Used Cetingil Sk New for sale (23,073)

Year of construction: 2025, condition: new, Roller Conveyor Shotblasting Machine Sheet, Profile and Finished Metal Product Blasting Machine: It consists of Cabin, Turbine System, Conveyor System, Recycling System, Filtration System, Control Panel and Platform. Roller Conveyor Blasting Machines consist of Metal Sheet Shot Blasting Machines, Profile Shot Blasting Machines. Material is sent to the cabin on specially manufactured roller conveyor. The surface cleaned material is ready for the next process (painting, coating, etc.) at the cabin exit. It is used in sheet, NPI, NPU, Profile blasting processes. Ideal for rusting, roughening and cleaning before painting. The cabin is made of ST-37 sheet metal and blasting zone is supported by manganese wear plates. Hardox sheets have been added to the parts of the leggings that are close to the blasting zone. The wear plate cladding is screw-in design for future wear-based replacements. The side wear plate, top wear plate, front and rear wear plates, blades, impeller, control cage, steel shot feeding elbow of the turbines on the machine are made of Ni-Hard cast iron chemical composition. CODE W x H(mm) TURBINE SK - 1 1.000 x 500 4 x Ø 300 SK - 2 1.500 x 500 6 x Ø 300 SK - 3 1.500 x 1000 6 x Ø 400 SK - 4 2.000 x 500 8 x Ø 400 SK - 5 2.000 x 1000 8 x Ø 400 SK - 6 2.000 x 1.500 10 x Ø 400 SK - 7 2.500 x 1.000 12 x Ø 400 SK - 8 3.000 x 1000 16 x Ø 400 SK - 9 3,000 x 1.500 16 x Ø 400 Ljdpfjvnrr Ajx Abzshl SK - 10 4.000 x 2000 22 x Ø 400

Condition: used, Year of construction: 2007, operating hours: 11,659 h, Internal vehicle number: MK300034 Lhedpeyzk Iusfx Abzol Available immediately at our yard in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Year of construction: 2025, condition: new, ASK - 0 Hanger Type Shot Blasting Machine; It is used for polishing sheet and metal parts which have come out of press and heat treatment, cleaning and roughening of castings, preparation before paint and rubber coating, taking forging parts to canvases and revision of old parts. (Quantity x Diameter): Ø: 800 H: 700 has 2 turbine x Ø 325mm with 6 blades The cabin is made of ST-37 sheet metal and the hot pot area is supported by Brinell or Manganese wear plate. The interior of the cabinet is covered with a rubber sheet to prevent it from being exposed to abrasion due to the sandblasting process. Rubber sheets are fixed to the cabinet with moldings. (Coating with a complete manganese armor is optionally offered to our customers.) The wear plate cladding is screw-in design for future wear-based replacements. It can be easily changed by authorized personnel in your company. Although the cabin door can be pneumatic or manual, it is designed as a winged system and 2 pieces. The cabinet door has a lock system to prevent it from being opened during the blasting process. In addition, there is a sensor or switch on the cabinet that stops sandblasting when the door is open. Lsdpfx Aovkf Agebzjhl The system consisting of rail line, suspension gear system and crane (optional) is designed to allow the material to be sanded to move easily inside the machine. Full automation panel is available. Panel materials are Siemens / Schineider brand. Machine control is provided with a 10” PLC screen.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1261, total width: 8,500 mm, total length: 24,000 mm, total height: 3,650 mm, No minimum price – guaranteed sale to the highest bidder! Two complete filling/packaging lines are for sale, consisting of the following: 2 x B&C (Bertoncello & Cecchin, Italy) pouch filling machines CV 80 DN, manufactured in 1997 2 x Latz palletizers LHP 1800 (new Siemens S7 control system in 2025) 1 x Latz stretch wrapper The lines include various roller conveyors. The machines will be dismantled in week 38. TECHNICAL DETAILS Possible sack volumes: 10, 15, 20, 45, 50, or 70 liters MACHINE DETAILS Connection power: approx. 38 kW Overall width: 8,500 mm Overall length: 24,000 mm Overall height: 3,650 mm EQUIPMENT Defect removal belts Ledpjzzn I Ajfx Abzehl Roller conveyors Latz stretch wrapper

Condition: like new (used), Year of construction: 2017, operating hours: 56 h, functionality: fully functional, total length: 1,976 mm, total width: 974 mm, total height: 1,500 mm, pressure (max.): 13 bar, noise level: 70 dB, nominal flow rate: 240 m³/h, The machine is in like-new condition with only 54 operating hours! Lhjdozzmw Njpfx Abzel Submitting a bid obligates the buyer to collect the machine on the following dates: Monday, October 5, 2026, Tuesday, October 6, 2026, Wednesday, October 7, 2026, Thursday, October 8, 2026, until 12:00 PM. The machine is already in storage. The technical data specified in the advertisement comes from a manufacturer's data sheet. The seller does not guarantee the accuracy of the data. TECHNICAL DETAILS Operating pressure max.: 13 bar Pressure setting range: 4–13 bar Volume flow: 22–66 l/s Volume flow: 1.3–4.0 m³/min Volume flow: 47–140 cfm Sound pressure level: 70 dB(A) MACHINE DETAILS Motor power: 22 kW Dimensions (L x W x H): 1,976 x 974 x 1,500 mm EQUIPMENT Elektronikon Graphic control system Oil-free, water-injected screw compressor ISO 8573-1 Class 0 VSD speed control Further technical data can be found in the attached data sheet.

Condition: like new (used), Year of construction: 2002, machine/vehicle number: 54, functionality: fully functional, pressing force: 60 t, table width: 1,100 mm, table length: 3,000 mm, The machine is in like-new condition! Submitting a bid obligates you to pick up the machine on the following dates: Monday, October 5, 2026, Tuesday, October 6, 2026, Wednesday, October 7, 2026, and Thursday, October 8, 2026, until 12:00 PM. Lhodpfxszzny Se Abzsl The machine is already in storage. TECHNICAL DETAILS Punching force: 60 t Table size: 1,100 × 3,000 mm EQUIPMENT Setup operation Automatic operation Continuous operation Wiring diagrams Operating manual

Year of construction: 2025, condition: new, Overhead Continuous Shot Blasting Machine? An overhead continuous shot blasting machine is an automatic surface cleaning system used mainly for removing rust, scale, paint, or other impurities from metal surfaces. In this system, the workpieces are suspended from an overhead conveyor line and pass continuously through a blasting chamber, ensuring high productivity and consistent quality. ⚙️ Working Principle Loading: The parts are hung on rotating hooks or hangers attached to an overhead conveyor line. Transportation: The conveyor automatically carries the parts into the blasting chamber. Blasting Process: Inside the chamber, high-speed turbines throw steel shots or abrasive media onto the surface of the parts. This removes rust, scale, burrs, and old paint layers, leaving a clean, roughened surface. Rotation of the Hanger: The hooks or hangers usually rotate to ensure that all surfaces of the part are evenly blasted. Discharge and Recovery: After blasting, the parts exit the chamber. The used abrasive is collected and recycled, while dust is filtered through an efficient dust collection system. Lsdpfoxuhf Iex Abzshl CODE W: x H: Turbine ASK-KON - 1 1.000 x 1.000 4 x F400 ASK-KON - 2 1.000 x 1.500 6 x F400 ASK-KON - 3 1.000 x 2.000 8 x F400 ASK-KON - 4 1.500 x 3.000 12 x F400 ASK-KON - 5 1.500 x 4.000 12 x F500

Year of construction: 2025, condition: new, functionality: fully functional, The Blasting room (also called a sandblasting room or shot blasting room) is an enclosed area designed for cleaning, roughening, or surface preparation of materials such as metal, concrete, stone, or wood. Inside the room, abrasive materials (like quartz sand, steel grit, aluminum oxide, or glass beads) are propelled at high speed using compressed air to remove rust, paint, scale, or dirt from the surface and achieve the desired roughness. Ledpfoxr Am Uox Abzshl Main Components of a Sandblasting Room Blasting Chamber / Room: A steel-structured enclosure with wear-resistant lining to protect the interior walls. Blasting Machine (Nozzle System): Mixes compressed air and abrasive media, then directs it toward the workpiece. Dust Collection System (Filter Unit): Removes airborne dust and maintains clean air inside the room. Abrasive Recovery System: Collects used abrasive material, cleans it, and recycles it for reuse. Operator Equipment: The operator wears protective gear, including a helmet with air supply, gloves, and a blast suit. CODE DIMENSIONS OF SANDBLASTING AREA (L x W x H) mm KO - 1 4.000 x 4.000 x 3.000 KO - 2 6.000 x 3.000 x 3.000 KO - 3 6.000 x 5.000 x 5.000 KO - 4 10.000 x 5.000 x 5.000 KO - 5 12.000 x 5.000 x 4.000 KO - 6 15.000 x 5.000 x 5.000 KO - SPECIAL 27.000 x 18.000 x 9.000

Condition: good (used), functionality: fully functional, power: 216 kW (293.68 HP), fuel type: diesel, overall weight: 24,000 kg, Year of construction: 2008, operating hours: 9,800 h, Equipment: all wheel drive, cabin, New Holland W270B wheel loader, year of manufacture 2008, approximately 9,800 operating hours, in good condition, immediately ready for use, permissible total weight 24,000 kg, transport and delivery possible, located near Lübeck, viewing possible at any time. Lhsdpozbuqlefx Abzol

Year of construction: 2025, condition: new, Drum Shot Blasting Machine; Ledpfxovliuce Abzehl The system consists of a Cabin, Turbine System, Recycling System, Filtration System, Control Panel, Platform, Hydraulic Loading-Unloading Unit, and Vibrating Screen. Shot blasting is performed by having a rubber belt wound over three drums rotate the virtual barrel-shaped chamber while the turbine propels steel shot onto the workpieces. The blasting cabin is manufactured from ST-37 steel plate. Areas directly targeted by turbines (hot points) are reinforced with manganese wear-resistant plates, while other areas are supported with Hardox plates. (Complete manganese plate cladding is optional.) Wear-resistant claddings are designed with bolts to facilitate future part replacements due to wear. Replacement can easily be carried out by your company's authorized personnel. The wear-resistant plates are bolted for easy future servicing. Dimensions of the TK - 6 PREMIUM machine: Drum diameter Ø: 1000 mm, Length between discs L: 1200 mm, with a loading capacity of 800 kg. Turbine specifications: 2 x F300 model Ø 320 mm, 7.5 kW motors. Equipped with a rubber belt conveyor.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Machine-Details Stock-No. 1022-E06190 Type of machine Planer-Type Milling M/C - Double Column Make HEYLIGENSTAEDT Type Heynumill 2700-PF Year of manufacture 2002/2018 retrofit Type of control CNC Storage location Germany Country of origin Germany Delivery time Immediately Freight basis ex foundation Technical details x-travel 3000 mm Lhjdsz D Uwgspfx Abzjl y-travel 4000 mm z-travel 1500 mm Control Heidenhain TNC 430 M total power requirement 120 kVA weight of the machine ca. 83,2 t Additional information 3/5 axes CNC portal milling machine with integrated C-axis and changeable milling heads. The machine had a purchase price of € 1.4 million in 2002. An inspection in the seller's plant under power is possible after previous appointment. Condition: The machine was overhauled in 2018, costs of over € 100.000,-. - Drives of the X-axis renewed - New hydraulic power unit - Complete electrical wiring renewed - Spindle cooling unit new - 2 pieces longitudinal conveyors new - Coolant pump new - Cover complete X-axis new - Bellows Y-axis new - Exchange measuring ruler X-axis - Fork head spindle bearing new Belleville spring assembly new Drive motor A-axis new Spindle cone ground - Overhaul milling gear (2020) Working range Travels X-axis 3000 mm Y-axis 4000 mm Z-axis 1500 mm Max. column passage 2700 mm Max. Distance between work table and spindle nose: Lower edge of ram interface min./max. 660 mm / 2160 mm Workpiece table Length 3000 mm Width 2000 mm Load 4 t/m² T-slots 28 H8 Rapid traverse X-axis 15000 mm/min Y-axis 15000 mm/min Z-axis 15000 mm/min Equipment: CNC control Heidenhain TNC 430 M Milling heads: Straight milling head type FK 120/450 Outside diameter 280 mm Tool holder SK 50 power max. 67 kW max. speed 5000 rpm Coolant supply through the spindle, via adjustable nozzles 1-axis fork-type milling head type FK 100/2D tool holder SK50 power max. 67 kW max. speed 4000 rpm swiveling range A/B axis +105°/-95° Coolant supply via adjustable nozzles Coolant tank 1.000 l Chip conveyor system Change head station Weight specifications: 1 Y-slide 7000 kg 2 ram 10000 kg 3 column 1 8000 kg 4 column 2 8000 kg 5 crossrail 28000 kg 6 Bed/table 20000 kg 7 Hydraulic power unit 1000 kg 8 Cooling unit 1200 kg 9 Coolant tank ??? Total 83200 kg

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, total height: 2,930 mm, total width: 2,210 mm, table width: 560 mm, table length: 1,000 mm, overall weight: 7,000 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, product length (max.): 2,700 mm, number of axes: 3, This 3-axis HERMLE C800V vertical machining centre was manufactured in 2000. It features a travel range of 800 mm in the X-axis, 600 mm in the Y-axis, and 500 mm in the Z-axis. The machine includes a 30-position tool changer and a spindle speed range of 16,000 rpm. If you are looking to get high-quality machining capabilities, consider the HERMLE C800V machine we have for sale. Contact us for further details. - Power (40% / 100% Duty Cycle): 15 kW / 10 kW- Rapid Traverse (X, Y, Z): 35 m/min- Coolant System: 300 L – 40 L/min at 3 bar- Operation Voltage: 400 V / 3~ 50 Hz- Control Voltage: 24 V-- Total Nominal Current: 44 A- Total Rating: 31 kVA- Electrical Drawing No.: 300.91 K 40.1- Control Unit Operating Hours: 57,705 hrs- Machine Operating Hours: 48,735 hrs- Program Run Time: 19,077 hrs- Spindle Operating Hours: 18,005 hrs- Drive On: 30,073 hrs- Axes in Motion: 17,617 hrs- Included Equipment / Accessories:- Heidenhain TS 642 touch probe system (retrofitted in 2023)- 3 Allmatic vises- Approx. 300 tool holders- 3 jaw chucks- Miscellaneous small parts- Complete machine documentation and service reports- Service History:- 2019: New main spindle fitted- 2023: Retrofitted with Heidenhain TS 642 touch probe system Lhsdpfx Absz D Tdxezol Technical Specification Taper Size SK 40

Condition: repair required (used), operating hours: 2,100 h, New Holland T6.155 tractor after rollover. Starts and drives, 2100 hours. Lodpfx Aoyl S S Usbzshl

Condition: used, Year of construction: 2006, operating hours: 10,010 h, Equipment: all wheel drive, MAKE: NEW HOLLAND KOBELCO TYPE: E135SR-1E YEAR: 2006 CE: YES WORKING HOURS: 10,010 HOURS TYRES/UNDERCARRIAGE: 60% POWER: 63 KW ENGINE: ISUZU BB-4BG Lhjdjyzliyopfx Abzol WEIGHT: 14,100 KG OPTIONS: 14,100 KG MACHINE HYDRAULIC QUICK COUPLER CLIMATE CONTROL FULL PIPING (HAMMER LINES) SORTING FUNCTION TRACKS 60% GOOD GOOD CONDITION Price is Ex VAT.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, DESCRIPTION: The KCK-1000-FCP-UC30 pressure chamber is a versatile device with a wide range of applications. It enables the following types of work: - Cleaning the surfaces of metal objects, Lhedpfjzvdfaox Abzjl - Removing: welding residues, scale, rust, oxides, surface deposits, and old paint coatings, - Deburring the edges of objects, - Achieving the desired surface roughness. Technical data: - Width: 1470 mm - Depth: 1600 mm - Height: 2140 mm - Working chamber: 950 × 880 × 880 mm - Abrasive circulation: pressure-fed - Hand openings: 2 - Nozzle: boron carbide, ø 6 mm - Weight: approx. 300 kg - Lighting: fluorescent - Abrasive tank: 30 l - Air consumption: according to the manufacturer's table

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 8,950 h, 16-ton excavator Steel tracks with rubber pads Powertilt Slope bucket Lhodpfxozzrpde Abzjl Digging bucket, 120 cm Sorting grapple for stone laying Short-tail excavator 8,950 operating hours Immobilizer VAT can be shown separately If you have any questions or require further information, please feel free to send me a message or call me.

Condition: used, Year of construction: 2009, operating hours: 11,707 h, Equipment: all wheel drive, Internal vehicle number: G300381 Available immediately at our yard in Kaufungen. More information: * Luis Lucena * Viktoria Sologubova New Holland F106.6A 6x6 All-Wheel Drive Grader | Approx. 12 Tonnes | Year 2009 Used New Holland F106.6A motor grader, manufactured in 2009. The machine features 6x6 all-wheel drive and an operating weight of approximately 12 tonnes. The grader is ideal for road construction, surface levelling, earthmoving and maintenance work. Technical details: * Manufacturer/Model: New Holland F106.6A * Machine type: Motor grader * Year of manufacture: 2009 * Operating hours: 11,707 hours * Weight: 11,500 kg * Weight class: Approx. 12 tonnes * Drive system: 6x6 all-wheel drive * Environmental badge: None * Technical inspection: New * Vehicle number: G300381 * Condition: Used * German machine Inspection possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale reserved. Note: The specifications list both 10,700 and 11,707 operating hours. The more precise value of 11,707 hours has been used for this description. Financing example: * Internal number: G300381 * Purchase price: €53,900.00 * Down payment: 10% * Term: 60 months * Monthly rate: €839.80 * Residual value: €9,980.00 If you are interested in this offer or would like to adjust it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle in part exchange. Financing is available directly with us. Lhjdpoxnulbjfx Abzjl GOLEC COMMERCIAL VEHICLES LTD. We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 5,970 h, machine/vehicle number: N6LA5823, Equipment: UVV, air conditioning, cabin, hammer hydraulics, including MH-MS21 quick coupler - Hydraulic breaker piping - Trenching and ditch cleaning bucket Lhedpfsy Amm Nex Abzol Sale in as-is condition Interim sale and errors excepted! Sale exclusively subject to our general terms and conditions (GTC) Important note – Important information: Despite careful verification of all details in our offer, errors may occur. Some of these may result from transmission errors within the various platform providers' systems. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 of the German Civil Code (BGB). Rather, it provides information to initiate contract negotiations. The information given here is without guarantee and does not constitute warranted characteristics.

Year of construction: 1974, condition: like new (used), As good as new Deckel FP1 tool milling machine overhauled by FPS with 3-axis Heidenhain digital readout , Adjustable angle table , SK 40 spindle mount. Spindle brake , accessories : Counter holder , various collets. Very good working condition, can be demonstrated under power by arrangement. Lhjdeq A Icqjpfx Abzol

Condition: like new (used), Year of construction: 2017, functionality: fully functional, working width: 1,600 mm, total length: 75,000 mm, total width: 17,000 mm, Technical Details: Cefla painting/finishing line with roller coating machines for panel finishing *Maximum working width: 1650 mm *Automatic loading system with integrated robot *Line dimensions: 75 x 17 m *Line configuration: *3 x Cefla Smartclean 32-B brush cleaning machines *3 x Cefla Smartcoater MF Evo roller coating/painting machines *1 x Cefla Smartcoater SP1 Evo finishing machine *2 x Cefla UV-R M1 1600 UV curing tunnels (1 UV lamp each) *1 x Cefla UV-R M3 1600 UV curing tunnel (3 UV lamps) Lhedpfx Absyv Hzgszsl *1 x Cefla UV-R M2 1600 UV curing tunnel (2 UV lamps) *Cefla TR500 motorized conveyor line *Cefla automatic panel turner *Costa top sanding machine with 1 roller and 1 finishing pad *Automatic loading system with 2 x ABB robots

Condition: new, Year of construction: 2025, operating hours: 7 h, Exhibition unit – immediately available: Kaeser SK 22 T - 10 bar rotary screw compressor incl. integrated refrigeration dryer incl. SIGMA CONTROL 2 controller Ljdpfxjznmp Ss Abzohl Year of manufacture: 2025 Operating hours: 7 hours Warranty: 12 months Pressure: 10 bar Rated power: 11 kW Free Air Delivery (FAD): 1.68 m³/min Noise level: 66 dB(A) Compressed air outlet: 1" Dimensions (L x W x H): 750 x 1240 x 1260 mm Weight: 387 kg Convenient leasing options via our partner bank are available for new machines. Feel free to visit our retail store. We always stock a wide selection of new and used compressors!

Condition: like new (used), Year of construction: 2018, functionality: fully functional, measuring range X-axis: 310 mm, measuring range Z-axis: 820 mm, total width: 1,850 mm, total length: 1,030 mm, total height: 2,150 mm, overall weight: 500 kg, Equipment: documentation/manual, type plate available, ZOLLER Venturion 450 tool presetting machine. The ZOLLER »Venturion 450« tool presetting machine sets new standards in modern machining. Thanks to its maximum level of automation, you can measure and preset your tools completely independently of the operator – for reproducible top quality and highly efficient processes in your workshop. Ljdjvphv Topfx Abzshl • Manufacturer: ZOLLER • Model: VENTURION 450 • Year of manufacture: 2018 • Condition: very good, fully functional • Location: Graz • Images/Videos: Images and videos will be provided upon request. _____ Your advantages at a glance: • Operator-independent precision: Fully automatic measurement sequences guarantee exact results – regardless of who operates the machine. • High-end automation: CNC axes, automatic focus and a precise rotary encoder take the work out of your hands. • Tool clamping in perfection: The high-precision »ace« spindle clamps any tool securely at the touch of a button using force actuation and in a universal manner. • Intuitive operation: The combination of image processing »pilot 4.0«, a high-resolution industrial camera and the large 24" monitor makes tool measurement extremely easy and detailed. • Maximum flexibility: Whether directly next to the CNC machine, centrally in the workshop or in state-of-the-art production cells – the system adapts to your environment. • Ergonomic & well-designed: A robust foil keyboard controls spindle clamping, brake and indexing. The included thermal label printer ensures immediate and error-free labeling of your tool parameters. _____ Technical data: Measuring range Z: 450 mm / 620 mm / 820 mm Measuring range X: 210 mm / 310 mm Max. tool Ø: 420 mm / 620 mm Bore gauge Ø: 100 mm Length: 1,030 mm Width: 1,850 mm Height: 2,150 mm Weight: approx. 500 kg Software and camera: ZOLLER image processing »pilot 4.0« and industrial HD camera Scope of delivery: • ZOLLER VENTURION 450 + PC, software and printer • Adapter for SK 40 / VDI 40 / VDI 50 • Complete manufacturer documentation Contact and inspection: The machine is in excellent condition. An inspection while powered on is possible after prior arrangement.

Condition: excellent (used), power: 150 kW (203.94 HP), fuel type: diesel, color: yellow, Year of construction: 2012, operating hours: 4,237 h, Year of manufacture: 2012 Drive: Wheeled Number of cylinders: 6 Unladen weight: 17,000 kg Working width: 427 cm Technical condition: Very good Optical condition: Very good NEW HOLLAND RG 200 B MOTOR GRADER + RIPPER, YEAR 2012, 4,237 HOURS Drive: 6x4 Engine: 6-cylinder turbo diesel Net power: 200 HP (150 kW) @ 2,200 RPM Operating weight: 35,274 lbs (16,000 kg) Blade length: 14 ft (4.27 m) Max. blade lift above ground: 17.7 in (450 mm) Max. blade drop below ground: 28.5 in (725 mm) Hydraulic flow: 34.3 GPM (130 L/min) Transmission: Full powershift, 6 forward / 3 reverse gears Turning radius: 24 ft 3 in (7.4 m) Travel speed (forward/reverse): 28 mph (45 km/h) / 19 mph (30 km/h) Lhsdpsw Hqb Ssfx Abzjl FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS AND MACHINES FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH WE SPEAK SPANISH

Condition: new, Year of construction: 2025, Exhibit available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer Lsdpszh Hwijfx Abzohl Pressure: 10 bar Nominal power: 15 kW Delivery rate: 2.11m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 Visit our store. We always have a large selection of new and used compressors in stock!

Condition: good (used), Year of construction: 2016, 2x screw compressors, Kaeser, 10 bar, with integrated refrigerant dryer, compressed air tank, SIGMA AIR MANAGER 4.0 control system – used: Price per compressor, ex-works: €5,950 (net), dismantled, packaged, and loaded! Price for the compressed air tank, ex-works: €1,450 (net), dismantled, packaged, and loaded! SIGMA AIR MANAGER 4.0 main control system, price ex-works: €2,500 (net)! Price for the complete system (2x compressors, 1x compressed air tank, 1x SIGMA AIR MANAGER 4.0 control system) = only €13,500 (net)! Manufacturer: Kaeser Type: SK 25 T Year of manufacture: 2016 Serial No.: 7201 Material No. SK.2 Operating hours: unknown, will be provided later Rated power: 15.0 kW Motor speed: 2,960 1/min Max. operating overpressure: 11.0 bar Dimensions (according to manufacturer's data sheet) W x D x H (mm) 750 x 1240 x 1260 Option K1 T2 C3 Option K1: Special coolant filling Option T2: Transformer / voltage adjustment Option C3: Connection of the control system (Sigma Control 2) to higher-level control or remote monitoring systems SIGMA AIR MANAGER 4.0 main control system: Control of compressed air stations – for optimum efficiency. Adaptive, efficient, and networked – with the SIGMA AIR MANAGER 4.0, demand-oriented compressed air management gets a new name. The compressed air management system controls the operation of several compressors as well as dryers or filters with unprecedented efficiency. Ledjzbyd Rspfx Abzshl Compressed air tank (data still to be verified) Kaeser, 1000L, max. operating pressure: 11 bar Condition: good Available: from Q4/2026 Location: Hamburg