Used Chemineer Ltd Mixing Tank 500L for sale (18,338)

Condition: like new (used), Chemineer Ltd PD5M mixing tanks Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph Podekl Hq Nopfx Ahcora

Year of construction: 2025, condition: like new (used), functionality: fully functional, Stainless Steel Mixing Tank 500l speed 23 rpm date of production 2024.12 used 3-4 times only Psdpfx Asyhnn Rjhcjra

Condition: excellent (used), Becomix Stirring & Mixing Tank Electric lift lid Scraper and mixer motors 316 stainless steel Predpfx Ahjx Dnkiocoa 3000 lts capacity

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 50,000 l, usable tank capacity: 30,000 l, total height: 4,275 mm, inner diameter: 4,000 mm, outer diameter: 4,020 mm, overall weight: 4,250 kg, wall material: stainless steel, wall thickness: 10 mm, operating temperature: 100 °C, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 10mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 30,000 Litres. Shell ID: 4,000mm. Overall Height: 4,275mm. Shell & Dish Wall Thickness: 10mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 4,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19785. Factory Tested: July 2021. Nozzles and fittings include 610mm hinged manway with grill, triple CIP sprayball arrangement, inlet connections, vent, pressure relief valve connection, Endress & Hauser hygienic thermowell, dual level switches, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options. Prjdpfx Ahszhn Rqscsa

Condition: good (used), 2 x JYGKJ 500L Cooking Kettles from Jiangxi Jingye Machinery Technology Scrape surface mixing, and tilting (Serial Number: JY201904058) (Serial Number: JY201904059) Pedpfx Ahjzr H Rwocera With steam generator system Located in Melksham, Wiltshire

Condition: used, Year of construction: 2018, REF: MM6441 Prjdpfoza T Slex Ahcja Wenzhou Jiangbo Dairy Equipment Factory Co. Ltd (Chinese) 5000L stainless-steel tank with agitator. Manufacturer - Wenzhou Jiangbo Dairy Equipment Factory Co., Ltd. Model - DCG. Date of manufacture - 2018. Speed - 36 r/min. Electrical requirements – 415 V / 50 hz / 3 phase.

Condition: excellent (used), Year of construction: 2016, usable tank capacity: 18,000 l, total width: 2,200 mm, total height: 4,500 mm, For Sale: Sourdough preparation and storage set 3x IsernHäger Cooled and insulated stainless steel mixing/storage tank + 1x Diosna Isernhager preparation tank 3x PABST MF6000 stainless steel mixing tank - 6,000 l (2016) - Insulated (IsernHäger) Technical specifications: Brand: PABST Type: MF6000 Year of manufacture: 2016 Capacity: 6,000 liters Material: Stainless steel Insulation: Yes, fully insulated Manhole: Yes, equipped with an inspection hatch Total height: approx. 4,500 mm (4.5 meters) Tank height (without frame): approx. 2,800 mm Total width/diameter: approx. 2,200 mm Net weight: 1,650 kg Predpfx Aozval Ajhcsa Mixing system: Yes, equipped with a built-in agitator Agitator power: 7.5 kW Description: High-quality PABST MF6000 vertical stainless steel storage and mixing tank for sale. These high-quality industrial tanks from 2016 have a capacity of 6,000 liters each and are ideally suited for the food industry, including large-scale bakeries, for the storage and processing of liquid ingredients or dough products. Equipped with a powerful, integrated agitator (7.5 kW) mounted on the top, the tank ensures very efficient mixing and homogenization. The tank is fully insulated to maintain a constant product temperature during processing or storage. Key features: High-quality construction: Made of high-quality stainless steel for maximum hygiene and durability. Powerful agitator: Integrated 7.5 kW motor effortlessly handles fluids with varying viscosities. Full insulation: Excellent temperature control for sensitive ingredients. Easy to maintain: Equipped with an inspection hatch (manhole) on the top for easy access and cleaning. Safe design: Robust vertical construction on heavy-duty legs. 1x IsernHäger Diosna storage tank 1000 syst Brand: IsernHäger Load cells: Yes Manhole: Yes Own weight: 410 kg Stainless steel: Yes Total dimension Height: 2000 mm Year of manufacture: 2016 Type: 1000 syst Agitator power: 5.2 kW Tank diameter: 1300 mm Tank height: 1150 mm It is possible to view these tanks at our location. If you have any questions or comments, please do not hesitate to contact us. Sincerely, Leo Holland

Condition: like new (used), Horizontal Mixing Tank ROSSI & CATELLI 3,000 L – Stainless Steel ROSSI & CATELLI 3,000-liter horizontal mixing tank, designed for the mixing, homogenization, and intermediate storage of liquid and semi-liquid products in industrial processes within the food industry. Manufactured by ROSSI & CATELLI, the equipment features a horizontal cylindrical configuration and includes a motorized agitation system, allowing the product to remain in motion and achieve uniform mixing throughout the process. Its 3,000-liter capacity and stainless-steel construction make it a particularly interesting solution for facilities that require processing large volumes of product. MAIN FEATURES -Manufacturer: ROSSI & CATELLI -Type: Horizontal mixing tank -Capacity: 3,000 liters -Horizontal cylindrical configuration -Agitation/mixing system -Driven by a motor-reducer -Stainless steel construction -Integrated support structure -Top inspection/access hatch -Sanitary product connections -Product inlet and outlet -Integrated piping and connection system -Designed for batch industrial processes -Hygienic construction for the food industry Predpfxezw E Aij Ahcoa -Integrable into existing processing lines APPLICATION The ROSSI & CATELLI 3,000 L is designed to perform mixing, homogenization, accumulation, and product maintenance operations within an industrial line. The agitation system keeps the components in motion, promoting uniform distribution and helping to prevent separation or sedimentation during certain phases of the process, depending on the characteristics of the product. It can be integrated with: Preparation and mixing systems Sanitary pumps Heat exchangers Pasteurizers Homogenizers Dosing systems Buffer tanks Filling equipment Complete processing lines APPLICATIONS Especially suitable for juice and beverage industries, fruit and vegetable processors, sauce manufacturers, purée producers, concentrate manufacturers, and other food industries that require a large-capacity tank with a mixing system. Depending on its configuration, it can be used with juices, purées, sauces, tomato products, concentrates, fruit preparations, and other liquid or semi-liquid products. The combination of ROSSI & CATELLI, 3,000-liter capacity, horizontal configuration, and agitation system provides a robust solution for industrial mixing and intermediate storage processes. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 100,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Psdpfx Aezhnlzjhcera Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Pedpfxetrdyrs Ahcjra Type: 9601 Volume: 200L Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Psdpfszp H R Eex Ahcsra Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: used, Heated Chocolate Mixing Tanks Qty 2 available Prjdpfjxtqx Ujx Ahcja Stainless steel

Condition: good (used), 2 stainless steel emulsion tanks, each with a capacity of 40 m³ for asphalt mixes, suitable for use with emulsion or bitumen Pjdpoxy Ivqofx Ahcsra Diameter: 3.15 m Length: 12.40 m

Condition: like new (used), Year of construction: 2015, 50 liter mixing tank/reactor with Huber temperature control (0 to 65 ° C) Prodpfjhkd Dcox Ahcea With agitation, lifting the lid, tank lighting, 4 vents. 1 ball of CIP All documentation is in English (including FAT)

Year of construction: 1996, condition: good (used), Stirred tank, agitated container, agitator tank, agitator container, silo system, transport silo, tank, fertilizer storage silo, melting vessel, melting tank -Stainless steel tank: with agitator and vibration limit switch -Contents: 1000 liters -Hazard class: AIII -Agitator: ATB 1.5 kW -without heating -Vibration limit switch: VEGA SWING 83G125Ex -Individual components: see photos / nameplate -Number: 5 containers available -Price: per piece -Transport dimensions: 1200/1200/H1885 mm Podjiiig Nepfx Ahcjra -Weight: 266 kg/unit

Condition: used, Mixing Tank, Pressure Vessel, Used Machine Manufacturer: Robert Hinkel & Co Model: 9601 Volume: 200 L Operating Pressure: 3 bar Electrical Data: 380V; 2.0A; 0.75 kW Predpsxacl Tefx Ahcoa Overall Dimensions: Ø 850 mm, height 1780 mm Design: Cylindrical tank with shallow-dished top and bottom, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable, secured with a flanged bolted connection. The lid includes a cleaning/inspection opening. Material: Carbon steel with painted surface

Condition: like new (used), Year of construction: 1989, functionality: fully functional, T. Giusti & Son Ltd s/s double jacketed mixing tank with steam boiler, serial number: J10717, capacity: 500 liter, dimensions tank: Ø 1100 mm x 2600 mm, dimensions steam boiler: 800 mm x 620 mm x 1800 mm, with switch cabinet, Pedpfjxrnuwsx Ahcsra

Condition: used, Year of construction: 1991, Complete mixing tank system comprising three vertical pressure tanks, each with two cooling zones, frame insulation, a bottom-entry agitator and various fittings. One of the tanks is also equipped with a CO₂ gas injection unit and a pump for tangential feed. A pipe fence, pipe panel, control cabinet and various measurement and control equipment and pumps complete the system. Additional title: Insulated, coolable stainless steel pressure tanks as a mixing system with proce Volume: 33000 l per tank Max. pressure: 2 bar Pump capacity: 28 m³/h Operating temperature: 40 °C Length: 2600 mm Podpfxjzgcuzo Ahcsra Width: 2600 mm Height: 8500 mm Weight: 3900 kg Operation / Control: Rush-Flow-Dosing: SPS-Typ = C7-633, HMI = ProTool Material: stainless steel 1.4301 Position: free standing Base construction: Cylindrical tank with dished ends and pipe feet on spherical caps Features: 2 zone frame cooling, insulation with stainless steel sheet panelling, agitator in the base, manhole at the side, tank fittings; 2 pumps; pipe fence; panel with CO2 fumigation; measurement and control technology; control cabinet with control panel; Other: Pipe fencing, pipe panels, measurement and control technology. Pumps, CO₂ injection unit

Condition: good (used), Item: D-2414-Tank500 Predpeh E Dp Ujfx Ahcoa Stainless Steel transport tank. Single skin, CIP connection Lid Ø 400 mm Dia. Ø950 mm Total H 1500 mm Outlet 2"

Condition: used, Mixing tank with two different agitators. Capacity approx. 20 hl Additional title: Vertical stainless steel container with two agitators Content: 2000 l Length: 1500 mm Psdjzgc Arjpfx Ahcjra Width: 1500 mm Height: 2200 mm Material: stainless steel Position: free standing Base construction: Cylindrical container with flat lid Features: 2 top-entry agitators, hinged lid, side outlet

Condition: used, Year of construction: 2005, Manufacturer: unknown Volume: 600 L Jacketed : Yes Agitation: yes Motor : Stober Power : 0,25 KW Year : 2005 Podpjx R Axkjfx Ahcjra

Condition: used, tank capacity: 50,000 l, total width: 3,600 mm, total height: 8,700 mm, Insulated 50m³ stainless steel tank with heating jacket and agitator Prjdpfx Ahozwm Nkjcsa Diameter: 3.60m Height: 7.20m + 1.50m agitator = total height 8.70m The tank is insulated and lined with steel sheet. The heating strip is located in the lower half of the tank. The tank has a flat bottom. Gear motor power: 10 kW/15 kW. Mixing speed: approx. 20 rpm.

Condition: used, This listing is for a Sartorius Stedim Palletank Cubical Jacketed-Mix 200L Storage Tank. The unit is in full working condition and is ready for immediate release. Unit is supplied with x2 Sartorius 200L STD Plastic Palletank and dolly. The Sartorius Stedim Palletank Cubical Jacketed-Mix 200L is a high-performance storage and mixing solution designed for biopharmaceutical applications. Engineered for compatibility with Sartorius single-use mixing systems, this temperature-controlled stainless steel tank provides efficient liquid handling, precise temperature control, and optimized mixing performance. Key Features: - Jacketed Temperature Control – Ensures precise heating or cooling for sensitive bioprocess applications. - 200L Capacity – Ideal for medium-scale liquid storage and mixing in GMP environments. - Ergonomic Design – Front doors allow for easy bag installation and port gates facilitate tubing and sensor integration. - Integrated Pro Mixer Compatibility – Railed port enables quick coupling of the mobile Pro Mixer drive unit in under a minute. - Optimized Draining System – Sloped bottom board ensures high product recovery without manual bag manipulation. - Weighing Function Option – Allows for precise volume control, preventing aggregate formation and ensuring product quality. - Visual Inspection Windows – Side windows enable real-time process monitoring during mixing. - Surface Finish Options – Available in Bead Blast or ASME #4 brushed finish for enhanced corrosion resistance and cleanability. Specifications: Model: Palletank Cubical Jacketed-Mix 200L Capacity: 200 Liters Material: Stainless Steel Jacket Type: Temperature-Controlled Jacket Mixing Type: Integrated Pro Mixer Compatibility Drainage System Sloped Bottom for High Recovery Application Storage & Mixing for Bioprocessing Compliance GMP, Biopharma Standards Benefits: Prjdpexxybvefx Ahcja - Precise Temperature Control – Maintains optimal conditions for biologics and cell culture media. - Efficient Mixing – Designed for homogeneous blending of process liquids, buffers, and media. - Enhanced Process Control – Weighing and volume control prevent aggregate formation. - Easy Integration – Compatible with Sartorius Flexsafe® Bags & Biostat® Systems. - Ergonomic & User-Friendly – Front door access and port gates for seamless tubing and sensor installation. - Durable & Hygienic – Stainless steel GMP-compliant construction with highly cleanable surfaces. - Applications: - Biopharmaceutical Manufacturing - Cell Culture & Media Preparation - Buffer & Reagent Storage - Vaccine & Protein Processing

Condition: good (used), Mixing tank, mixing container, agitator tank, agitator container, silo system, transport silo, tank, fertilizer storage silo -The tank comes from a paint manufacturer. -Tank and agitator: made of stainless steel The tank can be cleaned for an extra charge. -Agitator with saw teeth -Geared motor: 15 kW 311 rpm -Contents: 7.5 m³ -Outlet: bottom -on stand -Dimensions: 2050/2050/H5570 mm Psdocdga Uopfx Ahcora -Weight: 1750 kg

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,350 mm, outer diameter: 1,750 mm, overall weight: 1,250 kg, wall material: stainless steel, wall thickness: 8 mm, manhole diameter: 610 mm, manhole location: top, operating temperature: 80 °C, Equipment: sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell OD: 1,750mm. Overall Height: 3,350mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +80°C. Empty Weight: 1,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19693. Factory Tested: November 2020. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and spray fitting, pressure relief valve connection, nitrogen blanketing connection, Endress & Hauser thermowell pocket, lifting lugs, and earthing boss. Seven units currently available both with and without an agitator fitted. All vessels are brand new and never commissioned, sourced directly from the same INEOS facility. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Psdpjzht Smefx Ahcera Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.