Used Compressor And Compressed Air Treatment for sale (32,642)

Condition: new, Year of construction: 2022, operating hours: 5 h, functionality: fully functional, overall weight: 290 kg, total length: 1,430 mm, total width: 660 mm, total height: 1,250 mm, fuel type: electric, volume flow: 15 m³/h, noise level: 54 dB, protection type (IP code): IP55, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Scroll compressor with integrated compressed air treatment system Manufacturer: AIRPOL (Poland) - 2022 Model: SRKT 2 Hnjdpfx Aasxyhdbj Eop The compressor delivers oil-free air, dried to a pressure dew point of +3°C. Operating hours: 5h Overpressure: 0.8 MPa Capacity: 14.4 m³/h Dimensions (L x W x H): 1430 x 660 x 1250 mm Compressed air connection: G½ Weight: 290 kg Tank capacity: 240 litres Ambient temperature range: +5 to +40°C Cooling air requirement: 400 m³/h Compressed air temperature: approx. 15°C above ambient temperature Refrigerant: R134A - 0.35 kg Noise level: 54 dB(A) Drive transmission: belt drive Nominal motor power: 2.2 kW Motor energy efficiency class: IE3 Motor protection rating: IP55 Power supply: 400/3/50 V/Ph/Hz Recommended supply cable cross-section: 5x1.5 mm² Protection: A16 Dryer pressure dew point: +3°C Compressed air purity class according to ISO 8573.1: 1.4.1 Microprocessor controller: MS-286 Airpol Power Control

Condition: good (used), Motor output 1 kW Max. pressure 16 bar Hnsdpfx Aasvwgn Ro Ejp

Condition: used, Year of construction: 2008, Air consumption 42,83 m³/min Motor output 250 kW Overall size 4000 x 2100 x 2500 mm 0 min. 4 bar 0 max. 13,5 bar Hsdsvx Uvlepfx Aa Ejnp Weight 20.000 kg Dimensions (LxWxH) 13,00 x 2,95 x 2,90 m The pneumatic container is used to provide oil-free dry Compressed air (42 m³/min max. 7.5 bar) for test facilities and consists of a self-contained container functional unit, in which the following Machines, as shown schematically in Figure 2, were integrated: - Compressor EKO 250 D - Refrigeration dryer HHDp 4500/HF 5-M/5 - Activated carbon adsorber BEKO Clearpoint L 3400 V - Post-filter HF 6-60 - Oil-water separator BEKO Öwamat 16 - El. Steam trap BEKO 14

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Auction of two Kaeser screw compressors, one Kaeser refrigeration dryer, and one compressed air tank! Screw compressor Kaeser SK 22 Year of manufacture: 2020 Screw compressor Kaeser SK 19 Year of manufacture: 1995 Hnsdpfx Aajzktnys Eep Refrigeration dryer Kaeser TB 26 Year of manufacture: 2016 Compressed air tank Volume: 500 l Year of manufacture: 1986

Condition: used, Screw compressor WORTHINGTON - CREYSSENSAC, type Rollair 40 -- RLR 40BM6 Hjdjfmim Uspfx Aa Ejnp Manufacturer's serial number: 6240330200 Year of manufacture: 2003 Volumetric flow rate: 4.6 m3/min. Pressure: 10 bar Main motor power: 30 kW Power supply: 400 Volt, 50 Hz Connection thread: 1 1/2 inch - 36022 operating hours recorded (compressor running time) - 19257 operating hours recorded (load hours) - Sound-insulated Space requirement L x W x H: 1850 x 1050 x 1760 mm Weight: 910 kg Good condition

Condition: used, Oil-water separator KAESER BEKO, type Öwamat Tank diameter: 600 mm Overall height: 1200 mm With activated carbon filter Hsdoy Ty Saopfx Aa Eonp Space requirement: Ø 700 x 1200 mm Weight: approx. 30 kg In good condition.

Condition: used, Compressed air dryer PARKER HIROSS for compressor systems Mechanical condensate separator, water separator Refrigerant dryer with water-cooled aftercooler for removing water vapor and cooling the compressed air or gases. 1 aftercooler, type WFN009 DHH16 Air flow rate (normal): 540 m3/h = 9000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1030 x 850 x 200 mm + 1 water separator, type CSP 008 Flow rate (normal): 480 m3/h = 8000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum Hnsdjdzqn Uspfx Aa Ejp + 1 mechanical condensate separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - Operates without compressed air loss All components mounted as shown in the pictures. Height when mounted vertically: 2000 mm Total weight: approx. 40 kg

Condition: used, Piston Compressor KAESER Type EPC 630-250 Hjdpfx Aaswypqre Eonp Serial No.: 1802334 Year of manufacture: 1992 Free air delivery at 6 bar: 440 liters/min. Maximum intake capacity: 630 liters/min. Output pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Connection: 400 Volt, 50 Hz (with 16 Amp plug) - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar - Run time from 0 bar to switch-off pressure of 10 bar = 5 min Space required (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg In good condition

Condition: used, Screw compressor, KAESER, type BS 50 Manufacturer's serial number: 402852, year of manufacture: 1990 Volumetric flow rate: 5 m³/min. Pressure: 7.5 bar Main motor power: 30 kW Mains connection: 400 volts, 50 Hz Connection thread: 1 1/2" - Operating hours recorded: 1107.90 - Load hours recorded: 749.00 - Soundproofed Space requirements (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Hjdpfxjiyu Ifs Aa Ejnp Very good condition Previously used as a reserve compressor and has only a few operating hours.

Condition: used, Filter assembly, COMPAIR filter unit for compressor systems Hedpfehalvdjx Aa Eenp Compressed air filter Type: CF 0087B ZP Manufacturer's number: 3363006 / 05 / 005 Operating pressure: max. 16 bar Threaded connection: G 1 1/2" Flow rate: approx. 8.5 m³/min Filter element number: CE 0087B - Filter housing made of aluminum Weight: 5 kg Dimensions L x W x H: 125 x 110 x 420 mm Good condition

Condition: used, Filter assembly, DONALDSON ULTRAFILTER filter unit for compressor systems Double filter, stage filter Normal volume flow: 1440 m³/h = 24,000 liters/min Housing size: 0072 Hodpfjxf Uukex Aa Esnp Tank volume: approx. 5 liters 1 unit with fine filter element (size 20/30) 1 unit with pre-filter element (size 20/30) Operating pressure: max. 16 bar Threaded connection: G 2 1/2" Flange connection: DN 100 Flange installation width: 580 mm - Differential pressure gauge - Automatic condensate drain UFM T10, 230 Volt (0.11 liters/min) - Filter housing made of aluminum Weight: approx. 35 kg Dimensions (L x W x H): 1030 x 850 x 200 mm Good condition 2 units available: one each as a coarse and fine filter - suitable for use as a double filter or stage filter.

Year of construction: 2010, condition: excellent (used), Kaeser SM 9 – 11 bar screw compressor Manufacturer: Kaeser Type: SM 9 Machine type: Oil-injected screw compressor Hnjdpfx Aohy Tzyoa Eop Year of manufacture: 2010 Condition: Used screw compressor, ready for operation Max. operating pressure: 11.0 bar Delivery rate: 0.75 m³/min Motor rated power: 5.5 kW Compressed air connection: G 3/4 Electrical connection: 400V / 3Ph / 50Hz Dimensions W x D x H: approx. 630mm x 800 mm x 900 mm Sound pressure level: 64 dB(A) Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective Hodpfxsvmivco Aa Ejnp System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Without guarantee - without warranty -

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 1,180 mm, total length: 1,950 mm, total width: 600 mm, Can an invoice including VAT be issued, but since I am VAT-exempt, it doesn't really make sense. Especially for such a bargain – less than 3,000 euros for a machine that cost almost 9,000 euros when new. Never used, so it's brand new. All information about the machine can be found in the photos. Hedpezlvahsfx Aa Esnp

Condition: used, 2 oil-free screw compressors for the production of sterile compressed air. Of these: - Compressor 1 (year of manufacture 2006): frequency-controlled with built-in dryer - Compressor 2 (year of manufacture 1992): with downstream adsorption dryer (Atlas Copco, 2003) Hjdpszkfw Tsfx Aa Ejnp Additional title: Compressed air generation with screw compressors; manufactured between 1992-2006 Capacity compressor 1: 5.952 m³/min, with a final pressure of 8.4 bar Capacity compressor 2: 4,982 m³/min, with a final pressure of 8.0 bar Features: 2 screw compressor (one of which has a built-in dryer and variable-speed drive, and one with a separate dryer)

Condition: like new (used), Year of construction: 2007, power: 5.5 kW (7.48 HP), For sale is a Solid Air piston compressor (2-cylinder version, 5.5 kW, 2007) in excellent, technically flawless condition – including a matching 500 L compressed air tank (2007). A special feature of this compressor: it was used exclusively as an emergency unit, so it has hardly been run. Accordingly, it has very few operating hours and is in almost new condition, both technically and visually. The compressor has always been regularly serviced, is fully functional, has been inspected, and is ready for immediate use. The included 500 L compressed air tank ensures a consistent, pressure-stable air supply and, by reducing the number of switching cycles, also protects the compressor. Hnjdpfxszlhp Uj Aa Ejp Technical data: - Type: Piston compressor, 2-cylinder - Motor power: 5.5 kW - Compression pressure: 10 bar - Displacement flow rate: 916 l/min - Operating speed: 850 min⁻¹ - Compressed air tank: 500 L (included) - Operating hours: very low (used only as an emergency unit) With our comprehensive all-inclusive package, we will personally take care of the complete service for you – from delivery to the commissioning of your new compressor. This includes unloading, setting up, and aligning the system. Our experienced service technicians will then professionally commission the system, carry out all necessary functional tests, and ensure that your Solid Air compressor, together with the 500 L tank, runs reliably and efficiently. In addition, we offer individual training for your employees so that you can use the system optimally from the start. We will also continue to be available to you after installation – whether for maintenance, technical questions, or future expansions. With our comprehensive all-inclusive package, you don't have to worry about anything – we will ensure that everything runs smoothly and that you can focus entirely on your production. Our service promise: Quality, competence, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians who specialize in compressed air and compressor systems, as well as other machines. We place great value on personal support and will be happy to assist you at any time, even after the purchase. In addition, you have the opportunity to inspect and test the system at any time in our workshop. You are cordially invited to come and see the condition and operation of the system for yourself. You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: used, This listing is for a Jun-Air 6-J mini Air Compressor Used Jun-Air 6-J mini air compressor providing quiet, oil-free compressed air for laboratory instruments and analytical equipment. Hedpfx Aexzg Saea Eonp

Condition: used, Year of construction: 1987, Compressor Make : Ingersol Rand Type : Centac C60Mx2 Centrifugal Original YOC : 1987 Our supplier bought the mc in 1997, fully reconditioned from Ingersol Rand in Belgium , only used for 2 years in 1 shift, thereafter serviced & stored . User was Picanol demo project in Belgium. See below pictures to see condition & completeness of the unit. Air dryer Hiross MDA65 is included in the package. Intake Pressure : 98 kPa Intake Temperature : 15 °C Relative Humidity : 60% Delivered Capacity : 61 m3/min Discharge Pressure : 800 kPa Cooling water temp : 15 °C Cooling water flow : 450 l/min Hsdpfsy Spnuox Aa Eonp Rated speed : 2970 n/min Motor rating : 430 kW

Condition: used, Technical Commercial Datasheet – Integrated KAESER CSDX 165 T Air Compressor Station Manufacturer KAESER KOMPRESSOREN (Coburg, Germany) Type Complete "All-in-One" industrial compressed air station, featuring a fluid-injected rotary screw air compressor with variable speed control (CSDX Series), an integrated refrigeration air dryer (Module T), and an advanced SIGMA CONTROL 2 electronic monitoring configuration. Hodpfx Aaezcaufj Esnp Industrial Applications Continuous, high-efficiency plant air generation for automated manufacturing facilities, heavy assembly lines, packaging plants, plastics processing, and automotive industries. The variable speed drive system matches actual compressed air consumption in real time, eliminating peak starting currents and optimizing plant energy performance. Key Technical Specifications * Main Compressor Unit: KAESER CSDX 165 T (CSDX Series / Integrated Dryer Version) - Technology: Fluid-injected rotary screw compressor featuring premium SIGMA Profile rotors - Regulation System: Variable speed control via an integrated frequency inverter (SFC / Sigma Frequency Control) - Nominal Motor Power: 90 kW - Air Flow Range: Dynamic adjustment based on plant load profile (up to approximately 16.15 m3/min maximum capacity) - Maximum Working Pressure: 8.5 bar max (Current digital setpoint displayed: 7.5 bar) - Integrated Air Dryer (Module T): Refrigeration air dryer utilizing eco-friendly R-513A refrigerant (2.6 kg charge), with a maximum pressure of 32 bar on the cooling circuit side. - Electrical Requirements: 400 Volts / 3-Phase / 50 Hz - Control Interface (SIGMA CONTROL 2): - Total running hours: 26,805 h - Hours under load: 15,272 h - Current system pressure: 0.00 bar (at standstill) / Internal package temperature: 24 °C Machine Utilization This KAESER CSDX 165 T workstation draws ambient atmospheric air and compresses it through its high-efficiency 90 kW fluid-injected screw airend. The frequency inverter continuously regulates the engine speed to prevent the unit from wasting power during low-demand windows. Saturated, hot compressed air exiting the screw block is directed straight into the built-in refrigeration dryer module (Module T). The dryer chills the air stream down to its pressure dew point, condensing and safely discharging moisture to deliver clean, dry, and precisely regulated air to the factory floor line. System Highlights * Compact All-in-One Workstation Footprint: By enclosing the compressor and the refrigeration dryer unit inside a single acoustically insulated cabinet, the station significantly reduces necessary floor space, transport overhead, and engineering installation costs. - SFC Variable Speed Energy Efficiency: The dynamic matching of motor output to actual pneumatic network demand ensures a highly optimized electrical power factor and an exceptionally competitive cost per cubic meter of air. - Intelligent SIGMA CONTROL 2 Management: This interface monitors all critical operating metrics (pressions, temperatures, and maintenance schedules), ensures advanced industrial network compatibility, and confirms a healthy machine history with low un-loaded idling hours (only 43% idle time relative to total run metrics). - Future-Proof Eco-Refrigerant: The integration of R-513A refrigerant meets strict international F-Gas environmental guidelines, securing the long-term operational legality of the cooling loop without risks of sudden regulatory phase-outs.

Year of construction: 2022, condition: used, Used machine Year of manufacture: 2022 Condition: like new, only a few operating hours, not used in production Equipment and technical data: - Compact screw compressor with variable speed control and innovative LOGIN control system - With tank and refrigerant dryer - Maximum pressure: 10 bar - Effective delivery rate: 1,050 l/min - Motor power: 7.5 kW - Noise level: 62 dB(A) - Connection: 1/2" - Tank volume: 270 liters (AD2000) - Frequency-controlled - Electronic control - Oil heat exchanger - Compressed air tank, internally and externally hot-dip galvanized - Drive transmission: direct coupling - Circuit: star-delta Hnodpfexdplbox Aa Eop - AD 2000 compliant: yes Dimensions: 1,200 × 650 × 1,540 mm Weight: 295 kg Availability: short-term Location: Röllbach

Year of construction: 1988, condition: good (used), A complete Atlas Copco air compressor including Donaldson Ultra Filter and a Tank in good working condition Hnedpfohpx U Asx Aa Eop

Condition: good (used), Year of construction: 2018, ALMIG Variable 90 screw compressor, no. S0050145, year of manufacture 2018, 100 kW Hodpfx Asunwf Doa Eenp

Condition: used, Year of construction: 1990, Industrial stationary piston air compressor in sound-insulated steel cabinet. Manufacturer: Reflex Model: ZU 57/3 – Typ 180 D Air receiver: 180 liters Made in Germany Complete unit including: Piston compressor Electric motor 180L air tank Pressure switch Noise reduction enclosure Condition: Used – Not tested. Hjdpfx Aeyl Nz Hja Ejnp Sold as seen, ex works. Suitable for refurbishment or spare parts.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,848 kg, Equipment: type plate available, Technical details: Voltage: 400V Hnsdowrrgmjpfx Aa Ejp Phase: 3 Frequency: 50 Hz Volume flow: 13.98 m³/min Speed: 4050 rpm Intake pressure: 1 bar Installed motor power: 75 kW Compression medium: air Stage pressure: 13 bar g Full load current: 159 A The CompAir screw compressor L75SR-13A is a reliable and powerful solution for compressed air supply in industrial applications. This model impresses with its robust design, high efficiency, and easy operation. It is specifically designed for continuous use and provides stable compressed air performance that meets the requirements of various businesses. Thanks to its compact design, the L75SR-13A can be flexibly integrated into a wide variety of systems and ensures smooth operation with minimal maintenance effort.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: A34904774, overall weight: 1,765 kg, Equipment: type plate available, Technical details: Voltage: 400 V Hnjdpfxewtfk Uj Aa Esp Phase: 3 Frequency: 50 Hz Air flow rate: 12.44 m3/min Speed: 3000 min-1 Intake pressure: 1 bar Installed motor power: 75 kW Compression medium: air Stage pressure: 10 bar g Full load current: 169 A The CompAir L75-10 A screw compressor is an efficient and reliable solution for compressed air supply in industrial applications. Thanks to its modern technology, it operates energy-efficiently and ensures stable compressed air performance. The compressor is equipped with integrated heat recovery, allowing the useful utilization of the waste heat and further reducing energy consumption.