Used Cnc Mill Facing & Centering Machine for sale (68,448)

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h Gijdjy N Du Djpfx An Ret - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Giodpfx Anoquhbgj Rot Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Gijdpfxoutuyij An Rot Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 tons good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 Gjdpfow Ed U Nex An Rjit - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: repair required (used), Year of construction: 1987, For sale is a small milling center of the brand Maho and type 300 C The power supply unit is defective but can be repaired Technical data: YEAR OF MANUFACTURE 1987 Type: MH 300 C CNC control Phillips 432 Table: 550x275 mm Travel x/y/z : 300/350/220 mm SK 40 holder Spindle speed: 20-4000 rpm Main drive: 3.3 kw Rapid traverse: 3 m/min Quill stroke: 50 mm Dimensions: 2000 x 2000 x 2000 mm Gijdpfeir U H Eex An Rst Weight: approx. 1900 kg Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Gjdpfx Aow Nklhjn Rsit Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: excellent (used), Year of construction: 2014, operating hours: 39,000 h, functionality: fully functional, machine/vehicle number: 3325, Model S-191FTL-PRM Ø 50 mm Axis travel Milling vertical axis Z = 200 mm Milling transverse axis Y = 200 mm Milling longitudinal axis X = 410 mm Power / Thrust Z-Y 2.5 kW / 550 daN X 4.5 kW / > 550 daN X-Y-Z Traversing speed: 40 m/min Acceleration: 10 m/s² Resolution X-Y-Z: 0.0001 mm Measuring system: glass scale MAIN SPINDLE C (Horizontal turning axis) Power: 15 kW Torque / peak: 22 / 28 Nm Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Bar capacity: Ø 32 mm (option 50 mm) Turning spindle speed: 72,000°/min Clamping force, turning: 4,900 N at 6 bar B-AXIS SPINDLE INCLINATION (machining) Power: 4.3 kW Torque: 119 / 226 Nm Angular travel: -25° / +115° Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Rotational speed: 36,000°/min Locking torque: 200 Nm MACHINING SPINDLE Power: 8 kW Torque: S1 = 9.5 Nm / S6 = 11.5 Nm Max speed: 30,000 min-1 (option 40,000 min-1) Tool clamping force: 1,000 N Locking torque: mechanical locking with straight toothing Tool holder taper: HSK-40 (A or E) Through-spindle lubrication: 30 to 100 bar (optional) TOOL CHANGER Number of tools: 30 (option 60) Number of indexed tools: all Tool change time: 1.2 sec. Chip-to-chip time: 4.4 sec. Max tool diameter: Ø 40 mm (80 mm if adjacent station empty) Max tool length: 130 mm Max tool weight: 1.5 kg Giedpfx Ajw T Sl Dsn Rjt MISCELLANEOUS Installed power: 25 kVA Operating voltage: 3/N/PE/400V/230V 50 Hz Pneumatics: 6 bar (dry air) CNC CONTROL: Fanuc 31i Screen: 15'' color Keyboard: alphanumeric Control panel features: - 1 key switch for functions - 1 feedrate potentiometer 0–120% - 1 spindle speed potentiometer 50–120% - 1 quick-selection button for machine functions - 1 integrated electronic handwheel CNC Options - Data server with ATA Flash, 1GB memory capacity - J947 1 MB RAM memory - S677 TCPC (tool center point control for 5-axis machining) - S808 Al nano HPCC (Al high precision contour control II) - J930 tool tip radius compensation - J893 coordinate system rotation - J819 Helix (cylindrical) interpolation - J953 memory capacity for 1,000 programs - J828 tapping without compensation chuck - S615 insertion of radii and chamfers - J894 workpiece coordinate system - S993 part setup error - R522 inclined machining plane control with guidance Interfaces - Bumotec-specific programming to minimize collisions - Simplified tool management to prevent input errors - Tool management by threshold value, change according to part count or tool life - Automatic tool setting on machine for easier tool handling - Part counter and production management Y-AXIS (horizontal cross milling axis) Travel: 200 mm Power / thrust: 4.8 kW / 240 daN Resolution: 0.0001 mm Max travel, V1: 50 m/min Max travel, V2: 20 m/min Measuring system: glass scale Z-AXIS (horizontal longitudinal milling axis) Travel: 400 mm Resolution: 0.0001 mm Max travel, V1: 50 m/min Max travel, V2: 20 m/min Measuring system: glass scale Includes 8kW cooling unit Emergency braking system integrated Subject to errors and omissions, technical specifications are provided without obligation.

Condition: excellent (used), Year of construction: 2015, operating hours: 11,100 h, functionality: fully functional, machine/vehicle number: NTX1150102, Year 2015 with F31iB5 control and CELOS Country of manufacture: JP Voltage: 380V/50Hz/3ph Dimensions: 4169x2543x2543 mm Net machine weight: 10,000 kg TECHNICAL SPECIFICATIONS Control: Fanuc F31iB5 with CELOS Main spindle: X1 axis: 455 mm Y axis: +/- 105 mm Z1 axis: 800 mm (+165 for ATC) Giedpfxsw T Snfo An Rot B axis: 240° Turret 2: X2 axis: 160 mm Z2 axis: 730 mm Spindle 1 / Spindle 2: C axis: 360° / 360° Tailstock: A axis: 820 mm Max. distance between centres: 1,050 mm Max. turning diameter Main spindle: Ø 430 mm Turret 2: Ø 274 mm Max. turning length: 800 mm Bar diameter: Ø 52 mm . Ø 65 mm Unless otherwise specified or in case of errors or omissions, the technical data is provided without commitment.

Condition: excellent (used), Year of construction: 2020, operating hours: 4,800 h, functionality: fully functional, machine/vehicle number: NL154200702, Manufacturing origin: JP Voltage: 380 V / 50 Hz / 3-phase Net weight: 5,400 kg Customs tariff number: 8458.9100 TECHNICAL DATA Maximum turning diameter: 350 mm Turning length: 515 mm CNC control: M730UM MAPPS Celos Swing over bed: 923.8 mm Swing diameter above carriage: 755 mm Standard turning diameter: 260 mm Bar capacity: 34 mm Main spindle: Spindle speed range: 100 – 8,000 rpm Spindle motor power: 11 / 7.5 kW C-axis resolution: 0.001° Chuck diameter: 210 mm Subspindle: Maximum speed: 8,000 rpm Spindle nose: A2-5 Axis travels: X-axis travel: 260 mm Z-axis travel: 580 mm Y-axis travel: 100 mm (±50 mm) Turret: Number of turret stations: 20 Driven stations: 20 Tool shank diameter: 25 mm Maximum driven tool speed: 10,000 rpm Driven tool motor power: 5.5 / 3.7 kW Feed rates: Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse subspindle: 30 m/min Rapid traverse Y-axis: 10 m/min Gjdpow T Sn Eofx An Roit Rapid traverse C-axis: 400 rpm Total power requirement: 31 kVA Approximate machine weight: 5.4 t Approximate machine dimensions: 4.0 x 3.0 x 3.2 m Errors and omissions excepted – data provided without obligation.

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Gedpfx Anstrhq Hs Reit Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Godpfx Ajt Ac Efsn Reit Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, controller model: Fanuc 32iTB iHMI, counter spindle speed (max.): 4,500 rpm, CMZ Turning and Milling Center including GL20II Gantry Loader! TECHNICAL DETAILS Swing diameter over bed: 760 mm Swing diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Center distance: 689 mm Distance chuck to chuck: 625 mm X-axis travel: 310 mm Z-axis travel: 640 mm Y-axis travel: +70/-50 mm B-axis travel: 640 mm Rapid traverse (X/Y/Z/B): 30/30/15/30 m/min Maximum spindle speed: 3,500 rpm, ASA 8" A2 Maximum sub-spindle speed: 4,500 rpm, ASA 6" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar capacity: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Control: Fanuc 32iTB iHMI Dimensions & Weight Gijdpsy Hk Niofx An Ret Machine weight: 6,500 kg Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm EQUIPMENT Gantry loader

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm,

Condition: repair required (used), Year of construction: 2014, machine/vehicle number: AA2/002546, number of slots in tool magazine: 24, overall weight: 6,600 kg, table length: 5,200 mm, table width: 1,300 mm, TECHNICAL DETAILS Table length: 5,200 mm Table width: 1,300 mm Gsdpfxey Nybtj An Rsit Number of milling spindles: 1 Type of milling table: Beam table Tool changer positions: 24 MACHINE DETAILS Voltage: 400 V Current consumption: 64 A Dimensions & Weight Dimensions (L x W x H): 10,300 x 2,450 x 2,800 mm Net weight: 6,600 kg Transport packages: 1 EQUIPMENT Drilling tool Vacuum pump Tools Becker Vtlf 250 vacuum pump: - Year of manufacture: 2008 - Main motor power: 5.5 kW - Connection diameter: 70 mm - Oil-free: Yes Note: The machine requires repair. There is an issue with the CAN bus system.

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 89867, functionality: fully functional, travel distance X-axis: 3,765 mm, travel distance Y-axis: 1,875 mm, travel distance Z-axis: 324 mm, number of slots in tool magazine: 12, overall weight: 4,000 kg, TECHNICAL DETAILS Working area X-axis: 3,765 mm Working area Y-axis: 1,875 mm Working area Z-axis: 324 mm Table length: 3,600 mm Table width: 1,800 mm Tool holding system: HSK-F63 Tool changer positions: 12 positions MACHINE DETAILS Number of milling spindles: 1 piece Weight: 4,000 kg Transport packages: 1 piece EQUIPMENT Flat table Giodpoy Nxybsfx An Rjt BiesseWorks system/software Safety mat Drilling tool included Saw unit included Labelling machine Loading system Unloading system

Condition: ready for operation (used), Year of construction: 2006, operating hours: 19,067 h, functionality: fully functional, machine/vehicle number: 122616, travel distance X-axis: 500 mm, travel distance Y-axis: 95 mm, travel distance Z-axis: 1,650 mm, controller model: OKUMA OSP P200L, center width: 1,500 mm, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 95 mm Travel Z-axis: 1,650 mm Turning diameter over bed: 550 mm Power: 22.0 kW Distance between centers: 1,500 mm Spindle bore: 80 mm Counter spindle speed: 4,500 rpm Tool magazine: 44 positions Tool holder: HSK-F63 Gjdpfx Aey Rxpron Roit MACHINE DETAILS Control: OKUMA OSP P200L Dimensions & Weight Dimensions (L x W x H): 5,100 x 2,800 x 2,900 mm Transport weight: 13,700 kg Shipping packages: 7 units Operating hours: 19,067 h EQUIPMENT Automatic workpiece feeder with controlled arm by Pneumotec Automatic bar feeder by LNS Quick Load Servo III Counter spindle VAC-MB11 Milling head with automatic tool changer Turning turret: 12-position tool changer Chip conveyor Turret head Driven tools Bar loader Three-jaw chuck Tool magazine C-axis Documentation CE marking

Condition: used, Year of construction: 2018, x-travel 750 mm y-travel 660 mm z-travel 650 mm Control Siemens spindle tunring speed 12.000 U/min tool taper HSK 63 The machine was used for machining aluminum and, in our assessment, is in good used condition. It can be inspected under power by appointment. Technical features & accessories: - Twin spindle - 5-axis Giodpeyrt A Ijfx An Rjt - Pallet changer Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 700 mm z-travel 500 mm A-axis 240 (-120/+120) ° C-Axis 360 ° Giedjxq R E Nepfx An Ret control Siemens 840 D faceplate diameter 440 mm T-slot - width 14 mm T-slot - distance 75 mm max. table load 400 kg max. turning speeds 20.000 min/-1 tool taper HSK 63 A workpiece length 330 mm tool diameter 125 mm change-time chip to chip 4,5 sec weight of the machine ca. 10,5 t dimensions of the machine ca. 2,5 x 5,2 x 3,5 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories: - Kuka KR200-3 comp Robot Three identical machines are available. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: excellent (used), Year of construction: 2009, MAZAK Quick Turn Nexus 100-II M Mazatrol Matrix Nexus control C-axis with driven tools 6-inch chuck Kitagawa BB206 Spindle bore 51 mm Max turning diameter 280 mm Z-axis 385 mm X-axis 185 mm Max spindle speed 6000 rpm Max driven tool speed 4500 rpm 12-position turret Programmable tailstock Tool probe Parts catcher with the machine: - 4 driven tools (2 left, 2 right) Gijdoyhh Drspfx An Rst - 8 standard tool holders - chip conveyor - documentation Operating hours: 3180 hours

Condition: excellent (used), Year of construction: 2008, 2-axis CNC lathe MAZAK QTN 100II Mazatrol Matrix Kitagawa BB206 chuck Spindle bore 51mm Turning length 310mm Turning diameter 280mm X-190mm Z-330mm Max spindle speed 6000 rpm 12-position turret Tool probe Tailstock Godpfeyvzwvox An Roit Included with the machine: -coolant tank with pump -documentation

Condition: not inspected (used), Year of construction: 2003, ● Delivery terms: Free on truck (FOT) ● Location: 42855 Remscheid ● Availability: By arrangement ● Payment terms: Advance payment by bank transfer ● Internal number: KL3 ● Collection: Collection of the machine is scheduled for calendar week 22. The exact pickup date will be coordinated and specified by us. Technical specifications: Working area / axes: Table working area (X): 2,000 mm Table working area (Y): 760 mm X-axis travel: 1,740 mm Y-axis travel: 760 mm (+250 mm for ATC) Z-axis travel: 660 mm Distance spindle nose to table surface: min. 180 / max. 840 mm Distance spindle center to column front: 808 mm Table: Table size: 2,000 x 760 mm Max. table load: 9,810 N (1,000 kg) T-slots: 5 pcs T-slot width: 18 mm T-slot spacing: 125 mm Distance machine base to table surface: 825 mm Max. table capacity: 13,730 N (1,400 kg) Spindle: Speed range: 40 – 12,000 rpm Feed: Rapid traverse: 36,000 mm/min Cutting feedrate: 1 – 8,000 mm/min Scope of delivery: ● Existing manuals (completeness not guaranteed) Note: The clamping devices and vises visible on the machine are not included in the scope of delivery. The tool in the spindle is also not included. Any external machine accessories shown around the machine are also not part of the delivery. Dimensions & weights: ● Installation dimensions L x W x H (approx.): 5,500 x 3,450 x 3,005 mm ● Weight (approx.): 11,500 kg Additional notes: ► Transport to the destination can be offered upon request ► The quoted price is net, plus VAT ► The item is sold excluding any warranty ► Technical data not guaranteed ► Subject to prior sale ❗ Sale exclusively to business customers ❗ Gsdey R Swpjpfx An Rjit

Condition: not inspected (used), Year of construction: 2006, machine/vehicle number: 182926, ● Delivery terms: Free loaded on truck ● Location: 42855 Remscheid ● Availability: By arrangement ● Payment terms: Advance payment by bank transfer ● Internal No.: KL2 ● Collection: The collection of the machine is scheduled for calendar week 22. The exact collection date will be coordinated and specified by us. Technical Data: Working Range / Axes: Table working area (right/left): 2,000 mm Table working area (front/back): 760 mm X-axis (saddle travel): 1,740 mm Y-axis (column travel): 760 mm (+250 mm for ATC) Z-axis (spindle head): 660 mm Distance spindle end to table surface: 180 – 840 mm Distance spindle center to column front: 808 mm Table: Table size: 2,000 x 760 mm T-slots: 5 units T-slot width: 18 mm T-slot spacing: 125 mm Max. table load: 1,400 kg Distance machine base to table surface: 825 mm Spindle: Spindle mount: 7/24 taper, No. 40 Speed range: 40 – 12,000 rpm Feed: Rapid traverse: 36,000 mm/min Cutting feed: 1 – 8,000 mm/min Tool Magazine: Tool positions: 30 Scope of supply: ● Existing manuals (completeness not guaranteed) Gijdoy R Suzjpfx An Rjt Dimensions & Weights: ● Installation dimensions L x W x H approx.: 5000 x 3450 x 3300 mm ● Weight approx.: 11,500 kg Additional Information: ►Transport to the destination can be offered upon request ►Offer price is net plus VAT ►The goods are sold excluding any warranty ►Technical data subject to change ►Subject to prior sale ❗The sale is exclusively to business customers❗

Condition: new, Year of construction: 2023, 1050 mm 600 mm 600 mm 1200x600 mm Gsdpfewp Tf Ssx An Rsit ISO 40 10.000 U/min

Condition: new, Year of construction: 2023, 1050 mm 600 mm Gijdpfx Aswp Tb Tsn Ret 600 mm 1200x600 mm ISO 40 12.000 U/min Motor Capacity 7,0/10,5 kW

Condition: new, Year of construction: 2026, 1100 mm 650 mm Godpfx Anex Urtxj Rsit 610 mm 1200x6000 mm BBT 40 12.000 U/min Motor Capacity 7,5/11 kW max. table load 1300 kg