Used Dürr Prüfstation for sale (19)

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps Hfjdpfjz Ai Tpex Ag Een SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: used, Year of construction: 2004, functionality: fully functional, DÜRR Aqueous Cleaning System with large baskets – available in single or double basket configurations. System is available ex location; a large quantity of spare parts is included in the delivery. Price on request Our Plant and Machinery Service: High availability – maximum productivity! Downtime costs time and money – that's why we ensure your machines and systems run reliably and efficiently. Our experienced team of qualified service technicians supports you with expertise, commitment, and complete service from a single source. Our Service Promise: We keep your systems in optimal condition – from mechanics and electronics to refrigeration technology. Whether maintenance, repair, or optimization: We ensure smooth operations. Overview of our services: 🔧 Electrical / Electronic Service • Professional troubleshooting and repairs • Modifications, upgrades, and modernization of controls (all common manufacturers) • Optimization of existing systems • Spare parts service for fast recommissioning ⚙️ Mechanical Service • Fast crash repairs and expert restoration • Regular maintenance and servicing of your equipment • Modifications, adjustments, and expansions • Installation and commissioning of new machines • Refrigeration plant inspections according to §6 Section 1 of the Chemicals Climate Protection Ordinance We carry out almost all mechanical and electronic work precisely, reliably, and on schedule. _____ Hfjdpfx Agex Emy Uo Een Why we are the right partner for you: ✅ Everything from one source – mechanics, electrics, refrigeration ✅ Experienced technicians with extensive expertise ✅ Fast response times and flexible solutions ✅ High system availability through preventive maintenance

Condition: used, DÜRR Hfodpfx Aoz Nflyog Een DÜRR testing station for adhesive applicators DÜRR testing station for adhesive applicators, including (5 robot-controlled adhesive applicators) DÜRR testing station (DÜRR in-house design) for the automotive industry Weight: 1200 kg Type: DÜRR testing station for adhesive applicators Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data; information provided is without guarantee!) We will gladly answer any further questions you may have over the phone.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) Hsdez Ebwpepfx Ag Eefn ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Technical machine description: Condition of the system: The drum pump, feed hoses, dispensing unit, etc., are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure: Max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters Hfodpfxszgckco Ag Ejn 1 adhesive control unit DÜRR (110017040) 1 single drum pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Year of construction: 2003, condition: ready for operation (used), This machine tool was manufactured in 2003. The Dürr Universal 71C features a comprehensive setup including a work tank, flood tank, continuous distillation, and an automatic sliding door. It also boasts a vacuum unit for drying, a condensate tank, and a drying cooler. Optional equipment like a control panel and ultrasound enhances its versatility. A great opportunity to buy this Dürr Universal 71C machine tool. For more information about this machine tool, please reach out to us. Additional equipment • Scaffolding with cladding • Work tank // Flood tank 1 // Condensate tank // Flood tank 2 • Continuous distillation • Automatic sliding door • Water separator • Bogie without cover • Storage with drive • Drying cooler • Vacuum unit - drying process // Vacuum unit // Vacuum filling/emptying device • HD - IFW Circulation filtration including chip rinsing • 6 baskets included Machine Benefits Technical Machine Benefits Hfedszzn Hxepfx Ag Een • Control panel • Ultrasound (1 rod transducer) • Heating fb2 • Hgz 028 cooling unit • Reinforced cooling (hgz 064 cooling unit and cooling coils in fb1, fb2, desti. ) • Filling/emptying device for fb2 • Dummy for fb2 • Preservation equipment • Single filter for fb1 // filtration for fb2 • Automatic feeding Extra Information Machine still under power

Year of construction: 2004, condition: ready for operation (used), Cycle time: approx. 31s, machine dimensions X/Y/Z: approx. 2200mm/2400mm/2300mm, weight: approx. 1500kg, control: Siemens. An on-site inspection is possible. Hfodjxwcvgjpfx Ag Een

Condition: new, Year of construction: 2013, functionality: fully functional, Dürr RAM Station Double barrel pump Pumps and dosing concept MPDK X20: Type L10011525 - Pneumatic gun PVA08/40 - Heatable hose KMHH6007/040 Hfjdpfxou Eqkvs Ag Een - Electric dosing unit ED150/7 The device is unused!!!

Condition: used, Year of construction: 2004, Batch size (max., approx.) 1.340 x 480 x 480 mm charge load ca. 200 kg output rate ca. 3.000 kg/h cycle time ca. 4 min Loading height 460 mm heating capacity 150 kW heating time ca. 3 Std. required air pressure 6 bar Fresh water 3 bar Number of working hours ca. 77.034 h total power requirement ca. 192 kW weight of the machine ca. 11 t dimensions of the machine ca. 3,60 x 10,10 x 3,25 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale. Hjdpfszhxm Aex Ag Esfn

Condition: used, Year of construction: 1998, cleansing medium Per filling amount 15.000 l heating capacity 275 kW Cooling capacity 43 kW Batch size LxWxH (max., approx.) 2.250 x 1.00 x 1.150 mm Batch weight (approx.) 1.000 kg Throughput (approx.) 2 Chargen/h Hfedjzid Dvjpfx Ag Esn Cycle time (approx.) 30 min Loading height 1.010 mm Distillate output (approx.) 1.000 ltr/h base area 20 x 10 m Number of working hours ca. 67.904 h connected load 122 kW connected load frequency 3 x 400 V ampere 262 A dimensions ca. 15.000 x 8.200 x 6.00 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Dimensions and weights - Overall dimensions Length: 15,000 mm Width: 8,200 mm Height: 6,000 mm - Vacuum chamber (usable dimensions) Length: 1,630 mm Width: 3,500 mm Height: 1,510 mm - Product weight: 200 kg Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Compressor, Dürr-Dental 75L Oil-Free Dental Compressor with Refrigerated Dryer, Used Machine Manufacturer: Dürr Dental GmbH Type: 3621 / 14933 Overall dimensions: Width: 700 mm Depth: 550 mm Height: 890 mm Hjdpfx Agey Udfms Esfn Weight: 95 kg Tank capacity: 75 liters (Manufacturer: Silit-Werke) Power: 1.5 kW Intake capacity: 235 liters/minute Maximum operating pressure: 10 bar Speed: 1420 rpm Design: 3-cylinder, single-stage, completely oil-free compressor unit Year of manufacture: 1983 (extremely durable heavy-duty cast iron construction) Power supply: 400 V The special feature of this unit is the factory-installed high-capacity refrigerated dryer / condensing unit (the copper coil tower mounted on the side of the machine), which completely removes moisture from the compressed air. Since it produces 100% oil-free, dry and clean compressed air, it is perfectly suitable for dental clinics, dental laboratories, pharmaceutical/laboratory applications, or even precision industrial equipment (such as CNC machines, laser and plasma cutters), where even minimal moisture or oil vapor could damage the system.

Condition: reconditioned (used), Cleaning agent: hydrocarbon or modified alcohol. Hjdpfx Ajznhgrog Eefn

Condition: good (used), Year of construction: 1999, Aqueous cleaning system in good condition with vacuum dryer (pump not included). Hfjdpfed Nnvhex Ag Esn Available immediately.

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower, dry suction -Manufacturer: Dürr-Dental, side channel vacuum pump side channel compressor for dry suction -Type: 9000.102.09 Hfodpfoupbcvsx Ag Ejn -Drive: 220 V / 370 W -Connection input: Ø 32 mm -Connection output: Ø 32 mm -Dimensions: 310/260/H270 mm -Weight: 14.8 kg

Year of construction: 2023, condition: used, Anthos A5 / Class A5 is a dental treatment unit with a dental chair. Hfsdjztxzdepfx Ag Esn 0300 1 50679 Anthos A5 International Serial number 711B0038 19,962.30 € 0310 1 9021377 Patient chair A2.5L RL wide included in the package 0320 1 829346 Standard headrest included in the package 0330 1 831843 Wide upholstery, blueberry/purple 132 included in the package 0340 1 829154 Left armrest included in the package 0350 1 9021477 Pneumatic brake included in the package 0360 1 9021416 6F syringe, angled included in the package 0370 1 9021387 Light turbine unit included in the package 0380 2 9021398 Light motor i-MMr L LED included in the package 0390 1 9021438 ZEG u-PZ 7 E with light included in the package 0400 1 9021455 Asymmetrical tray table included in the package 0410 1 829383 Sprayer heater included in the package 0420 1 829204 Assistant element, 3 holders, DG arm included in the package 0430 1 612043 Spray mist extraction unit included in the package 0440 1 612045 Saliva ejector included in the package 0450 1 829334 Mouthwash basin, glass, manual included in the package 0460 1 829143 Dürr mouthwash basin valve included in the package 0470 1 443132 Smooth suction hoses included in the package 0480 1 829264 Wet suction unit included in the package 0490 1 829362 Valve for central wet suction unit included in the package 0510 1 829215 Hygiene container SHS included in the package 0520 1 9021460 Power pedal included in the package 0530 1 829278 Venus plus L Led No-Touch included in the package Former new price Total: 56,494.30 €

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,381 h, functionality: fully functional, machine/vehicle number: AS0211, spindle speed (max.): 5,000 rpm, travel distance X-axis: 180 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 704 mm, controller model: FANUC SERIES 31 i-MODEL A, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the specified periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS TRAVEL DISTANCES X1-axis: 180 mm X2-axis: 180 mm Y1-axis: ±45 mm Z1-axis: 704 mm Z2-axis: 620 mm E2-axis: 720 mm Rapid traverse X/Y/Z-axis: 30 m/min SPINDLE 1 Max. speed: 5,000 rpm Spindle nose: A6k Spindle bore: 65 mm Draw tube bore: 65 mm Hfjdpsym Ai Hefx Ag Ejn Chuck diameter: 210 mm Drive power: 24 kW SPINDLE 2 Max. speed: 7,000 rpm Spindle nose: Ø 110 mm Spindle bore: 42 mm Draw tube bore: 42 mm Chuck diameter: 140 mm Max. chuck jaw weight: 1.25 kg Output power: 16.5 kW Max. speed for driven tools: 8,000 rpm Number of tool turret stations 1: 12 Number of tool turret stations 2: 10 All tool positions are driven MACHINE DETAILS Control: FANUC SERIES 31 i-MODEL A Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 80 A Dimensions & Weight Installation dimensions (L x W x H): 4,500 x 2,400 x 2,400 mm Machine weight: 9,000 kg Read operating hours: 5,381 h EQUIPMENT Chip conveyor by KNOLL Tool holders (as shown in the photos are included) External reference: Dürr

Condition: good (used), Differential pressure indicator, transmitter, monitor, sensor, differential pressure indicator, differential pressure switch -Manufacturer: Dürr -Part No.: 4Q Article No.: DE45E50040PKD232 -Basic measuring range: 0...10 kPa -Dimensions: 105/90/H70 mm Hodpfx Asfm T Ewjg Eefn -Weight: 0.3 kg

Condition: used, Year of construction: 2000, Fully automatic machine to affix promotional inserts Equipped with: Books pile feeder Feeding Measuring book height Opening cover Counting/opening Tearing Feeding promotional material Separating promotional material Adjusting promotional material Cutting promotional material Hedpjy Syr Djfx Ag Esfn Gluing promotional material Sticking in Pressing Delivery Technical data: Max. size: 316 x 216 mm Min. size: 90 x 60 mm Max output: 1200 pieces/hour Thickness 3 – 25 mm Promotional inserts: single/folded sheets, thinly bound products (max. 1,5 mm thick) Dürrer promotional/explanatory video:

Condition: used, Year of construction: 1997, Fully automatic index cutting machine Equipped with: Feeding Opening Counting/cutting 1 Counting/cutting 2 Printing station 1. colour Printing station 2. colour Delivery Technical data: Hsdpsy Syulofx Ag Eefn Max. size: 185 x 130 mm Min. size: 50 x 60 mm Book thickness max. 15 mm (depending on product) Binding category: all standard binding sorts Cover bendable (no hardcover) Cut form angular cut Types Printing European/Arabic index combined indexes double and multiple indexes Printing: one or two colours letters and words Dürrer promotional/explanatory video: