Used Binder Inkubator Bd 115 for sale (2,766)

Condition: used, Binder Type: BD 115 Key Features Model BD 115 | Standard incubator with natural convection Technical Data BD 115 External Dimensions: Width (net) 835 mm Height (gross, including feet/castors) 705 mm Depth (net) 645 mm Depth (gross, including door handle and exhaust pipe) 750 mm Wall Clearance (rear, minimum) 100 mm Wall Clearance (side, minimum) 160 mm Exhaust Pipe, Outer Diameter 52 mm Doors Number of Doors 1 Internal Dimensions: Width 600 mm Height 480 mm Depth 400 mm Internal Volume 115 liters Steam Chamber Volume 142 liters Drawers Number of Drawers 0 Maximum Number of Drawers 5 Maximum Load per Drawer 20 kg Permissible Total Load 50 kg Weight (empty) 61 kg Temperature Data Temperature Range, 5°C above ambient temperature to 100°C Temporal Temperature Deviation at 37°C ± 0.1 K at 50°C ± 0.1 K Spatial Temperature Deviation at 37°C ± 0.4 K at 50°C ± 0.8 K Heating Time to 37°C 70 minutes to 50°C 90 minutes Recovery Time after 30 sec door open at 37°C 10 minutes at 50°C 12 minutes Electrical Data: BD115-230V Hfsdpfx Aijzgaicetsn IP 20 Rated Voltage (+/-10%) at 50 Hz mains frequency 230 V Rated Voltage (+/-10%) at 60 Hz mains frequency 230 V Type of Current 1N~ Rated Power 0.20 kW Condition: used Scope of Delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Binder Type: VDL 115 Binder Safety Vacuum Drying Oven For sale is a BINDER VDL 115 safety vacuum drying oven for professional use in laboratories, industry, and research. Device description: The BINDER VDL 115 is an explosion-proof vacuum drying oven for gentle drying, degassing, and conditioning of materials under vacuum. The device is specifically designed for applications involving flammable solvents and meets high safety requirements (ATEX version). Due to the precise control of temperature and pressure, the device is ideally suited for reproducible laboratory and industrial processes. Typical applications: Chemical and pharmaceutical laboratories Research & development Quality control Industrial drying processes under vacuum Temperature / Vacuum: Temperature range: +9 °C above ambient to approximately +110 °C Final vacuum: up to approximately 0.01 mbar Electronic temperature and pressure control Equipment: Safety glass pane with splinter protection ATEX-compliant design Several insertion levels (number depending on the configuration) Connections for vacuum and inert gas Dimensions: Internal volume: approximately 115–119 liters Internal dimensions (W × D × H): approximately 506 × 460 × 506 mm External dimensions (W × D × H): approximately 743 × 581 × 942 mm Electrical data: Rated power: 1.90 kW Mains connection: 230 V / 1N~ Current consumption: 8.3 A Frequency: 50–60 Hz Protection class: IP54 Rated temperature: 200 °C Temperature protection: DIN 12880, Class 2.0 Weight (empty): approximately 158 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) Hfsdpfsziyymex Aiten We will gladly answer any further questions you may have by telephone.

Condition: used, Binder Safety Vacuum Drying Oven Binder VDL 115 Safety Vacuum Drying Oven ATEX version for potentially explosive areas For sale is a used safety vacuum drying oven from the manufacturer BINDER GmbH. The vacuum drying oven is suitable for gentle drying, degassing, and conditioning of temperature-sensitive materials under vacuum, as well as for applications with flammable solvents. Technical data Manufacturer: BINDER GmbH Type: VDL 115 Device type: Safety vacuum drying oven Internal volume: approx. 115 liters Internal dimensions: approx. 506 × 460 × 506 mm (W × D × H) External dimensions: approx. 743 × 581 × 942 mm (W × D × H) Weight: approx. 158 kg Temperature range: approx. +9 °C above ambient to +110 °C Ultimate vacuum: up to approx. 0.01 mbar Electronic temperature and pressure control Rated temperature: 200 °C Rated power: 1.90 kW Mains connection: 230 V / 1N~ Rated current: 8.3 A Frequency: 50–60 Hz Protection class: IP54 Temperature protection: DIN 12880 Class 2.0 Item number: 9030-0012 Equipment ATEX version Electronic temperature control Vacuum indicator Digital display Viewing window in the door Stainless steel interior Several insertion levels Connection for vacuum Connection for inert gas Original brief operating instructions on the device Application areas Chemical laboratories Pharmaceutical laboratories Research and development Quality control Material testing Gentle vacuum drying Degassing and conditioning Condition Used Optical condition as shown in the pictures Scope of supply 1x Binder VDL 115 Safety Vacuum Drying Oven Hfjdjznbm Eopfx Aitsn Accessories as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Binder   Type: MK 115 E3.1   Refrigerant: R404A (1.20 kg)   Binder Climate Chamber for Rapid Temperature Changes   Model MK 115, Article Number 9020-0175 The basis for reliable material testing MK series | for dynamic temperature profiles   The smart alternative to complex individual solutions for cyclic temperature tests: The MK series masters all heat and cold tests between –40°C and 180°C. It is characterized by precision and performance. The APT.line™ preheating chamber technology ensures natural simulation – and thus reliable test results.   Performance Features Electronically controlled APT.line™ preheating chamber technology MCS controller with program memory Adjustable ramp functions 1 port, Ø 50 mm (left, measured approx. 49.3 mm) Temperature selector, Class 2 (DIN 12880) Heated viewing window with interior lighting Ethernet interface 4 rollers (mobile, 2 lockable) Stainless steel interior with insert   Technical Data:   External dimensions: approx. 980 x 1725 x 865 mm (W x H x D)   Internal dimensions: approx. 600 x 480 x 400 mm (W x H x D)   Internal volume: 115 liters Weight: approx. 260 kg   Temperature data: Temperature range: -40°C to +180°C Very rapid temperature changes (climate chamber operation)   Electrical data: Rated voltage: 400 V / 50 Hz Rated power: 3.5 kW Rated current: 11.0 A   Max. operating pressure: 29 bar   Condition: used optically and technically as shown in the pictures Hedey H Hvlspfx Aitsfn   Scope of supply: Binder MK 115 climate chamber incl. insert / interior equipment   For your safety as a buyer: Inspection possible by arrangement Loading with a forklift can be arranged   (Subject to changes and errors in technical data!)   We will be happy to answer any further questions by telephone or message.

Condition: as good as new (ex-display), Year of construction: 2025, Binder VDL 115 (2025) laboratory vacuum chamber, in perfect condition, demonstration unit Model: Binder VDL 115 Year of manufacture: 2025 Condition: like new – demonstration unit, after factory tests Capacity: 115 liters Power supply: 230 V Availability: in stock VAT invoice: yes Location: Grabina 92-701 Poland Optional: transport --- BINDER VDL 115 – laboratory vacuum dryer for flammable solvents BINDER VDL 115 is an advanced laboratory vacuum dryer designed for the safe drying of materials containing flammable organic solvents. Thanks to its design compliant with the ATEX 2014/34/EU directive, the device ensures the highest level of safety and precision during laboratory and industrial processes. The VDL 115 model offers fast and gentle drying with optimal heat transfer through aluminum heating shelves. An intuitive controller with a touchscreen enables convenient monitoring of temperature and pressure, and an automatic drying program ensures controlled process execution and automatic venting of the chamber after completion. Key features: * Chamber capacity: 119 l * Temperature range: from +9°C above ambient temperature to +110°C Hodevq I Tnopfx Aitofn * ATEX explosion-proof certification EX II 2/3/- G IIB T3 Gb/Gc/- X * Intuitive controller with a color touchscreen * Graphical display of temperature and pressure * Built-in data logger with USB export * Software monitoring of the drying process with automatic chamber venting * 2 aluminum heating shelves (expandable to 6) * Connection for inert gas or air * DN16 port for mounting sensors and measuring cables * Large viewing window with safety glass * Ethernet interface for communication with a computer Technical data: * Capacity: 119 l * Maximum temperature: 110°C * Maximum shelf load: 20 kg * Maximum total load: 70 kg * Rated power: 1.6 kW * External dimensions (W × H × D): 743 × 942 × 581 mm * Weight: 158 kg Applications: * chemical and pharmaceutical laboratories, * electronics industry, * research and development (R&D) laboratories, * quality control, * drying of samples containing organic solvents, * processes requiring safe operation under vacuum conditions. BINDER VDL 115 is a professional, premium-class vacuum dryer, combining high performance, precise control, and compliance with ATEX safety requirements, making it ideal for the most demanding laboratory and industrial applications.

Condition: used, This listing is for the Binder BF115 UL Incubator / Oven The unit is in full working condition and is ready for immediate use BINDER BF 115 UL – Forced Convection Incubator The BINDER BF 115 incubator from the Avantgarde.Line series is designed for precise and gentle incubation applications in laboratories where performance, uniformity, and reliability are critical. Work particularly well under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery time. Hfedpfxsxhfz Hj Aitsn Key Performance Features Temperature Range: Ambient +8 °C to 100 °C – ideal for a wide variety of microbiological, bacteriological, and stability testing. Excellent Uniformity & Stability: ±0.3 K uniformity at 37 °C ±0.1 K fluctuation at 37 °C ±1.6 K uniformity at 100 °C Fast Heating & Recovery: Heats to 37 °C in ~8 minutes Recovers in ~3 minutes after a 30-second door opening Design & Control Highlights APT.line™ Technology: Ensures uniform temperature distribution across all shelves – even with full chamber loads. Forced Air Convection: Enables efficient heat transfer and consistent conditions throughout the chamber. Disinfection Routine: Built-in 100 °C sterilization cycle for internal decontamination. User Interface: Intuitive LCD controller with programmable timer, USB port for data logging, and electromechanical exhaust flap control. Safety Thermostat: Class 3.1 safety (DIN 12880 compliant) with visual alarm for over-temperature protection. Internal Viewing: Transparent inner glass door allows sample observation without disturbing internal environment. Technical Specifications Feature Details Chamber Volume 114 liters Temperature Range Ambient +8 °C to 100 °C Power Supply 120 V, 12.5 A fuse (NB At this time we also have in stock 230 V See BF115) Noise Level 43 dB(A) typical Weight ~54 kg Shelves 2 chrome-plated shelves (up to 5 possible) Applications & Benefits Use Cases: Ideal for microbiology, bacteriology, tissue culture, stability testing, and pharmaceutical incubation. Scalable Performance: Optimized for full load conditions and large batch throughput without compromising performance. User-Friendly: Stackable, ergonomic handle design, easy-to-clean stainless steel chamber with no fixed fixtures. Highly Reliable: Rapid recovery and precise temperature regulation for reproducible results, even with frequent door openings.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, Binder incubator BF 115 Avantgarde Line. Forced air circulation. Usable volume: 114 L. Maximum load: 20 kg per shelf. NEW and UNUSED. Includes functional warranty. Hfodpowutt Hsfx Aitsn

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 3928-001, cutting width (max.): 1,150 mm, The machine is in good condition. It is currently in storage in Turkey. Hsdsy Sipljpfx Aitofn

Condition: like new (used), BINDER FED 115 – laboratory dryer / heating chamber – like new condition For sale, a professional BINDER FED 115 laboratory dryer from the renowned German manufacturer, BINDER. The unit is in excellent condition, practically like new. It has not been used. The interior and exterior are very well preserved and show no signs of use. Technical specifications: * Manufacturer: BINDER * Model: FED 115 E2 * Chamber volume: approx. 115 liters * Maximum / nominal temperature: 300°C * Power supply: 230 V, 1N~ * Power: 1.60 kW * Rated current: 7.0 A * Frequency: 50/60 Hz * Temperature protection class: 2.0 * Made in Germany The FED model is designed for precise drying, heating, and thermal treatment of samples in laboratories, industry, and quality control. Condition: like new / unused. 8 units available. Hsdpfez Da Uqjx Aitjfn

Condition: good (used), FKS PrintBind KB 2000 Book Binder This machine is 100% functional and ready to use. Manufactured by FKS Hamburg, Germany. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. Hsdpfxsz Rk Hrj Aitsfn The machine has a convenient base and a built-in compressor. Technical specifications: Maximum format: 320 x 310 mm Spine thickness: 60 mm Capacity: approx. 320 books/h Weight: 186 kg 230V power supply Material detection sensors Automatic cover detection and automatic cover clamp Spine milling Simple operation via LCD panel Adjustable cover clamping force Infinitely variable glue thickness adjustment Includes user manual and compressor.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the upgraded safety and performance test package “P Plus.” This is not a standard laboratory incubator, but rather a high-end safety test chamber specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. The device is fully functional and has been tested. It originally sustained a transport-related housing damage, which has been professionally repaired and repainted. Technically flawless – visually in very good condition Hfsdpfoyyw E Rex Aitjn 100% operational – no limitations Price advantage: €1,000 cheaper than comparable units Special Value Added: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR hazard level 5 (fire/flames, no explosion). What exactly can the device do? (Item 2 – Performance & Application) - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles at temperature) - Long-term temperature runs and thermal cycling tests - Testing of unpowered and cyclical powered cells - Reproducible, precise temperature control throughout the entire chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test labs & safety testing - Automotive / E-mobility / Energy storage sectors The P Plus package turns the KB 720 into a genuine battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical and acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection inside chamber - Exhaust port with reversible overpressure valve - Connections for external inertization (e.g., nitrogen) - Emergency stop / manual trigger of suppression system - Cable feedthroughs for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur, but without explosion or uncontrolled propagation. This is not an abuse or destruction testing device, but a compliant, safe test chamber for real-world operational and fault scenarios. Technical Key Data: Temperature range: –10 °C to +100 °C Internal volume: approx. 698 liters Shelves: 4 × stainless steel Max. load per shelf: 45 kg Max. overall load: 100 kg Electrical Data: Power supply: 200–240 V AC Frequency: 50 / 60 Hz Phase: single-phase Power consumption: approx. 2.1 kW Fusing: 16 A Refrigerant: R134a Protection class: IP 20 Dimensions & Weight: External (W × H × D): approx. 1250 × 1950 × 900 mm Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – why this device is special: - Genuine battery safety test cabinet - EUCAR hazard level 5 capable - Integrated CO₂ extinguishing system - Large chamber (≈700 l) - High market and resale value Weight: approx. 285–300 kg Documents & Downloads Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors reserved!) Further questions? Please feel free to contact us by phone.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, temperature: 60 °C, Available immediately! Hfjdpfx Aijx Izwmeten Function Easy operation thanks to a fully automatic cleaning process, allowing professionals to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS special cleaner (washing solution). The contaminated items are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the solution in the tank is heated. Inside the closed unit, the basket rotates at a constant speed around its own axis. The pump units draw the washing solution from the tank and distribute it through 6 stainless steel jet pipes with overlapping flat spray nozzles. The items are intensively sprayed from all sides with the hot solution due to the uniform rotation of the motor-driven basket. Once the cleaning process is complete, the unit shuts off automatically. Advantages - 2 horizontally mounted pumps - 6 three-dimensional stainless steel jet pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket, V-belt drive via separate motor - Steam extraction - Stainless steel sieve plate with filter basket above the wash tank - Suction filter in front of the pump chamber - Water shortage safety feature - Individually height-adjustable feet Technical Data Capacity dipping tank / basket: 280 l Diameter dipping tank / basket: 1150 mm Load capacity: 350 kg / optional 500 kg Temperature min. - max.: 0-60 °C Working height: 700 mm Dimensions (W x D x H): 1570 x 1510 / 1830 x 1495 / 2175 mm Weight: 250 kg Heating power: 10 kW Spray amount: 2x10800 l/h Pump pressure: 2.3 bar Material: Stainless steel Electrical connection: 13.5 kW / 400 V / 50 Hz / 32 A

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Hodpezg Dx Uefx Aitjfn Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: good (used), Horizon BQ-270 Perfect Binder Machine in very good condition. Ready to use. Only 240,000 books used. Hjdpfez R In Hjx Aitofn Manufacturer’s description: Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of booklets or pages. The Horizon BQ-270 is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. This model, equipped with a cover thickness scanner, allows for „on-demand” book binding. Speed ​​(sheets/h): 500 – Ability to save repeat jobs – Sheet size: max: 320 x 310 mm; min: 135 x 115 mm – Cover size: max: 660 x 320 mm; min. 240 x 135mm – Book thickness: max. 50mm; min. 0.5mm – Cover weight range: 80–300g/m – Cover stack height: max. 70mm – Glue temperature: 100–200°C – Machine weight: 920.0kg – 3-phase power supply – Power consumption: 2.9kW – Capacity: 500 production cycles/h The kit includes documentation and glue.

Condition: used, Binder BINDER KB 720 Cooling Incubator with P Plus Package – Battery Test Chamber, EUCAR 5, CO₂ Extinguishing System Device description: For sale is a BINDER KB 720 (E6) cooling incubator, manufactured in 2022, equipped with the extended safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-quality safety test chamber, specifically designed for aging, performance, and safety tests of lithium-ion energy storage systems. Special added value: The device is designed to safely detect, monitor, and contain critical battery events – up to EUCAR hazard level 5 (fire/flames, no explosion). What can the device do specifically? (Point 2 – Performance & Application) Performing aging tests on lithium-ion cells Performance tests (charge/discharge cycles at varying temperatures) Temperature endurance tests and temperature change tests Tests of unpowered and cyclically powered cells Reproducible, precise temperature control throughout the usable space Safe execution of tests under realistic thermal conditions Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: Battery & cell manufacturers Hjdpfxezizr Rj Aitefn Research and development laboratories Testing laboratories & safety testing Automotive / e-mobility / energy storage The P Plus package turns the KB 720 into a genuine battery safety test chamber: Integrated safety functions: Automatic & manual CO₂ fire extinguishing system Smoke detector with optical & audible alarm Mechanical double-door locking system (secure containment) Spark protection in the interior Exhaust port with reversible overpressure valve Connections for external inertization (e.g., nitrogen) Emergency stop / manual triggering of the extinguishing system Feedthrough openings for charging and measuring cables Result: The device is designed for tests on lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur without resulting in an explosion or uncontrolled propagation. Not an abuse or destruction test device, but a safe, standard-compliant test chamber for real operating and failure scenarios. Technical key data: Temperature range: -10 °C to +100 °C Interior volume: approx. 698 liters Inserts: 4 x stainless steel Max. load per insert: 45 kg Max. total load: 100 kg Electrical data: Mains connection: 200–240 V AC Frequency: 50 / 60 Hz Phase: 1-phase Power consumption: approx. 2.1 kW Fuse rating: 16 A Refrigerant: R134a Protection class: IP 20 Dimensions & weight: External (W × H × D): approx. 1250 × 1950 × 900 mm Internal (W × H × D): approx. 970 × 1250 × 576 mm In short – why this device is special genuine battery safety test chamber suitable for EUCAR hazard level 5 integrated CO₂ extinguishing system large chamber (≈700 l) high market & resale value Weight: approx. 285–300 kg Documents & Downloads Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, BINDER   BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ extinguishing system   Device Description:   For sale is a BINDER KB 720 (E6) refrigerated incubator, manufactured in 2022, equipped with the extended safety and performance test package "P Plus".   This device is not a standard laboratory incubator, but a high-quality safety test chamber, specifically designed for aging, performance, and safety testing of lithium-ion energy storage units.   Particular Added Value: The device is designed to safely detect, monitor, and contain critical battery events – up to EUCAR hazard level 5 (fire / flames, no explosion).   What can the device do specifically? (Point 2 – Performance & Application)   Conducting aging tests on lithium-ion cells Performance tests (charge/discharge cycles under temperature) Temperature endurance tests and temperature cycling tests Tests of non-energized and cyclically energized cells Reproducible, precise temperature control throughout the usable space Safe execution of tests under realistic thermal conditions   Test environment for R&D, Automotive, E-Mobility, and energy storage technology   Suitable for: Battery & cell manufacturers Research and development laboratories Testing laboratories & safety testing Automotive / E-Mobility / Energy storage   The P Plus package turns the KB 720 into a genuine battery safety test chamber:   Integrated safety functions: Automatic & manual CO₂ fire extinguishing system Smoke detector with optical & acoustic alarm Mechanical double door lock (secure containment) Spark protection in the interior Exhaust port with reversible overpressure valve Connections for external inerting (e.g., nitrogen) Emergency stop / manual activation of the extinguishing system Feedthrough openings for charging and measuring cables   Result: The device is designed for tests on lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur, without resulting in an explosion or uncontrolled spread.   Not an abuse or destruction test device, but a safe, standard-compliant test chamber for real operating and fault scenarios.   Technical Core Data:   Temperature range: – 10 °C to +100 °C   Interior volume: approx. 698 liters Shelves: 4 × stainless steel Max. load per shelf: 45 kg Max. total load: 100 kg   Electrical Data: Mains connection: 200–240 V AC Frequency: 50 / 60 Hz Phase: 1-phase Power consumption: approx. 2.1 kW Fuse rating: 16 A   Refrigerant: R134a   Protection class: IP 20   Dimensions & Weight: External (W × H × D): approx. 1250 × 1950 × 900 mm Internal (W × H × D): approx. 970 × 1250 × 576 mm Hfjdpfx Aioziznfjtsn   In short – why this device is special genuine battery safety test chamber suitable for EUCAR hazard level 5 integrated CO₂ extinguishing system large chamber (≈700 l) high market & resale attractiveness   Weight: approx. 285–300 kg   Documents & Downloads   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data, specifications are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: ready for operation (used), KUKA rotor with binder 86 61104H23 brake for 1FK7034-5AZ91-1ZZ9-Z S09 motor, the screw in the thread of the rotor is torn off, see photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Hfodou Tm E Nspfx Aitsn

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Pulsotronic M-Pulse 2 Metal Detector with Conveyor Brand: Pulsotronic-Anlagentechnik GmbH Type: M-Pulse 2 BD-HD 350x150 LPW MFT Year of manufacture: 2018 Serial number: 90007273 Voltage: 115/230 VAC Frequency: 50-60 Hz Detection opening dimensions: 350 x 120 mm Belt width: 240 mm Hodpfx Ajyr S Nmjitsfn Overall dimensions: 3500 x 900 x 1300 mm The Pulsotronic M-Pulse 2 metal detector is an advanced quality control system from 2018, essential for ensuring food safety in production processes. The device is designed for precise detection of metallic contaminants in products transported on the integrated belt conveyor. With a detection opening of 350 x 120 mm and a robust stainless steel construction, the system is perfectly suited for the food industry, guaranteeing maximum detection sensitivity and easy maintenance of hygiene.

Year of construction: 2020, condition: excellent (used), BINDER FED 400 – 400 L / 300°C Laboratory Dryer – Year 2020 – Fully Functional For sale: a professional BINDER FED 400 laboratory dryer from 2020, manufactured by the German company BINDER GmbH. The unit is in very good technical and visual condition, is fully functional, and ready for further use. The BINDER FED 400 is a high-quality laboratory dryer with forced air circulation, designed for drying, heat treatment, thermal processing, temperature testing, and laboratory and industrial applications. Technical Data * Manufacturer: BINDER GmbH – Germany * Model: FED 400 * Year of Manufacture: 2020 * Chamber Volume: 400 liters * Temperature Range: from 5°C above ambient temperature to +300°C * Circulation System: forced air circulation with adjustable fan speed * Heating Technology: APT.line™ * Control: electronic temperature controller with timer functions Hfjdpoz Si U Sofx Aitjn * Rated Power: 3.4 kW * Power Supply: 400 V, 50/60 Hz (European version) * Chamber Material: stainless steel * Maximum Chamber Load: 90 kg * Maximum Load per Shelf: 35 kg * Device Weight: approximately 145 kg Device Dimensions External Dimensions (width × height × depth): * 1235 × 1025 × 765 mm Internal Chamber Dimensions (width × height × depth): * 1000 × 800 × 510 mm External dimensions do not include additional components and connections. Key Advantages * Large working chamber with a volume of 400 liters * Maximum operating temperature up to 300°C * Precise temperature control * Forced air circulation ensuring uniform heat distribution * APT.line™ technology providing uniform thermal conditions * Electronic controller with timer functions * Adjustable fan speed * Overheating protection * Robust construction from a German manufacturer * Interior made of stainless steel

Condition: good (used), Eurotecnica 425 CUT Perfect Binder This machine is in perfect technical and visual condition and was used as a backup for the BQ-470 binder. Hfsdpfx Aijzz Hftoten Machine features: – automatic jaw clamping – disc milling with additional scoring units – infeed jogging device – side gluing – control panel – fume extraction from the gluing unit – trim extraction + external vacuum – automatic cover clamping 230V power supply The kit includes glue to start with.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, PULSOTRONIC M-Pulse2 BD HD 650X150 MFT | Metal Detector Manufacturer: PULSOTRONIC-Anlagentechnik GmbH Model/Type: M-Pulse2 BD-HD 650x150 MFT Serial number: 90008573 Year of manufacture: 2020 Hsdpfxozagnme Aitjfn Power supply: 115/230 V | 16 A | 50-60 Hz Overall dimensions: 1700 x 1100 x 1250 mm Conveyor dimensions: 1200 x 610 mm Aperture: 650 x 150 mm System operating pressure: 4-6 bar The Pulsotronic M-Pulse2 BD HD, a professional conveyor metal detector, is an advanced X-ray and magnetic inspection system designed for the highest standards of safety and quality control in the food industry (meat, processing, bakery) and logistics. Thanks to the use of multi-frequency technology (MFT), the device features exceptional sensitivity in detecting ferromagnetic, non-ferromagnetic contaminants, and stainless steel, effectively eliminating the influence of the so-called "product effect" (common when inspecting moist meat, cheese, or fresh baked goods). The wide detection head with an aperture of 650 mm x 150 mm allows for the simultaneous inspection of a wide stream of loose products, large blocks of raw materials, or finished dishes in bulk and individual packaging. The integrated conveyor system, with dimensions of 1200 x 610 mm, guarantees complete stability in handling the product range. The system is prepared for an automatic pneumatic reject system (4-6 bar power supply required), which eliminates defective batches of goods without stopping the entire production line.

Condition: used, Year of construction: 2017, functionality: unexamined, machine/vehicle number: VAN18-0015, power: 995 kW (1,352.82 HP), EX Diageo 2017 BINDER / HERZ Biomass-Fired Steam Boiler Plant – Complete System Boiler capacity: 995 kW, as stated on the manufacturer’s nameplate. Complete industrial biomass steam generation plant available from Rosemaund Farm Distillery in Herefordshire, UK. Installed and commissioned in 2017 and formerly operated as part of the Chase Distillery site during its period of Diageo ownership. The plant is now surplus to requirements following a change in production strategy. The installation is offered substantially complete and includes: • BINDER / HERZ biomass-fired steam boiler plant • Hydraulic walking-floor fuel hopper • Screw and inclined fuel conveyors / auger stoking system • Economiser Hfjdpez Ik Aaefx Aiten • Flue gas and ash collection equipment • Ash removal conveyors and collection system • HERZ / BBSM plant control panel • Flue, fans and associated fittings • BYWORTH insulated steam accumulator, approx. 23m³ • Water treatment equipment • Steam blowdown vessel • Condensate recovery unit • Hotwell and associated pipework/platforms Boiler reference: VAN18-0015 Year: 2017 Steam accumulator: BYWORTH M847, 2018 The plant remains installed and can be inspected by appointment. An independent engineering inspection and functional test can be made available to serious purchasers. Sale basis: Ex-works, Herefordshire, United Kingdom. Purchaser to arrange dismantling, loading and transport. Full technical information, photographs and further documentation available on request.

Condition: used, Year of construction: 2012, functionality: fully functional, overall weight: 2,600 kg, type of input current: AC, input voltage: 400 V, 4 x Wagner Permanent Magnet Separators – various models A total of 4 used permanent magnet separators from the manufacturer Wagner Magnete are for sale. Hfedpfx Aioz R Sw Hstjn The magnetic separators were used in our recycling and processing plant and serve to automatically separate ferromagnetic components from different material flows. Due to the restructuring and upcoming reconstruction of our recycling plant, the four magnetic separators are being offered for sale. Technical data of the 4 magnetic separators: Magnet 1: - Manufacturer: Wagner Magnete - Type: 0452-115/130-250 G2 - Equipment number: 546235 - Weight: approx. 2,600 kg - Motor power: 3 kW Magnet 2: - Manufacturer: Wagner Magnete - Type: 0452-115/170-250 G2 - Equipment number: 546236 - Weight: approx. 3,340 kg - Motor power: 3 kW Magnet 3: - Manufacturer: Wagner Magnete - Type: 0452-95/130-250 G2 - Equipment number: 546237 - Weight: approx. 2,200 kg - Motor power: 2.2 kW Magnet 4: - Manufacturer: Wagner Magnete - Type: 0452-95/130-250 G2 - Equipment number: 546986 - Weight: approx. 2,200 kg - Motor power: 2.2 kW Further technical specifications (all 4 magnetic separators): - Belt speed: 1.5 m/s - Motor manufacturer: SEW - Operating voltage: 400 V - Current type: Three-phase (AC) - Frequency: 50 Hz - Protection class: IP55 Condition and sale: All four magnetic separators are in used condition and show corresponding signs of wear and tear due to operation. The magnetic separators can be purchased individually or as a complete package. An on-site inspection is possible after prior appointment. Technical documentation is available. Price upon request. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2013, Heating system for wood fuel (wood chips or logs), can generate steam up to 150°C, but is also suitable for hot water. Hydraulic feed, therefore larger fuel material can also be used. Heating capacity up to 850 kW, but can also deliver up to 1 MW thermal output. The unit is currently in storage. Hjdpfxsyhlrmj Aitjfn

Condition: used, Binder   Temperature Testing Cabinet MK 240 Type: MK240-400V   The Binder temperature testing cabinet from the MK series is designed for heat and cold tests in the range of -40 °C to +180 °C. The MK is particularly an efficient alternative to individual custom solutions, especially for cyclic temperature tests.   For sale is a Binder temperature testing cabinet MK 240 for use in industry, research, development and quality assurance.   Technical data:   Temperature range: -40 °C to +180 °C Spatial temperature deviation: 0.1 to 1.2 ± K (depending on the setpoint) Temporal temperature deviation: 0.1 to 0.5 ± K (depending on the setpoint) Average heating rate: approx. 5.0 K/min (according to IEC 60068-3-5) Cooling time: from +180 °C to -40 °C approx. 110 minutes Average cooling rate: approx. 4.5 K/min   Internal volume: approx. 228 liters Maximum load per shelf: approx. 30 kg Maximum total load: approx. 70 kg   Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D)   External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D)   Feedthroughs: 2 x Ø 70 mm Number of doors: 1 Shelves: 2 (standard) / max. 6   Electrical data:   Rated voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Fuse rating: 16 A Phases: 3~   Weight: approx. 320 kg   Condition   Used Hfsdoy Nic Hepfx Aiton Optical condition as shown in the pictures Normal storage and usage marks are present   Important note: All information has been provided to the best of our knowledge based on the pictures, nameplates and manufacturer information.   Shipping is possible. Subject to changes, errors and prior sale.   We will gladly answer any further questions by telephone.