Used Bosch Nibbling Machine 4.5 Mm for sale (97,849)

Condition: used, Nibbling machine, nibbler, nibbler, tin snips, circular shears Hedpfx Aed Ryhqoahsp -Power: 1800 watts -Voltage: 220 V -Max. Cutting capacity: 4.5 mm -Dimensions: 570/220/H250 mm -Weight: 10.5 kg

Condition: used, Nibbling machine, nibbler, nibbler, tin snips, circular shears -Power: 330 watts -Voltage: 220 V -Max. Cutting capacity: 2 mm Hodsd R N Igjpfx Aahjp -Dimensions: 280/60/H150 mm -Weight: 2.3 kg

Condition: good (used), Nibbling machine, nibbler, nibbler, tin snips, circular scissors Hjdpeb A N Ncsfx Aahop -Power: 900 watts -Max. cutting capacity: 3.25 mm -Dimensions: 500/220/H230 mm -Weight: 5.5 kg

Condition: good (used), Bosch starter motor -Manufacturer: Bosch starter motor 12 V, unfortunately without type designation -Voltage: 12 V -Teeth: 10 Hodsit Rmfepfx Aahep -Solenoid coil: Type Dimensions: see photos -Overall dimensions: 340/180/H115 mm -Weight: 13.8 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders, lifting power jacks -Manufacturer: Bosch, double-acting hydraulic cylinder, stroke 75 mm -Type: Piston rod: Ø 20 mm / M14 Hjdpfxjv Ta Dkj Aahop -Holes: Ø 20 mm -Dimensions: Ø 65 x 300 mm -Weight: 3.0 kg

Condition: good (used), diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manifold: from generator MWM RHS 518V16 -Dimensions: see photos -Total dimensions: 800/210/H70 mm Hodpfeivqmlsx Aahjp -Weight: 8.7 kg

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance Hedpfjwka S Iox Aahsp - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2026, functionality: fully functional, D-T50 – CNC Turret Punch Press | Heavy Duty CNC Turret Punch Press – D-T50 | 500 kN | Sheet size 2500×1250 mm Heavy-duty CNC turret punching machine engineered for high-volume sheet metal fabrication. With a punching force of 500 kN and a stroke rate of 160 hits per minute, the D-T50 guarantees excellent productivity and precision. Key Specifications: • Capacity: 500 kN • Hit Rate: 160 strokes/min • Sheet Size: 2500 × 1250 mm • Max. Sheet Size (with single reposition): 5000 × 1250 mm • Max. Sheet Thickness: ≤ 6.35 mm • Accuracy: ± 0.1 mm • Feeding Speed: 80 m/min • Turret Stations: 16 / 24 / 32 • Air Pressure: 0.65 MPa • Machine Dimensions: 5000 × 5200 × 2300 mm ✅ High hit rate – ideal for mass production ✅ Extended sheet capacity with repositioning up to 5000 mm ✅ CE certified | Warranty included | Spare parts & service available D-Y80 – CNC Turret Punch Press | Heavy Duty | Thick Plate Hjdoy Swn Nepfx Aahjp CNC Turret Punch Press – D-Y80 | 800 kN | Thick Plate up to 15 mm Heavy-duty CNC turret punching machine designed for processing thick sheet metal. The D-Y80 accommodates material up to 15 mm thick, delivering 800 kN punching force — perfect for structural and heavy-gauge tasks. Key Specifications: • Capacity: 800 kN • Hit Rate: 100 strokes/min • Sheet Size: 2000 × 800 mm • Max. Sheet Thickness: 6–15 mm • Accuracy: ± 0.15 mm • Feeding Speed: 60 m/min • Turret Stations: 6–12 • Air Pressure: 0.65 MPa • Machine Dimensions: 4100 × 4000 × 2400 mm ✅ Exceptional punching force – specialist for heavy-gauge sheet metal ✅ Robust design for demanding industrial applications ✅ CE certified | Warranty included | Spare parts & service available

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Hjdpfxexmt Eqj Aahsp

Year of construction: 2010, condition: used, functionality: fully functional, Elumatec SBZ 130 CNC-controlled milling machine, 7,000 mm version Hsdpfx Aaeyr Rubohjp 8 clamps Tool changer with 8 positions on the milling head

Condition: used, Year of construction: 2001, punching force: 2,800 t, total length: 2,500 mm, sheet thickness (max.): 8 mm, overall weight: 11,500 kg, table length: 1,250 mm, Offered for sale. Nice Boschert punching nibbling machine. Comes with a large selection of tools. Hodjyiz I Tepfx Aahjp

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, position of the milling head: 2.5 x 2.5 °, mount diameter: 50 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, total width: 50,000 mm, total height: 48,750 mm, total length: 212,400 mm, table length: 12,000 mm, table width: 1,650 mm, power: 0.03 kW (0.04 HP), overall weight: 50,000 kg, X-axis: 10300mm Y-axis: 2000mm Z-Axis: 1800mm Hsdjrx Rtrepfx Aahjp Table Length: 12000mm Table Width: 1650mm Table load: 50000 Power on spindle: 22/30kW Spindle speeds: 60-3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21240mm Width: 5000mm Height: 4875mm Weight: 50000kg

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, functionality: fully functional, height adjustment type: electric, working range: 400 mm, warranty duration: 6 months, Roller coating machine Manufacturer: Cosma Type: 400 RC Year of manufacture: 2023 (demonstration machine – never used in production!) Includes 6 months warranty on used machinery 2-roller coating machine for applying oil The Cosma roller coating system is used to apply oils to solid wood flooring (parquet), paneling, stairs, garden materials, scaffolding wood, and wall decorations, among other things. Working width: 400 mm Suitable for workpieces with a thickness of: 10 - 50 mm Hodpfszgvlmjx Aahjp Working height: 900 mm Equipped with: - Metering roller, 0.37 kW - Rubber-coated coating roller, 0.37 kW, 25 Shore With electric height adjustment and mechanical height indicator Control panel for: Feed speed, amperage per roller, and height adjustment of the rollers

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 2,200 kg, input voltage: 400 V, input current: 7 A, input frequency: 50 Hz, broaching length: 200 mm, number of broaching positions: 4, broaching speed: 25 m/min, workpiece diameter (max.): 460 mm, total length: 1,717 mm, total width: 1,221 mm, total height: 1,885 mm, METAL SLOTTING MACHINE B5020 – 200 MM STROKE Metal Technics Polska B5020 Condition: New (2026) Functionality: Fully Functional Location: Sokołów Podlaski, Poland Machine Description The B5020 Metal Slotting Machine is designed for machining keyways, splines, internal grooves and other precision slotting operations. Its rigid construction and large rotary table make it ideal for tool rooms, maintenance workshops and manufacturing facilities. Main Advantages 200 mm stroke Heavy-duty industrial construction Ø460 mm rotary table Automatic longitudinal, cross and rotary feed Adjustable ram inclination Maximum slotting force: 5 kN CE Certified Technical Specifications Specification Value Maximum Ram Stroke 200 mm Stroke Speeds 32 / 50 / 80 / 125 strokes/min Ram Inclination 0° – 8° Vertical Ram Adjustment 200 mm Table Diameter 460 mm Maximum Table Load 400 kg Longitudinal Table Travel 420 mm Cross Table Travel 420 mm Table Rotation 360° Maximum Tool Size 25 × 40 mm Maximum Slotting Force 5 kN Main Motor Power 3 kW Feed Motor Power 0.7 kW Machine Dimensions 1717 × 1221 × 1885 mm Hedpfx Aszf Huijahjp Machine Weight 2200 kg Delivery Conditions Brand New Machine CE Declaration of Conformity Technical Documentation Warranty and After-Sales Service Spare Parts Availability

Condition: used, Plate assembly, clamping plate with T-slots 8000 x 2100 mm, 2-piece Clamping surface: Length: 8000 x Width 2100 mm Plate thickness: 360 mm - Consisting of 2 clamping plates with 7 T-slots each (Length 4000 x Width 2100 x Plate thickness 360 mm) Transport dimensions: 2 plates stacked on top of each other Plate assembly: Length 4000 mm x Width 2100 mm x Height approx. 900 mm Transport weight of plate assembly: approx. 14 tons Good condition Hsdpfx Aajzc Nt Dehjp

Condition: good (used), Year of construction: 2002, Make: PLEIGER Type: HF 75 / 115 S 30 Control: Siemens Simatic panel Year: 2002 Stroke speed slide step 1 : 4 - 20 M/Min Stroke speed slide step 2 :0,3 - 3 M/Min Hjdpekvnc Sjfx Aahjp Rotation chuck step 1 : 300 Rpm and 320 Nm Rotation chuck step 2: 100 Rpm and 1290 Nm Horizontal deep hole honing machine Horizontal tube honing machine Horizontal cylinder honing machine Horizontal pipe honing machine Fine finishing of cylindrical bores Specifications Metric US Standard Drilling depth 11500 mm Power on spindle 55 kW Speeds / ranges 300 Rpm Dimensions (Estimate) Length 25000 mm Width 2000 mm Height 2000 mm Weight 30000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), FARO Prime 3D coordinate measuring arm Manufacturer: FARO Technologies Type: Prime Device type: Portable 3D coordinate measuring arm / Portable CMM Date of manufacture: 09/10/2013 Calibration date according to certification: 06/25/2015 Made in Switzerland Mobile 3D measuring arm for industrial metrology, quality assurance, component inspection, reverse engineering, tool and mold making, jig and fixture construction, and production control. Technical data Measuring range: approx. 1.8 m / 6 ft Axes: 6 Single Point Accuracy: 0.019 mm Volumetric accuracy: ±0.027 mm Repeatability: up to 0.016 mm Revision: 28.1 Bluetooth wireless technology USB interface Integrated battery operation Temperature compensation Portable CMM measuring arm technology Compatible with multiple probe systems Weight measuring arm: approx. 9.3 kg Hsdpfx Aaozc Erpjhep Total weight incl. case and accessories: approx. 35 - 50 kg Equipment / Scope of delivery FARO Prime measuring arm Transport case HP EliteBook laptop Reference sphere / Calibration sphere Base plate / Mounting plate Measuring probes / Probe set Software data carrier USB dongle Operating instructions / Manuals Other accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Shipping or freight shipping possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: new, functionality: limited functionality, Year of construction: 2025, control type: manual, Equipment: CE marking, documentation/manual, OMEC 4-Roller Mechanical Symmetric Plate Rolling Machine with Double Pinch 1530×2.5 mm Brand new, CE certified. Made in Italy. Double pinch. Top and bottom rollers powered with equal torque. Side rollers motorized for upward/downward movement. Front-opening top roller. Special bearings for side rollers. External lever to control roller inclination. Sheet clamping with bearing-actuated device. Two-pedal foot control. Electrical panel compliant with CE standards. Millimeter indicator for sheet clamping position. Standard equipment included with the plate rolling machine: - Frontal conical device on top roller. - No. 2 digital displays for the side roller positions. - No. 1 digital display for the motorized sheet clamping. - Grinding/Turning of rollers after hardening treatment. - Roller hardening. - Side sheet loading table with sheet centering stops, marked in mm. Working length: 1530 mm. Top and bottom roller diameter: 90 mm. Side roller diameter: 95 mm. Plate thickness: 1.5 – 2 – 2.5 mm. (1.5 x D / 3 x D / 5 x D). Hedpfx Aoy E Scheahjp Roller hardness: 55/60 HRC, 2 mm case depth. Installed power: 1.8 kW. Dimensions: 2290 x 750 x h 1150 mm. Weight: 690 kg.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Automatic bending machine Co.ma.l Four Matic - 4 rolls (2 with diameter 30 mm / 2 with diameter 37 mm) - Effective bending length: 500 mm - Minimum bendable diameter: 40 mm - Automatic cycle management - Pedal operation Hodpfx Aaoxdr Skehep - Digital position display Machine has been used very little and is in good preservation condition. Original documentation and user & maintenance manual are available.

Condition: defective spare-parts repository (used), Year of construction: 1995, Euromac hydraulic stamping machine Inventory no. 3723 * Manufacturer: Euromac Hsdpfszd Hv Rox Aahop * Type: XP 950/30 CNC * Capacity: 30 tons * Table size: mm * Stroke rate: 180 strokes/min * Table size approx. 4000 x 1300 mm * Cabinet with accessories * Electrical fault

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Excellent condition Hedpezc Rucefx Aahep No heavy use

Condition: used, Year of construction: 2011, EUROMAC MTX FLEX6 Hedeynkqzepfx Aahjp

Condition: good (used), Year of construction: 2017, operating hours: 48,888 h, functionality: fully functional, X Working area max.: 2000 mm (without repositioning) Y Working area max.: 1250 mm Hsdpoza E Huefx Aahep Operating hours: 48,888 hours Control system: Bosch PNC-P Machine - C-frame - Coordinate guidance - Linear magazine with 15 positions for clamping claws and tools - Hydraulic clamping claws (2 pieces) - Drives with maintenance-free three-phase motors - Repositioning device with programmable pressure plate - 1st stop pin (right inside) - Dividing slide Punching head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure plate position - Tool length compensation - Spray lubrication for the punch - Punch slug extraction - Forming function Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Operating panel with 15" TFT color screen - Integrated technology data - Teleservice interface via the internet - Automatic shutdown - Program management - Production plan Data transfer - USB interface - RJ45 network connection Safety - CE marking - Multi-beam light curtains - Rapid shutdown of drives Extended standard equipment - Ball tables - Chip container - Initial oil filling - Additional clamping claw - Foot switch for start - Bulge detection - Vibration-damped installation - 5 RTC cassettes with die holders

Condition: good (used), Year of construction: 2008, functionality: fully functional, X working area max.: 3000 mm Y working area max.: 1500 mm Control system: Sinumerik 840D Standard equipment: - Sturdy C-frame - Coordinate guidance with integrated linear magazine, 25 positions for tools and clamping jaws - 4 clamping jaws - Automatic part slide 500 x 500 mm - Drives: Maintenance-free three-phase servo motors Punch head: - Hydraulic mono-tool holder - 360-degree rotation for all tools - Automatic tool length compensation - Tool spray lubrication - 2nd lubricant tank - Programmable wiper movement - Punch slug extraction - Programmable clamping device for re-clamping with pre-selectable clamping force - Bulge detection Control system: - 10.4-inch TFT display - Simple operation - Diagnostic function - Integrated 3.5-inch floppy disk drive - RJ45 network connection Safety: - CE marking - Multi-beam light barriers - Rapid shut-off of hydraulics + Multitool function + MultiBend function + Thread forming function + Marking/fast beading function Hsdpeza Elqefx Aahsp + Deburring and rolling technology + Individually opening clamping jaw + Re-clamping cylinder + Sensor for part slide + Vibration-damped installation + Automatic shut-off + Chip conveyor + MDE interface + ToolMaster 70

Condition: used, Year of construction: 2001, operating hours: 563 h, functionality: fully functional, machine/vehicle number: 258, punching force: 20 t, total height: 2,200 mm, total width: 3,200 mm, total length: 4,890 mm, sheet thickness (max.): 6 mm, type of input current: three-phase, workpiece weight (max.): 100 kg, overall weight: 11,500 kg, input current: 48 A, input frequency: 50 Hz, compressed air connection: 6 bar, feed rate X-axis: 82 m/min, feed rate Y-axis: 82 m/min, feed length X-axis: 2,000 mm, feed length Y-axis: 1,270 mm, input voltage: 400 V, positioning accuracy: 0.07 mm, pressing force: 20 t, Equipment: safety light barrier, Description TECHNICAL DETAILS Oil capacity: 160 l Turret speed: 25 rpm Travel ranges Machine travel range without repositioning: 1,250 mm x 2,000 mm Machine travel range with 1 repositioning: 1,250 mm x 4,000 mm Machine travel range with 1 repositioning and 1 flipping: No flipping capability Processing The machine is equipped with brush strips and ball-bearing elements in the table, so both processing methods can be used directly. Max. sheet metal thickness over the ball-bearing elements: 6 mm Max. sheet metal thickness over the brush strips: 3 mm Max. weight per table: 100 kg Accuracy Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Control and axes Pneumatic clamping devices: 2 Number of simultaneously controlled axes: 3 (X, Y, C) Performance Strokes per minute, feed rate 25.4 mm: X320 / Y250 Working cycle nibbling, feed rate 1 mm: X920 / Y920 Tools Minimum programmable step: 0.01 mm Number of tools: 31 Hsdpfxszc Dvmo Aahop Max. tool diameter: 88.9 mm Amadex stations: 2 x 11 1/4" + 1 x 2" Note: No tools included.