Used Cga Automation Rewinding Machine for sale (74,444)

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 68086, Machine can make rolls with paper core. And Coreless rolls (Without cardboard tubes) Semi-Automatic Coreless Prestretch Rewinding Machine Specification • Maximum parent roll diameter 500mm • Maximum web width 600mm. Ijdpjxpq T Refx Ahyobc Master roll core 76mm diameter. 4 roller stretcher train geared to give a stretch of 335% • Servo driven rewind to vary collection tension from 240% to 335%. Adjustable external electronic rewind Variable speed drive up to 450 meters per minute. • Single position coreless rewind station for either 50, 60 or 76mm ID rolls. (with change parts) • Programmable electronic roll length counter. Maximum rewind roll diameter 250mm. Slitting blades for multiple finished roll winding (with change parts) Rolls can be produced with or without oscillation and edge guiding Film break sensor. 3 - phase 400 volt supply. / Air requirements - 4 cfm max. at 80 psi. Guarding to suit current C.E. requirements

Condition: new, HAHN-Automation Type: BDE11154003 Resistance welding system The system is designed for the automated resistance welding of the following components: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any other use of the system than that described above is not intended and is therefore not permitted! System layout Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (l x w) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 Ibsdpfezd Rmgox Ahyec - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Controller: ST-T13V2.0 Power supply: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction system TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Condition: unused, machine has never been used in production Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 2026, operating hours: 50 h, functionality: fully functional, machine/vehicle number: YC-2600, Toilet roll rewinding machine toilet roll cutting machine toilet roll packing machine air compressor one jumbo paper roll 1368kg more than 2000 paper cone free full package only €37000 Ibjdsz Ih T Aspfx Ahyoc

Condition: used, functionality: fully functional, overall weight: 1,000 kg, A machine designed to automate the gluing of display units, display stands, crowners and pall boxes. Its strength lies in its versatility. Easy to programme, it will fit into any gluing department seamlessly, causing minimal disruption to the department. Ijdpfsr Hqgxjx Ahysbc

Year of construction: 2015, condition: new, functionality: fully functional, Automated manufacturing plant for the production of SDR 11 and SDR17 grade tube bends Isdpfxsu Itlne Ahysbc Patented bending system where the ends of the tubes are inserted into the bend radius during bending. This reduces the reduction of the outer wall of the tube during bending and reduces costly material additions to compensate for the loss of wall thickness. Tube bends can be manufactured with a final bend angle of 90°. Variable bend angle adjustment Simultaneous heating of the bending blank in the radiator field Rotation of bending blanks during heating to achieve homogeneous heating The ends are not heated, so their geometry remains unchanged. The bending of the tube can therefore be further processed by conventional butt welding of tubes Automatic transport of semi-finished products from the buffer hopper to the removal of the finished tube bends, depending on customer requirements. Siemens PLC control system with touchscreen user interface

Condition: used, This listing is for a Quickpouch Automated Form-Fill Seal Packaging Machine with Videojet Dataflex Printer for Quickpouch Auto loader. Iodpfxoxzg Hqj Ahyebc Manuals are available on request.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 919, power of the servo motor: 750 W, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 150 mm, feed length Y-axis: 100 mm, 8 C – JAM TC 138-EP-FC Automatic Pocket Setter with Brother Sewing Head (2001) CNC Controlled Automatic Pocket Setting Workstation for Jeans & Workwear Production Professional-grade JAM TC 138-EP-FC Automatic Pocket Setter equipped with a high-performance Brother automated sewing system. Manufactured by JAM s.r.l. (Italy), this fully integrated workstation is designed for automated folding and stitching of patch pockets used in jeans, workwear, jackets, and other garment applications requiring high productivity and repeatable quality. The machine combines programmable CNC-controlled sewing, automated pneumatic material handling, precision folding templates, and automatic positioning technology. The system is capable of folding and sewing pocket components with minimal operator intervention while maintaining consistent quality throughout long production runs. The unit was previously used in professional garment manufacturing and remained operational until factory shutdown. Technical Specifications • Manufacturer: JAM s.r.l. • Model: TC 138-EP-FC • Year of Manufacture: 2001 • Machine Number (Matricola): 919 • Reference Number: 8 C • Sewing Head: Brother Automated Sewing Unit • Control System: Brother BAS CNC Controller • Automation Platform: JAM System • Servo Motor Power: 750 W • Power Supply: 400 V, 3-Phase • Frequency: 50/60 Hz • Motor Speed: o 1390 rpm (50 Hz) o 1680 rpm (60 Hz) • X-Axis Feed Length: 150 mm • Y-Axis Feed Length: 100 mm • Pneumatic Supply Required Key Features • Fully automated pocket setting workstation • CNC-controlled programmable sewing system • Automated pocket folding and positioning Ijdpozgw Ebefx Ahyebc • Pneumatic clamping and material handling • Fast pattern change capability • High repeatability and consistent stitch quality • Designed for continuous industrial production • Heavy-duty Italian automation platform • Integrated Brother sewing technology • Suitable for denim, workwear, and garment manufacturing Includes • JAM TC 138-EP-FC automated pocket setter • Brother automated sewing head • Brother BAS CNC control system • Dual control panel interface • Integrated pneumatic clamping system • Automated fabric handling system • Pocket folding templates and guides • Stainless steel workstation table • Industrial steel frame • Safety guards • Integrated workstation lighting • Pneumatic components and connections Applications • Automatic patch pocket attachment • Jeans pocket setting • Workwear pocket production • Chino and trouser pocket attachment • Garment component sewing • Reinforcement stitching • Label attachment operations • High-volume apparel manufacturing Condition • Fully functional • Operational prior to factory shutdown • Serviced on 27.02.2026 • Good industrial condition • Normal cosmetic wear consistent with production use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the machine's CNC control system, pneumatic components, and calibration requirements. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation.

Condition: excellent (used), Year of construction: 2017, operating hours: 12,300 h, functionality: fully functional, machine/vehicle number: 7846, travel distance X-axis: 455 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, total height: 2,600 mm, total width: 2,160 mm, total length: 2,600 mm, table width: 400 mm, type of input current: three-phase, distance table to quill: 450 mm, table length: 820 mm, warranty duration: 6 months, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 2,800 kg, table load: 800 kg, input frequency: 50 Hz, Equipment: documentation/manual, EDM312MF30 + AWEX100/5 100 electrode positions 5 pallet positions 320x320mm Operating hours 12,300h Technical data: Travel ranges: 455x300x300mm Workpiece table 820x400mm Tank size 900x520mm Filling height 300mm Ibsdpfxjz I Syms Ahysc Distance table/electrode holder 150/450mm Workpiece weight max. 800kg Dielectric fluid max. 700l Dimensions WxDxH 2160x2000x2610mm Machine weight 2500kg Mains connection 3/N/PE 400/230 50Hz Power consumption 6.7 kVA Equipment: Color: Light/Gray Control interface MF30 V3.2 Touch screen display Generator, exogenous 60A Direct measuring system in all axes Cartridge filter Cooling unit integrated CO2 extinguishing system C-axis 100/min., holding brake Manual control panel with accept button Lowering tank, automatic positioning Chuck Erowa Warranty 12 months Transport Commissioning on site Training

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 17,000 mm, travel distance Y-axis: 4,800 mm, travel distance Z-axis: 1,500 mm, table length: 16,000 mm, table width: 3,000 mm, spindle speed (max.): 3,000 rpm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, distance between stands: 3,800 mm, type of input current: three-phase, position of the milling head: vertikal / Winkelkopf, rotational speed (max.): 3,000 rpm, distance table to spindle center: 2,300 mm, overall weight: 90,000 kg, spindle nose: ISO 60 / ISO 50 Adapter, spindle motor power: 60,000 W, Equipment: rotational speed infinitely variable, ➡️ WALDRICH COBURG CNC GANTRY MILLING MACHINE ⬅️ Heavy Duty Machining | Siemens 840D Retrofit | Ready for Production High-quality CNC gantry milling machine manufactured by Waldrich Coburg available for sale in very good condition. ✔ Machine under power ✔ Inspection & test run possible ✔ Siemens 840D retrofit (2013) ✔ New electrical system & cabinets ✔ New motors & drives ✔ Heidenhain glass scales on all axes ✔ Ideal for large part machining & heavy-duty applications Technical Data X travel: 17,000 mm Y travel: 4,800 mm Z travel: 1,500 mm Floor plates: 16,000 x 3,000 mm Distance between columns: 3,800 mm Distance table to spindle face: 2,300 mm Spindle power: 60 kW Spindle speed: 0.4 – 3,000 rpm Tool taper: ISO 60 / ISO 50 adapter Iedpfx Ahsy Rrb Ieysbc Machine weight: approx. 90,000 kg Equipment Siemens 840D CNC control 2-step gearbox Right angle head WFU 250 with automatic indexing Right angle head WFU 500 with automatic indexing Rapid tapping Tool trolley with tool holders Steel way covers on X/Y axes 2 chip conveyors Perfect for: Heavy machining Machine building Energy industry Shipbuilding Steel & rolling mill industry Subcontract manufacturing 📍 Location: USA 🌍 Worldwide shipping can be arranged 📞 Please contact us for more information, videos, or inspection appointments.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, type of input current: AC, input voltage: 400 V, D&K PROTEUS fully automated B1 laminating machine. Production speed: 35 m/min. Max sheet size: 760 x 1050mm. Min sheet size: 210 x 220mm. Stock range: 115 - 600gsm. Jogger delivery Iodpfx Aez D Uanjhysbc

Condition: used, Year of construction: 2004, functionality: fully functional, Well used Sunnen honing machine with Felsomat loading system. Diameter range (INSIDE Ø)¹: Krossgrinding® tools: 5.46 to 32 mm when loaded with CGT tools TurboHone® tools: 3.81 to 32 mm when loaded with MMT tools Connecting rod tools: 53.8 to 63.8 mm when fitted with CRT tools Larger tools: 25.4 to 101.6 mm Workpiece²: 8 to 150 mm Max. Workpiece weight: 2.0 kg Spindle speed range: 250 to 3,700 rpm, adjustable Standard speed: High torque in the low speed range: 20 to 1,000 rpm, adjustable Stroke speed range: 33 to 500 H/min, adjustable Coolant system Pump motor: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l and 11.2 l/min Coolant requirements: Compressed air requirements: 566 l/min at 4.48 bar, 5.52 bar is recommended Ibedpsud Nm Rjfx Ahyjc Temperature range: 0° to 35° C Floor space requirements: (concrete floor) At least 150 mm thick Machine dimensions: L 2946 mm x W 2971 x H 1829 Color: Pearl grey with pewter grey and burgundy decorative stripes Stand weight: 1,579 kg Noise emissions: < 71 dB (A) continuous load, < 75 dB (A) peak load Special features: Automatic set-up: spindle speed, stroke speed, stroke length, infeed value and sparking Automatic finishing: Standard Machine operating modes Automatic: Manual: Series production Individual production Clamping optional

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Automatic FROMM PM100002 Industrial Strapping Machine – Year 2022 – PET Strap – Automatic Wooden Slat Insertion System FROMM Packaging Automation industrial automatic strapping machine, model PM100002, manufactured in 2022 and designed for integration into an automated production and packaging line. The machine is particularly suitable for the automatic strapping of bundles, profiles, long products and industrial packages. Identification details Manufacturer: FROMM Packaging Automation S.r.l. Model: PM100002 Year of manufacture: 2022 Project number: 2110304 Serial number: 48.100002.057 Original delivery date: 19 September 2022 Machine configuration FROMM MH550 side-mounted strapping head KB4 strap dispenser Lower side magazine for wooden slats Automatic slat lifting system Automatic magazine movement Strapping arch Pneumatic system Electrical cabinet and control system Prepared for integration and communication with an automated production line Ibjdozq Df Nepfx Ahyjc Technical specifications Strap type: PET/plastic strap, 16 × 0.8 mm Strap feeding speed: 5.3 m/s Strap recovery speed: 5.3 m/s Adjustable tensioning force: 0.5–3.5 kN Final tensioning speed: 105 mm/s Power supply: 400 V – 50 Hz Maximum installed power: 3.8 kW Maximum current: 9.8 A Minimum compressed-air pressure: 6 bar The FROMM MH550 is a heavy-duty industrial strapping head designed for demanding applications, with a maximum tensioning force of approximately 3,500 N and friction-weld strap sealing. Documentation included. Only 108.000 cycles The machine is supplied with extensive original FROMM documentation, including: Complete instruction manual Electrical diagrams Pneumatic diagrams Spare-parts lists MH550 strapping-head manual KB4 dispenser manual The equipment was originally supplied as partly completed machinery intended for integration into a complete production line. The relevant Declaration of Incorporation is available.

Condition: excellent (used), Year of construction: 2021, Semi-Automatic and Fully Automatic Pallet Wrapping Machine Ibsdpswb A N Rsfx Ahyjc Manufacturer: Cousins Model: LPSWA-CE ("The Switch Semi2Auto") Operation: Semi-automatic & fully automatic Year of Manufacture: 2021/2022 Features and Specifications of the LP-SWA Series Production Speed: Up to 35 loads per hour. Load Capacity: Maximum dynamic load weight: 4,500 lbs – 10,000 lbs static Maximum load size to safely pass through the tower: 67" x 67" (96" load diagonal) x 80" H Maximum load size to remain within the turntable: 46" W x 46" L (65" load diagonal) x 80" H Low-profile turntable: 65-inch diameter, laser-cut steel plate with all-around deck protection. Maintenance-free 54-roller bearing support system. Turntable height 2.813 inches from the ground. ANSI No. 50 direct chain drive with chain tensioner. Rotational speed between 3 and 12 RPM with smooth start acceleration. 1/2 HP AC motor with variable speed. End-of-cycle deceleration and positive stop alignment. Robust all-around deck for turntable protection, 3-sided loading, and pit mounting. Forklift openings at the front and rear for easy movement. Accu-Count precise turntable positioning system for additional film savings! Film carriage lift: 1/2 HP DC motor with variable speed ANSI No. 40, direct chain drive with shock absorber and fall protection Automation Features: Fully electric – no pneumatics required. Patent-pending A-arm film cutting and holding device starts and ends the wrapping process at the top of the load. Cousins Smart Engineering has developed an advanced cutting and holding device with the A-arm. It provides significant productivity increases and safety benefits. This technology is only available on Cousins machines. This unique method of attaching and cutting the stretch film offers the following advantages: • Selectable top wrap function • Stabilizes the load early in the wrapping cycle • Places the film end at the top of the load instead of at the bottom • No film clamp on the turntable that can be damaged by dirt or operator error – also, no slip rings are required to power the turntable, reducing maintenance. • Load placement on the turntable is not critical. • No air connections or noisy compressors • New automatic safety feature for load detection during the first revolution detects uneven or partially stacked top layers and automatically adjusts the A-arm height to avoid obstructions. • A-arm fall protection Control Functions: Electronic control with LED interface Wireless start/stop remote control with one transmitter (additional transmitters available) On/Off/Reset switch and operating indicator Automatic wrapping cycle start/pause with a single button Cycle pause for applying top sheets Reinforce wrapping control for the center of the wrap Emergency stop button Turntable jog button Buttons for lowering and raising the film carriage Control of film tension (force-to-load) Separate speed controls for raising and lowering the film carriage Variable speed control of the turntable Three-beam automatic load height sensor for dark or shiny loads Separate control for 1 to 12 revolutions of the upper and lower wrap Selectable parameters for reduced film tension for overwrap.

Condition: good (used), Year of construction: 2005, functionality: fully functional, type of input current: AC, Equipment: documentation/manual, BYSTRONIC, RB-NTB-2.20x4.00-L-AL Autom. Frame Bending Machine Bystronic / Lenhardt Max. frame dimensions: 2200 x 4000 mm Profiles: aluminum and TGI (the machine is not built for TGI but it works ok.) Inkjet printer Domino A520i and bending tools included. Connection: 3/N/PE-50 Hz, 400V, 6 kW | Year: 2005. In good technical condition. Available: NOW Ibedpsxyk R Rsfx Ahysc

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2795, power of the servo motor: 750 W, input voltage: 230 V, pneumatic connection: 7 bar, For sale is a high-performance Brother automated sewing unit equipped with a JAM TC 762 F automation module, offered as a complete industrial workstation. This system is specifically designed for automated pocket setting and precision sewing operations, making it highly suitable for denim, trousers, and workwear production. The integrated automation module enables accurate material positioning, clamping, and repeatable stitching cycles with minimal operator input. The unit combines a heavy-duty Brother sewing head with JAM International automation technology, delivering consistent production quality and significantly improved efficiency compared to manual processes. The machine has been used in a professional garment factory environment and was fully operational until factory shutdown. The unit has also been video recorded in full working condition on 01.04.2026. Key advantages: • Automated pocket setting and J-stitching • High repeatability and production consistency • Reduced labor dependency • Suitable for continuous industrial production • Complete workstation ready for integration • Production Capacity: Approximately 2,600 pockets per 8-hour shift. • Maximum Speed: Operates at up to 3,600 RPM. • Quick-Change System: Features a pneumatic mold change system, allowing for fast transitions between different pocket sizes and styles. • Versatile Operation: Capable of both semi-automatic and fully automatic modes, handling both pre-ironed and unironed pockets. Includes: • Brother automated sewing machine head • JAM TC 762 F automation module (material handling and positioning) • Electronic control system (TC 762 interface) • External PC workstation (monitor, keyboard, control unit) • Pneumatic system with regulators • Dual foot pedal controls • Industrial table and heavy-duty frame Iodey Inyhspfx Ahyjbc • Safety guards and integrated lighting • Fabric support and output handling system Technical details: • Manufacturer: Brother Industries, Ltd. (Japan) • Automation module: JAM International TC 762 F (Italy) • Type: Programmable automated sewing workstation • Power: 220V • Pneumatic system required • Integrated control and external PC operation Condition: • Used industrial condition • Fully operational prior to factory shutdown • Video recorded in operation (05.03.2026) • Maintained and serviced, latest maintenance 27.02.2026 • Typical signs of use consistent with production environment • Sold as-is, where-is, without warranty Typical applications: • Automated pocket setting • Denim and trouser production • Workwear manufacturing • Reinforcement stitching • Repetitive precision sewing operations Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: used, Year of construction: 2012, Used machine Year of manufacture: 2012 Base machine - Dynestic 7521 20.6 Dynestic table For classic nesting machining with wear plate Machining length 6250 mm (DYNESTIC 20.6 additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, spindle head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, ball screw spindles Z-axis for precise positioning Technical data: The technical data refer to the DYNESTIC 7521 - 20.6 Please refer to the corresponding data sheets. Machining dimensions: Max. workpiece size for edge machining X = 6250 mm Y = 2100 mm Max. travel distances X = 7360 mm Y = 2720 mm Z = 325 mm Max. clearance height DYNESTIC table Z = 1st stage 318 mm / 2nd stage 418 mm from top edge of table (without tool, without chuck) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-Core processor Operating system Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transfer of control and program data. Data transfer takes place via high-speed internet connection Requirement: High-speed internet connection at the machine. DYNESTIC table Solid, continuous machining table with grid division, continuous grooves in X and Y direction, groove spacing 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop rails / stop Height 30 mm, pneumatically lowerable 2 stop rails in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Boring unit 7976, 24 spindles Drive power 3.0 kW 18 vertical spindles individually selectable Arrangement in L-shape, 10 in X and 8 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating right-hand / left-hand rotation n(max.) 1000 - 5710 min-1, steplessly adjustable Chuck: M 10 thread - clearance fit 11 mm without tool, without chuck 6 horizontal spindles 2 double boring spindles in X direction (32 mm distance between 1st and 2nd horizontal boring spindle) Ibsdpfjw I U Ecjx Ahyec 1 double boring spindle in Y direction Chuck: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without chuck Free space 1 for: Optional double boring spindle in X direction or Vertical adapter with double feed force Free space 2 for: Optional saw in X direction or Vertical adapter with double feed force Milling unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 min-1, steplessly adjustable, two-stage feed stroke max. power at 12000 min-1 to 24000 min-1 air-cooled with HSK-F 63 tool holder with right-hand

Condition: used, CNC universal tool grinding machine SCHÜTTE, type BU 400 CNC 4 Machine – Defective – without control system Machine not operational – electrically non-functional – without CNC control Manufacturer’s No.: Year of manufacture 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Distance between centers 700 mm Distance between centers (height) 155 mm Grinding length (X-axis) max. 400 mm Ibjdpsd Rmcmofx Ahyec Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Mains connection 380 volts, 50 Hz, 25 amps - CNC control system removed Space requirement L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control system missing. Mechanically in good condition, ideal for retrofitting with a new control system Suitable as a source of spare parts or for rebuilding with a new control system

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 454 31178 T15, Max. master reel width: 1400 mm Max. master reel weight: 1000 kg Max. master reel diameter: 1000 mm Minimum standard slit: 25 mm Rewinding reel maximum diameter: 610mm Maximum production speed: 1000m/min Separated shaftless unwinder Automatic positioning of the web guide camera Razor blades/circular knives/pneumatic knives with automatic slit positioning ASP Automatic tape applicator Linear lay-on rollers 4 differential or pneumatic shafts, mounted on two turrets with automatic reel change Automatic slit reel unloading and positioning Automatic core positioning Iedpfezhwgbsx Ahyebc 6 motors Automatic web tension control through loading cells The machine has chucks for 76 and 152mm The machine has positioning for top knife AND bottom knife; the Automatic Slit Positioning handles the positioning of both the knife and the counter knife APPLICATIONS: Bags, Food packaging, Outer packing, Soft drinks/mineral waters labelling, Aluminum covers for pharmaceuticals MATERIALS: PE, Aluminium, Papers & Laminates

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: A/18031, SCHULER - MSP2-800- Ibedpfx Ahszxqz Tsysc 4,5x1,8-400 Kapasite: 800 ton Hava Tüketimi: 30 m³/saat Güç: 296 kW Üst Tabla Ebatları: 4500 mm x 1700 mm Alt Tabla Ebatları: 4500 mm x 1800 mm Pres Yükseklik: 7,5 m Pres En: 6,50 m Pres Genişlik: 4,50 m Dakikadaki Vuruş Sayısı(maksimum): 70 spm Çalışma Reglajı: 300 Kurs Değeri: 80-360 Used machine

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: YAM0035, power of the servo motor: 1,200 W, input voltage: 230 V, clearance between the columns: 80 mm, type of input current: AC, throat depth: 150 mm, feed length X-axis: 30 mm, feed length Y-axis: 85 mm, feed length Z-axis: 12 mm, pneumatic connection: 10 bar, AMF REECE ATLAS Mark IV Automated Waistband Machine (2020) Modern High-Speed Production System – Video Ready Category Description For sale is an AMF Reece Atlas Mark IV automated industrial sewing unit, manufactured in 2020. This is a modern programmable production system designed for high-precision and repeatable garment component manufacturing. This is not a standard sewing machine but a fully automated unit capable of executing pre-programmed sewing cycles with high accuracy and consistent quality. The machine has been used in a professional garment production environment and is offered as a complete industrial workstation. Year 2020 Modern digital control system Production-ready configuration Key advantages Modern generation machine with low mechanical wear Fully programmable sewing operations High repeatability and precision Suitable for continuous industrial use European-built unit with strong parts availability Key features Programmable automated sewing cycles Integrated touchscreen control interface Pneumatic-assisted operation High precision stitch control Stable heavy-duty construction (Kessler base) Designed for continuous production environments Fast changeover between sewing programs Includes AMF Reece Atlas Mark IV machine unit Integrated control system with touchscreen Pneumatic components Industrial table and Kessler base Thread holders Technical details Manufacturer: AMF Reece Model: Atlas Mark IV Year: 2020 Serial number: YAM0035 Power supply: 230 V, 1-phase, 50/60 Hz Power output: 1.2 kW Current: 8 A Origin: Czech Republic CE marked Pneumatics required Condition Used industrial condition From professional production environment Typical signs of use Sold as-is, where-is, without warranty Inspection possible before purchase Applications Belt loop operations Pocket attachment Denim component sewing Workwear production Automated garment part manufacturing Repetitive precision sewing operations Location Valga, Estonia Logistics Ibodpjy Nd Ukjfx Ahysc Buyer responsible for dismantling and transport

Year of construction: 2009, condition: ready for operation (used), Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available. Ibsdpfx Ahstz Dkysyoc

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 2,110 h, functionality: fully functional, machine/vehicle number: 7846, travel distance X-axis: 455 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, total height: 2,600 mm, total width: 2,160 mm, total length: 2,600 mm, table width: 400 mm, type of input current: three-phase, distance table to quill: 450 mm, table length: 820 mm, warranty duration: 12 months, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 2,800 kg, table load: 800 kg, input frequency: 50 Hz, Equipment: documentation/manual, EDM312MF30 + AWEX100/5 100 electrode positions Ibedoxlchfopfx Ahyec 5 pallet positions 320x320mm Operating hours: 2110 h Technical data: Travel paths: 455x300x300mm Workpiece clamping table: 820x400mm Tank dimensions: 900x520mm Filling height: 300mm Distance between table/electrode holder: 150/450mm Max. workpiece weight: 800 kg Maximum dielectric volume: 700 liters Dimensions (W x D x H): 2160x2000x2610mm Machine weight: 2500 kg Power connection: 3/N/PE 400/230V 50Hz Power consumption: 6.7 kVA Equipment: Color: light grey MF30 V3.2 operator interface Touch screen display Exogen generator 60A Direct measuring system on all axes Cartridge filter Integrated cooling unit CO₂ extinguishing system C-axis 100/min with holding brake Handheld control unit with enabling button Lowerable tank, automatic positioning Erowa chuck 12-month warranty Transport On-site commissioning Training

Condition: used, machine/vehicle number: 008782, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 5 No of Top Units: 2 Positioning of Units by NC: yes Ibsdpfez S T Unjx Ahyec Lateral horizontal groups: yes

Condition: good (used), Roaches 3 Bad Labor Dyeing Machine Roaches 3 Bad Labor Dyeing Machine 400 V 6600 W 10 A H x W x D = 920 x 1760 x 450 mm More items in other sizes – new and used – can be found in our shop! Ibodpfx Asuzhqrohysc International shipping costs available upon request!

Condition: good (used), Roaches 3 Bad Labor Glass Coloring Machine Roaches 3 Bad Labor Coloring Machine 240 V 6500 W 10 A H x W x D = 920 x 1760 x 450 mm Iodpfx Aheuzhudjyebc More items in other sizes – new and used – can be found in our shop! International shipping costs available upon request!