Used Climaveneta Necs/Q/B 0904 for sale (40,866)

Condition: used, Year of construction: 2010, functionality: unexamined, machine/vehicle number: 32003375, type of input current: three-phase, type of cooling: air, overall weight: 2,320 kg, input voltage: 400 V, total width: 2,220 mm, total length: 4,110 mm, total height: 2,150 mm, input frequency: 50 Hz, Climaveneta NECS/Q/B 0904 multi-purpose unit, air-to-water, air-cooled condenser, for simultaneous chilled and hot water production in a 4-pipe system. Year of manufacture: 2010. Serial number: 32003375. Cooling capacity: approximately 211 kW. Heating capacity: 234.2 kW. Power consumption in cooling mode: 85.23 kW; maximum electrical power as indicated in the documentation: 107.8 kW. Four scroll compressors, two refrigeration circuits, R410A refrigerant (charge indicated on the nameplate: 2 × 35 kg). Power supply: 400 V, three-phase, 50 Hz. Approximate dimensions (L × W × H): 4,110 × 2,220 × 2,150 mm. Weight as indicated on the nameplate: 2,320 kg. Exact operating hours not recorded. Kodsz Hqrlopfx Ahbjdu Condition: used equipment, already disassembled and stored in Covelas, Trofa. It was operational before disassembly, but without reaching full capacity and requiring maintenance. In circuit 1, an internal leak was identified in the expansion valve and an abnormal noise in the four-way valve. In circuit 2, the suction transducer is defective. Under current conditions, it is not possible to perform a load test. Some photographs show the equipment before disassembly; others show its current state in the warehouse. Visits by appointment only. Collection, lifting equipment, loading, and transportation are the responsibility of the buyer.

Condition: new, Year of construction: 2018, functionality: fully functional, type of input current: three-phase, type of cooling: water, overall weight: 1,350 kg, input voltage: 380 V, total width: 2,560 mm, total length: 891 mm, total height: 1,810 mm, Geothermal water chiller by Climaveneta Mitsubishi Electric, water chiller with 233 kW capacity (with heat pump and heat recovery, year 2018, R-410A refrigerant, equipped with 4 scroll compressors, plate heat exchanger, dimensions: 2560x891x1810 mm (height), 1350 kg. New units can be sold individually or as a lot of 5 (brand new, unused units). Kdedpfx Ahsyvu Nfsbsu

Condition: excellent (used), Year of construction: 2018, used horizontal panel dividing saw Manufacturer: Homag Type: Sawteq B-130 (Optimat HPP130/32/32) Year of manufacture: 2018 Cutting length 3200 mm Cutting width (program slider travel) 3100 mm Roller rail 1 * element, 10-track + 4 single-track Clamps 5 pieces Air cushion table 3 * 1800 x 500 Central blower 1 piece Technical data: Saw blade overhang 60 mm Saw carriage feed: forward 1-60 m/min, reverse constant 60 m/min Automatic cutting height; pressure beam height control Kdedpfx Ahez R Sgzjbsu Angular backstop, min. pressure width 0 mm; max. pressure width entire cutting length Main saw motor 5.5 kW with pneumatic saw lift Scoring saw motor 1.1 kW, motorized saw lift, electric adjustment Operating voltage 400 V (+10%/-5%) / 50 Hz Electrical connection value: 10 kW Labeling program with label printer PICA II 103 Power Control CADmatic 4 control system Optimization program CAD-Plan 4 "Single Saw" on the machine

Condition: used, Year of construction: 2022, operating hours: 1,700 h, PIŁA PANELOWA Producent: HOMAG Typ: SAWTEQ B-200 Optimat HPL200/38/22 Rok 2022 Z załadunkiem Kdjdpfx Ajzkmrfohbsu only 1700 working hours !!!!

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 0-250-04-4777, functionality: fully functional, operating hours: 272 h, input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,030 mm, travel distance Y-axis: 1,950 mm, workpiece length (max.): 3,100 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 160 mm, number of axes: 3, number of slots in tool magazine: 14, total height: 2,400 mm, total length: 6,850 mm, total width: 3,616 mm, overall weight: 3,250 kg, table length: 3,100 mm, table width: 1,250 mm, Equipment: documentation/manual, For sale is a 2018 HOMAG CENTATEQ P-110 3-axis CNC machining center, complete with all accessories shown in the pictures, clamping chucks, tools, replacement drive components, and an Extract DUO two-bag dust extraction unit. The machine has seen limited operating hours and has undergone annual brand-name servicing. The machine can be inspected while in operation. The selling price includes professional disassembly and crane loading onto a truck. The organization and costs of transport are the responsibility of the buyer. Primary usage: 272 h Secondary usage: 193 h Total usage: 22891 h Work table: Ksdpfxoz E Rine Ahbedu X = 3100 mm, Front stop Y = 1250 mm, Rear stop Y = 1550 mm, Z = 160 mm Main spindle power: 10 kW Travel speed: X/Y = 60 m/min X = 35 m/min Y = 50 m/min Z = 15 m/min Bumper – safety system EN1760-3 14 tool storage spaces on the moving part, and an additional 8 on the fixed part. Extract Duo dust extraction unit technical specifications: Fan power kW: 5.5 Filter area m2: 36 Filter bag diameter mm: 800 Number of dust bags: 2 Delivered air volume m3/h: 6000

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: P260713249, The HOMAG SAWTEQ B-300 profiLine is a high-performance industrial beam saw designed for the precision cutting of coated and uncoated wood-based panels. Engineered for continuous production environments, it combines robust mechanical construction, high cutting performance, automated material handling, and intelligent digital control to maximize productivity while maintaining exceptional cut quality. Key performance features include a 3,800 mm cutting length, ±0.1 mm/m positioning accuracy, and a powerful 24 kW main saw motor with a 2.2 kW scoring saw, ensuring clean, chip-free cuts even on laminated materials. The saw carriage reaches feed speeds of up to 130 m/min, enabling short cycle times and high daily output. Material handling is highly automated through a 4-ton hydraulic lifting table, dual micro-feeders, automatic loading for thin panels, alignment units, and an optimized pusher system equipped with 11 lifting clamps. Air cushion tables with integrated air nozzles facilitate effortless panel movement while protecting sensitive surfaces from scratches. Kodpfozmglkex Ahbjdu The machine is built around a heavy-duty steel frame with precision rack-and-pinion drives, maintenance-free measuring systems, and a patented central squaring system that reduces cycle times by up to 25% compared with conventional designs. The robust construction ensures long-term dimensional accuracy, minimal vibration, and excellent repeatability. Operation is managed through the PowerControl V2.1 system with a 24-inch Full HD multi-touch display, HOMAG powerTouch interface, CADmatic 5 software, integrated diagnostics, tool management, and network connectivity. The machine is also tapio Ready, enabling future integration with HOMAG's digital production ecosystem and Industry 4.0 services. Additional features such as ecoPlus energy-saving technology, automatic cutting height adjustment, optimized dust extraction, pneumatic saw movements, electric scoring saw adjustment, and remote diagnostics via TeleServiceNet further enhance machine efficiency, reduce operating costs, and simplify maintenance. Overall, the SAWTEQ B-300 profiLine provides an ideal solution for manufacturers seeking high productivity, precision, automation, and digital connectivity in industrial panel processing.

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 08004619608, type of input current: three-phase, overall weight: 240 kg, input voltage: 380 V, input frequency: 50 Hz, A robust strapping machine for safely strapping and stabilizing boxes, packages, and goods with strapping material. Ideal for use in warehouses, production environments, and logistics companies. Kodpjz R Ay Rofx Ahbodu For more information on the technical specifications and the condition of the machine, please contact us.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 9,584 h, pressing force: 153 t, total width: 1,700 mm, total height: 2,820 mm, overall weight: 11,000 kg, controller manufacturer: DELEM, controller model: DA-69T, product length (max.): 3,400 mm, number of axes: 4, This 4-axis PLACKE QPB-4 150/3100 was manufactured in 2001. It features a press force of 1500 kN and a bending length of 3100 mm, making it suitable for various bending applications. The machine includes a mechanical crowning system and comes with a comprehensive set of tooling and accessories. If you are looking to get high-quality bending capabilities, consider the PLACKE QPB-4 150/3100 press brake we have for sale. Contact us for further details. - Control System / Software: Delem DA-69T CNC Control (4 axes)- Operating Hours: 9,584.1 hours- Maximum Operating Pressure: 300 bar- Distance Between Uprights: 2600 mm- Ram Stroke: 215 mm- Installation Height: 525 mm- Throat Depth: 300 mm- Working Height (without table/tools): 900 mm- Rapid Advance Speed: 150 mm/s- Working Speed: 0 - 9.8 mm/s- Return Speed: 100 mm/s- Safety Speed: < 10 mm/s- Stopping Time: 0.15 s- Safety Distance: 270 mm- Ram Dwell Time: 0 - 9.9 s- Drive Power: 11 kW- Total Connected Load: 15 kW- Voltage / Frequency: 400 V / 50 Hz (3 PEN)- Control Voltage: 24 V DC- Current Rating: 30 A- Fuse Protection: 35 A- Hydraulic Tank Capacity: 270 L- Max. Oil Operating Temperature: 80 °C- Oil Filtration on Filling: < 25 µm- Sound Level: < 70 dB(A)- X-Axis Travel Range: 600 mm (Max speed: 400 mm/s, Accuracy: +/- 0.02 mm, Motor torque: 1.9 Nm)- R-Axis Travel Range: 200 mm (Max speed: 200 mm/s, Accuracy: +/- 0.05 mm, Motor torque: 1.9 Nm)- Z1-Z2-Z3-Z4 Axis Adjustment Range: 2400 mm (Manual adjustment)- Crowning System: Mechanical crowning system by Wila (0.6 kW, controlled via CNC)- Tool Clamping / System: Wila Modufix- Operating Ambient Temperature: +5 °C to +40 °C- Operating Humidity: 30% to 95% (non-condensing)- Included Accessories & Tooling:* Foot control panel* Technical documentation (1 set)* Sheet support arms: 2x 1m, 2x 0.5m* Punches (Upper Tools): 5x 515mm (28°, H200); 2x 100mm (28°, H200); 1x 200mm (28°, H200); 1x each 20mm, 30mm, 35mm, 40mm (28°, H200); 2x 100mm (28°, H200 with corner notch); 2x 255mm* Dies (Lower Tools): 5x 515mm (12x30°, R=1, H55); 6x segmented (12x30°, R=1, H55) [Total width 3m]; 4x 515mm; 1x 475mm; 8x segmented [Total width 3m]; 1x 515mm (50x80°, R=5, H55); 1x unspecified; 1x 200mm (V=8, 30°, R=1, H55)* Tool extensions: 1x 1240mm (H140, L410), 2x 50mm (H100), 4x custom-made (H100) Technical Specification Kjdpfszm Unyox Ahbedu Bending Length 3100 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s Kedpfx Aheyw Ndmsbsdu III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: T102H00311, overall weight: 280 kg, type of input current: AC, total width: 700 mm, total length: 2,150 mm, total height: 1,010 mm, input voltage: 230 V, input current: 2 A, Morgana / Plockmatic BM350 brochure production system with SQF500 SquareFolder and FTR500 front trimmer For sale is a complete, fully functional Morgana / Plockmatic brochure production system for the professional production and processing of brochures. The system consists of: - Morgana / Plockmatic BM350 booklet maker / saddle stitch folding unit - 2 saddle stitch heads for flat wire stitching - Morgana / Plockmatic SQF500 SquareFolder - Morgana / Plockmatic FTR500 front trimmer The system enables complete brochure production in a continuous workflow: stitching, folding, spine pressing, and front trimming. The BM350 handles the stitching and folding of the printed sheets. The downstream SQF500 SquareFolder presses the brochure spine, creating a flat, square spine with a high-quality appearance. Subsequently, the FTR500 front trimmer performs a clean front trim of the finished brochure. Technical data and features: - Processing capacity BM350: up to 35 sheets / 140 pages at 80 g/m² - Processing of paper up to 300 g/m² - Paper format min.: approx. 206 × 275 mm - Paper format max.: approx. 320 × 457 mm - Suitable for A4, A3, SRA4, SRA3, and B4, among others - 2 saddle stitch heads - Flat wire stitching - SQF500 SquareFold / spine press module - FTR500 front trimmer - Power supply: 230 V / 50–60 Hz - Dimensions of the fully assembled system: approx. 2,150 × 700 × 1,010 mm - Total weight: approx. 270 kg Year of manufacture / production data: - BM350: 01/2017 - SQF500: 01/2017 - FTR500: 12/2016 Kdodez Nga Eopfx Ahbeu The complete system is therefore offered as a 2017 model year. Condition: used, in good condition, and fully functional. The system can be inspected and demonstrated in operation after prior appointment. Ideally suited for digital printing companies, copy shops, bookbinding companies, in-house printing departments, and companies involved in print finishing, for example, for the production of brochures, magazines, programs, price lists, and similar printed products. The system is preferably sold as a complete, integrated unit. Sale exclusively to businesses and entrepreneurs. The used system is sold in its current condition. The sale is made without any warranty. No guarantee and no returns.

Condition: used, Year of construction: 2012, overall weight: 4,000 kg, input voltage: 400 V, Equipment: documentation/manual, We offer this used MEBA Bio QZ 900 shredding system, manufactured in 2012, for sale. Manufacturer: MEBA Model: Bio QZ 900 Year of manufacture: 2015 Condition: used Kodpfxjz Tfmfe Ahbjdu Category ID: 568 Type ID: 304 Machine type: shredding system, cross-flow shredder The machine was used as a shredder in a biogas plant. However, it can also be used for other shredding applications. If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2010, Equipment: chip conveyor, documentation/manual, Brother TC-32BN QT Year 2010 Brother CNC control X-axis travel: 550 mm Y-axis travel: 400 mm Z-axis travel: 415 mm Rapid traverse: 70 meters per minute Spindle speed: 12,000 rpm Number of tools: 26 Tool holder: HSK 40 Kjdoz S Iddspfx Ahbsdu Chip conveyor Coolant through spindle

Condition: used, Year of construction: 2017, Sieving machine- 2017 Mobile Concept Laser QM Powder With Siemens PLC Powder Handling Unit - Kjdpsz N H Atsfx Ahbedu

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Kjdpfx Ahjx Aqdcebedu Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Used Horizon BQ-270V Perfect Binder Equipment: Perfect Binder Manufacturer Model: Horizon: BQ-270V Year: 2019 Condition: Used Operation Panel Language: English Specifications • Binding Modes: Milling binding / Non-milling binding / Pad binding • Number of Clamps: 1 • Book Block Size: Max. 320 × 320 mm / Min. 135 × 105 mm • Book Block Thickness: 1–50 mm • Cover Size: Max. 320 × 660 mm / Min. 135 × 230 mm Kjdezy Twaspfx Ahbedu • Cover Weight Range: 82–302 gsm • Cycle Speed: Max. 500 cycles per hour • Control Panel: 10.4-inch color touchscreen • Power Supply: 3-phase, 200 V (50 Hz) / 200–220 V (60 Hz), 12.8 A • Automatic Book Thickness Caliper • Quick and Easy Automatic Setup • Fast Size Changeover • Strong, Rigid Nipping and Cover Scoring Stations Description Used Horizon BQ-270V Perfect Binder featuring a user-friendly touchscreen operation and automated setup. Designed for efficient production with accurate binding, quick changeovers, and a maximum binding thickness of 50 mm.

Condition: reconditioned (used), Year of construction: 2018, machine/vehicle number: 0-240-17-5078, PERMANENTLY INTEGRATED FUNCTIONS: 6 grippers 4 tables Right-hand machine Scoring saw motor power: 1.5 kW Saw blade projection: 80 mm Ksdjyg I Tdopfx Ahbodu Saw carriage speed: 130 m/min Main saw motor power: 11 kW Cutting line: 4300 mm Machine table in cutting line with air cushion Infinitely variable pressure beam control Labeling software MACHINE CONTROL: Control panel CADMATIC 5 ADDITIONAL INFORMATION: Data transfer via WLAN-USB Label printer

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Horizon BQ470 PUR, age 2009 only 2.2 million copies made Ksdpoz Thu Eefx Ahbjdu new PUR hose new milling knives LCD GUI Horizon automatic setup Maks. 320 × 320 mm Min. 145 × 105 mm capacity: PUR: max 1 000 C/h | EVA: max 1 350 C/h premelter 20 KG PUR in production excellent condition

Condition: ready for operation (used), Year of construction: 2003, 7-station Theisen & Bonitz gatherer tb sprint B307 VP, equipped with: – 7 stations collator / gatherer Kdsdpfx Ajxnb Hfshbou – stack height up to 30 cm – height control – double sheet control – missing sheet control – including jogging table for solo-gathering / collating Theisen & Bonitz tb sprint 303 QSM stitch- fold- and trimming unit QSM quick set semi automatic size setting version Equipped with 2 Hohner 43/6 stitching heads and delivery belt Technical details Min. open format 6,5 x 15,5 cm Max. open format 35 x 50 cm Max. format booklet 25 x 35 cm Max. format booklet 6,5 x 6,5 Paper weight 18 – 1.000 gsm Max. stitching heads 6 Max. speed 3.300/h for solo gathering – 3.100/h inline with 303 (depending on paper and format)

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² Kdjdpfx Ahezrpu Ssbou no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm speed 5 - 30 m/min power requirement 5,0 kW Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: good (used), Year of construction: 2011, • Wohlenberg WB 92 TS cutting machine • Approx. 920 mm cutting width • Programmable control • Large stainless-steel work tables • Side tables • Waste/trim removal system • Conveyor system • Baumann material handling equipment • Baumann unloading equipment • Baumann jogging equipment • 4 cutting knives included The waste disposal/conveyor equipment is stated to date from approximately 2017. _____ BAUMANN PERIPHERAL EQUIPMENT The cutting system is complemented by professional Baumann handling equipment. Baumann Unit – Type BA 3N According to the machine plate: • Manufacturer: Heinrich Baumann • Type: BA 3N • Machine No.: 1322 • Voltage: 400 V / 3N~ • Frequency: 50 Hz • Rated current: 9 A • Power: 3 kW • Stated load: 1,000 N • Made in Germany The exact year is not shown on the visible nameplate. Unloading Equipment The owner states that the unloading unit is approximately 10 years older than the main cutting machine. Jogging Table The owner states that the Baumann jogging equipment is approximately 20 years older than the main cutting machine. These age indications are based on information supplied by the machine owner and should therefore be considered approximate. _____ INCLUDED TOOLING A particularly useful part of the package is the knife set: 4 x cutting knives included This reduces the buyer's initial need for additional cutting tools and provides spare knife capacity for ongoing production. _____ WHY BUY THIS CUTTING LINE? Complete Production Package Instead of purchasing only a stand-alone guillotine, the buyer receives a complete cutting and material-handling solution with peripheral equipment. Proven German Technology Kdedpfsz Ei D Dex Ahbju Baumann and Wohlenberg equipment is widely used in professional printing and finishing operations and is known for its robust mechanical construction. 920 mm Production Class The 92 cm cutting format is highly versatile and suitable for a wide range of commercial printing, digital printing, bookbinding and finishing applications. Material Handling Included The additional Baumann equipment can significantly improve workflow compared with operating a stand-alone cutting machine. Waste Handling & Conveyors Integrated peripheral systems help reduce manual handling around the cutting process and improve production organization. Four Knives Included _____ SUITABLE APPLICATIONS The system can be used for: • Commercial print finishing • Digital print finishing • Bookbinding • Brochures and catalogues • Sheet cutting • Printed paper • Cardboard and light board applications • Short- and medium-run finishing • General post-press production _____ FGT VALUE – MORE THAN JUST A MACHINE Purchasing used graphic machinery internationally involves more than simply buying equipment. FGT Graphic Machinery can support the complete project from inspection through delivery. Our services can include: • Technical machine evaluation • Inspection coordination • Machine demonstration • Professional dismantling • Preparation for transport • Packing • Loading • International truck transport • Sea freight • Export documentation • Customs preparation • Installation coordination • Technical support _____

Condition: excellent (used), Year of construction: 2020, Ref:11144. 2020 Horizon BQ-480 EVA Late model perfect binder in excellent condition. Perfect binder designed for operation by one person with moveable touch-screen control panel for easy set-up. Customised set-up accounting for paper type, signature or loose sheet, sewn book blocks, notch binding, etc. Comprising: BQ-480 binder with hand feed station and 4 clamps Height adjustable LCD colour touchscreen for full automation of the following areas: • Main clamp book width • Milling head • Spine glue length Ksdpfjz Aklaox Ahbedu • Cover size & scoring • Cover nipping unit • Book delivery width Milling & roughing unit with dust bag extraction EVA hotmelt roller type spine gluing tank EVA hotmelt side gluing discs with glue length cut-off Auto suction cover feeder with scoring and double sheet detection Improved delivery table for gentle handling of thicker or PUR bound books. Including accessories, tools & manuals. Accessories: Auto calliper book measuring device, for quicker make-ready. Specification: Book size, Max: 320 x 320 mm Min: 145 x 105 mm Open cover size, Max: 320 x 670 mm Min: 135 x 225 mm Book thickness : 1 to 65 mm Mechanical speed, Max: 1,350 cycles/hr

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Selling a well maintained batch of machines, all reccent models in great working condition. MABI 3000E EVO (2022) MABI 4QS (2020) MABI 4H (2020) Schwartmanns BM 1 (2021) Schwartmanns RLM 1 (2021) Kdjdpfszbrdpex Ahbju Feel free to contact us with any questions and requests!

Condition: used, machine/vehicle number: 008588, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm Kdjdpfsy In Avex Ahbju No of Grippers: 9 Thin sheet loading: yes

Condition: used, machine/vehicle number: 008589, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Kdodpfx Ajy In Apshbeu Thin sheet loading: yes

Condition: used, Year of construction: 2001, Perfect binder Wohlenberg Quickbinder Year: 2001 Description: - Colour monitor with touch screen - Hand feeding - Number of clamps: 5 - Milling and roughening station - Dust extraction system Kdjdpfx Ahezxzr Nobju - Hotmelt spine glue unit - Cold glue spine glue unit - Hotmelt side glue - Gauzing station - Cover feeder - Scoring station - Nipping and pressing station - Belt delivery