Used Clarifier for sale (126)

Condition: refurbished (used), Year of construction: 1973, functionality: fully functional, rotational speed (min.): 4,800 rpm, Separator WESTFALIA type SB60-06-076 for beer, fruit juices, wine, vegetable juices, tea, coffee, for citrus and tropical fruits for pectin capacity: 300-13.000l per hour with 4,800 rpm Ndjdpfx Astqf Dbjb Ajc Dimensions and weight: Height: 2500 mm Length: 2000 mm Width: 1800 mm Weight: 2350 kg Technical Data: Manufacturer: Westfalia Type: SB60-06-076 Year of construction: 1973 Serial number: 1668 021 Ø dl. 568 mm Drum speed: 4800 rpm Permissible density of the centrifuged material: Heavy liquid: 1.0 kg/ dm3 Solids: 1.45 kg/ dm Test books, tools, drawings available!

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Ndodpfxjzgq Szo Ab Ajc Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation

Condition: used, Year of construction: 1997, functionality: fully functional, GEA Westfalia MSD 140-96-076 Whey Clarifier Year: 1997 Ndsdpfxjzy Rlbo Ab Aoc 22,000L

Year of construction: 2023, operating hours: 1,500 h, condition: excellent (used), functionality: fully functional, Abstracts This is a high-quality system that mixes and homogenizes up to 3 additives in a hot mixer. The control system is included in the scope of supply. First, the material is transported from the production area to a storage silo. From this first silo, the material is fed into the hot mixer, then into the cooler, and finally into a second silo for intermediate storage. After that, there is the option to directly fill the powder onto a big bag filling scale or to compress it into pellets using a pellet press and then fill them. The steel structure is included in the scope of supply. Where necessary, the system is designed according to ATEX standards. In the Documents section, you will find a detailed English and German description of the complete scope of this system. Do not hesitate to call us to discuss and demonstrate the system. A similar system can be inspected in Europe. Main machines: • Mixaco hot mixer HM3000 - 400 kW • Mixaco cooling mixer KM9000 - 90 kW • Steel structure • AZO feeding station and gravimetric dosing for 2 solids and 1 liquid • AZO 2 special dosing scales for difficult-to-flow powders or solids Ndedsztc Nfspfx Ab Aoc • AZO 4 transport line, pressure and vacuum conveying • AZO 2 metrologically verifiable big bag filling stations • AZO control system • Kreyenborg silos ATEX 15 m³ • Kahl pelletizer 37-850 – 132 kW with box cooler and accessories The system was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered at a port or in the production facility in Europe, EXW. The details for optimal transport need to be clarified. The machine price does not include packaging.

Condition: good (used), Hermetic hydro clarifier, complete, tool set, 30 kW motor power, with documentation and overhauled. Price: 35,000 euros. Ndodpfxey Rtlzj Ab Asc

Condition: repair required (used), Year of construction: 2017, functionality: not functional, AS-07251-Alfa Laval Clarifier Module 10 m3/h ALFA-LAVAL PURE SOX (SWPX 810 SGV-34CGL) CLARIFIER MODULE, 316SS. Capacity min. 10,000 L/H Offering 4 identical units INCOMPLETE! Only for spare parts (Machine without bowl) Max. bowl speed 7200 RPM, rated at 10,000 LPH, bowl volume 15 L, sludge capacity 9.4 L, liquid discharged under pressure, solids discharge pump with cyclone tank, 35 kW motor 460/3/60/1728 RPM, Pure SOx scrubber, unitized on a common skid with all valves, piping, control panel, tools, spares, and manual Year of Manufacture 2017 Ndedpjw Ap I Aofx Ab Asc

Condition: repair required (used), Year of construction: 2009, functionality: limited functionality, machine/vehicle number: 305484, saw blade diameter: 450 mm, cutting height (max.): 160 mm, feed length X-axis: 2,000 mm, cutting range round steel at 45°: 150 mm, cutting range round steel at 90°: 150 mm, type of input current: three-phase, cutting range square steel at 45°: 140 mm, cutting range square steel at 90°: 140 mm, CNC cold saw from the renowned brand Kaltenbach, model KKS 401 NA 2000. There is a lot of information to provide, so I have posted several pictures with basic details to give you an overview of the saw's capabilities. It is a rare model with a feeder (single piece) of 0-2000mm, as well as repeat cutting of 2000-9999mm. Automatic zeroing before cutting. CNC saw head with automatic rotation of +/-60 degrees, 2 types of lubrication, emulsion, and direct spray. Option to direct the cut piece to an ejector for small pieces, as well as a chain ejector with a function for lowering longer and heavier pieces. I haven't included this in the pictures as it is not installed, but the saw also comes with a set of protective guards with safety barriers and a large number of spare parts. The complete documentation is original and is linked to the machine's serial number, making installation easy and straightforward. Problem explanation: the saw is connected to the electrical power supply, and each individual function (and there are many) is fully operational. The problem arises during automatic operation; the most likely cause is the program parameters themselves (it uses the Windows platform). I haven't been able to find a suitable programmer who can learn on my machine. Possible solution: I contacted the saw manufacturer, and they directed me to their authorized service provider, so I have their contact information, which I can provide to the future buyer. The estimated cost of repair in Serbia is between 3000-5000 EUR. If you are closer to Germany or the Czech Republic, this cost will be significantly lower. So, there are two price categories: if you buy the machine in its current condition, the price is as advertised. If I resolve the problem, the price will be considerably higher. The advertised price includes professional dismantling and loading onto a truck (a rather important, and not inexpensive, item). Transportation is at the buyer's expense. I hope I have clarified the current condition of the machine. Due to a change in business activities, the saw is surplus to production. Happy shopping! Ndjdpfsyk Inpjx Ab Aec

Condition: like new (used), HERMETIC CLARIFIER. POWER: 7.5 kW. COMPLETE TOOL SET. INSPECTED. DOCUMENTATION AVAILABLE. PRICE: 25,000 EUROS PLUS VAT. Nsdpfsy S Smysx Ab Aedc

Condition: used, Year of construction: 2012, GEA Milk Separator MSE 100-06-177 Year of manufacture: 2012 Maximum permissible drum speed: 7200 rpm Maximum permissible feed density: 1.0 kg/dm³ Heavy liquid: 1.0 kg/dm³ Solids: 1.1 kg/dm³ Min./max. feed temperature: 5/100 °C Nodpfx Abjwayr Te Aedc Max. throughput: 30 m³/h

Condition: ready for operation (used), Two Artinox inclined clarifier/lamella clarifier systems made of stainless steel are offered for the continuous mechanical separation of dirt particles, sludge, or sediments from water or process liquids. 1) Artinox inclined clarifier/lamella clarifier, pipe connection: Ø 108mm, additional connection: Ø 168mm, main module dimensions: approx. 2400mm/1350mm/2360mm, hopper width bottom/top/center: approx. 1323mm/1896mm/1546mm, inclination: approx. 1.1°, function: solid-liquid separation by sedimentation, application: process water, wastewater, wash water, liquids containing settleable solids, separation principle: sedimentation with lamella packs/inclined plates, flow direction: horizontal, lamella packs: available, sedimentation hopper: available, equipped with multiple basin modules, lamella clarifier sections, sludge hopper, upper pipe distributor, connection nozzles and flanges, lifting lugs, frame, maintenance access. 2) Artinox inclined clarifier/lamella clarifier, smaller module dimensions: approx. 2300mm/1250mm/1371mm, hopper height/inclined bottom section: approx. 1050mm, inner/lower hopper dimension: approx. 775mm, lamella/sheet spacing: approx. 293mm, function: separation of settleable solids from liquids, design: rectangular clarification tank with hopper bottom, flow path: via inlet, clarification zone, overflow edge, sludge hopper: available, separate pre-collection tank: available on the side, discharge pipe/flange connection: available, maintenance ladder: available, wooden cover: available, equipped with main clarification tank, hopper bottom, side-mounted attachment tank, pipe connection, flange, maintenance ladder, upper cover. Inspection possible by appointment. Nedpezhb Hfsfx Ab Ajdc

Condition: excellent (used), Year of construction: 2013, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: R1203433 Pos 1000, overall weight: 365 kg, rotor diameter: 400 mm, rotor width: 320 mm, opening width: 340 mm, input voltage: 400 V, power: 22 kW (29.91 HP), A very robust hammer mill from Alpine with grate bars for crushing soft to medium-hard materials. The mill is supplied with an inlet hopper and a device for pneumatic extraction. A control panel is not included. Machine data: 365 kg; 2800 RPM, 22 kW Rotor 400x320 mm, cast iron rotor, inlet 340x150 mm, Design with grate bars 4 rows of hammers, 5 hammers per row Ndodpfx Aszl E N Eeb Ajc The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: used, Year of construction: 2013, operating hours: 3,500 h, machine/vehicle number: 13620, rotor diameter: 395 mm, rotor width: 1,300 mm, input voltage: 400 V, number of blades: 60, rotational speed (max.): 129 rpm, power: 55 kW (74.78 HP), We sell the shredder as a set including a pit conveyor, shredder, and discharge conveyor. The Vecoplan universal shredder – VAZ – can be used for a variety of materials – waste shredding, plastic shredding, wood shredding, etc. The machine, with a power output of 55 kW, is equipped with 60 cutting heads measuring 60x60 mm. A turbo coupling facilitates the start-up process, allowing the machine to be started even with a full hopper. The hopper is made of stainless steel, and the extraction hood is made of galvanized sheet metal. The machine, including the control panel, is offered for sale. The hopper and extraction hood are included. Ndjdpfezmzdusx Ab Aec Spare parts are included in the price of the shredder. The machine was in operation at an R&D center in Israel. Now that the company is operating a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered ex-works at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging for pallet transport.

Condition: used, Year of construction: 1976, Drum speed: 4500/min, drum diameter: 650mm, permissible density of centrifuged material, heavy liquid: 1,1kg/dm³, solids: 1,3kg/dm³, control panel: Siemens SIMATIC HMI. Maintenance was carried out every two years by a specialist company, new control system installed two years ago, very good condition, no maintenance backlog, with documentation. An on-site inspection is possible. Njdszun S Ijpfx Ab Aedc

Year of construction: 2013, operating hours: 3,500 h, condition: used, functionality: fully functional, machine/vehicle number: 12400, TSM/tsi oscillating sieve machines are used for the classification, screening, and dust removal of bulk materials from almost all industrial sectors, such as stones and soils, chemicals, mining, pharmaceuticals, feed, and food. The machine for sale has a diameter of 1200 mm and is equipped with 3 sieve decks with mesh sizes of 3 mm, 1.4 mm, and 0.463 mm. In addition, spare sieves with the following dimensions are included: • 16 mm x 1 piece • 15 mm x 1 piece • 0.5 mm x 1 piece • 0.16 mm x 1 piece • 0.9 mm x 1 piece • 0.86 mm x 1 piece Ndjdpfxszmzbmo Ab Aoc The drive has a power of 1.5 kW, 400 VAC, 50 Hz, 1450 RPM. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 2017.041.XM.400.004, space requirement length: 6,700 mm, space requirement width: 3,200 mm, space requirement height: 5,000 mm, This is a combination of a hot mixer and a cooler. A typical application is mixing polymers with additives. Hot mixer: working volume of 400 liters, drive power 90 kW, mixing impeller with a tip speed of up to 60 m/s. Vacuum system included (but needs optimization). Filling hopper included. Nodpfjzl Td Rox Ab Aodc Gravimetric scales for the additives are not included in the delivery. Cooling mixer, volume 1200 liters with a 11 kW drive, cooling jacket for cold water flushing, outlet with a valve. The combination includes the entire steel structure with walkways, control cabinet with frequency converter (400 VAC/50Hz) for the variable drive of the hot mixer. Additional documents can be provided upon request. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.

Condition: excellent (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: R1253899, overall weight: 2,200 kg, rotor diameter: 500 mm, rotor width: 840 mm, type of input current: three-phase, A very robust cutting mill Machine data: 2200 kg; 1478/562 RPM, 45 kW Rotor 500x840 mm, 5 rows of rotor knives, 4 rows of stator knives Nedozl E Stspfx Ab Asdc Cast iron rotor, inlet 340x150 mm, Sieves with 3-2.5-1 mm 4 rows of hammers with 5 hammers each The delivery scope also includes: Alpine Classifier MZM 160x500, fan 7.5 kW, rotary valve, some piping A control cabinet is not available and must be built by the buyer. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price is quoted excluding packaging on a pallet.

Condition: excellent (used), Year of construction: 2021, operating hours: 240 h, functionality: fully functional, operating pressure: 6 bar, We used the machine for PVC tarpaulins. The company is closing down. Technical details can be found in the photo. It has been running without issues, and no maintenance has been required to date, although this can certainly be clarified with the manufacturer in Italy. The machine functions perfectly; there is no overheating. A video call is possible. Three electrodes are included: one fixed electrode, 100 cm x 20 cm Nedpfx Abezy E D Es Ajdc one fixed electrode, 50 cm x 2 cm one flexible electrode, 100 cm x 2 cm 400 L/minute 200/300 L of air Working pressure: 6 bar, max. 8 bar.

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW Nsdpfx Abjznz Ezs Ajdc • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: used, Year of construction: 2011, operating hours: 8,261 h, Equipment: all wheel drive, Stock No. 5797 Atlas 160 W mobile excavator with additional hydraulics ----* Manufacturer: Atlas * Type: 160W - Mobile excavator * Year of manufacture: 2011 * Power-shift transmission * Color: Orange * Tires: 10.00 - / Twin tires * kW/HP: 105 kW / 143 HP * Deutz engine with 143 HP, water-cooled * 2-shell grab * Total operating hours recorded: approx. 8,261 hours * Hydraulic operating hours recorded: approx. 3,581 hours * Hydraulic connections for hammer and shears * 301-liter diesel tank * 180-liter hydraulic tank * 32-liter AdBlue tank Nsdozwbf Tspfx Ab Aedc * Air conditioning * Adjustable boom * 270-degree camera system * Rotating beacon * Max. km/h * Work lights * Transport dimensions: 7.60m long x 3.15m high x 2.54m wide Note regarding potential errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or the information provided. We assume no liability for errors, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: ready for operation (used), A GEA clarifier (skimmer) is available. Bowl speed: 5920 rpm, material density: 1.1 kg/dm³, production capacity: approx. 10000 l/h, motor power: approx. 18 kW, construction material: stainless steel 316, documentation available. On-site inspection is possible. Nodou S I D Djpfx Ab Ajdc

Condition: used, functionality: fully functional, color channels: CMYK, Weiß, Gloss/Klarlack, Primer, number of print heads: 4, year of last overhaul: 2026, type of input current: AC, input current: 2 A, input voltage: 100 V, Equipment: brochure finisher, documentation/manual, For sale is a Roland VersaUV LEF-300 UV flatbed printer including a BOFA extraction system and a primer configuration. Extensive investment – 4 new original Roland print heads A major advantage of this machine: significant investments have already been made in important components. All 4 print heads have been replaced with new original Roland print heads. In addition, 8 dampers, 4 cap tops, a dust filter, and other maintenance and wear parts have been renewed. A total of €7,227.12 gross was invested in these works, including the four new original print heads, other components, materials, and technician services. The corresponding invoice is available and can, of course, be viewed upon serious interest. Primer configuration Approximately €700 was also invested in reconfiguring the machine for primer application. Instead of a second clear coat/gloss channel, primer is now directly available via the machine. This is particularly interesting for applications where additional surface preparation is required to improve adhesion. The machine is equipped with CMYK/color, white, gloss/clear coat, and primer. BOFA extraction system included The offer also includes a BOFA extraction system. This means that not only the printer itself is offered, but a comprehensively equipped complete package. Inspection & test print possible Especially when purchasing a used professional UV printer, one should be able to personally inspect the machine before buying. Therefore, inspection and test printing on site are expressly possible. The existing invoices and documentation regarding the work carried out and the replacement of the print heads can also be viewed. Njdpfx Abez Eazgo Asdc Why is the printer being sold? I acquired the Roland specifically for my own production and subsequently invested extensively in the machine. However, in practical use, it has become apparent that I need a different production process for my very specific application and my requirements for the final product. Therefore, I am restructuring this production area and selling the Roland. Location & shipping Location of the machine: 3730 Austria Collection and inspection on site are possible. Alternatively, the machine can be shipped throughout the EU by a forwarding agent. The transport costs depend on the respective destination and can be clarified in advance. Price €16,900 net (negotiable) An interesting complete package for commercial enterprises looking for a Roland VersaUV LEF-300 with four already renewed original Roland print heads, a primer configuration, and a BOFA extraction system. Please feel free to contact me if you are seriously interested. Inspection and test printing are possible by appointment. Weight: 144 kg Input voltage: 100–240 V Frequency: 50/60 Hz Current consumption: 2.1 A Number of phases: 1 φ Printing area: 770 × 330 mm Max. workpiece/media size: 800 × 360 mm Max. object height: 100 mm Max. object weight: 8 kg Printing resolution: max. 1,440 dpi

Year of construction: 2017, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 51.I613-020-01, The IFE SORT is a density sorting machine based on the fluidized bed system for fine, dry bulk materials. The function of this air separation table is based on a combination of vibration and air technology. Heavy components are conveyed upwards by vibration, while lighter components are kept suspended by injected air and consequently float downwards. The applications include recycling and secondary raw material processing, as well as the wood, food, and mining industries. Standard version: consists of a basic unit with a perforated plate insert driven by two unbalanced motors and a fan with a motor. Nominal width: 600 mm; sieve aperture 0.6 mm Capacity: up to 3 tons/hour in recycling – however, this is highly dependent on the density and size of the material being processed. Easy adjustment: of impact angle, amplitude, inclination, speeds, etc. Design: dust-tight Control cabinet: is not included; 2 x 500 W unbalanced motors and 1 x 4 kW fan The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered ex works at a port or at the production facility in the Netherlands. Ndodpfjzkup Esx Ab Asc The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Year of construction: 2006, condition: used, machine/vehicle number: AT99, Used Vitone V5 decanter for oil - 90ql MalaxeTechnical Specifications & Performance DataThis second hand decanter centrifuge is an industrial separation unit designed to support upstream processing prior to packaging and bottling operations. Built in 2006, it combines robust performance with straightforward integration to modern process lines. The machine is supplied complete with an electrical control panel and a large-capacity malaxer, enabling efficient preparation and clarification of product before transfer to storage tanks and downstream filling equipment in a used bottling line or new installation.Year of manufacture: 2006Throughput capacity: 50 q/h (approximately 5.0 t/h)Included components: Electrical control panel; malaxer rated at 90 ql (about 9,000 kg)Process type: Continuous solid–liquid separation via horizontal decanter centrifugationOperating configuration: Supplied dismantled for rapid transport and reinstallationApplication: Pre-clarification and separation prior to storage, transfer, and filling in beverage production and industrial packaging workflowsAdvanced Automation & Control SystemsThe unit is delivered complete with an electrical panel that provides centralized control for start/stop sequences, motor protection, and process interlocks. The panel architecture supports safe operation, facilitating integration with plant-level controls, tank level management, and downstream fillers. Clear labeling and organized wiring simplify commissioning and maintenance, while standard protections help safeguard operators and equipment during routine use.Production Line Integration CapabilitiesEngineered for straightforward line connectivity, the decanter centrifuge interfaces easily with upstream feed systems and downstream buffer tanks or clarifiers. Its continuous discharge design helps stabilize flows to filling and packaging equipment, improving overall line efficiency. It can operate as a standalone separation module or be incorporated inline with CIP-ready manifolds, transfer pumps, and automated valves. Flow and residence time can be tuned via feed rate adjustments to accommodate a range of viscosity profiles and solids loads encountered in beverage production and related industrial packaging processes.Machine Condition & Maintenance HistoryThe machine is already dismantled, allowing efficient loading, transport, and rapid placement at the installation site. Mechanical and electrical subsystems are organized for reassembly, with the supplied electrical panel simplifying recommissioning. Overall, it represents a reliable second hand asset ready to be integrated into an existing used bottling line or a new process area following standard installation and start-up procedures.Operational Performance & VersatilityThis decanter centrifuge is designed to deliver stable separation performance across continuous operation, supporting clarification targets that improve downstream filtration and filling quality. The included malaxer enhances upstream mixing and conditioning, optimizing separation efficiency and throughput. Its robust industrial design suits extended duty cycles, while continuous solids dischar... Njdpfx As Adt Dxjb Asdc

Condition: good (used), Year of construction: 1993, Sheet metal storage system, Stopa, 491 storage locations for sheet metal 1.30 x 2.50m and 1.50m x 3m, – used: Price ex works: €65,000 (net), plus dismantling, etc. Manufacturer: Stopa Type: SLBS 3000 UL (Serial No. 93449) Year of manufacture: 1993 / Modifications in 2013 (Retrofit) and 2019 Storage height: 6,400mm Width (without attachments): Overall: 5.26m, Front: 5.17m Length: approx. 60m Sheet metal format Front: 1,300 x 2,500mm Sheet metal format Overall: 1,500 x 3,000mm Load capacity per pallet: 3,000kg Storage locations Front: 359 Storage locations Overall: 132 No existing cassettes: to be clarified 35 towers / bays Storage capacity: 1,473t Over the years, various punching/laser cutting machines have been connected to this storage system, i.e. machines with an interface to the storage system. Manual bending presses and deburring/grinding machines do not have an interface to the storage system. The loading and unloading stations are controlled via the storage management system and moved manually from the storage location to the desired position. 2013 > Retrofit modification: 4.1 Key aspects of this modification: 4.1.2 New main control panel with control computer 4.1.3 Data transmission to the stacker crane (RGB) via data light barrier 4.1.4 Lifting mechanism with two new Profi-Bus rotary encoders for height positioning, which monitor each other. 4.1.5 Encoder of the traverse for the telescopic fork was replaced with a Profibus-compatible rotary encoder 4.1.6 Control cabinet of the RGB was completely renewed 4.1.7 New circuit diagrams for the RGB and the I/O modules were created. 4.1.8 The safety technology was not changed 4.1.9 The speed of the axes (longitudinal travel, lifting mechanism, fork) was not changed. 4.1.10 The drives on the RGB and the controllers in the stationary RGB cabinet were converted to asynchronous servo motors with frequency converters. 5) 2015 > Connection of Trumpf L3030 to our distribution line 2 5.1.1 Key aspects of this modification: 5.1.2 Modification of station 4 and 6, loading and unloading side was swapped 5.1.3 Modification of safety interfaces of station 4 and 6 from 1 to 2-channel 5.1.4 Trumpf L3030 LiftMaster connection 6) 2017 > Order for Retrofit expansion concept, stage 1-3 6.1 Key aspects of expansion stages 1-3 (implemented by 08.2018) 6.1.2 Stage 1: Connection of the new TruLaser 3030 Loadmaster to VT 1 with modification of loading and unloading station 3 (Overall and Front) 6.1.3 Stage 2: Modification of the steel structure blocks from Front to Overall (28, 30, 32, 34, 36), relocation of stations 19 and 20 including update of the station control from Siemens S5 to S7 including 56 flat pallets Overall 6.1.4 Stage 3: Update of the station controls to Siemens S7 without VT1 and VT2 7) 2018 > Order for Retrofit expansion concept, stage 4-5 7.1 Key aspects of expansion stages 4-5 (planned implementation April – June 2019) 7.1.1 Stage 4: 7.1.2 Dismantling of the STOPA storage SBLS tower 1 and tower 2 (in-house work) 7.1.3 Modification of distribution line 1 and 2 7.1.4 New distribution trolley 1 7.1.5 New control for distribution line 1 and 2 7.1.6 Stage 5: 7.1.7 New storage management software STOPA WMS 4.0 DYNAMIC The modification of expansion stages 4 – 5 will be carried out without any significant changes to the system and on the basis of the updated safety measures. Condition: good Available: immediately Location: Germany, NRW Ndjdpfx Abjz Tdywe Aoc PDF plan available – we will gladly send it upon request!

Year of construction: 2017, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 51N292010-01, The IFE SORT is a density sorting machine based on the fluidized bed system for fine, dry bulk materials. The function of this air separation table is based on a combination of vibration and air technology. Heavy components are conveyed upwards by vibration, while lighter components are suspended by injected air and consequently float downwards. The application areas include recycling and secondary raw material processing, as well as the wood, food, and mining industries. Standard version: consists of a basic unit with a perforated plate insert driven by two eccentric motors and a fan with a motor. Nominal width: 1000 mm Capacity: up to 3 tons/hour in recycling – however, this is highly dependent on the density and size of the material being processed. Easy adjustment: of impact angle, oscillation amplitude, inclination, speeds, etc. Design: dust-proof Control cabinet: in an IP 55 housing with a frequency converter for motors and fan, included as standard. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in the Netherlands. Njdpfxezkvaxo Ab Ajdc The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.