V, 3-phase + protective earth, 50 HzFull-load current: 32 AOperating pressure: 6 barAdvanced Automation & Control SystemsThe machine operates automatically through a Siemens S7-300 PLC and a B&R Panel PC 800 operator interface. This control architecture provides operators with an intuitive interface for managing depalletizing cycles, pallet handling and line transfer operations. Automated control supports consistent layer discharge and coordinated operation with connected bottling equipment.Production Line Integration CapabilitiesThe Sweep-Off depalletizer is positioned at the infeed of a bottling or industrial packaging line, where it transfers containers from 1000 x 1200 mm pallets to conveyor systems feeding downstream process equipment. It can be integrated with rinsing, filling, capping, labeling and secondary packaging machinery. Its handling capability for glass bottles, aluminum cans and jars makes it suitable for flexible beverage production and packaged food applications.For a second hand production line, the depalletizer provides an important automated material-handling function by reducing manual pallet unloading and maintaining a controlled flow of empty containers toward the line.Machine Condition & Maintenance HistoryThe machine is ready for operation and has been overhauled. Compatible spare parts are available, and the machine is supplied with a 6-month warranty. Its stated ready-to-use condition makes it suitable for buyers seeking a used bottling line component that can be integrated into an existing industrial packaging installation.Operational Performance & VersatilityThis automatic depalletizer is intended for bottles and jars used in preserves, still water, sparkling water, soft drinks, milk, oil, beer, wine and spirits production. The Sweep-Off handling concept supports orderly transfer from pallet layers to the production line, helping maintain a continuous container supply to downstream bottling equipment. Its compatibility with glass and aluminum containers broadens its use across beverage production and food packaging environments.Installation Requirements & Site PreparationInstallation planning should allow for pallet loading and unloading access, the 1000 x 1200 mm pallet footprint, and connection to infeed and discharge conveyors. The electrical installation requires a 400 V, 3-phase + protective e... Njdpfx Afsz E Dgmj Sowl

Condition: used, Year of construction: 2010, machine/vehicle number: ET179, Used Sacmi Labeling Machine Opera year 2010 overhauled in 2025 Model: Opera 400 (2010) • Speed: 45,000 Bottles/hour • Status: ready for operation • Formats: 500 ml, 1 L, 1.5 L. Reconditioned OPP roll-fed labeler, overhauled in 2025. This overhauled labeling machine delivers stable high-speed performance for multi-format lines and qualifies as robust bottle labeling equipment for continuous production. Performance and Specifications: The Opera 400 maintains consistent output at 45,000 BPH with quick format changes across 500 ml, 1 L, 1.5 L. Two labeling stations support continuous operation, with automatic label adjustments and manual head adjustment to keep tolerances steady at speed. This is a reconditioned OPP labeling machine. Work performed during the 2025 overhaul: The jacks The plates The glue roller were overhauled The roller motor was replaced New safety guards were installed The printheads were overhauled Nodez E Dl Aspfx Af Sewl All glue heating unit probes were replaced The suction unit hoses were replaced, and the entire electrical system was inspected Components and Functionality: Equipped with 25 plates, the Opera 400 uses a mechanical cam brake/clutch for plate movement to maintain precise synchronization at full speed. The label feed is roll-fed (coil). With 2 labeling stations, the machine supports continuous application while minimizing downtime. No. of plates25 Rotation direction0 Plate movement1 (mechanical cam brake/clutch) Number of stations2 Labeling method7 Label placement5 Optical centering system0 Head adjustment1 (manual) Optimization and Maintenance of Used Sacmi Labeling Machine: Manual head adjustment gives technicians direct control for fine-tuning, while automatic label adjustments reduce operator intervention during run. The 2025 refurbishment addressed wear parts and safety elements, supporting reliable uptime typical of bottle labeling equipment in high-throughput environments. Conclusion: Sacmi Opera 400 (2010), overhauled in 2025, combines 45,000 BPH throughput, roll-fed OPP application, 25 plates, and 2 stations with multi-format capability (500 ml, 1 L, 1.5 L). Ready for operation.

Condition: used, Year of construction: 2014, machine/vehicle number: LC675, Used CSAK brewing canning line 2500 cans-hourTechnical Specifications & Performance DataThis complete canning line is a used, fully reconditioned industrial packaging system designed for beer production in standard 330 ml cans. Built around an atmospheric filling process, the line provides a coordinated solution for empty-can handling, filling, labeling and date or lot coding.Production capacity: 2500 cans/hCan format: 0.33L standard cansFilling method: Atmospheric filling, not counter-pressure fillingFiller manufacturer: Cask Brewing SystemsYear: 2014Advanced Automation & Control SystemsThe line includes guarded conveyor-based equipment with integrated operator controls. Visible features include touchscreen control interfaces, status-light towers, pushbutton controls and emergency-stop devices. Pneumatic lines, valves and adjustable conveyor guide components support controlled handling through the packaging process.Production Line Integration CapabilitiesThis complete canning line combines essential process stages for beer canning, from depalletizing empty cans through atmospheric filling, labeling and coding. It can be integrated with upstream beer-processing equipment and downstream secondary packaging machinery through suitable conveying and line-control arrangements.Machine typeManufacturer / modelYearDepalletizerCan depalletizer/elevatorFilling MonoblockCask Brewing Systems atmospheric filler2014Labeling MachineS2S Labelling Machines S2/ZPrinterLinx inkjet coderThe 0.33L can format makes this equipment suitable for producers requiring a compact beverage production solution for standard beer cans. The modular arrangement also supports practical connection to can conveyors, accumulation sections and downstream industrial packaging operations.Machine Condition & Maintenance HistoryThe line is used and fully reconditioned, providing a prepared second hand canning solution for operation. Its reconditioned condition is particularly relevant for buyers seeking established beverage production equipment with the core filling, labeling and coding functions supplied as one line.Operational Performance & VersatilityThe atmospheric filler is intended for beer in cans and is specifically identified as a non-counter-pressure filling system. The line incorporates an empty-can depalletizer/elevator, a Cask Brewing Systems filler, a Linx inkjet coder and an S2S Labelling... Njdpfxez E Dhko Af Sswl

Condition: used, Year of construction: 2016, machine/vehicle number: PST34, Used BUCHER tube-in-tube flash pasteurizer 12000 L/hTechnical Specifications & Performance DataThis tube-in-tube flash pasteurizer delivers reliable thermal treatment for high-quality beverage production. Manufactured by Bucher Unipektin, model PWAP 12000-S, the unit is designed for continuous, hygienic operation with minimal product degradation. Its robust stainless steel construction and compact skid-mounted layout simplify installation and integration into existing processing or used bottling line environments.Manufacturer: Bucher UnipektinModel: PWAP 12000-SMachine type: Tube-in-tube flash pasteurizerYear: 2016Capacity: 10,000–12,000 l/hHeat exchanger: Tube-in-tube designConstruction: Stainless steel, skid-mounted frameControl: Touchscreen HMI control panelIncluded components: Product feed pump, holding tubeSanitation: CIP-ready configurationPrevious product history: Apple juice / concentrate (non-dairy)Documentation: Full documentation and user manual includedAdvanced Automation & Control SystemsThe integrated touchscreen HMI provides intuitive operation, real-time process visualization, and streamlined recipe management for consistent pasteurization results. Automated control of temperature, product flow, and holding time supports stable performance and product safety. Alarm handling, trend logging, and guided operator prompts help ensure repeatable processes with minimal downtime. The system’s CIP-ready design allows automated cleaning sequences to be managed from the control interface for efficient changeovers and hygiene assurance.Production Line Integration CapabilitiesEngineered for seamless integration in beverage production environments, this flash pasteurizer connects upstream to blending, filtration, and storage tanks, and downstream to fillers and industrial packaging systems. The skid-mounted footprint simplifies placement and utilities hook-up, enabling fast commissioning within second hand or upgraded processing setups. Its continuous operation supports steady flows into downstream filling and labeling equipment, helping maintain overall line efficiency.Machine Condition & Maintenance HistoryThe unit has a documented non-dairy product history processing apple juice and concentrate, contributing to a clean internal condition profile. Supplied with full documentation and user manual to facilitate installation, operation, and maintenance. Presented as a second hand pasteurization system suitable for beverage production environments seeking dependable thermal treatment with compact installation.Operational Performance & VersatilityThe tube-in-tube configuration is well-suited for juices, concentrates, and similar non-dairy beverages where gentle handling and stable heat transfer are critical. The design supports rapid heat-up and controlled holding for effective microbial inactivation while preserving product quality attributes. The CIP-ready construction, sanitary connections, and stainless steel surfaces... Nwedpfoz E Dhqox Af Ssl

Condition: used, Year of construction: 2000, machine/vehicle number: M309, Used filling monoblock Bertolaso Syncronia 16-16/1-840Technical Specifications & Performance DataThe Bertolaso Filling Monoblock Syncronia 16-16-1-840 is a second hand bottling monoblock designed for high-quality beverage production on glass bottles. This used bottling line component integrates rinsing, filling, and corking in a compact rotary platform engineered for reliable industrial packaging performance. Manufactured by Bertolaso, the machine features an inert gas management concept for both bottle conditioning and closure, making it an excellent choice for premium products requiring oxygen reduction.Manufacturer: BertolasoModel: Syncronia 16-16-1-840Year: 2000Container type: Glass bottlesRinser: 16 grippers with penetrating nozzle and double inert gas treatmentFiller type: Gravity/light depression with nitrogen supportCorker: Single-head straight corking with inert gas and vacuum corkingFormats: Compatible with 0.375L and 0.75L bottle formatsElectrical: 400 V, 50 HzCIP readiness: Integrated CIP with stainless steel dummy bottlesModel code & configuration: Syncronia 16-16-1-840Advanced Automation & Control SystemsThe monoblock includes process features aimed at consistent quality and reduced oxygen pickup. The rinser employs double inert gas treatment to pre-condition the bottles. The filler operates in light vacuum/gravity mode with nitrogen, complemented by level control at the valve. A sensor detects hanging bottles at the outfeed to protect product flow and minimize stoppages. Integrated CIP and stainless steel dummy bottles enable efficient cleaning-in-place procedures across rinsing and filling turrets, supporting hygienic operation in beverage production.Production Line Integration CapabilitiesDesigned for industrial packaging environments, this monoblock can operate as a standalone unit or be integrated into a complete used bottling line. It is optimized for glass bottle handling and can interface with upstream conveyors and downstream inspection or labeling systems. Format flexibility includes 0.375L and 0.75L sizes, and quick changeover is supported by the turret design and format parts.Machine Condition & Maintenance HistoryThe machine is in excellent overall condition and has processed approximately 1,000,000 bottles over its lifetime. Its condition and integrated CIP system suggest careful operation and maintenance, making it suitable for facilities seeking ready-for-operation bottling equipment with proven reliability.Operational Performance & VersatilityThis monoblock is particularly suited to oxygen-sensitive products handled in glass bottles. The double inert gas rinsing, nitrogen-assisted filling under light depression, and vacuum corking with inert gas injection collectively provide robust oxygen management. The machine’s engineering by Bertolaso is recognized for precision filling, gentle handling, and closure integrity with straight corks. Additional safeguards include outfeed sensors for bottle position control and level r... Nwsdjz E Dlpepfx Af Sol

Year of construction: 2025, condition: new, functionality: fully functional, the Seamark XC1000 X-Ray Component Counter: Smarter, Faster, and Fully Automated At Active-PCB Solutions, we know that accuracy, efficiency, and seamless integration are not optional, they’re an essential part of our manufacturing process. That’s why we’re excited to introduce our new Seamark XC1000 X-Ray Component Counter which has just been installed on our shop floor by Advanced Manufacturing Solutions Ltd. The next-generation offline X-ray component counting system is designed to redefine how we manage and verify our SMD component inventory. You can find out more about this new technology and how we intend to put it to full use below! Introducing the Seamark XC1000 X-Ray Component Counter Precision Counting Powered by AI Leveraging an advanced AI algorithm, this intelligent Seamark XC1000 X-Ray Component Counter system provides 99.99% counting accuracy for all SMD components sized 01005 and above, meaning we can say goodbye to manual errors and time-consuming reel unpacking. The XC1000 counts 1 to 4 reels simultaneously with no unspooling, no guesswork, and no downtime. Ergonomic Design Meets Automation The XC1000 features an ergonomically designed workstation where the operator can sit comfortably and monitor the easy-to-read counter screen. With an automated stage movement system and anti-pinch safety design, reel handling is simple, safe, and efficient. The unit is compact and mobile, thanks to built-in wheels for easy relocation. Smart Labeling and Real-Time Integration Mislabeling and manual input errors are inevitable and costly. However, with its error-proof labeling function, the XC1000 automatically detects and recognises each reel, instantly printing the correct label via a TSC industrial printer. This intelligent workflow is further enhanced by seamless real-time integration with MES, ERP, and WMS systems, enabling live data exchange and automatic result uploads. Built for the Modern SMT World The XC1000 is built to handle the full range of reel sizes (7”–15”), heights (5–80mm), and component types, including moisture-proof bag packaging, bulk materials, and JEDEC trays. Its amorphous silicon flat panel detector delivers sharp, high-resolution images with a 430mm × 430mm field of view, supported by four optional cameras for automatic barcode reading. Industry-Leading Database & Cloud Intelligence What sets the Seamark XC1000 X-Ray Component Counter apart is its dynamic, global X-ray component database, which includes: 15,000+ material profiles 60 million+ testing images 700,000+ core reference images Weekly updates with 160,000 new images Over 8.6 million classification training images This continually evolving database ensures compatibility with 99.2% of global components. Updates are cloud-synced monthly, keeping the whole system current and reliable. Key Technical Specs at a Glance Input Power: 220V, 10A, 50–60Hz Njdpfx Afsyzpkzs Sowl Control System: Windows 10 64-bit X-Ray Source: Sealed microfocus (30–80KV, up to 1000 μA) Detector: 3072×3072 matrix, 139μm resolution Max Output Power: 56W Counting Speed: Fully automated, operator training not required.

Condition: used, Year of construction: 2002, machine/vehicle number: M353, Used Linker 36-36-12 filling monoblockTechnical Specifications & Performance DataThe Linker 36-36-12 filling and capping monoblock is an industrial packaging machine designed for volumetric filling and plastic screw-cap application. Manufactured in 2002, this unit combines filling and capping functions in one compact bottling equipment platform for efficient beverage production and low-viscosity liquid handling.Production speed: 140 units/min based on 500 cc presentations (8.400 units/hour based on 500ml) Filling valves: 36Capping heads: 12Compatible formats: 0.25L to 1.0L, with format changeovers for additional presentationsContainer handling: PET, PP and HDPE containers with plastic capsDimensions: 6000 mm length, 6000 mm width and 3600 mm heightWeight: 3500 kgAdvanced Automation & Control SystemsThe monoblock is equipped with an Allen-Bradley MicroLogix 1500 PLC and an Allen-Bradley PanelView Plus 600 HMI. Control panels, instrumentation and operator-interface components support coordinated operation of the filling and capping stations. Fixed filling nozzles and a volumetric precision filling system provide a consistent process arrangement for the configured product range.The electrical supply requirement is 460 V AC, 3-phase, at 60 Hz, with stated power consumption of 6.4 kVA.Production Line Integration CapabilitiesThis Filling and Capping Monoblock can operate as the core process machine within a used bottling line, positioned after container supply and rinsing operations and before downstream labeling, inspection and secondary packaging machinery. It includes a PACE 5286 bottle feeder/organizer to support orderly container infeed.Its format range and changeover capability make the machine suitable for production environments handling multiple 0.25L to 1.0L container presentations. Compatibility with CIP cleaning systems supports integration into industrial packaging installations where hygienic product-contact cleaning procedures are required.Machine Condition & Maintenance HistoryThe machine is in production. Manuals, maintenance documentation and P&ID documentation are available, supporting technical review, installation planning and ongoing maintenance activities. The machine is configured as a second hand filling monoblock with documented controls, instrumentation and operating equipment.Operational Performance & VersatilityThe Linker monoblock is configured for edible vegetable oil and is also compatible with water, juice, CSD, vinegar and other low-viscosity liquid products. Its 36-valve volumetric filler uses fixed nozzles, while the integrated 12-head capper applies 28 mm plastic screw caps.The machine has aseptic capability and is designed for PET, PP and HDPE container handling. This flexibility supports beverage production and food-liquid packaging applications requiring filling and closure operations in a single machine platform.Installation Requirements & Site PreparationInstallation planning should allow for the machine footprint of 6000 mm by 6000 mm and an overall height of 3600 mm, as well as access space for operat... Nedpfxez E Dggo Af Sjwl

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, wire diameter (max.): 10 mm, The BLM GROUP E-FLEX is a fully automatic, all-electric, single-head CNC wire-bending machine designed to produce complex 3D wire parts directly from a coil. Key Capabilities Full Automation: It processes wire directly from a spool, seamlessly performing inline operations like straightening, cutting, chamfering, and bending.Dual-Direction Bending: The bending head features a double turret capable of rotating both clockwise and counter-clockwise. This layout allows it to use multiple bending technologies simultaneously to avoid impossible geometries. Continuous Operation: Engineered with a small physical footprint and all-electric axes, it is optimized for non-stop, 24/7 industrial manufacturing. Technical Specifications The system is built to handle heavy production environments with the following configurations: Parameter Specification Bending CapacityUp to Ø 8 mm (with Wire R=900 N/mm²) or Ø 10 mm (with Wire R=500 N/mm²)Control System5 CNC axes Bending Angle0.1° to 240°Bending Radius 0.5 mm to Infinite Coiler Capacity Up to 1,500 kg Power Consumption22 kW maximum installed power (8 kW average drawn power)Machine Nwjdpfxozu Auwe Af Sel Weight2,400 kg (5,291 lbs)

Condition: used, functionality: fully functional, fuel type: diesel, color: blue, Year of construction: 2005, Advertisement for a rebar bending machine for culverts and pipes. Njdpey Uffnsfx Af Sewl In good condition (fully functional). €50,000

Condition: used, Year of construction: 2002, machine/vehicle number: CA83, Used ROBINO & GALANDRINO monostadio z 8 t capsuling machine- Year 2002Technical Specifications & Performance DataThis Single-stage Capsuling Machine Z 8 T by Robino & Galandrino is a robust solution for capsule application on glass bottles, engineered for wine and sparkling wine producers seeking reliable performance in a second hand, used bottling line environment. Built with Italian precision, it offers consistent capsuling quality and seamless integration into industrial packaging and beverage production workflows.Manufacturer: Robino & GalandrinoModel: Z 8 T (Monostadio)Year: 2002Configuration: Single-stage capsulingNo. of heads: 8Capsule types: PVC shrinkable plastic; Champagne/sparkling wineRotation direction: CounterclockwiseOptical centering: Not equippedContainers: Glass bottlesCompliance: CE markedAdvanced Automation & Control SystemsDesigned for dependable operation within professional bottling equipment setups, this capsuling machine supports stable, repeatable processes. Its single-stage architecture simplifies adjustments and minimizes changeover time. Operator functions are straightforward, ensuring efficient routine operations. Standard machine protections and CE conformity support safe use on modern production floors.Streamlined controls for routine start/stop and adjustmentsQuick changeovers aligned with single-stage designMechanical alignment without optical centering for robust, low-maintenance operationSafety guarding consistent with CE conformityProduction Line Integration CapabilitiesThe Z 8 T integrates easily as a standalone station or inline within a complete used bottling line. It accepts upstream glass bottle handling and passes consistently capped bottles downstream to labeling or inspection modules, supporting flexible industrial packaging layouts.Inline or standalone operationCompatible with standard glass wine bottle handling conveyorsSuitable for integration after corking/capping and before labelingCapsule application for both PVC shrink and sparkling wine formatsMachine Condition & Maintenance HistoryThis machine is currently in storage, making it available for rapid deployment into beverage production environments after routine commissioning. The overall configuration, CE conformity, and preserved components provide a solid foundation for reliable second hand operation.Current status: In storageCE marked unitSingle-stage, 8-head layout preservedOperational Performance & VersatilityOptimized for wine sector applications, the Z 8 T manages both PVC shrink capsules and champagne/sparkling wine formats. Its counterclockwise carousel and 8-head configuration deliver balanced throughput for small to mid-scale wineries and beverage producers.Ideal for Wine and sparkling wine productionConsistent application of PVC sh... Nwedpfx Afsz E Dhwo Sjl

Condition: used, Year of construction: 2007, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 415 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, We offer this used WEEKE OPTIMAT BHX 500 throughfeed machining center, year of construction 2007. The Homag Weeke Optimat BHX 500 is a compact CNC Horizontal drilling centre designed for high-precision processing of furniture panels, cabinet parts, and joinery components. Its horizontal machining design allows efficient processing with minimal floor space while maintaining high production speed and accuracy. _____ Key Features • Horizontal CNC drilling centre for efficient panel processing • Large processing capability • High-speed axis movement for fast production cycles • Integrated clamping system for precise panel positioning • Designed for drilling, routing, and grooving operations • Built by HOMAG / Weeke, a leading manufacturer of CNC woodworking machinery _____ Axis Speeds • X axis speed: up to 138 m/min Njdpfxoyr Utno Af Sjwl • Y axis speed: up to 80 m/min • Z axis speed: up to 50 m/min • Pressure plate axis: 27 m/min _____ Workpiece Dimensions • Length: Min 300 max 2500mm • Width: Min 100 max 1000mm • Thickness: Min 4 max 80mm _____ Machine Dimensions • Length: approx. 6500 mm • Width: approx. 2300 mm • Height: approx. 2700 mm _____ Electrical Requirements • Operating voltage: 3 × 415 V ±5% • Frequency: 50 Hz • Total connected load: approx. 19.5 kW • Recommended fuse protection: 50 A _____ Pneumatic Requirements • Compressed air pressure: minimum 7 bar • Air consumption: approx. 2500 NL/min _____ Dust Extraction • Dust extraction connection: 2 × 280 mm ports • Airflow requirement: minimum 4450 m³/h • Vacuum pressure: approx. 3000 Pa _____ If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2019, functionality: fully functional, Two-component, solvent-free dispensing system for food products Output: 2.5 kg per minute 2 dispensing pumps for drums This dispensing mixer was developed for two-component, solvent-free adhesives and features a preheating function to improve adhesive flow and stability during operation. Nwedpfx Afszwgb To Sol

Condition: used, Year of construction: 2009, machine/vehicle number: CA82, Used ROBINO & GALANDRINO capsuling machine - Year 2009Technical Specifications & Performance DataThis automatic capsuling monoblock is engineered for precision capsule application on bottles within a professional bottling environment. Manufactured by Robino & Galandrino, the SUPERBLOC series is renowned for robust construction, reliable operation, and high-quality finishes on glass bottles used in beverage production. The model identified is SUPERBLOC M 4 T, built in 2009 and CE marked for compliance with European safety and machinery directives. This second hand machine is suitable for integration in a used bottling line, supporting industrial packaging requirements for beverage producers.Manufacturer: Robino & GalandrinoModel designation: SUPERBLOC M 4 TYear of manufacture: 2009Machine type: Automatic capsuling monoblock (rotary platform)Container compatibility: Glass bottles (cylindrical and common wine-style profiles)Marking: CEApplication: Industrial beverage packaging and bottlingAdvanced Automation & Control SystemsDesigned for consistent capsule application with minimal operator intervention, this monoblock typically features synchronized drives and an integrated control panel for recipe management and format changes. Safety interlocks and guarding protect operators, while emergency stop circuits meet CE standards. The automation concept supports precise capsule positioning and repeatable performance across production runs.Integrated control panel with machine diagnosticsAutomatic magazine feed and capsule distribution (depending on configuration)Quick adjustment for bottle height and capsule lengthCE-compliant safety circuits and guardsProduction Line Integration CapabilitiesThe SUPERBLOC M 4 T is designed to operate inline with upstream and downstream bottling equipment. It couples efficiently with fillers, corkers, wirehooders, and labelers via standard conveyors. Format changeovers accommodate common glass bottle sizes used in beverage production, enabling flexible operation within mixed-format lines.Inline or standalone operation with synchronized conveyorsCompatible with upstream corking/capping and downstream labelingFormat change components for multiple bottle diameters and heightsMachine Condition & Maintenance HistoryManufactured in 2009 and CE marked, this second hand capsuling monoblock reflects the durable engineering of Robino & Galandrino equipment. The SUPERBLOC platform is known for accessible maintenance points, rugged mechanical assemblies, and availability of wear parts, supporting long-term reliability in beverage production environments.Operational Performance & VersatilityThis capsuling monoblock is suitable for a variety of capsule materials commonly used in beverage packaging. Depending on the installed heads and accessories, it can process PVC shrink capsules, polylaminate aluminum capsules, and specialized capsules for sparkling programs. The rotary layout ensures consistent application and alignment, del... Nodpfx Afsz E Di Is Sowl

Condition: excellent (used), For sale: a functional, tested set of two Rexroth hydraulic pumps. The pumps are combined into a single unit and equipped with control elements and Rexroth valves. The unit shows signs of use, as visible in the photos. The sale includes the complete unit shown in the photographs. Markings read from the nameplates: Component Designation / Number Rexroth pumps SY2DFE1-11/071-071/... +00908620 Pump material number 00908632 Part number on the nameplates 21559404 01 Nsdpfxsz Ezvxo Af Sowl Serial number of the first pump 1714777 Serial number of the second pump 1766280 Year of manufacture on the pump nameplates A038 Rexroth valves STW 0063-14/24V Valve material number 00905187 Additional number on the valves 21539727 01 Designation on the valves A035