Used Chen Hsong Em120-V (2011) for sale (35,400)

Condition: excellent (used), Year of construction: 2011, Machine Name : Chen Hsong EM120-V Year of Manufacture : 2011 Operating Hours : 58,209 Clamping Force (kN) : 1200 Injection Pressure (bar) : 1700 Cylinder Volume (cm³) : 203 Screw Diameter (mm) : 42 Horizontal Platen Size (mm) : 610 Vertical Platen Size (mm) : 560 Pgsdpfx Amow Aw S Ajyop Tie Bar Distance Horizontal (mm) : 410

Condition: excellent (used), Year of construction: 2019, operating hours: 18,800 h, functionality: fully functional, machine/vehicle number: AAKJ4001, clamping force: 12,000 kN, screw diameter: 110 mm, clearance between the columns: 1,250 mm, column diameter: 220 mm, displacement volume: 5,701 cm³, injection pressure: 1,700 bar, injection weight: 5,244 g, mold height (min.): 500 mm, ejector force: 350,000 N, ejector stroke: 350 mm, opening stroke: 1,300 mm, plate length: 2,610 mm, plate width: 1,800 mm, plate height: 1,800 mm, total length: 13,200 mm, total width: 3,400 mm, total height: 3,500 mm, overall weight: 63,000 kg, heating capacity: 55 kW (74.78 HP), pressure: 178 bar, number of injections: 1, pump power: 204,000 W, power: 260 kW (353.50 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 512 A, Equipment: documentation/manual, The machine has been used sparingly and is in very good condition. It has been well-maintained. The machine only processes ABS and PP. The machine’s control system is B&R. The machine is equipped with numerous accessories, including 3 air valves, two hydraulic valves, a servo valve for table movement hydraulics, 22 tool heating zones, a water manifold with 8 zones, screw heater insulation, hydraulic screw rotation for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening, and an electrical cabinet with sockets. The machine also has water blocks on both the moving and stationary tables, each with 8 connections. In addition, several spare parts are included, such as a complete torpedo, a screw nozzle, heaters, temperature sensors, and specific seals for the hydraulics, as well as a self-filtration filter and a torpedo wrench and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not part of this listing, it can be purchased separately and added to the machine later. It was used with the machine and is adapted for it. Pgsdpfxjznbqqe Amysp

Condition: excellent (used), Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: ADKL2001, clamping force: 14,000 kN, screw diameter: 120 mm, clearance between the columns: 1,450 mm, column diameter: 240 mm, displacement volume: 7,351 cm³, injection pressure: 1,200 bar, injection weight: 6,983 g, mold height (min.): 650 mm, ejector force: 350,000 N, ejector stroke: 380 mm, opening stroke: 1,450 mm, plate length: 2,950 mm, plate width: 2,000 mm, plate height: 2,000 mm, total length: 14,100 mm, total width: 3,400 mm, total height: 3,600 mm, overall weight: 75,000 kg, heating capacity: 60 kW (81.58 HP), pressure: 178 bar, number of injections: 1, pump power: 204,000 W, power: 266 kW (361.66 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 520 A, Equipment: documentation/manual, The machine has seen limited use and is in very good condition. It has been well maintained. The machine only processes ABS and PP. It features a Beckhoff control system. The machine is equipped with extensive additional equipment, including 3 pneumatic valves, two hydraulic valves, a servo valve for table movement hydraulics, 32 tool heating zones, a water manifold with 8 zones, a screw heating element insulation, a hydraulic screw rotation system for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Additionally, water blocks are installed on both the moving and stationary tables, each with 8 connections. Furthermore, a set of spare parts is included, such as a complete torpedo, a screw nozzle, heaters, temperature probes, and specific hydraulic seals, as well as a self-filtration filter and a torpedo wrench, and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not the subject of this advertisement, it can be purchased separately and added to the machine. It was used with the machine and is adapted for it. Pjdpfx Aszna T Remysgp

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 88-MK6 with Sepro Industrial Robot Succes 7 / Hybrid Machine Year of manufacture: 2021 Injection unit: Screw diameter: 41 mm Shot weight: 246 g Pgodpszpanwjfx Amysp Injection pressure: 1890 bar Dosing volume: 271 ccm Clamping unit: Clamping force: 128 t Tie bar spacing: 410x410 mm Platen size: 620x605 mm Ejector: electric Clamping unit: toggle Control: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor with inverter drive - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Robot Samfacc Year of manufacture: 2022 4-axis robot: 3 axes are driven with servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 4000 kg Length/Width/Height: 4.90x1.30x1.80 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 128-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 41 mm Shot weight: 246 g Injection pressure: 1890 bar Dosing volume: 271 cc Clamping unit: Clamping force: 128 t Tie bar spacing: 410x410 mm Platen size: 620x605 mm Ejector: electric Clamping unit: toggle Control: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Samfacc robot Year of manufacture: 2022 Pjdpfx Amjzpankoyegp 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 4000 kg Length/Width/Height: 4.90x1.30x1.80 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 208-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 52 mm Shot weight: 502 g Injection pressure: 1893 bar Dosing volume: 552 ccm Clamping unit: Pedozpandjpfx Amysgp Clamping force: 208 t Tie bar spacing: 530x530 mm Platen size: 790x765 mm Ejector: electric Clamping unit: toggle Control system: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine has been serviced in Germany Samfacc robot Year of manufacture: 2022 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt available at an additional cost Dimensions: Weight: 6800 kg Length/Width/Height: 6.10x1.50x2.00 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 468-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 83 mm Shot weight: 2043 g Injection pressure: 1840 bar Dosing volume: 2245 ccm Clamping unit: Clamping force: 468 t Tie bar spacing: 830x830 mm Platen size: 1210x1165 mm Ejector: electric Clamping unit: toggle Control: BECKHOFF - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Control with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy saving Pjdozpamtepfx Amyjgp Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Samfacc robot Year of manufacture: 2022 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt and safety guard Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 19800 kg Length/Width/Height: 8.80x2.00x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2023, operating hours: 4,050 h, functionality: fully functional, machine/vehicle number: AEFM6009, clamping force: 10,000 kN, screw diameter: 110 mm, clearance between the columns: 1,100 mm, column diameter: 180 mm, displacement volume: 4,941 cm³, injection pressure: 1,840 bar, injection weight: 4,546 g, mold height (min.): 450 mm, ejector force: 289,000 N, ejector stroke: 350 mm, opening stroke: 1,200 mm, plate length: 2,350 mm, plate width: 1,570 mm, plate height: 1,570 mm, total length: 11,300 mm, total width: 2,550 mm, total height: 3,400 mm, overall weight: 44,000 kg, heating capacity: 51 kW (69.34 HP), pressure: 178 bar, number of injections: 1, pump power: 136,000 W, power: 195 kW (265.13 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 371 A, Equipment: documentation/manual, The machine has relatively few operating hours and is in very good condition. It has been well-maintained. The machine processes only ABS, PP, and PS. It is controlled by a Beckhoff system. The machine is equipped with extensive additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 24 tool heating zones, a water manifold with 6 zones, a screw heater insulation, hydraulic screw rotation for die replacement, a die with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. In addition, water blocks are fitted to both the moving and stationary tables, each with 8 outlets. Furthermore, a number of spare parts are included with the machine, such as a complete die, a screw die, heaters, temperature sensors, and various seals for the hydraulics, as well as a self-filtration filter, a die wrench, and auxiliary ejector rods. The machine is being sold without the robot shown in the pictures. Pgodpfxeznll Sj Amyjp

Condition: excellent (used), Year of construction: 2021, operating hours: 6,300 h, functionality: fully functional, machine/vehicle number: ADFL9004, clamping force: 80,000 kN, screw diameter: 98 mm, clearance between the columns: 1,020 mm, column diameter: 160 mm, displacement volume: 3,142 cm³, injection pressure: 1,794 bar, injection weight: 2,890 g, mold height (min.): 400 mm, ejector force: 182,000 N, ejector stroke: 280 mm, opening stroke: 1,000 mm, plate length: 2,020 mm, plate width: 1,440 mm, plate height: 1,440 mm, total length: 11,200 mm, total width: 2,400 mm, total height: 3,300 mm, overall weight: 35,000 kg, heating capacity: 39 kW (53.03 HP), pressure: 178 bar, number of injections: 1, pump power: 116,000 W, power: 163 kW (221.62 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 312 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition. It has been well maintained. The machine processes only ABS, PP, and PS. The machine is controlled by a Beckhoff system. The machine is equipped with a variety of additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 8 tool heating zones, a water manifold with 8 zones, a screw heater insulation, hydraulic screw rotation for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Water blocks are also included for both the moving and stationary tables, each with 8 connections. In addition, a number of spare parts are included, such as a complete torpedo, a screw, heaters, temperature sensors, and specific seals for the hydraulics, as well as a self-filtration filter, a torpedo wrench, and auxiliary ejector rods. The machine is sold without the robot shown in the pictures. Pedpfxeznlhme Amyegp

Condition: used, Year of construction: 1963, balancing body min/max. 30 - 5000 kg balancing body diameter with machining unit 2100 distance of bearings kleinster 240 mm dia. axle journal 35 - 180 mm weight of the machine ca. 400 KG Pgedezkbqpepfx Amyjp

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 6V0148, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width in front of faceplate 165mm Bed length between centres 650mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle bore 42mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 100mm Pedpfx Amjwmm H Rsysgp Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution   MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chucks Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Rear splashguard NB Machine ex Dyson apprentice training facility, in excellent condition

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm Pedpfx Amsx Ein Seyjgp - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: good (used), Year of construction: 2011, functionality: fully functional, Offered is a Bizerba FK-32 bone saw band saw, built in 2011. The machine is fully functional. Pgodov Npbqepfx Amyop Further details available upon request. Cash or prepayment! Sale to businesses only. No guarantee or warranty.

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, feed length X-axis: 2,040 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 760 mm, total height: 3,500 mm, total length: 7,200 mm, total width: 4,000 mm, TYC FVP 2011 CNC Gantry Machining Center with Horizontal Head Main description PEGAS-GONDA s.r.o., a manufacturer of band saws, offers for sale a TYC FVP 2011 CNC gantry machining center with an interchangeable horizontal milling head. The machine was commissioned in 2007 and has been used exclusively in our production facility in a single-shift operation. It is fully operational, connected to power, and available for inspection under working conditions. Upon prior agreement, a test machining operation and a verification of the machine’s geometric accuracy can be arranged. The machine is being sold due to the modernization of our production technology. Technical specifications Manufacturer: TYC Model: FVP 2011 Machine type: CNC gantry machining center Year commissioned: 2007 Control system: Heidenhain Travel: X-axis: 2,040 mm Y-axis: 1,100 mm Z-axis: 760 mm Working table: Table dimensions: 2,000 × 1,000 mm Maximum table load: 3,500 kg Spindle and heads: Spindle taper: ISO 50 Vertical head speed: 6,000 rpm Horizontal head speed: 3,000 rpm Horizontal head indexing: 5° Tool magazine: Podpfxjzp Iqas Amyjgp Automatic tool changer Capacity: 40 tools Cooling: External coolant supply Internal coolant supply Machine condition Fully operational Connected and ready for demonstration Used in single-shift operation Test machining possible by prior arrangement Geometric accuracy inspection possible Technical documentation available Optional pallet clamping system A pallet clamping system with two pallets can also be supplied. One pallet is located inside the machine, while the second pallet can be used for workpiece preparation outside the machining area. This significantly reduces setup and preparation times. Price Machine price: EUR 82,000 net, plus VAT Optional two-pallet clamping system: EUR 4,167 net, plus VAT Inspection and further information The machine can be inspected and demonstrated under power at our production facility in the Czech Republic. Additional photographs and technical documentation are available upon request. A personal inspection, test machining, and geometric accuracy verification can be arranged for serious prospective buyers. Location: Slavkov u Brna, Czech Republic Seller: PEGAS-GONDA s.r.o.

Condition: new, Year of construction: 2026, fuel type: diesel, motor manufacturer: Deutz F4M 2011, General information Field of application: Construction Pgjdpfx Ajznr Adjmyep Weights Empty weight: 1.550 kg Functional Generator capacity: 33 kVA Dimensions of cargo space: 240 x 120 x 175 cm CE mark: yes Other information Fuel consumption: 225 g/ kWh Generator: Mecc alte Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 175 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = - Super Silent 55 dBA @ 7 meter

Condition: good (used), Year of construction: 2011, operating hours: 11,960 h, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, Video can be sent via WhatsApp. Ongoing stock, see website. Prices ex Nuland. Van de Wert Trading B.V. has a varying stock of machinery, trucks, trailers, and attachments. All our deliveries are at trade prices, in 'AS-IS' condition without warranties (see our general terms and conditions). You are welcome to arrange a viewing and/or test drive by appointment, free of obligation. Please call in advance, as we are not always on site. Van de Wert Trading B.V. Pedpezmfvhofx Amyjgp Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2021, Exhibition unit (little used) Lubrication: Grease Max. output speed n2: 4,000 rpm Gear ratio (n1:n2): 1:0.8 Weight: approx. 8 kg Machine connection: HSK F63 Tool holder Usable width: 24 Storage location: Garbsen Psdpfx Asvvi Iwemysgp

Condition: used, Year of construction: 2011, Pacton TXD 3 Sliding Curtain Trailer / Sliding Roof / Hard Wood Floor / Lift Axle / 2011 Stainless Steel Toolbox Sliding Roof Hard Wood Floor Lift Axle A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex-works Nuland. Van de Wert Trading B.V. has a varying stock of machinery, trucks, trailers, and attachments. All our deliveries are at trade prices and in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always available. Pjdpfjzki Agex Amysgp Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2011, operating hours: 40,885 h, overall weight: 6,500 kg, displacement volume: 49 cm³, clamping force: 110 kN, injection pressure: 2,236 bar, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) delivery time: on request Pgodjw N Egaopfx Amyep terms of payment: 100% prior to delivery

Condition: good (used), Year of construction: 2011, Schaffer - 2436 - shovel - wheel loader - 2011 - bucket - pallet fork Very well-maintained machine, free from defects. We have a continuous supply; please see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any warranties (see our general terms and conditions). Psdpfx Amszd Ew Hoyjgp You can make a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, mileage: 182,130 km, power: 294 kW (399.73 HP), first registration: 02/2011, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro5, loading space length: 4,800 mm, loading space width: 2,400 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), Phone: call (Contact · Telephone · Mobile · WhatsApp) Special Equipment: Storage box, rear axle load 13.0 t, trailer coupling: Ringfeder 5050 A, car phone antenna, traction control system (ASR), trailer data display, work lights (2) on cab roof, audio system: MAN Topline radio 12V with navigation system, exterior mirrors and wide-angle mirrors electrically adjustable and heated, wide-angle mirror with electric maneuvering aid, 175 Ah battery, mechanical battery master switch, electrically adjustable and heated curb mirror (right), bolted bridge mounting brackets, air horns on cab roof (2), cab: reinforced suspension, cab: with 2 rear wall windows, tinted, cab: with exterior grab handle, comfort driver’s seat, air-suspended, heated and ventilated with lumbar support, flame start system, generator 28 V / 110 A, 12-speed transmission - type: ZF 12 AS, Tipmatic, rear axle AP HPD-1382/HP-1352, hydraulic pump (Meiller-pump 265/1), rocker lever - brake EVBec controlled, automatic climate control, multifunction steering wheel, high-mounted air intake, dust pre-separator air filter, air deflector against dust swirl, heated air dryer, PTO NH/4C without flange, retarder, seat cover/upholstery: comfort quality, external sun visor, sun roller blind for side window, driver’s door, sound system, stone guard grille in front of radiator, control module for external data exchange, foldable rear underrun protection, rear wall window curtain, extra step for construction vehicles, heated additional fuel filter with water separator Additional Equipment: Axle configuration: 6x4, approach/front mirror, trailer socket 24V / 7-pin, trailer ABS socket, MAN-Tronic on-board computer, rear axle differential lock, MAN Brakematic electronic braking system, EURO 5 engine, cab: M (medium length), suspension: leaf/leaf, electric window lifts, tinted windscreen, manual roof hatch, body type: tipper, rocker lever - brake EVB, heated fuel filter, fuel tank: combination tank - 300 L diesel + 40 L urea solution (AdBlue), air compressor 1-cylinder 360 cc, engine 10.5 L - 294 kW diesel, side-mounted spare wheel hoist, front axle disc brakes, rear side windows tinted, sunblind for front windscreen, spray mist reduction, stabilizer on both rear axles, front axle stabilizer, 3-piece steel bumper, rear axle drum brake, tinted door windows, viscous fan, front axle VO-09 straight, central locking, permissible total weight 26,000 kg * VIN: WMA26SZZXBM559896 * 3-way tipper * With Boarmatik * 6-stage retarder * Full leaf spring suspension * Automatic climate control * Seat heating / seat ventilation * Euro 5 EEV * Curb weight: * Payload: Pedpfx Ajqcrifomyegp * Total weight: 26,000 kg * Wheelbase: * Tipper length: 4.80 m * Tipper width: 2.40 m * Truck year: 2011 * Valid inspection (TÜV) until 02/2023 * ----Palfinger PK 15002 * Serial number: 0811158 * High boom * Rotator + grab connections * 4 hydraulic extensions * Lifting capacity: 2820 / 1820 / 1240 / 880 / 660 kg * Outreach: 4.3 / 5.9 / 7.9 / 10.2 / 12.4 m * Crane year: 2002 * ----Net price * All information subject to change

Condition: used, mileage: 1,001 km, first registration: 01/2011, empty load weight: 330 kg, maximum load weight: 1,900 kg, overall weight: 2,230 kg, color: black, driver cabin: other, gearing type: other, Year of construction: 2011, Vehicle location: Bovenden. Equipment: Kinshofer stone clamp with swivel servo, immersion depth 1,650 mm, with rotary motor and pressure rails. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! Pgsdpfxelfdi Us Amyep

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, total height: 3,590 mm, table load: 1,814 kg, overall weight: 16,914 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, tool weight: 13,600 g, product length (max.): 7,320 mm, number of axes: 3, This 3-axis HAAS VF 11/50 was manufactured in 2011. It features a robust CNC control, a large table surface of 3048 × 711 mm, and can handle a maximum load of 1814 kg. With X, Y, Z travels of 3048 mm, 1016 mm, and 762 mm respectively, it offers extensive working range. The spindle can reach up to 7500 rpm, and it includes a 30+1 random tool changer. Consider the opportunity to buy this HAAS VF 11/50 vertical machining centre. Contact us for more information. • Table Surface: 3048 × 711 mm • Table Height from Floor: 850 mm Pedpfox D Imqox Amyogp • Working Acceleration: 9.1 m/min – 15.2 m/min • Tool Change Type: Random 30+1 • Magazine Positions: 254 mm • Maximum Diameter with Adjacent/Alternate Tools: 102 mm – 254 mm • Maximum Tool Length: 406 mm

Condition: good (used), Year of construction: 2011, operating hours: 978 h, fuel type: electric, Haulotte Star 10 Electric Mast Lift / Vertical Boom Lift, 10m working height, 2011. A video can be sent via WhatsApp. We have a continuous stock; please see our website. Pedpfxey Uvz To Amyogp Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can arrange a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2011, operating hours: 12,400 h, Forklift LINDE H80D-01 duplo415 SIDESHIFT/FORK POSITIONER DEUTZ DIESEL 2011 Video can be sent via Whatsapp. Continuous stock, see website. Prices ex Nuland. Pgedpfxsyrdraj Amyop Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers and attachments. All our deliveries are at trade prices in AS-IS condition without warranties. (see our general terms and conditions) For a viewing and/or test drive, you can make an appointment without obligation. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland