Used Centrifugal Fan 0.37 Kw 2800 Rpm for sale (43,092)

Condition: used, Radial fan, low pressure fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Elektror, radial fan low pressure fan type D-06/S 484 Lodpjuqf Iljfx Abzjhl -Volume output: 10 m³/min -Fan wheel: Ø 170 x 90 mm -Speed: 2800 rpm -Inlet: Ø 105 mm -Air duct connection: 110 x 110 mm -Dimensions: 410/280/H365mm -Weight: 12.3 kg

Condition: good (used), Centrifugal fan, Fan, 75 kW Fan, Used machine Overall dimensions : 2030 x 1750 x 1490 mm Air flow rate : 50 760 m3/h Lhjdpfx Abeua Eu Njzel

Condition: used, electric motor, three-phase motor -Handover: in its current condition as inspected Lodpfx Ajv N U Trsbzjhl -Drive shaft: Damage, see photos Manufacturer: B

Condition: good (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation blower, exhaust gas extraction, dust extraction blower, dust blower -Fan: centrifugal fan Ø 285 mm -Motor: ABB 0.55 kW -Speed: 2820 rpm -Fan wheel: Ø 285 x 20 mm Lhsdpfx Aozulfrsbzel -Inlet: Ø 110 mm -Air duct connection: Ø 75 mm -Dimensions: 400/350/H380 mm -Weight: 12.4 kg

Condition: like new (used), 1 pc. Dassler high-pressure centrifugal fan is for sale single inlet with sheet steel housing with the following performance parameters: condition: new, unused type: DCAS-852-2T-10 suction: DN 280 Lhsdpfx Aboyx Tbrezjl power: 7.5 kW air volume: approx. 4300 m3 / h speed: 2800 rpm air temperature conveyed: -20 to + 120 ° C motor: insulation class F / protection class IP55

Condition: used, radial fan 2.2kw 5500m3/h supply fan VanDIJK radial fan air transport approx. 5500m3 stainless steel impeller. plastic housing direct drive Lodpfxeufiz Re Abzshl motor 2.2 kw 380/220v revolutions: 2830/min pressure side pipe diameter: 250mm suction side pipe 200mm

Condition: used, Three-phase motor, electric motor -Manufacturer: Elektror, electric motor for radial fan type D-06 / S484 -Power: 0.5 kW Ljdeupbc Aopfx Abzohl -Speed: 2800 rpm -Shaft: Ø 14 x 35 mm -Protection class: B TROP -Dimensions: 295/200/H150mm -Weight: 6.5 kg

Condition: used, Radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, , , ventilation fan, blower -Fan: centrifugal fan exhaust fan -Type: unfortunately without type designation -Voltage: 380V/3ph. / separate windings -Speed: 550 / 750 rpm Ljdpjq Dau Tsfx Abzehl -Inlet: Ø 220 mm -Air duct connection: 190 x 145 mm -Dimensions: 410/380/H190 mm -Weight: 10 kg

Condition: used, Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Bossler, radial fan -Type: unfortunately no exact type designation, see photo -Speed: 2820 rpm -Power: 0.55 kW -Protection class: IP 54 Lhjdpfx Abouncyaszel -Connection input: Ø 155 mm -Dimensions: 300/280/H300mm -Weight: 10.4 kg

Condition: good (used), electric motor, three-phase motor -Electric motor: type T 71A 2 AB3 -Power: 0.37 kW -Speed: 2820 rpm Lhedpfjv Hzmyox Abzjl -Shaft: Ø 14 x 30 mm -Protection class: IP 54 -Dimensions: 245/140/H170 mm -Weight: 5.8 kg

Condition: excellent (used), I offer robust centrifugal fans (blowers) in excellent condition – equipment is virtually unused. Perfect for industrial applications, ventilation, extraction, filtration systems or workshop installations. ⚙️ Technical data (from the nameplate) Power: 0.75 kW (1 HP) Supply: 3-phase 200/400V Frequency: 50 Hz Speed: ~1395 rpm Protection rating: IP54 Motor type: TECO 3-phase induction motor 📏 Dimensions (approximate) Inlet diameter: approx. 24–25 cm Construction: steel housing + metal impeller ✅ Advantages Lsdpfx Abeyypgtjzshl ✔ condition very close to new ✔ solid industrial build quality ✔ efficient 3-phase motor ✔ compact size ✔ ideal for dust, chip extraction, and ventilation systems - PRICE INDICATED PER UNIT.

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan, fume extractor Lsdpjzcvw Nsfx Abzjhl -Manufacturer: Exhausto Exodraft, smoke extractor -Type: RS -Motor: 0.03 kW 1350 rpm -Inlet connection: Ø 280 mm -Dimensions: 360/360/H290 mm -Weight: 11.7 kg

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Lodpozw Ucxsfx Abzjhl Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Lhedpfxszw Ug Ro Abzsl Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 1987, condition: used, Gear motor, electric motor, three-phase motor, electric gear motor Lhodpfx Abjiidriszsl -Gear motor: from automatic cutting machine Bierrebi TA 103 -Manufacturer gearbox: Bonfiglioli type MVF 62/P -Speeds: approx. 97 rpm i= 1:15 -Manufacturer engine: Electro Adda type FC 715 -Power: 0.37 kW / 1450 rpm -Shaft: Ø 30 x 15 mm -Protection class: IP 54 -Dimensions: 485/143/H190 mm -Weight: 19.7kg

Condition: used, Gear motor, electric motor Ljdpfsclnk Dsx Abzehl -Speed: 0.49 rpm -Power: 0.37 kW -Construction: B5 angle -Diameter shaft: Ø 60 mm -Protection class: IP 54 -Dimensions: 740/380/H410 mm -Weight: 133 kg

Condition: ready for operation (used), Centrifugal Fan, Fan, Fan 5.5 kW, Used Machine Overall dimensions: Length: 1710 mm Width: 1440 mm Ljdpfsvcax Hsx Abzjhl Height: 1660 mm Weight: 400 kg Electrical data: Voltage: 400V Current: 13.3A Power: 5.5 kW Motor specifications: Manufacturer: AEG Type: AMV 132 MV4/8 Blade dimensions: Diameter: 500 mm Width: 230 mm

Condition: used, Centrifugal fan, 18.5 kW, used machine Overall dimensions: 1680 × 1650 × 1260 mm Weight: 457 kg Electrical data: 400 V; 18.5 kW; 34 A Ljdpfjyzypnex Abzshl Calculated air flow rate: 11,800 m³/h Calculated pressure: ~4500 Pa, 3.96 kg/s

Condition: new, For sale: professional MOTEK electric motor with brake. Brand-new unit, warehouse stored, never installed. Italian production – very high manufacturing quality. Lhjdpfx Abeyvadmszel The motor is fitted with an electromagnetic brake – ideal for industrial applications, machinery, conveyors, pumps, and drives. Technical specifications: Manufacturer: MOTEK Model: ET90SLa-2 Power: 3 kW RPM: approx. 2800 Voltage: 230 / 400 V Frequency: 50 Hz Current: 11.9 A / 6.9 A Power factor (cos φ): 0.81 Brake torque: 7 Nm Brake supply: 103 VDC / 230 VAC Duty cycle: S6 40% Weight: approx. 16.2 kg Country of manufacture: Italy Condition: New, warehouse stored Possible minor signs of storage

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 3.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 60 mm -Protection class: IP 44 Ledpfx Ajckd Emsbzohl -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 127 kg

Condition: good (used), Geared motor, electric motor, electric geared motor, spur geared motor Manufacturer: Nord, geared motor -Gearbox: Type SK12-71 L/4 i= 31.19 -Speed: 45 rpm -Engine: Nord type SK 71 L/4 Ljdpfx Asy Tka Ijbzehl -Power: 0.37 kW -Protection class: IP54 -Shaft: Ø 25 x 50 mm -Dimensions: 455/190/H170 mm -Weight: 16.4 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Manufacturer gearbox SEW type: R72-43-V01 -Manufacturer motor SEW type: VUF1DT80K-6 -Motor power: 0.37 kW -Speed range: 1.2-6 rpm -Motor: adjustable -Drive shaft: Ø 40 mm -Construction: B3 Lsdoc Nnaxopfx Abzjhl -Number: 2 motors available -Price: per piece -Dimensions: 700/230/H410 mm -Weight: 70 kg

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 6 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 675/260/H245 mm Lhodpfx Aocpnl Asbzsl -Weight: 47 kg

Condition: used, Electric motor, three-phase motor -Manufacturer: Siemens-Schuckertwerke, electric motor type 1LA2026-4AB -Power: 0.37 kW -Speed: 1360 rpm -Shaft: Ø 14 x 30 mm -Design: B3 -Protection rating: P33 Tropical proof -Dimensions: 233/140/H180 mm Lhedpfjrgtfkjx Abzel -Weight: 6.0 kg

Condition: excellent (used), Fan, blower, duct fan, duct radial fan -Manufacturer: Helios, duct fan type KD 355/6/70/40 Lsdpfx Abezrk Nwszohl -Power: 1.63 kW 806 rpm -Fan wheel: Ø 360 mm -Number: 2 fans included -Price: per piece -Dimensions: 740/785/H475 mm -Weight: 43 kg/pc.