Used Cylinder 1350 + Screw 55 Mm for sale (81,678)

Year of construction: 2004, condition: excellent (used), Cylinder 1350 + 55 mm screw Year 2004 Rcodpfor Avfvox Afwsf LD 24

Condition: good (used), Technical data for the pallet rack beam: Racking system: Jung Heinrich Type: Esmena Scope of delivery includes: Rodew Upxwjpfx Afwjcf 01x Pallet rack beam, used Material color: green Box profile: 155 x 55 mm Claw: 4 hooks Clear span: 3,610 mm 02x Safety pin, used Design: fully galvanized For securing the cross beams against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the article: This item is offered for collection only. Any requested transport or shipping of this item is subject to additional costs, which can be individually inquired at our company depending on the delivery location and scope.

Condition: good (used), The scope of delivery includes: 1x used pallet racking beam Material color: orange IPE profile: 100 x 55 mm Connector: 3 holes Clear width: approx. 2,700 mm 3 holes per connector Hole spacing: approx. 100 mm Hole diameter: approx. 11 mm Rcodpfx Ajibzftofwjf 1x set of fastening material consisting of: 06x screws M10 06x nuts 06x washers

Condition: good (used), Technical data for pallet rack beam: Racking system: SLP Included in delivery: 01x Pallet rack beam, used Material color: grey Rcedpfjxnzdkjx Afwjf IPE profile: 100 x 55 mm Bracket: 3 HK (hooks) Clear span: 3,000 mm 02x Locking pin, used Design: fully galvanized For securing the cross beams against unintentional lifting Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is desired, this will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), Technical Data for Pallet Rack Beams: Racking System: SLP Scope of Delivery Includes: 01x Pallet Rack Beam, used Colour: grey INP Profile: 100 x 50 mm Bracket: 3 hooks (Agraffe 3 HK) Clear span: 2,000 mm 02x Safety Pin, used Design: fully galvanized For securing the cross beams against unintentional lifting Your contacts at our company: Rsdexyvznjpfx Afwscf Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be queried separately depending on the place of delivery and the scope of delivery.

Condition: good (used), The scope of delivery includes: 1x used pallet rack beam Rodoibzgxjpfx Afwscf Material color: orange IPE profile: 100 x 55 mm Bracket: 5 holes Clear width: approx. 2,700 mm Per bracket: 5 holes Hole spacing: approx. 50 mm Hole diameter: approx. 11 mm 1x set of fastening materials consisting of: 10x M10 screws 10x nuts 10x washers

Condition: used, Hard stone plate, granite plate, granite block, measuring cube Hard stone block, angle block, precisely machined on all sides The granite plate comes from a measuring machine Rjdpfx Ajh Uhq Djfwocf Dimensions of the large table surface L x W x H: 1350 x 1000 x 300 mm Dimensions of the small table surface L x W x H: 1350 x 300 x 245 mm Working height approx. 700 mm - 5 support blocks with leveling screws, approx. 400 mm - 8 threaded bushings in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm) - 4 threaded bushings M16 - small chip on one plate edge Overall dimensions L x W x H: 1350 x 1350 x 300 mm Weight of the measuring plate: 1500 kg Weight of the granite feet: 100 kg Very good condition

Condition: used, Year of construction: 2007, RA1784 Pallet rack system Galler OMEGA used 16600 x 5400 x 1350 mm Installation in a hall Shelf height: 5.400 mm shelf depth: 1.350 mm clear field width: 3.200 mm stored goods: pallets with stored goods Deep storage: 1,350 mm Storage arrangement: 1. stored goods on the floor 2. to 5 stored goods on pairs of tie bars, Rcsdpfx Ask Abbbjfwof Shelf load on pair of spars at daylight Field width of 3.200 mm and : 2.100 kg shelf height 1.500 mm Field load: 8.4 to. at 1,500 mm buckling length (min. 4 fields) →Alle Loads are understood to be with evenly distributed load. Painting: Upright frame: Sendzimier galvanized Support beam: RAL 7035 light grey WITH RUST SPOTS (SUPERFICIAL) Installation: 1 pc. one-sided shelf axis, standing on a hall wall 5 x 3,300 + 100 = total length 16,600 mm consisting of: 6 pcs. stand frame Galler Omega screwed 5.400 x 1350 mm 40 pcs. carrier beam Galler Sigma 3.200 mm 80 pcs. safety pins Price net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Würzburg Optional if required 2 pcs. ram protection corner used At the beginning or end and at passages to protect the shelf stem For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Used Envites model K800/55-50/30 chamber type filter press. Filtration surface: 49,5 sqm Chambers & Plates: 50 chambers, thickness 30 mm, (49) polypropylene 800x800 mm recessed plates and (2) end plates Cake volume: approx. 673,5 litre Others: max. filtration pressure 16 bar, closed delivery, (5) eyes per plate, double acting hydraulic ram with hydraulic agregate, plate shifter, CE Marked, ES Declaration of Conformity, Comprehensive technical documentation included. Specifications: Material: Carbon steel/polypropylene Plate Size: 800 x 800 # of Plates: 49 Delivery: closed Eyes: 5 Cake Capacity: 670 Plate Type: recessed Plate Thickness: 60 Rjdpfxszun Dwj Afwscf Surface Area: 49,5 Closure: hydraulic Operating Pressure: 16 Weight: 5500

Condition: new, Year of construction: 2025, operating hours: 2 h, machine/vehicle number: LENTO 55WK, New Speed-controlled, oil free, water injected screw compressor ALMIG LENTO 55 LK Year of construction: 2025 technical spezifications: Rsdpfsc Rt D Njx Afwecf Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with Rcedpfeznkx Dsx Afwjf several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear: Spur gear with straight teeth -Gear: Diameter Ø 113 mm / 43 teeth -Tooth width: 25 mm -Shaft mount: inner Ø 32 mm -Bolt circle: Ø 70 x 12 mm -Dimensions: see photo technical drawing -Number: 3x gear shaft available -Price: per piece -Dimensions total: Ø 113 x 25 mm Rcedpfx Aoxf An Eofwsf -Weight: 1.4 kg/piece

Condition: good (used), Machine Reamers, Reamer, Reaming Tool, Passknife Cutting Set Rodpfsiay Hhox Afwscf -Reamers: machine reamers 36 pieces -Mount: Ø 16/22 mm -Diameter: 31.75 to 55 mm, see photo parts list -Transport dimension.: 240/230/H80 mm -Total weight: 18.5 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange Rodpfxow Dphlo Afwscf -Grinding wheel holder: with grinding stone, 2 pieces -Mounting: Hole shaft cone Ø 44-55 mm -Grinding wheel: Ø 270 mm, see photos -Shipping/Price: complete -Dimensions each: Ø 270 x 80 mm -Weight: 9.7 kg/piece

Condition: used, Motor clamping rails, motor clamping rails, motor clamping system, for electric motor, gear motor -Motor tensioning rail: 2 pieces -Groove width: 14 mm, length 380 mm Rjdeux R U Ujpfx Afwocf -Hole spacing: 470 mm / Ø 14 mm -Delivery/Price: complete -Dimensions: 500/55/H72 mm -Weight 3.1 kg/piece

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Hydraulik Griessen, double-acting hydraulic cylinder stroke 150 mm -Type: HN3-GHI 80/55-150 DH -Piston rod: Ø 55 mm / M34 -Hole: Ø 40 mm -Dimensions: Ø 128 x 545 mm -Weight: 24.4 kg Rcodov N E Igopfx Afwsf

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate, -T-slot plate: clamping plate with solid base frame Rcodpfxehuf Iaj Afwjf -Length: 1350 mm -Width: 1150 mm -Plate thickness: 100 mm -Plate: with support ribs -Groove width: 26 mm -Groove spacing: 110 mm -Dimensions total: 1350/1150/H825 mm -Total weight: 1000 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 55 mm -Type: Mubea 55 1-4 holder Ø 50 mm -Die: Ø 150 mm Rcodpjiqhhvsfx Afwsf -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg

Condition: good (used), Bending tool, die, upper blade, top tool, deer foot tool, deer foot tool for press brake -Tool: for press brake Rsdjb A Nluepfx Afwocf -Dimensions: 20 x 160 mm -Recording: 35 x 31 mm -Length: 2680 mm -Weight: 110 kg

Year of construction: 2009, condition: good (used), hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Pressure force: at 250 bar 96 to -Piston diameter: 220 mm -Piston rod: Ø 125 mm -Cylinder tube outside: Ø 260 mm -stroke: 495 mm -Total length retracted center hole: 1195 mm -Piston rod mount: Ø 100 mm -Cylinder mount: Ø 100 mm -universally applicable: Rodpfx Aodq U S Iefwjcf -Number: 15x cylinders available -Price: per piece -Dimensions: 1360/530/H300 mm -Weight: 364 kg/piece

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone Rcjdpfx Afew Dnv Uowjf -Mounting: Hole shaft cone Ø47-55 mm, thread M60 see photos -Grindstone: Dorfnerwerk Type 5A 120-JOT8-UEH 400 x 20 mm -Transport dimensions: Ø 430 x 80 mm -Weight: 26.4 kg

Condition: good (used), Machine reamers, reamer, reaming tool, locating cutter set, attachment reamer Rjdpfxsyz Ix Do Afwecf -Machine reamer: adjustable, 2 pieces -Diameter: Ø 32/55 mm -Mounted holder: MK3 -Submission/Price: complete -Transport dimensions: 360/90/H60 mm -Weight: 3.6 kg

Condition: good (used), Interchangeable jaws, top jaws, segment jaws, clamping jaws, block jaws, base jaws, four-jaw chucks, four-jaw lathe chucks, 4-jaw chucks, faceplate, faceplate chucks, facing lathe chucks, clamping device for dividing head -Clamping jaws: 4 pieces for four-jaw chuck, faceplate chuck, dividing head Rodpjv U R Ehefx Afwocf -Clamping width: 55 mm -Dimensions: see photo -Shipping/Price: complete -Dimensions: 200/60/H140 mm -Weight: 3.4 kg/piece

Condition: used, Energy chain, cable drag chain, energy chain -Passage: 300 x 55 mm -Dimensions: 2515 x 340 x 85 mm -Weight: 20 kg Rcjdjd Tlx Hjpfx Afwsf

Condition: good (used), Screws, hex bolts, flange nuts, hexagon nuts, collar nuts, solar fasteners, cylinder screws Redpfx Afoq Nqxdowscf -Hex bolts/cylinder bolts: M10 stainless steel 330 kg -Hexagonal screws: DIN 933 M10 x 100 300 pcs / M10 x 20 4400 pcs -Cylinder head screws: DIN 912 M8 x 35 6600 pcs / M8 x 30 4200 pcs -Material: Stainless steel A2 -Price/Sale: complete -Transport dimensions: 1200/800/H200 mm -Total weight: 330 kg