Used Bihler Strip Metal Decoiler for sale (36,372)

Condition: excellent (used), Year of construction: 1995, loading capacity: max. 40 Kg. disc outside diam. 650 mm bundle outer diam. max. 600 mm bundle innert diam. 170 - 310 mm bundle width: max. 200 mm Crjdpfx Aei T Ir Aoilsh

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake Csdowvv Rqepfx Ailjrh - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Crsdpfsif Sg Sex Aileh Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: 004/2017, The line (multi-purpose automatic machine) is designed for the automatic straightening and cutting of uncoiled flat and metal strip and coil into sheets of various dimensions, with a simultaneous stacking system. The machine was manufactured in Poland in 2017. Crsdpsz Eafxsfx Ailoh Main technical and operational parameters of the line: 1. Overall external dimensions of the entire line: total length – 1230 cm, maximum height – 180/260 cm, maximum width – 320 cm, 2. Length/width/height: receiving table – 400 cm, 130 cm, 87 cm; feeding table – 400 cm, 150 cm, 87 cm. 3. Power supply: electrical 3 x 400V/50Hz 4. Flat sheet parameters – thickness 0.5 mm – 2.0 mm / width – max 1500 mm, perforated sheet parameters – thickness up to 3 mm, width – max 1500 mm. 5. Uncoiling, straightening, and cutting speed – automatically controlled. 6. Max. Load – 5000 kg (5T) [spindle carriage]. Machine construction: 1. Rail carriage, 2. Coil unwinder – for strip and coil, 3. Straightener with adjustable straightening gap, 4. Guillotine shears – for transverse cutting of the strip into sheets, 5. Stacker (trap) for preliminary collection of sheet metal, 6. Wheel-and-spindle carriage for packaging sheet metal, 7. Control cabinet – integrated electrical and electronic systems for power supply, programming, and control. 8. Adjustable control panel with a visual touch screen. 9. Safety devices – guards, emergency stop switches, wire circuit with limit switch, distinctive colors. The construction of the machines that make up the line is based on a monolithic, compact frame and table structure made of steel profiles, angles, closed profiles, flat bars, bracing, and sheet metal cladding. The components are joined by longitudinal, butt, and lap welding, as well as by detachable bolted connections. The machine has been used very little (a few dozen operating hours) due to a change in production plans. It is in perfect condition. The stated price is the net price.

Condition: excellent (used), Year of construction: 1973, functionality: fully functional, loading capacity: max. 700 Kg. Cedpjxtp Eyefx Ailerh disc diameter: 1.000 mm coil outside diam. max. 900 mm coil inside diam. 240 - 560 mm coil width: max. 120 mm

Condition: excellent (used), Year of construction: 1978, loading capacity: max. 700 Kg. disc diameter: 1.000 mm coil outside diam. max. 900 mm coil inside diam. 240 - 560 mm Credpsi Hi Swofx Ailjh coil width: max. 120 mm

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 24-042, overall weight: 200 kg, type of input current: AC, input voltage: 230 V, belt width: 400 mm, Magnet with neodymium head roller (can also separate slightly magnetized stainless steel parts), small conveyor belt (drum motor), and feed chute. The conveyor belt and feed chute are adjustable. Crjdpfez Ihbgsx Aileh The machine is mobile on rollers, available immediately, and the price may be negotiable.

Condition: used, Coil Handler and Straightening Machine EBU Strip Processing Line Straightening Machine EBU, Type RE 7.50-320 Year of Manufacture 2004 Strip Nominal Width 320 mm Strip Width max. 320 mm Strip Thickness max. 3 mm Strip Cross-Section max. 1000 mm2 Power Supply 400 Volts, 50 Hz Unwinding Coil Handler EBU, Type BSH 3/320 Crsdpsz Ek Scofx Aileh Manufacturer 10838, Year of Manufacture 2004 Coil Weight max. 2500 kg Coil Width 320 mm Power Supply 400 Volts, 50 Hz - Central expansion - Drive via geared brake motor - 3 starting arms

Condition: like new (used), functionality: fully functional, Year of construction: 2024, 2024 MODEL COILTECH CMKS A1602D1300 12T Coil Uncoiler, Leveler, and Feeder Machine. Available for inspection at our Gebze warehouse. 1300 mm width, 12-ton carrying capacity. Codpfx Aozdy Ereilerh

Condition: like new (used), Year of construction: 2018, functionality: fully functional, We offer a Steinert permanent overband magnetic separator. The separator consists of the following components: non-ferrous metal separator (NE separator), material guides/covers, ferrous metal separator (FE separator) with permanent magnetic drum and vibratory feeder tray, PLC control cabinet. Price negotiable. The machine has always been stored dry and protected and can be inspected at any time. Cedpfjy Efcbsx Ailerh

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Codpfx Aietgvgpjlorh Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: ready for operation (used), Uncoiler, Sheet Metal Decoiler, Used machine Manufacturer: GSW Schwabe AG Csdpox Emdgsfx Ailjrh Type: LHM 150/800 Overall dimensions: 860 x 740 x 1430 mm Load capacity: 150 kg Sheet width: 150 mm

Condition: excellent (used), Year of construction: 2016, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 565697, type of input current: three-phase, input voltage: 400 V, belt width: 600 mm, conveyor belt width: 600 mm, The Wagner non-ferrous metal separator (NE separator), model 0429 from Wagner Magnete, is one of the manufacturer’s high-performance eddy current separators. Working width: 600 mm. • Throughput: depends on the material and grain size. • Rotor speed: up to 3,000 revolutions per minute. • Belt speed: 0.5 to 2.0 m/s. • Weight: 1.2 tons. • Rotor system: Eccentrically mounted with a high pole-changing frequency. • Rotor drive: 4 kW; belt drive: 1.5 kW. The machine and the associated control panel are included in the delivery. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or in the production facility. Csdpfszl Rfxox Ailjrh The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.

Condition: good (used), Number of guide rollers: 5 Codpfx Ajgvl U Roilerh Sheet width: 430 mm Sheet thickness: 1 mm Top roller diameter: 2 top rollers - Ø 60 mm Bottom roller diameter: 3 bottom rollers - Ø 60 mm

Condition: used, Year of construction: 2015, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 55 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 200 mm, table width: 200 mm, table length: 3,200 mm, throat depth: 320 mm, clearance between the columns: 2,530 mm, retraction force: 160 t, oil tank capacity: 200 l, total length: 3,280 mm, total width: 2,700 mm, total height: 2,000 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, We offer a used Metal Technics 3200/160 E200 press brake, manufactured in 2015. The press is currently in operation in a production environment. It operates in an intermittent cycle, in a single-shift mode – 8 hours. Oil is changed regularly. Equipment: PRESS BRAKE Model: 3200/160 E200 Serial number: 48342 Crodpfjy Um S Nex Ailjh Year of manufacture: 2015 Motor power: 11 kW Weight: 11500 kg Includes tooling (punches and rotating die). Punch mounting type: Amada. Equipped with light curtains and two backstops. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, Equipment: CE marking, TECHNICAL SPECIFICATIONS DOUBLE MANDREL DECOILER MILLUTENSIL TYPE SL MD 600: Model: SL MD 600 Type: 600x400 Serial number: SM2-0043 Year of manufacture: 2010 Max. load per mandrel: 600 kg Credpfx Aieyt Eldsleh Max. strip width: 400 mm Max. strip width with arms: 300 mm Min. opening: 360 mm Max. opening: 620 mm Revolutions per minute: 16 Installed power per mandrel: 1.1 kW Voltage/frequency: 400 V / 50 Hz Auxiliary voltage: 24 V Weight: 1,000 kg Machine is in excellent condition. Complete with user manual and CE conformity declaration.

Condition: good (used), functionality: fully functional, Motorized decoiler, manufacturer SOPREM Load capacity: 200 kg Coil diameter: 900 mm Maximum strip width: 220 mm Expanding range: approx. 240 - 550 mm Crodpfjztknvsx Aileh

Condition: like new (used), Year of construction: 2024, functionality: fully functional, total width: 750 mm, total length: 1,300 mm, axle spacing: 1,300 mm, Overband magnet. Self-cleaning. Suitable for conveyor belts with a working width of 1000 mm. With frame. Crjdpjx Npqdofx Ailjh

Condition: excellent (used), functionality: fully functional, actuation type: mechanical, coil inner diameter: 200 mm, coil outer diameter: 800 mm, coil weight: 100 kg, coil width: 220 mm, for sale AMADA ORII manual sheet metal winder cable winder manufacturer/type AMADA ORII ST 02 Z coil width: max 220mm coil inner diameter 200-500 mm Cedpfx Aijxvitvelorh coil outer diameter: 1100mm coil weight max 100kg

Condition: used, Unwinding and rewinding reel for coil material, HMS type BA 1.5-06/80 Machine No. Year of manufacture 1991 Coil weight max. 8000 kg Coil outer diameter max. 1600 mm (with loading carriage) Coil outer diameter max. 2000 mm (without loading carriage) Diameter of the coil running disk Ø 1700 mm Coil inner diameter, spreading range 460-520 mm Coil width, nominal width max. 630 mm Width of the spreading jaws 750 mm Height of the reel crown above the base plate 1500 mm - Drive of the reel crown via hydraulic motor with gearbox and gear Cedpohx R Etsfx Ailjrh - Pneumatic trailing brake on the reel crown TWINFLEX - Hydraulic operating brake - Hydraulic stop brake - Hydraulic spreading of the reel crown, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading carriage with 12 ton lifting capacity and 300 mm stroke - Reel on above-ground travel frame with motorized lateral travel drive - Hydraulic unit located nearby (also used for other functions on a conveyor system) - Without electrical control cabinet (or, there is an electrical control cabinet that supplied the entire conveyor system) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Own weight approx. 5 tons Good condition - not electrically operational.

Condition: good (used), functionality: fully functional, Decoiler for up to 150 kg coil weight, stepless speed adjustable from 5 to 25 m/min. Rjbmnaoyyvzkj Sh Uer Crjdpfx Aiszwt Nqeljh

Condition: used, Year of construction: 1996, Straightening machine manufactured by GSW, type RMZ 50/54. Press force approximately --- tons. Year of manufacture 1996. Concise summary provided – a full technical translation will be provided if required for this lot. Crodpfx Aijzypt Djljh

Condition: good (used), Year of construction: 1983, 1 used SCHLEICHER strip straightening machine with unwinding reel Maximum sheet width: 320 mm Minimum sheet thickness: 0.8 mm (the customer has also processed sheets with a thickness of 0.4 mm) Maximum sheet thickness: 3 mm Number of upper straightening rollers: 3 Number of lower straightening rollers: 3 Diameter of the straightening rollers: 70 mm Total power consumption: 1.4 kW Machine dimensions L x W x H: approx. 1300 x 1200 x 1800 mm Machine weight: approx. 1000 kg Cedpfxezphauj Ailorh Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here, we offer a complete Desktop Metal 3D printer system. 3D metal printer studio system from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System includes: 1.1 Desktop Metal Studio 3D printer Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell infills for lightweight strength. 1.2 Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. Crodpfx Aszd Tlloileh 1.3 Desktop Metal Studio Sintering Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles tailored to each design and material ensure uniform heating and cooling without the residual stresses found in laser-based systems. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, Aspo Load capacity: 30,000 kg Crjdpfx Aiozy Un Hjljh Maximum belt width: 2,000 mm Minimum belt width: 400 mm Maximum coil diameter: 1,850 mm Minimum diameter: 900 mm