Used Bruderer Bdwp.ec09-800 Rke 1 for sale (82,332)

Year of construction: 1993, condition: used, machine/vehicle number: P 285, pression: 800 kN Dkjdpe N D Ansfx Aahjp table size: 600 x 900 mm space needed: 1150 x 1900 x 2700 mm weight: 6000 kg

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M1 EW20° 2GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort Dkjdpfx Aaouayymjhjp - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: excellent (used), ALP Personnel Lift Here we offer you an ALP personnel lift. ALP Personnel Lift PHCI 800 EU 1 Working height max. 8m, payload 140kg, for indoor and outdoor use. The ALP lift, model PHC800, is a particularly compact personnel lift that impresses with its extremely small footprint and lightweight construction. The transport dimensions are also compact, with a height of 1.98m and a width of only 0.77m, allowing the model to easily pass through a standard door. Despite this space-saving design, the PHC 800 offers high performance. The working height of the ALP lift PHC800 is 8m with a maximum payload of 140kg. The robust aluminum construction and the hot-dip galvanized chassis ensure enormous stability and maximum durability. The PHC series, like all ALP personnel lifts, is available with either hand or foot control and can be used flexibly both indoors and outdoors. Developed and manufactured in accordance with applicable safety regulations, all PHC lifts also bear the CE mark. Areas of application: The ALP personnel lift PHC 800 can be supplied with various accessories and is therefore specifically suitable for different areas of application. Working height: 8.00 m Platform height: 6.00 m Payload: max. 140 kg Height: 1.98 m Footprint (indoor use): approx. 1.41 m x 1.39 m Footprint (outdoor use): approx. 2.43 m x 2.28 m Weight: approx. 280 kg Maintenance platform for 1 person: ALP PHCI 800 Approved for indoor and outdoor use Version EU1 Drive / Motor: Single-phase AC electric motor 230V/50Hz 1.5KW Control: 12V/13V DC Power cable: 3x1.5 Protection class: IP 55 Type: PHCI 800 EU 1 Condition: used Dksdpfxjzh U Rko Aahsp Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Used steel mesh container – fixed construction with drop-down flap – Euronorm 1200 x 800 mm This used steel mesh container is a robust and durable solution for storing, transporting, and organizing a wide variety of goods. Thanks to the standard Euronorm dimensions of 1200 x 800 mm, the container is easy to combine with Euro Dkodpfx Aaezhwtnohep

Year of construction: 1996, condition: used, For sale: 1 transformer, 1000/800 kVA. Manufacturer: Heim. Dodpfx Aaoh Eu Rzohokp

Condition: good (used), Manufacturer: Takraf / Zemag Dkedpspxn D Iefx Aahsp Type: ZWB 630 x 800 -1 Roll Dia.: 630mm Roll Width: 800mm Included frame and electrical motors.

Year of construction: 2004, condition: excellent (used), 1 used low pressure steam boiler ----- manufacturer : LOOS, Gunzenhausen type : U-ND capacity : 800 kg/h working pressure : 1 bar test pressure : 2 bar water contents full : 1.108 l year of construction : 2004 CE mark : 0036 Dodjnp Hwkepfx Aahjkp equipped with Weishaupt gas burner G5/1-D, ZMD-LN, 200-900 kW, 120°C, fittings for gas supply, switch cabinet with touch panel, and the existing small and large-scale fittings. Dimensions of boiler body (approx.): diameter incl. insulation : 1.230 mm width : 1.450 mm transport height : 2.200 mm length : 1.950mm length including burner : 2.700 mm 1 used feedwater module ----- manufacturer : LOOS, Gunzenhausen type : WSM content approx. : 800 l with switch cabinet, sampling water cooler, 2 dosing vessels

Condition: used, clear span: 709 mm, The scope of delivery includes: 01x depth bar, used Manufacturer: Nedcon Dksdergp U Ijpfx Aahep Material color: sendzimir galvanized Crossbar support: approx. 40 mm f. Stand depth: approx. 800 mm Total length: approx. 802 mm Clear span: approx. 709 mm Profile dimensions: C:60 x 50 x 12 mm Material thickness: approx. 2.00 mm Weight/pc: approx. 1.983 kg General information about the item: This item is only offered for collection. Any other desired transportation or shipment of this item is associated with additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, Stretch blow molding machine by Etek ISBM line = Injection stretch blow molding Stretch blow molding machine for single-use PET bottles made from PET preforms Stretch blow molding machine for production using the rotary process Manufacturer: ETEK / GF-Industries, Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Dsdpfokucxlex Aahskp Power: 90 kW Mains connection: 400 volts, 50 Hz Weight: approximately 6000 kg In like-new condition

Condition: good (used), 800 / 2700. Serviced and inspected. Folding machine included. Dksdstphi Hepfx Aahep

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, pressure: 1 bar, 1 used low-pressure steam boiler ----- Manufacturer: VIESSMANN Model: Vitoplex 100-LS Output: 580 kW Steam output approx.: 800 kg/h Water content approx.: 1,316 l Permissible operating overpressure: 1 bar Dksdpsw I T E Iefx Aahjp Year of manufacture: 2001 CE marking: 0035 Equipped with Weishaupt gas burner, separate control cabinet, feed water pump, and the existing coarse and fine fittings.

Condition: new, Year of construction: 2026, functionality: fully functional, It is a perfect complement to obtain the desired width product from the edged plates. While providing ease of use with its simple, compact and versatile designs, it can be integrated into the existing facility of any business thanks to its easy assembly. - Models with 120-160 mm cutting heights - Possibility to apply 2 or 3 saws to the movable and fixed sleeve - Manual or automatic feeding - Automatic fueling - Possibility to process 1000 mm wide products Optional equipment; - PLC controlled manual or automatic feeding Dkodpfx Aaerzakmohsp - Up to 3 axis movable saw option - Removal of waste from the system thanks to separator arms - Cutting easily and in the most efficient way with the alignment arms. Technical Specifications Max. Cutting Height : 120 mm / 160 mm Min. Cutting Height : 15 mm Max. Cut Width : 800 mm Max. Working Width : 1000 mm Min. Cut Length : 800 mm Max. Feed Rate : 40 m/min Saw Rotation Cycle : 3000 rpm Upper Rollers : 2 x 240 Bottom Rollers : 5 x Ø135 mm (120)

Condition: defective spare-parts repository (used), Year of construction: 2004, functionality: not functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, For sale are spare parts from a 3-axis CNC machining center of the brand Ingersoll, model OPS 800. Ideally suited for the production of graphite electrodes thanks to its high-speed spindle. The machine has been disassembled, and individual components such as the controller, extraction system, spindle, and control panel are available for sale. Please let us know which parts you require, and we will provide you with a tailored offer. Technical Data: Year of manufacture: 2004 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Dksdpjuu Rthsfx Aahop Control system: ANDRON Spindle speed: 42,000 rpm Tool changer: 36 positions Tool holder: HSK 63 Included: - Graphite dust extraction system - Chip trays - Cooling system Tooling not included. Transport and loading can be organized throughout Europe upon request and at an additional cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-ins or exchanges possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Condition: used, Year of construction: 2000, Second-hand single-head drilling machine with table, BOHLE Type GBM 1/800/10, year 2000 Dsdpsyll Upefx Aahekp

Condition: good (used), Year of construction: 1990, operating hours: 12,332 h, functionality: fully functional, machine/vehicle number: 1684, total length: 5,000 mm, total width: 2,350 mm, total height: 3,500 mm, input voltage: 400 V, type of input current: three-phase, pressure: 7 bar, heating capacity: 63 kW (85.66 HP), operating pressure: 7 bar, BvL cleaning plant / washing system Dkjdpfx Aow Dpk Hoahsp Hot wash system Chamber/trolley dimensions: 2200x800x900 mm Was in operation until 04/25, then cleaned and decommissioned. Will be dismantled in July 2025. Trolley for hanging parts is available. Various spare parts are available and included with purchase. See drawing and pictures. For further information, please feel free to contact me.

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Dedpfx Aajw E H E Rehekp Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: used, Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: driving work platforms from GSL (German Standard Lift) -Drive shaft: Ø 22 mm toothed Dkjdpfx Ajb A S N Ieahop -universally applicable -Number: 1x motors available -Price: per piece -Dimensions: 130/185 mm -Weight: 7 kg/piece

Condition: excellent (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve Dkodpfoy Alfqex Aahop -Manufacturer: Parker, directional control valve, unused, original packaging -Type:.: 4070180000 -Pmax: 350 bar -Number: 2x valve available -Price: per piece -Cardboard dimensions: 330/85/H120 mm -Weight: 5.7 kg/pc.

Year of construction: 2003, condition: excellent (used), 1 radial fan Manufacturer: Turbowerke Meissen Howden Model: LRN 0800 W 100/11 GR360 Volumetric flow rate: 56000 m³/h Pressure increase: 2000 Pascal at 20°C Speed: 1000 rpm Shaft power: 37 kW Weight: 1850 kg Year of manufacture: 2003 Dimensions: Width: 2400 mm Length: 1530 mm Height: 2040 mm Suction side diameter: 800 mm Shaft height without spring buffer foot: 1250 mm Pressure side dimensions: 700 x 700 mm Dedpfxjkn H Izj Aahjkp including 360° rotatable suction nozzle and transition including compensator for the pressure side. No damage or wear. Frequency inverter also possible as an option.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: S2749544010016, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK ONE, rotational speed (max.): 16,000 rpm, number of slots in tool magazine: 167, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Rotary pallet storage system PSS-R1800 with 10 storage locations - 167 tools in system _____ Basic machine G440 Travels: X=800, Y=800, Z=800 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector: 1,000 m³, filter class ISO ePM1 80% Machine cooling system with air-cooled cooling unit dynamic package Electrical cabinet lighting Dksdpfx Aswz Eddjahop Machine control system SINUMERIK ONE with machine control GROB⁴Pilot gen. 2 Swivel axis calibration GSC for 4-axis machining centers Program for creation of an automatic clamping sequence Time-controlled start of warm-up program - programmable at the HMI EES function to realize CN program on an external data carrier (SIEMENS) Technology package SINUMERIK MDynamics - milling (SIEMENS) Control panel to enter tool data at tool loading and unloading position Pallet guide element at rotary table Extension of B-axis' radius of action Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication GROB spindle diagnostics GSD Triple disk-type tool magazine HSK-A 63 with 167 (47+10|50|60) tool pockets Tool cleaning device Tool coding, system BIS-M Electromechanical tool breakage detection device Laser measurement system LaserControl NT LC50-DIGILOG for milling tools Setup station door for manual loading and unloading and automatic load and unload systems Rotary pallet storage system PSS-R1800 with 10 storage locations Air gun at setup station Cutting fluid return from pallet storage system PSS to machining center Lighting in the setup station of the PSS pallet storage system Clamping program editor for setup station of PSS-R450-1800 Support EES-call PSS-R450-1800 Support GSC swivel axis calibration PSS-R450-1800 NC program management system by the primary control PSS-R450-1800 Tool requirement planning PSS-R450-1800 5x Pallet 500 x 630 mm, T-slots Pallet equipped with 6 fluid connections High-pressure cutting fluid system (5-40 bar, IKZ) Cooling fluid system Premium - system description Premium flushing package Part clamping system in work area, customer-specific Part clamping system in setup station of pallet storage system PSS, customer-specific Part clamping system in setup station of pallet changer, customer-specific Rotating inspection glass for work area door Infrared probe OMP60 (RENISHAW) Remote machine diagnostics with access control switch 12-month warranty

Condition: used, Year of construction: 2021, Stamping Press Manufacturer: Bruderer AG, CH-9320 Frasnacht, Switzerland Type: BSTA 1600-181 Dkedpfx Aaozil Trjhep Serial number / Commission: 14073 Year of manufacture: 2021 Press force: 1,600 kN (160 tons) Press control type: B2 Connected load: 99 kVA Supply voltage: 400 V / 50 Hz Pneumatic connection: 7–10 bar Clutch and brake system pressure: 4.3–5.8 bar Max. stopping time: 250 ms Total weight: 33,020 kg Control panel: Bruderer touchscreen HMI Secondary display: Nidec / SYS PCS 100-P-C Sound-insulating enclosure (red/orange) Tool stroke counter: 11,983,110 (as displayed) UVV safety inspection by Bruderer: September 2025 – no defects found Strip Feeding Line Manufacturer: Kohler Maschinenbau GmbH, Lahr, Germany Type: BZA ABH 2000.2H – KRS 18.260/19 – BF1 Machine number: 41000 Year of manufacture: 2021 Connected load: 10 kW Supply voltage: 400 V, 50 Hz Feed type: BBV 300 Motorized decoiler with yellow safety enclosure

Condition: used, Year of construction: 1977, Stamping Press Manufacturer: Bruderer AG, Arbon, Switzerland Type: BSTA 110 Serial number: 4343 Year of manufacture: 1977 Press force: 110 tonnes Stroke rate: 100–850 strokes/min Stroke (adjustable): 16, 19, 26, 35, 43, 51, 58, 64, 70, 75 mm Ram adjustment: 89 mm Max. tool installation width: 1,170 mm Max. strip feed width: 400 mm Strip feed height above clamping plate: 80–180 mm Bed opening: 1,120 x 400 mm Connected load: 50 kW Supply voltage: 3 x 380 V AC, 50 Hz Control voltage: 24 V AC Compressed air connection: R ½", 6–10 bar Machine dimensions (H x W x D): 3,930 x 3,320 x 2,250 mm Total weight incl. strip feed: approx. 24,600 kg Strip Feed Unit Manufacturer: Bruderer AG, Arbon, Switzerland Type: BBV 320/200 Max. feed: 200 mm Dsdpezil Suefx Aahjkp Max. strokes/min: up to 1,000 (feed-dependent) Accessories Kohler unwinder Heспо straightener SYS PHS 5000 Sound-insulating enclosure (orange)

Condition: used, Year of construction: 2008, operating hours: 13,000 h, functionality: fully functional, The Bruderer BSTA 500-110B is a 500 kN Swiss-built high-speed stamping press, fitted with a BSV 75T double servo feeder for precision two-track strip feeding. Capable of up to 750 strokes per minute with B2 touch-screen control. Nominal force: 500 kN (50 tons) Year of manufacture: 2008 Stroke rate: 100–750 spm (variable) Adjustable stroke: 19 / 25 / 34 / 43 / 51 / 57 / 64 mm Ram height adjustment: 64 mm Press table area: 1080 x 650 mm Control: B2, IPC-based touch-screen press control, programmable memory for fast retooling BSV 75T DOUBLE SERVO FEEDER Type: tandem dual-feed servo unit, independently controlled tracks Dkedpfozh Nnwsx Aahop Max. strip width: 70 mm per track Max. material thickness: 2 mm Feed length: variable, freely programmable Feed angle: variable Pilot release angle: variable No clamping/gripper bars — strip held by driven feed rollers during stamping Designed for parallel advancing of two strips or feeding pre-profiled/pre-stamped strip

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Solenoid valve -Connection: 1/2" inch -Pilot: 3.9-10 bar -Pmed: 16 bar -Quantity: 1 available Dksdpfxeb A Sl Dj Aahsp Price: per piece -Weight: 1 kg

Condition: used, Hydraulic filter, filter element, high pressure filter -Manufacturer: Parker, high-pressure filter with clogging indicator / filter unit with 2 filters -Type: O-28P-1-10Q-M2-98-C2C2-1-1 / 0-24P-1-40W-M-1-2 Dedpfx Aomv T Hqjahjkp -Number: 6x filter unit available -Price per unit -Dimension: 380/150/H250 mm -Weight: 20 kg/pc.