Used Cemp S9 for sale (261)

Condition: like new (used), Year of construction: 2021, machine/vehicle number: B440, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, rotational speed (max.): 300 rpm, rotational speed (min.): 60 rpm, Equipment: CE marking, rotational speed infinitely variable, OMAC B440 3600 VX Hygienic Rotary Lobe Pump Unit – Fully ATEX Rated – 2021 Complete hygienic rotary lobe positive displacement pump unit by O.M.A.C. S.r.l. (Italy), professionally decommissioned from an INEOS manufacturing facility. Fully matched ATEX drivetrain — pump, gearbox and motor all Category 2G (Zone 1) rated, suitable for installation in hazardous area environments. Suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Ready to install. Pump: Manufacturer: O.M.A.C. S.r.l., Italy Model: B440 3600 VX Dwodpfx Aljzmgdao Ajc Year: 2021 Wetted parts: AISI 316L stainless steel Connections: 4" (DN100) hygienic tri-clamp ATEX: II 2G Ex h T4 Gb Gearbox: Motovario HR 101M helical reducer Ratio: i = 4.88 Torque: 530 Nm ATEX dual-rated Motor: Cemp E3AB70 132M-4 — 7.5 kW 400V Δ / 690V Y, 1462 rpm ATEX: Ex db IIB T4 Gb IP55, IE3 efficiency Inverter-rated (S9 variable speed duty, PTC 120°C thermal protection) Pump shaft speed approx. 300 rpm at 50Hz (approx. 60–300 rpm range on inverter) Complete unit mounted on a stainless steel baseplate with forklift access. 3 identical units available — matched factory batch with consecutive serial numbers across pump, gearbox and motor. Price is per unit. Condition: New other. Excellent, clean condition throughout — see photos. Inspection welcome prior to purchase. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: used, Electric motor, three-phase motor -Power: 0.18 kW Dedpofh Iw Djfx Al Aowc -Speed: 3000 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 -Dimensions: 290/165/H220 mm -Weight: 16.7 kg

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 669604, overall weight: 1,192 kg, load capacity: 120 kg, arm reach: 3,500 mm, controller manufacturer: kuka, controller model: fives Cinetic 15A81-02, teach pendant manufacturer: kuka, teach pendant model: 00-168-334, control cabinet width: 1,100 mm, control cabinet height: 1,910 mm, input voltage: 400 V, input current: 16 A, type of input current: AC, repeat accuracy: 0.06 mm, warranty duration: 6 months, The KUKA robot has been meticulously serviced by KUKA and was last operated in 2024. Its full machine operation was successfully tested prior to removal from a automotive site in 2026. Complete with all relevant cables, pendant, accessories and end of arm tooling. Dodpfxey R Aice Al Aowc Versatile, streamlined, powerful and robust – those are the typical characteristics of the KR QUANTEC series, the best-selling robot series from KUKA. We have 2 available.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Robot Hitbot S922 Cobot, used for collaborative applications, only for testing purposes. Year of manufacture: 06/22 Number of axes: 6 Max. payload: 5 kg Max. working range: approx. 922 mm Scope of supply: Robot, controller, cables Used item – shows normal signs of wear. Further details, article numbers and images available upon request. Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. The item can be shipped within Germany for €95. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city and postal code. Freight costs upon request – please specify the delivery address. Dwjdpfx Alez I N Uue Asc

Condition: ready for operation (used), Year of construction: 1993, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 470 mm, spindle speed (max.): 1,680 rpm, spindle speed (min.): 30 rpm, overall weight: 1,700 kg, input voltage: 440 V, Huron J2 Milling Machine Excellent running condition Table size 1050 x 350mm Longitudinal traverse 750mm Cross Traverse 500mm Vertical Traverse 470mm Spindle Taper Int 40 Spindle speeds 30-1680rpm 3phase 400v Motor 4kw Dodpez Ix Eisfx Al Aswc 3 Axis DRO X, Y & Z Axis Coolant pump & system Weight 1700kg

Condition: excellent (used), Year of construction: 2019, operating hours: 23 h, functionality: fully functional, overall weight: 52 kg, load capacity: 4 kg, arm reach: 920 mm, Load capacity: 3.7 kg • Reach: 920 mm • Repeatability: ±0.02 mm • Maximum Cartesian speed: 11.1 m/s • Protection class: IP65 (wrist IP67 with optional compressed air unit) Dsdpoz Hdzgefx Al Aowc • Safety: Integrated safety functions (Safe Speed, Safe Stop, Safe Zone) with optional SIL3 / PL e certification • Design: Compact, modular design with front access for connections and modules. • Models: Available in various versions such as CS9 SE, LP, MP, and HP (depending on performance and size requirements). • Energy efficiency: Lower energy consumption compared to previous generations, as well as energy recovery during axis deceleration. • Software: Supports VAL3, uniVAL plc/drive, and VAL Blocks. Application areas • Electronics and pharmaceuticals • Cleanroom environments (up to ISO Class 2) • Medical and laboratory technology (e.g., as a MedX Ready version for surgical and medical applications)

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: A-6.3240, Complete 2019 Wienstroth Fixture Heat Treat/Quenching Line. Furnace Temperature Max 880 Deg C, 480kW, Heating Zones: 4, Power Supply Voltage: 460/60 Volts/Hz. Refer to attachments for further equipment specs & drawings. Line to include: High Temperature Furnace w/ Material Conveyers Overhead Crane & Hoist System Quenching Bath w/ Heat Exchanger, Pumps and PLC Washing/Rinsing Station, 2 Zone, TPS & Entrance Conveyer Assembly Transfer Conveyer System, Material Handling Assembly w/ Tracks Low Temperature Temper Furnace w/ Cooling Conveyer & PLC Quenching Line PLC Controller Power Distribution Cabinets, Rittal/Wienstroth Dwjdpfx Aljz Hb S As Aec 24x Pallets Quenching Line Tooling

Condition: used, Year of construction: 2020, machine/vehicle number: 931/20 TS90, functionality: fully functional, operating hours: 50 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, cutting width (max.): 4,300 mm, overall weight: 3,500 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, We offer this used Macmazza TS90 Beam Saw, year of construction 2020. Manufacturer: Macmazza Model: TS90 Year of construction: 2020 Condition: used Category ID: 1426 Type ID: 844 Type: Beam Saw 2020 MACMAZZA TS90 4300 × 4300 CNC BEAM SAW – ONLY 28 HOURS OF ACTUAL WORKING TIME Price: €49,900 net – negotiable An exceptional opportunity to purchase a 2020 Macmazza TS90 automatic horizontal CNC beam saw with extremely low operating hours. The machine was originally supplied in the United Kingdom as an ex-demonstration machine and has subsequently seen very limited use in our bespoke joinery workshop. It is in excellent condition, fully operational and currently installed. RECORDED OPERATING DATA • Total Hours Machine in Operation: 49 hours 46 minutes • Total Hours Machine in Working: 28 hours 31 minutes • Total Saw Blade Cutting Distance: 571.5 metres • Total Production Recorded: 129.6 m³ All operating data can be verified directly through the machine’s control system. TECHNICAL SPECIFICATION • Manufacturer: Macmazza • Model: TS90 • Year of manufacture: 2020 • Serial number: 931/20 • Cutting length: 4,300 mm • Pusher stroke: 4,300 mm • Maximum cutting height: 90 mm • Installed power: 15 kW • Power supply: 400 V, 50 Hz, three-phase + N + PE Dedpfxszzdyzj Al Aswc • Control voltage: 24 V DC • Full-load current: 30 A • Machine weight: 3,500 kg • Computer-controlled operation • Integrated cutting optimisation software • Automatic rear pusher • Pneumatic grippers • Scoring unit • Air-float front supporting tables • CE marked ADDITIONAL ORIGINAL MACMAZZA GRIPPER The machine has been upgraded with an additional genuine Macmazza pneumatic gripper, supplied and professionally installed through R&J Machinery. The additional gripper and professional installation cost £2,685.90 + VAT. Supporting invoice available. CONDITION AND INSPECTION The machine is in excellent condition and has completed only 28 hours and 31 minutes of actual working time. It is currently installed and can be inspected and demonstrated under power by prior appointment. Further photographs, videos, operating-hour records, original documentation and invoices are available upon request for serious enquiries. LOCATION AND COLLECTION Located in Perivale, West London, United Kingdom. Sale terms: EXW – Ex Works. Dismantling, loading, transport and recommissioning are the responsibility of the purchaser. PRICE €64,000 net – negotiable Serious enquiries only. Please contact us to arrange an inspection or request further you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2004, functionality: fully functional, REF: MM6444 Cimec America AM DPS 9-8-1C-1VA rinser, filler and capper monoblock. Manufacturer: C.I.M.E.C., Italy. Serial number 045, built 2004. CE marked, with EU Declaration of Conformity. A compact monoblock with 9 rinsing nozzles, 8 isobaric (counter-pressure) filling valves, a crown capping head and a ROPP capping head, for still or carbonated drinks in glass bottles. Carbonated product needs to be carbonated before filling. The machine does not include a carbonator. Filling Single pre-evacuation with CO2 bottle purge (not double pre-evacuation) No vacuum pump fitted Up to 2,000 bottles per hour (owner's figure), depending on bottle size and product Capping ROPP (screw cap) head enabled, set up for 28mm ROPP caps on MCA bottle finish Crown capping head disabled. The current owner never used it and its condition is unknown. An engineer would need to assess what is required to bring it back into use Change parts 330ml, currently fitted 200ml Not included Conveyors, drive or accumulation table CIP system Also included Dedpey Um Anjfx Al Aswc Spare seals, wear parts and spares for the filling heads, pedestals, rinser and drive train Spare parts list Condition Last in production in August 2025, when it was fully operational. Now in storage. The owner describes the machine as well used and in working order, but needing an engineer to get it fully up to speed. Videos of it running are available on request. Electrical 400V, 50Hz, 3-phase, 4.5kW Dimensions Approx. 3.5m long x 1.4m wide x 2.1m high (2.6m at the capper) Weight: to be confirmed. Documentation EU Declaration of Conformity and operator manual (English) for this serial number. Location Aylesbury, UK. (in storage) Viewing by appointment

Condition: ready for operation (used), functionality: fully functional, total length: 3,000 mm, total width: 1,500 mm, total height: 1,750 mm, spindle speed (max.): 2,300 rpm, spindle speed (min.): 1 rpm, type of input current: three-phase, overall weight: 1,800 kg, The lathe runs and operates very well. A video of the machine in operation can be sent upon request. Dwjdoz Dlbispfx Al Asc In addition, all possible manuals for this lathe are included. Damage: - A piece has broken off the tool holder, but this does not affect the operation. One connector on the rear is broken and needs to be replaced.

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, Mikron UMS 900 with internal coolant system and 4th axis Considering its age, the machine is in good condition and fully functional. A special feature is the machine’s internal coolant system and full-fledged 4th axis. In addition, it has an HF spindle from Fischer with a cooling unit that can be swiveled into position. Equipment: - X-axis 900mm / Y-axis 630mm / Z-axis 500mm - Table dimensions: 1200x600mm - Internal coolant system through the spindle - Spindle speed max. 6300 rpm with SK40 - 4th axis as a rotary table, Hoffmann RWC 160 with jaw chuck - Tool changer for SK and HSK tool holders - HF spindle Fischer 42,000 rpm with HSK40 - Electric handwheel - Full protective enclosure - Complete documentation available - Control cabinet very clean - Many tool holders included The screen is not defective; the black shadows are due to the photography. Several components have already been renewed, e.g., the spindle bearings; the Y-axis has been overhauled. The absolute special feature is the internal coolant supply through the spindle! If you have any questions or need more information, please send us a message or call us. Dedpfx Alsz Iz I Hj Aowc

Condition: used, mileage: 580 km, power: 66 kW (89.73 HP), first registration: 05/1962, fuel type: diesel, number of seats: 22, gearing type: mechanical, color: beige, Year of construction: 1962, Available in multiple colors (yellow/red/green), built between 1957 and 1964. We also have 8 restoration projects ready to start immediately. Features: 8 sleeping seats or 20 seating capacity * Double tour guide seat * Large club lounge for 8-seat configuration Length: 6,650 mm Width: 2,250 mm Permissible total weight: 6,200 kg Complete restoration Henschel engine Steering wheel manual transmission Roof luggage rack German historic (H) registration, passenger coach - Rental for your event possible. Europe-wide delivery available with our vehicle transporters. Dodpfxezyx Nzj Al Aewc We have a wide selection of classic Setra buses: S6, S7, S9 to S14, Mercedes O 319 and O 3500, Saurer bonnet buses. We make shipment worldwide. Net price: 165,000.00 Euro

Condition: excellent (used), Year of construction: 2019, operating hours: 366 h, functionality: fully functional, overall weight: 52 kg, load capacity: 4 kg, arm reach: 920 mm, • Payload: 3.7 kg • Reach: 920 mm • Repeatability: ±0.02 mm • Maximum Cartesian speed: 11.1 m/s Controller: • Protection rating: IP65 (wrist IP67 with optional compressed air unit) • Safety: Integrated safety functions (Safe Speed, Safe Stop, Safe Zone) with optional SIL3 / PL e certification • Design: Compact, modular with front access for connections and modules. Dwedpfx Aloz Hdnys Ajc • Models: Available in various versions such as CS9 SE, LP, MP and HP (depending on performance and size requirements). • Energy efficiency: Lower energy consumption compared to previous generations, as well as energy recovery during axis deceleration. • Software: Supports VAL3, uniVAL plc/drive and VAL Blocks. Application areas: • Electronics and pharmaceuticals • Cleanroom environments (up to ISO Class 2) • Medical and laboratory technology (e.g. as a MedX Ready version for surgical and medical applications)

Condition: used, mileage: 364,044 km, power: 80 kW (108.77 HP), first registration: 02/2011, fuel type: diesel, next inspection (TÜV): 10/2028, color: white, gearing type: mechanical, emission class: euro4, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * €7,900.00 net * Mercedes-Benz Sprinter 311 Cdi Maxi L3H2 Tribus, 9 seats, wheelchair lift, air conditioning, Euro 4 * Seats (8+1) * Tribus conversion * 6-speed transmission * Radio/CD player * Driver airbag * USB * Electric windows * Electric mirrors * Central locking * Automatic climate control * ABS * ESP * Wheelchair lift, 400 kg capacity * Wheelbase 433 cm * Unladen weight 2631 kg * Payload 869 kg * Permissible total weight 3500 kg * Passenger vehicle registration * Vehicle No. 16 OPENING HOURS Monday - Friday from 09:00 to 17:00 (by appointment...) CONTACT DETAILS Telephone: WhatsApp E-mail: Transit and customs registration plates (export number) available. Errors, typos and prior sale excepted. Technical specifications and features are subject to separate verification. The condition as per the contract is only what has been inspected on-site and confirmed in writing at the time of purchase. Please schedule an appointment. Dwedpez I Ib Hsfx Al Asc

Condition: like new (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 85 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 2,000 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, Turning diameter in gap: 785 mm, Huvema HU560 x 2000 Gap Bed Centre Lathe Year 2011 , CE Rated Spindle Speeds 25-1600rpm Distance Between Centres 2000mm Djdozfguiepfx Al Ajwc Swing Over Bed 560mm Swing Over Cross Slide 355mm Tail Stock MT5 2 Axis Newall DRO Quick Change Tool Holder With Holders D1-8 Camlock Chucks Excellent Condition Interlocked Guards Work Light & Coolant System Machine Comes With: 3 Jaw Chuck & Reverse Jaws - 300mm 6 Jaw Chuck - 300mm 4 Jaw chuck - 400mm Faceplate - 450mm Fixed Steady x 2 Travelling steady Fully Serviced And Ready For Production

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, IQF BERRIES FULL CLEANING-PACKING LINE EQUIPMENT FOR SALE All in good working condition serviced and prepared for work. Capacity 1500kg per hour depending on raw material. Previously used for cleaning and packing IQF Wild Bilberries, Lingonberries, Cranberries. Possible to adjust line also for other cultivated berries (red, black currants, sea buckthorns and others). Line consists of 18 different equipment units. Video is also available on request. 1. Container tripler – MEGA 2013 2. Bunker hopper with breaker – MEGA 2013 3. Vibration sieve for bunker – MEGA 2013 4. Screw conveyor – MEGA 2013 5. Air separator – JAM 2009 6. Stalk removing machine – JAM 2009 7. Polishing machine – JAM 2009 8. Screw conveyor – JAM 2009 9. Vibration sieve with ventilator 10. Vibration table for spreading berries 11. Laser Sorter BEST (Tomra) LS9000 with EOS upgrade 12. Air compressor for laser sorter - M-Press - 2106 13. Belt conveyor for manual inspection 14. Cassel X-ray Scanner 2020 15. Lifting conveyor Dwedpfxozy Rcge Al Ajc 16. Dosing machine – MEGA 2013 17. Roller conveyor with control scale – MEGA 2013 18. Metal detector – Mesutronic 2013

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 467334, Manufacture year 2010 Machine specifications: - Push infeed, max. length 6300 mm - Automatic length measuring and chalk reader - Cutting width 40 – 420 mm - Cutting height 15 – 170 mm - Min. cross section 20 x 10 mm - Max. cross section 270 x 170 / 410 x 30 mm - Motor 13.5 kW - Total electrical load approx. 22 kW -Operating pressure approx. 8 bar - Saw blade diameter 630 mm / bore 30 mm Consisting of: 1. Cross chain infeed system 8 pc. chain transport with 3 latch rows 2. Push infeed system with liftable pusher Infeed length 6300 mm, length detecting and chalk reader Dwodpfx Aljypvdie Aec 3. OptiCom Direct controller 4. Opticut cross cut saw unit S90 XL With side pusher and waste gate 5. Outfeed transport belt

Condition: used, all stainless steel water circulation net belt length 9.000 mm net belt width 900 mm adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 11.500 x 1.600 x 3.000 mm + "IGEFA" tube heat exchanger Type 161U-159-159 380 kW Dwedpfxjz I N Sts Al Ajc + Conveyor belt with flights belt width: 800 mm distance between flights: 190 mm height of flights: 50 mm

Condition: excellent (used), Year of construction: 2023, input voltage: 240 V, overall weight: 35 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, Equipment: documentation/manual, We offer this used Keyence IM8030 measuring system, year of manufacture 2023. Manufacturer: Keyence Dwodpfszzyaqox Al Aoc Model: IM8030 Construction year: 2023 Condition: used Category ID: 404 Type ID: 2224 Type: measuring system If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2015, Elro DBKGN33-EDS90 Bratt pan Dodpfx Alez Dxn Nj Aewc 2015, multifunctional pressure pan, stainless bratt pan, 164L capacity, tilting to discharge, adjustable controls, 3ph

Year of construction: 2011, condition: good (used), Description Brand Copeland Model MC-S9-ZB56KE ID 7203 Status Active Year of manufacture 2011 Location Oradea (RO) Air cooled condenser Copeland MC-S9-ZB56KE manufacture in 2011. Copeland model D3DA4-75X-AWM compressor, manufacture in 1998, 3 cyl., suction capacity 32.2m3/h. Max. pressure: 28/22.5 bars. Complete switchbox. ExWorks. Price is negotiable. Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. Hablamos Español. Beszélünk magyarul. Dsdpfedypicjx Al Aswc Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 02.086.00, pressing force: 40 t, For sale is a try-out press (spotting press) from manufacturer REIS with a maximum pressing force of 40 t. The machine features a table size of 1,280 × 900 mm, a maximum installation height of 1,035 mm, and a stroke up to 1,100 mm, making it suitable for spotting, adjustment operations, and tool modifications in mould and tool making. ##### Technical Data & Information: Spotting Press – 40 t – 1,280 × 900 mm ==== General Details - Design: 4-column press - Manufacturer: REIS - Year of manufacture: 1984 - Press force: 40 t (adjustable) - Return force: 20 t - Distance between columns: 930 × 705 mm Djdpfxoy Ec H Rj Al Ajwc - Max. installation height: 1,035 mm - Table size: 1,280 × 900 mm - Overall dimensions (W x D x H): approx. 3,800 × 1,850 × 3,600 mm - Total weight: approx. 9,000 kg - T-slots: DIN 650 – 18 mm ==== Hydraulic Cylinder - Stroke: 0–1,100 mm (adjustable) - Cylinder diameter: Ø 160 mm ==== Hydraulic System & Drive - Flow rate: 24 l/min - Operating pressure: 200 bar - Motor power: 9.5 kW ==== Movement System - Ram swivel unit: approx. 175° - Extendable table: yes - Table ejector: available ==== Controls - Operation: Control panel - Additional function control: Oil ports for core pulls (2 units) ==== Safety - Mechanical anti-drop protection ==== Electrical Connection - Main supply: 400 V AC - Fuse protection: 35 A - Frequency: 50 Hz - Connected load main motor: 9.5 kW ##### Areas of application: spotting, adjustment, toolmaking, mould making, plastics engineering, automotive, maintenance (spotting press, try-out press, test press, hydraulic press, 40 t press, 40 tonne press, 4-column press, tool adjustment press, tryout press, tool try-out press) Are you looking for a hydraulic press tailored to your specific application? Contact us for a customised quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements as they fully comply with the national Brazilian safety guideline NR 12, which builds on these standards. Our core strength lies in custom machine construction and press automation. We supply bespoke hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses predominantly utilise components from leading European manufacturers.

Condition: good (used), Year of construction: 2006, functionality: fully functional, STENNER MHS9 MK2 HORIZONTAL RE SAW LINE. This complete 9 head line comes with 12 metre infeed and 8 metre outfeed. Tilting heads which are ideal for Feather Edge board production 915MM diameter wheels Max width blade 100MM Saw speed 35M/S Max width timber 305/450MM Max height 305MM Main motors 9x 18.5KW Variable feed speed 15-60M/MIN Operator control station Also if required we have a Systems TM rotary auto stacker which is avaliable at extra cost All nine heads have new upgraded power feed wheels with sprockets, chain tension rollers and alloy blade guides for improved faster production. All guards have new sawdust exhaust outlets for added fire protection. Comes with 80% of orginal dust extraction trunking and operator cross over steps. All additions/improvements costing over 20k GBP. Comes with blades. It does not come with the cross transfer deck shown in video Production of 1.8m long Feather Edge boards is circa 36 m3 sawn per hr. This is a serious piece of equipment for large volume production and it is uncommon for a such machinery to come onto the market for sale. To be collected by customer from site Northamptonshire UK. Crane lorry essential Dodpfxszwh Hws Al Aewc Offers in excess of £80,000 GBP

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 110001, For sale: SACEM drilling and milling machine for machining large parts. The machine is fully functional and is currently used in production – primarily for finishing operations. The machine is particularly suitable for machining large, unwieldy parts. Weight: 10 t Voltage: 380 V, 50 Hz Connected load: 20 kW Compressed air: 3.5 - 6 bar Spindle speed: 4 - 1600 rpm Feed rate: 3 - 2500 mm/min Tool holder: SK40 Drilling depth / spindle travel: 800 mm Travel ranges: x: 900 mm y: 900 mm z: 1200 mm Clamping area: 1000 x 1200 mm Max. workpiece weight: 4000 kg Accuracy: 0.02 mm Please note: Dwodpfoxbn A Tox Al Aec The machine has already been disassembled and is ready for loading onto a truck in an open area. Various tool holders and clamping devices are included as accessories. If you are interested, we can send you photos. Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users / manufacturing companies (no resale to dealers) – corresponding company profile required. • Sale only within Germany or the EU. Sales / transfer conditions: • Disassembly, removal, and transport are the responsibility and at the risk of the buyer. • The buyer is responsible for personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to your reply so that we can discuss the further details directly.

Condition: refurbished (used), Year of construction: 2007, Description Technical Data Product number VS 90 Year of manufacture 2007 Chamber size: 1120x1020x380 mm Sealing bar length: 2 x 920 mm Capacity for packaging: 1-3 / min Weight: 1,450 kg Power supply: 400V 5N Vacuum packaging line The Cryovac VS 90 automatic conveyor vacuum packaging machine is designed for packaging fresh meat, meat products, and cheese for further industrial processing. The machine has a simple and robust design. Designed with ergonomic safety and hygiene requirements in mind, the machine is easy to operate, clean, and maintain. Specification: Manufacturer: Cryovac Model: VS 90 Type: Vacuum packaging machine Dimensions: 1940 x 1180 x 2700 (mm) Power supply: 400V 50Hz 3N Power: 17.3 kW Belt width: 700 mm Material: Stainless steel, acid-resistant Machines after a major overhaul. The pumps achieve a vacuum of 0.3 mBar, as confirmed by a recorded video. The line includes: Cryovac VS 90 chamber packaging machine Cryovac ST 77 steam immersion shrink tunnel Dwodpfxez Alw Rj Al Asc Busch WV 1000 internal booster pump Busch Ra 0160-1 external oil pump Busch Ra 0160-2 external oil pump Container for film scraps