Used Cole Palmer Techne Blockice for sale (585)

Condition: used, This listing is for the Cole Parmer Techne Blockice Cooling Heating Block Nwedpfx Ajxhfypomyoi The unit is in full working condition and is ready for immediate use The Cole Parmer Techne BLoCKICE (also referred to as CB-200, FBLOCKICE) is a benchtop Peltier-cooled/heated block designed for precise incubation of sample tubes between 0 °C and 40 °C, ideal for maintaining biological samples within the 4–37 °C range Precise temperature control: Utilizes Isotemp™ technology to ensure uniform temperature across both aluminum blocks, with stability to ±0.2 °C Versatile block inserts: Holds two standard interchangeable aluminum insert blocks from the Dri‑Block® range; can use one double-width insert for higher tube volumes Timer & alert system: Integrated count-up/count-down timer programmable up to 9 days. Timer begins only once the set temperature is achieved, with an audible buzzer at completion User-friendly interface: Features a five-digit LED display in °C or °F, plus a dark lid to protect light-sensitive reagents and help maintain temperature Dimensions & build: Compact footprint (~190 mm × 240 mm × 225 mm), weighing ~3 kg, operating on 100–230 V AC, 50/60 Hz Performance notes: Achieves 4 °C within ~30 minutes at 20 °C ambient; reaching extremes like 0 °C or 40 °C may take hours, although pre-cooling inserts can accelerate that

Condition: used, This listing is for the Cole Parmer MasterFlex LS Pump Head 07528-10 with easy load ll pump head The unit is in full working condition and is ready for immediate release Cole-Parmer Masterflex L/S Easy-Load II Pump Head The Cole-Parmer Masterflex L/S Easy-Load II Pump Head is a high-performance peristaltic pump head designed for laboratory and industrial applications that require precise fluid handling. This updated model builds upon the original Easy-Load design, offering enhanced features for improved efficiency and ease of use. Key Features New Design and Automatic Tubing Retention: The updated design allows for easy tubing changes without removing the head from the drive. Automatic tubing retention secures the tubing without the need for manual adjustments, simplifying setup and reducing the risk of errors. Three-Roller Design: This design provides smooth and consistent flow, reducing pulsation and improving fluid transfer performance. Adjustable Occlusion: Fine-tune the occlusion to balance tubing life and pressure performance. By adjusting the "squeeze" on the tubing, users can optimize pressure, suction capabilities, and extend tubing life. Stainless Steel (SS) or Cold-Rolled Steel (CRS) Rotor/Roller: Choose between stainless steel or cold-rolled steel for increased durability and enhanced chemical resistance, catering to various operational needs. Nedpfx Aexuqh Eomyswi Stackable Design: The pump head is stackable for multichannel applications, and the rollers are offset by 45° to minimize pulsation when multiple pump heads are combined. Compact Design: The compact design ensures efficient use of space in laboratory or industrial setups. Multiple Tubing Sizes Compatibility: The pump head accepts various tubing sizes, including L/S 13, L/S 14, L/S 16, L/S 25, L/S 17, and L/S 18. This provides maximum flexibility for different fluid handling applications. Automatic Tubing Retention for Easy Setup: The automatic tubing retention system eliminates the need for manual adjustments, ensuring an easy setup process, improved tubing life, and better overall performance. Flow Rate Range The pump supports flow rates from 0.06 to 2300 mL/min, depending on tubing size and drive settings, providing flexibility for a wide range of applications.

Condition: used, Year of construction: 2000, machine/vehicle number: SO117, Used HDPE 4+4 Blow Molding Machine TECHNE SYSTEM up to 2700 bphMain Technical Features and Premium UpgradesThis HDPE Blow Molding Machine offers a highly specialized system for blow molding containers made of high-density polyethylene (HDPE). Specifically, this is a TECHNE 4000 T660 manufactured in 2000, which is preserved in an OPTIMAL state of cleanliness and order. Reflecting its meticulous maintenance history, the machine was cleaned daily in the lower section, and completely blown and cleaned once a week, starting from the extruder down to the bottom.In December 2023, the system received a brand-new retrofit consisting of a latest-generation Gefran PLC equipped with a color touch screen, fully customizable functions, and complete machine control via HMI. This upgrade also features a Gefran GFC modem for remote assistance.The machine operates with a 4+4 cavity double head configuration with a 150 mm cavity spacing, handling bottle formats up to 2 liters and producing up to 2700 bottles per hour (bph). This design optimizes production with a symmetrical and highly efficient layout. Furthermore, the system is equipped with proportional hydraulics for movements utilizing Rexroth hydraulics, along with independent control of 8 parisons. It features 8 parisons with independent profiles managed by Moog servovalves, offering precise parison control up to 400 points.The production line comes exceptionally well-equipped with peripheral machinery, including a complete plastic loader kit with a Moretto mixer, a Tria granulator (2022), and a Villani double leak tester (comprising 2 independent leak testers). Additionally, an extensive complete replacement kit is included. These spare parts encompass:All Rexroth proportional movement valves (carriage, nozzles, and molds)All linear transducersCarriage translation columns complete with a full set of bushingsClosing lever equipped with bushings and pinsA Voith hydraulic pumpAll ATOS hydraulic cylindersA brand-new direct current (DC) extrusion motorA brand-new direct current (DC) inverterVarious mechanical parts, heating elements, nozzles, cores, and diesYou can access this machine starting mid-October.Mold Configuration and FlexibilityTo ensure high precision in shaping bottles, the blow molding system provides a cavity spacing of 150 mm. Additionally, the machine includes a double carriage with a 660 mm carriage stroke, which allows you to control the production cycle optimally and minimizes downtime. In particular, this Blow Molding Machine accommodates containers up to 2 liters, giving you significant flexibility in producing various types of packaging. The system supports both straight or inclined blowing (up to 30 degrees), adapting easily to different container geometries.The extrusion system features a 100 mm / 25 L/D extruder equipped with a vertical filter. Although the machine does not include molds in its standard supply, it supports a wide range of mold sizes, up to a maximum capacity of 2 liters. Furthermore, you can easily adapt the entire system to meet specif... Nodpevgvkaefx Amyewi

Condition: good (used), Cole Parmer vacuum furnace Cole Parmer vacuum furnaces are designed for drying under carefully controlled conditions - normal atmosphere, vacuum up to 30" Hg or inert gas atmosphere. The furnace enables drying, vacuum embedding, electroplating and processing of electronic components. Non-corrosive, non-flammable gases such as nitrogen and carbon dioxide can be used in the furnace. All controls and connections (except the power supply) are located on the front in a vertical panel. Manufacturer: Cole Parmer Nwjdpfowxxgajx Amyji Model: 5053-12 Power: 600 W Voltage: 240 V Dimensions: 510 x 420 x 1200 mm You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, This listing is for 1 of 2 Cole Parmer MasterFlex L/S 7554-95 Peristaltic Pump with a Masterflex Easy-Load 3 pump head . The unit is in full working condition and is ready for immediate release. The Cole-Parmer MasterFlex L/S 7554-95 Peristaltic Pump is a versatile and reliable solution for accurate fluid transfer in laboratory, pharmaceutical, and industrial environments. Designed to handle a wide range of flow rates and fluid viscosities, this peristaltic pump offers precision, ease of use, and durability. Key Features: Flow Rate: Delivers flow rates from 0.6 to 3400 mL/min, adjustable based on the tubing size used. Variable Speed Control: The pump operates at speeds between 6 and 600 RPM, allowing precise control of flow. Reversible Pumping: Enables bi-directional flow for easy priming, purging, and efficient fluid transfer. Nedpoxv A Sxjfx Amyewi Digital Display: Provides a clear, easy-to-read display showing speed, direction, and operational status for precise monitoring. Easy Maintenance: Tool-free tubing changes and a low-maintenance design for efficient operation. Compatibility: Works with a variety of MasterFlex L/S tubing, ensuring adaptability for different fluid handling needs. Durable Construction: Engineered for reliable, long-term use, with corrosion-resistant materials to withstand demanding applications. Specifications: Flow Rate Range: 0.6 to 3400 mL/min Speed Range: 6 to 600 RPM Power Requirements: 90-260 VAC, 50/60 Hz Operating Temperature: 0 to 40°C (32 to 104°F) Dimensions: 8.6" H x 9.4" W x 11.1" D (21.8 cm x 23.9 cm x 28.2 cm) Weight: 15 lbs (6.8 kg) The Masterflex Easy-Load 3 pump head is designed for user-friendly operation and fast tubing changes. Key features include: Automatic Retention Mechanism: The spring-loaded occlusion lever opens the occlusion bed and retracts the tubing retainers, allowing tubing to be easily loaded and unloaded. Tubing Range: Suitable for use with Masterflex L/S Precision tubing, with a flow range of 0.001 to 2900 mL/min depending on tubing size. Stackability: Up to 4 Easy-Load 3 pump heads can be stacked on one compatible pump drive, making it an efficient solution for multi-channel applications. Easy Integration: Same-side tubing entry/exit permits easy integration into space-limited applications, with the option to mount and operate the pump head in any of four positions (depending on the drive).

Condition: used, This listing is for a Cole Parmer Masterflex L/S 7554-95 Peristaltic Pump. The unit is in full working condition and is ready for immediate release. This unit is supplied with no pump head. The Cole Parmer MasterFlex L/S 7554-95 is a high-performance peristaltic pump designed for precise and reliable fluid transfer across a range of applications in laboratory, pharmaceutical, and industrial settings. Its versatile design and robust features make it an essential tool for any fluid handling needs. Features: - Versatile Applications: Ideal for transferring a wide range of fluids, including delicate biological fluids, viscous materials, and corrosive solutions. - User-Friendly Interface: Easy-to-read digital display and intuitive controls for straightforward operation and adjustment. Nedpexxx U Ujfx Amyjwi - Durable Construction: Built for longevity with materials resistant to wear and chemical damage, ensuring reliability in demanding environments. - Quiet Operation: Designed to run quietly, making it suitable for laboratory settings without disrupting workflows. - Safety Features: Includes built-in protection against overload and dry running to extend pump life and ensure safe operation. Key Specifications: - Flow Rate: 0.6 to 3400 mL/min, adjustable based on tubing size - Speed Range: 6 to 600 RPM for precise flow control - Pumping Method: Peristaltic pumping action for gentle and accurate fluid transfer - Reversible Pumping: Supports easy priming, purging, and efficient fluid transfer - Tubing Compatibility: Compatible with a variety of tubing materials and sizes for flexibility Ideal For: - Laboratory fluid transfer, pharmaceutical production, process scaling, and industrial fluid handling.

Condition: used, Year of construction: 2002, Used HDPE Blow Molding Machine TECHNE 10000SFA up to 1690 bph Nwedpfx Aovgvqgsmyei The Used HDPE Blow Molding Machine TECHNE 10000 SFA up to 1690 bph advances the field of HDPE container blow molding machines significantly. TECHNE manufactured this machine in 2002, equipping it with cutting-edge technology and technical specifications that make it high-performance and reliable. Capacity and Implemented Technologies of the HDPE Blow Molding Machine TECHNE The HDPE Blow Molding Machine TECHNE  produces containers with a capacity of up to 1 liter. Additionally, it uses coex-3 layers technology to ensure container quality and consistency. The machine features an 8-cavity extrusion head with a center distance of 105 mm, allowing for efficient production of 8 bottles per cycle. Furthermore, the linear cold blade cutting system and pneumatic pick-and-place system enhance operational efficiency further. Efficiency and Production Cycle The HDPE Blow Molding Machine TECHNE achives a nominal production rate of 1690 bottles per hour (bph). The production cycle time is approximately 16 seconds. Consequently, this machine produces 40,560 bottles daily and 13,141,440 bottles annually, based on 324 working days per year. Therefore, the Used HDPE Blow Molding Machine TECHNE 10000 SFA up to 1690 bph suits large-scale operations perfectly. Detailed Technical Specifications The machine consists of a single station with extruders of diameters 70 mm/25D, 80 mm/25D, and 60 mm/25D, providing a total output capacity of approximately 320 kg/h. Moreover, DC motors drive the extruders, offering respective power ratings of 33 kW, 41 kW, and 24 kW. The total installed power of the machine is 240 kWh, with an average consumption of 80 kWh. Additionally, the mold’s clamping force is 300 KN, ensuring precise and uniform mold closure. Controls and Cutting System of the HDPE Blow Molding Machine TECHNE The control panel allows you to configure and monitor process parameters, including alarm systems. In addition, the machine uses a cold blade parison cutting system and a pneumatic system for bottle pick-and-place. Multiple cylinders control the parison thickness in a closed-loop position cycle, allowing for independent control of the parison profile for each cavity. Post-Overhaul Performance In 2013, technicians overhauled the machine, installing a new B&R PLC to enhance performance and reliability. The mold closing mechanism uses levers and hydraulic actuators, strategically positioned to ensure perfect distribution of clamping force. Similarly, upper and lower deflashing occurs through a single pneumatic actuator. Conclusion of the HDPE Blow Molding Machine TECHNE The HDPE Blow Molding Machine TECHNE efficiently produces high-quality HDPE containers. Its technical specifications and advanced technologies make it an excellent choice for companies requiring high production capacities and long-term reliability.

Condition: used, This listing is for the Techne TC 3000 Well Thermal Cycler The unit is in full working condition and is ready for immediate use The Techne TC‑3000 (models FTC3/02 and FTC3/05) is a compact, robust, and cost-effective PCR thermal cycler, ideal for personal use, educational settings, and basic molecular biology research. Despite its small footprint, it delivers high performance, reproducibility, and flexibility. Nwjdpfxsxhfzae Amyei Key Features Compact and Low Cost One of the smallest and most affordable thermal cyclers on the market. Weighing ~5 kg with a footprint of just 33 × 17 cm, it's perfect for labs with limited space. Available with interchangeable blocks: FTC3/02: 25 × 0.2 mL microtubes FTC3/05: 20 × 0.5 mL microtubes Fast Peltier-Based Cycling Efficient thermal transfer with rapid heating (up to 3.6 °C/s) and cooling (up to 2 °C/s) using advanced Peltier elements. Heated Lid with Selectable Temperature Adjustable from 100–115 °C, the heated lid minimizes condensation and reduces the risk of sample evaporation. It can be enabled or disabled as needed, making it suitable for a range of PCR tubes and strip types. Unparalleled Block Uniformity Delivers consistent results with ±0.1 °C block uniformity at 50 °C, ensuring optimal reproducibility across samples. Wide Temperature Range From 4 °C to 99 °C with precision control (±0.1 °C), supporting even demanding PCR protocols.

Condition: ready for operation (used), Specifications: Output speed: 10 to 600 r/min Torque output, maximum: 180 oz-in. (13 kg-cm) Speed regulation: Line: ±0.25% f.s. Load: ±0.25% f.s. Drift: ±0.25% f.s. Display: four-digit, seven-segment LED Nwodpfx Asxtbgvemyoi Input: Supply voltage limits: 90 to 130 Vrms 50/60Hz Current, maximum: 2.3A Temperature, operating: 0° to 40°C (32° to 104°F) Temperature, storage: –45° to 65°C (–49° to 149°F) Humidity (non-condensing): 10% to 90% Altitude: less than 2000 m Weight: 15 lb. (6.8 kg) Dimensions (W x H x L): 7 x 7 x 11.5 in. (178 x 178 x 292 mm) Comes with a Cole Parmer Masterflex Easy-Load II L/S Head Pump 77201-60. Pump specification: Material: Rotor/stainless steel (SUS303), Case/PPS (Polyphenylene sulfide) Specifications: Pump series: L/S Number of channels: 1 Max flow rate: 2900 mL/min Min flow rate: 0.034 mL/min Max flow rate per channel: 2900 mL/min Min flow rate per channel: 0.034 mL/min Volume per revolution with L/S 13 tubing: 0.06 mL Volume per revolution with L/S 14 tubing: 0.21 mL Volume per revolution with L/S 16 tubing: 0.8 mL Volume per revolution with L/S 25 tubing: 1.7 mL Volume per revolution with L/S 17 tubing: 2.8 mL Volume per revolution with L/S 18 tubing: 3.8 mL Compatible tube No.: L/S13, 14, 16, 25, 17, 18 Good working condition. Please check out our other listings as well.

Condition: used, Temperature: Ambient to 85Deg C Dimensions: W32 x H30 x D35 cm Njdpfx Aexx Ndasmyewi We have 2 units in stock! Good working condition. Please check out our other listings as well.

Condition: used, This listing is for a Techne Dri-Block heater with sample concentrator Nwjdpfsxzg Syjx Amysi

Condition: used, This listing is for a Techne Dri-block DB3 Heat Block . The unit is in full working condition and is ready for immediate release. The Techne Dri-Block Heater DB-3 is a highly efficient laboratory-grade heating device designed to offer precise temperature control for a variety of applications. Its robust features make it ideal for researchers and laboratory personnel seeking reliable heating solutions. Key Features: Temperature Range: The Dri-Block Heater DB-3 operates within a range from ambient temperature to 100°C (32°F to 212°F), accommodating a wide variety of heating needs. Fast Heat-Up Rate: The device can heat from 30°C to 100°C in approximately 15 minutes, reducing waiting time and increasing efficiency in laboratory workflows. Temperature Stability: It boasts impressive stability specifications, with a temperature accuracy of ±0.1°C at 40°C and ±0.15°C at 100°C. This precision is critical for experiments requiring exact temperature conditions. Temperature Setting: The user-friendly interface consists of three push-button controls paired with a 4-digit LED display, allowing users to set temperatures with a 0.1°C resolution for fine-tuning. Max Temperature Variation: Designed for uniform heating, the maximum temperature variation is limited to 0.2°C between blocks at 40°C, ensuring consistent results across different samples. Number of Blocks: The Dri-Block Heater can accommodate up to three aluminium alloy insert blocks, enabling simultaneous heating of multiple samples or different types of samples. Overall Size: The compact dimensions of the DB-3 are 279 x 260 x 105 mm (L x W x H), making it suitable for space-constrained laboratory environments while still providing ample heating capacity. Applications: The Techne Dri-Block Heater DB-3 is versatile and can be used for a range of laboratory and research applications, including: Incubation: Ideal for incubating biological samples under controlled temperatures. Boiling: Suitable for processes requiring boiling solutions efficiently. Inactivation: Useful for inactivating enzymes or pathogens in samples. Wet Ashing: A useful tool in sample preparation for elemental analysis. Sample Concentration: Facilitates concentrating samples by gentle heating. Enzyme Analysis: Maintains specific temperature conditions for enzyme studies. Nwodsxxz N Iepfx Amyei Nucleic Acid Hybridizations: Supports temperature-controlled hybridization necessary for nucleic acid experiments. Key Benefits: Precise Temperature Control: The high degree of control and stability ensures reliable results. Fast Heat-Up Rate: Saves time in laboratory procedures, enhancing productivity. High Temperature Stability: Reduces variability in experimental conditions, leading to more accurate outcomes. Lightweight and Compact Design: Fits conveniently in various lab settings, preserving valuable workspace. Accepts Multiple Insert Blocks: Increases versatility by allowing customization based on specific protocols or sample types.

Condition: like new (used), Socolest DAS 200 twin-shaft multiblade feeding and receiving table - Made in Italy - centering feeding table - discharge receiving table - top drawing rollers TECHNICAL PARAMETERS: - cutting height 200 mm - cutting width 400 mm - engine power 2 x 55 kW - track width 630 mm - disc diameter max 350 mm - feed speed 40 m / min - hydraulic roller height adjustment - hydraulic cutting height adjustment - hydraulic feed - four top pulling rollers - four rows of anti-rejection latches - shaft diameter 70 mm - sleeve diameter 90 mm - pneumatic side pressure centering - diameter of ferrules 2 x 250 mm - minimum workpiece length 720 mm - laser - feeding table belt 5700 mm - width of table 600 mm - top roller pneumatic pressure roller - speed of table regulated on inverter - receiving table 9200 mm - width of rollers 800 mm - diameter of rollers 135 mm - four drop chains - distance between chains 1900 mm Transport dimensions 1300 cm x 240 cm x 200 cm weight 8 t Njdpfjqup Ansx Amyowi

Condition: excellent (used), The Colechester Bantem 1600 is a small compact lathe. It was mainly used in the educational sector providing training for its safe use to students. It was a well maintained machine, will little use and as a result has little or no backlash in its carriage's. It comes complete with 3 & 4 Jaw chucks, faceplates, and a set of gears for expanding the speed range of its spindle. It also has a range of tool holders and cutting tools. It has an integrated cabinet of the safe storage and easy access for its accessories. Nsdozmhmvjpfx Amyswi This machine is a strong, sturdy and compact machine and is suitable for may applications.

Condition: good (used), Gear motor, electric motor, electric gear motor -Speed: 5 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: 25 mm Nwsdpfx Amecwl A Teyei -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 570/160/H215 mm -Weight: 18.2 kg

Condition: ready for operation (used), The machine is in perfect working condition. Demonstration on site or live video demonstration is possible. Njdpev Uabfefx Amyswi

Condition: excellent (used), Max material height 120 mm Nedsxciypopfx Amyswi Max material width 700 mm 22 kW motor Two floating saws Hydraulic roller feed, steplessly adjustable

Year of construction: 2004, condition: ready for operation (used), A high-temperature rolling machine for glass fiber reinforced compounds is available. 1) Large roller Comerio Ercole, year of construction: 1970, working width: 1500mm, roller diameter: 600mm, roller gap: electrically adjustable, lubrication: circulating oil lubrication. 2) Small roller Meccaniche Moderne, year of construction: 1966, working width: 800mm, roller diameter: 400mm, lubrication: circulating oil lubrication. 3) Horizontal mixer, volume: 2.5m³. 4) Big bag frame with crane. 5) 2x gravimetric dosing scales with control. 6) Conveyor belts and spiral balancing conveyor. 7) Condux HM 45/60 LA hammer mill (lined) with a 1000 mm vibrating screen. 8) 2x Lauda heaters. Including cement mixer, bucket elevator, silo, bagging scales, glass feed rack and a control cabinet for overall plant control. Documentation available. On-site inspection is possible. Nwodpfx Amswk Nldoyoi

Condition: good (used), mileage: 91,245 km, power: 96 kW (130.52 HP), first registration: 09/2022, fuel type: diesel, tire size: 215/65R16, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro6, Year of construction: 2022, Equipment: air conditioning, trailer coupling, = Additional Options and Accessories = - Manual = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 1899 kg, Gross vehicle weight: 3070 kg, Tow hitch, Air conditioning, Parking assistance: Front and rear, Engine power: 96 kW (129 Hp), Euro: 6, Power steering, Starter battery, Body type: extended, Seat adjustment: Manual, 2.0DCI | L2H1 | LED | Airco | Cruise Control | Seat heating | Camera | Tow bar | EURO6 = Further Information = Axle configuration Tire size: 215/65R16 Nsdjzhtw Aspfx Amyowi Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 7 mm; Tire tread depth right: 8 mm Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 4 mm Weights Unladen weight: 1,899 kg Payload: 1,171 kg GVW: 3,070 kg Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: 308 € per month (delivery van, 72 months); Inquire about further information and conditions Identification Registration number: KLEYN1

Condition: used, machine/vehicle number: 7033, Year of construction: 1984, operating hours: 21,102 h, 20.000 kg Antrieb. Diesel 4x4 max. Traglast. 20.000 kg bei 3 m, 1.700 kg Traglast bei max. Ausladung 18 m, Gesamtmasse des Kranes 22.400 kg, Transportabmessungen 10,86 m x 2,50 x 4,0 m Drehbereich 360°, Radformel 4x4, Hydraulische Federung Hubraum 6086 cm³, Leistung. 89 kW (121 PS) bei 2500 U/min Motor. 6-Zylinder Deutz Dieselmotor, wassergekühlt Getriebe. 4- Stufen- Automatik- Getriebe Bereifung. 385/95R 24, Profil vorn 21 mm, hinten 18mm ID 7033 Nähere Daten und weitere Bilder gern auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben. Traglast. 20.000 kg Antrieb. Diesel 4x4 max. Traglast. 20.000 kg bei 3 m, 1.700 kg Traglast bei max. Ausladung 18 m, Gesamtmasse des Kranes 22.400 kg, Transportabmessungen 10,86 m x 2,50 x 4,0 m Drehbereich 360°, Radformel 4x4, Hydraulische Federung Hubraum 6086 cm³, Leistung. 89 kW (121 PS) bei 2500 U/min Motor. 6-Zylinder Deutz Dieselmotor, wassergekühlt Getriebe. 4- Stufen- Automatik- Getriebe Bereifung. 385/95R 24, Profil vorn 21 mm, hinten 18mm Nsdpfx Ajzcbmiemyjwi ID 7033 Nähere Daten und weitere Bilder gern auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben.

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). OilQuick OQ70-55 Adapter Plate / Bolt-on Adapter / NEW / in stock & immediately available Price: €4,190.00 net / €4,986.10 gross A drawing of the hole pattern is available in the photos. - 2x 1/2" coupling - 2x 3/4" Poly couplings - 2x 1" coupling - Also available from stock with leak oil line coupling! Additional charge: €440.00 net - Excavator class: 18 to 32 tons - Weight: 302 kg Suitable for many attachments such as hydraulic breakers, sorting grabs, and also for the following Westtech products: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 Nwedpfx Aeyl Hgyomysi - Westtech CS610 compact (requires leak oil line) - Westtech CS580 (requires leak oil line) - Westtech CS780 (requires leak oil line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All matching Westtech products are also in stock and immediately available! We have many more OilQuick adapter plates in stock for immediate delivery! Mr. Herden (phone ...) will be happy to assist you. Financing offers available on request. We are official sales and service partners of: - OilQuick - Holp - Gierking GMT - Weber MT - Westtech - DMS - Seppi M. - Magni Telescopic Handlers - JCB Construction Machinery - Mercedes-Benz - Iveco With 800 used commercial vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete OilQuick range! Errors and prior sale excepted! = Additional Information = Application: Construction Please contact Marius Herden for more information.

Year of construction: 2021, condition: used, General information Year of manufacture: 2021 New: No Registration number: 41-WBB-3 Serial number: 200210463 Drivetrain Drive: Wheel Make of engine: Kubota Fuel tank: 110 litres Weights Empty weight: 985 kg Functional Extendable superstructure: Yes CE mark: yes Nodpfx Amjylyfcoyewi Condition General condition: very good Technical condition: very good Visual appearance: very good Trime X-ECO LED Light Pole Year of construction: 2021 Engine: Kubota Lamps: 6x 160W LED Height: 8.5m Weight: 985kg Dimensions: 254x139x242cm Very neat machine, two available. Dutch registration.

Year of construction: 2022, condition: as good as new (ex-display), functionality: fully functional, For sale is a FTIR spectrometer - NICOLET IS20 MID-IR DTGS spectrometer which was used for one year as part of a research project. Operation in laboratory environment; no damage; Scope of sale: 1x NICOLET IS20 MID-IR DTGS spectrometer 1x IS20 German device labeling 1x European Schuko plug, 250V 1x ATR ITX BASE 1x AR diamond crystal for Smart iTX ATR 1x COMP-U-16 Upgrade from monitor 20" to monitor 24" 1x iS10-iS20 TRANSMISSION ACCESSORY 1x ST JAPAN ATR-FTIR POLYMER BUNDLE 1x DELL OPTIPLEX 3090 MT - I3-10105 8GB NP: € 31.998.,77 Sale EXW, tel que Nwsdpfx Amjrklx Isyoi

Condition: used, Number of filters 50 St. ventilator 11 kW Fan 2 3 kW Briquette ~ 60 x 40 mm Press 4,5 kW Frequez-controlled extraction system Höcker Polytechnik with briquetting press RSN type ECO 40/12 for extracting chips and sanding dust from a small to medium-sized joinery or other woodworking shop with connected bunker and briquetting press. Including heat recovery and several extraction pipes with pneumatic slides to equip a company with approx. 5-10 machines. Nsdpfx Amjy Nn A Sjyswi

Condition: ready for operation (used), Year of construction: 2007, total height: 2,450 mm, travel distance X-axis: 3,090 mm, travel distance Y-axis: 1,540 mm, overall weight: 8,400 kg, table width: 3,000 mm, table length: 1,500 mm, controller manufacturer: FANUC, controller model: FANUC 16I-PB, This TECHNOLOGY Tecnotransfer 1500x3000 was manufactured in 2007. A robust CNC punching machine, it offers precision and efficiency for your metalworking needs. If you are looking to get high-quality punching capabilities, consider the TECHNOLOGY Tecnotransfer 1500x3000 machine we have for sale. Contact us for more information. Additional equipment • Integrated Auto-Index system • Automatic tool change system with 15 stations • Waste extraction system at the die • Pedal for opening/closing sheet clamps • Pedal for single punching operation • Automatic collision prevention for tilting parts and cutouts • Interactive CAD with export function • Import of CAD drawings in common formats • Interactive nesting (freehand, bump nesting) • Automatic positioning of special tools Machine Benefits Qualitative Machine Benefits Nwodpfx Aszn Hk Nemyoi • Maximum punching diameter with technology tools: 100 mm • Maximum punching diameter with trumpf tools: 80 mm • Maximum punching and nibbling thickness: 6 mm • Automatic tool sharpening recovery: 10 mm • Tool change time: 4 seconds • Automatic sheet metal processing, including residual grid destruction Technical Machine Benefits • Workpiece repositioning: automatic • C-frame structure: c-frame (schwanenhals) • Operating manuals included • Technical support available • Processable sheets with automatic repositioning: 1500 x 6000 mm • Steel and ball plates for sheet metal support • Front horizontal plane for sheet metal unloading • Number of stored stations: 15 • Number of rotating stations: 15 Extra Information Machine still under power Dimensions Machine Depth 6190 mm