Used Biesse Movable Jaw Clamp for sale (12,578)

Condition: good (used), Electronic self-centering through-feed clamping device NC400 control unit Adjustable dimensions: Length: from a minimum of 250 mm to a maximum of 2500 mm Width (depth): from 180 mm to 780 mm Gjdpfx Amjzfpulsuoiw Minimum height: 300 mm, maximum height: 1300 mm

Condition: good (used), Clamping jaws for round samples -Manufacturer: VAS, Clamping jaws for round samples, 4 pieces -Type: 15-30 mm -Dimensions: see photo technical drawing -Case dimensions: 270/230/H80 mm -Weight: 6.2 kg Gisdpfxjmiqm Ss Amuew

Condition: good (used), Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, clamping claws, pull-down clamp, pull-down jaw, side clamp -Manufacturer: Lenzkes, clamping claw clamping jaw Gisdpfx Amju N Sgmjujw -Type: Backe 3 JSG -Clamping jaw: 100 x 50 mm -Clamping height: max. 210 mm -Groove width: 32 mm -Dimensions: 255/100/H120 mm -Weight: 10.7 kg

Condition: good (used), Interchangeable jaws, top jaws, segment jaws, clamping jaws, block jaws, base jaws, four-jaw chucks, four-jaw lathe chucks, 4-jaw chucks, faceplate, faceplate chucks, facing lathe chucks, clamping device for dividing head Gisdsv U R Ehepfx Amuew -Clamping jaws: 4 pieces for four-jaw chuck, faceplate chuck, dividing head -Clamping width: 55 mm -Dimensions: see photo -Shipping/Price: complete -Dimensions: 200/60/H140 mm -Weight: 3.4 kg/piece

Condition: good (used), Rolling jaws, floating center jaws, pull-down jaws, machine vice jaws -Clamping jaws: 2 pieces ground steel jaws width 160 mm -Hole spacing: 100 mm / Ø 11 mm Giodpowb Aknjfx Amuew -Shipping/Price: complete -Transport dimensions: 160/65/36 mm -Total weight: 2.8 kg

Condition: used, Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, pull-down clamp -Manufacturer: WILA, stable clamping jaw height adjustable -Clamping jaw: 120 x 45 mm Giodpfsu N Sh Dox Amuow -Clamping height: 85 - 105 mm -Groove width: 28 mm -Dimensions: 240/120/H90 mm -Weight: 10.6 kg

Condition: used, Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, clamping claws, pull-down clamp, pull-down jaw, side clamp -Stable clamping jaw: Stable clamping jaw height adjustable -Clamping jaw: 120 x 30 mm -Clamping height: max. 225 mm -Groove width: 25 mm -Number: 4x clamping jaws available Gjdpsu Rv R Eefx Amuoiw -Price: per piece -Dimensions: 240/120/H130 mm -Weight: 15.1 kg/piece

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: Clamping aid Giodpfx Amsb A Nqwsusw -Clamping plate -Mouth size: Ø 255 mm -Weight: 20 kg

Condition: used, Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-grooved plate comes from: from a milling machine -Travel: approx. 1200 mm -Width: 700 mm -Length: 2000 mm -Height: 510 mm -Plate thickness: mm -Table height: mm -Plate: is solid Gijdpfsduiwwox Amuow -Groove width: mm -Dimensions: 3030/850/H510 mm -Weight: approx. 1200 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck, three-jaw chuck with clamping plate Gedpfjhbwc Asx Amujiw -Manufacturer: Röhm, three-jaw chuck with clamping plate -Mouth size: Ø 250 mm -Passage: Ø 76 mm -Mounting plate: 500 x 310 mm -Overall dimensions: 500/310/H300 mm -Weight: 72 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Manufacturer: Forkardt, clamping claw clamping jaws for manual and power chucks -Clamping claw: Type SKA 140-32 -Clamping jaws: Type KBN 12 -Dimensions: see photo Giedpfxjtigw Tj Amuew -Total dimensions: 105/200/H80 mm -Total weight: 4.3 kg

Condition: excellent (used), Low-voltage jaw (28144) Low-voltage clamping jaw Manufacturer: AMF Type: 6494-19 Groove width for screws up to 19 mm Thickness h1 = 25 mm Overall length 150 mm Overall width 50 mm Gisdpfjg Er Igsx Amusw Overall height 60 mm 3 pairs available Weight per pair: 3 kg Original price per pair: 271 Euros

Year of construction: 1980, condition: good (used), Movable positioning table, manufacturer WAGNER, type FE4000, year of manufacture 1980. Travel distance: 4,000 mm Giodpfx Ameg Uf I Aeusw Table surface: 4,000 mm x 1,400 mm Feed rate: 8 - 2,500 mm/min Rapid traverse: 4 m/min Load capacity, max.: 12,500 kg Weight, approx.: 12,000 kg In good condition. Hydraulic clamping and worm gear drive.

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Jaw width 70 mm Jaw length 180 mm Jaw carrier height 150 mm Godeu Axzkepfx Amueiw Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Good condition

Condition: like new (used), functionality: fully functional, Clamping elements Dimensions, W x D approx. 100 x 150 mm Overall height 91.5 mm Jaw width 30 mm Lowest support height on jaws 68.5 mm Middle support height 80 mm Clamping height per jaw approx. 11.5 mm Gedezadayopfx Amueiw Jaw clamping travel approx. 25 mm

Condition: used, Workbench vice, parallel vice LEINEN with dovetail guide and height adjustment. Model: 125. Jaw width: 125 mm. Jaw height: 23 mm. Clamping range: max. 200 mm. Overall height: 550 to 750 mm. - 360° rotatable. - Dovetail guide. - Anvil surface for light straightening work. - Approx. 200 mm height adjustment without lift system. Weight: 44.5 kg. Good condition. Gjdpfx Asy E T Dyemueiw

Condition: used, 3-jaw wedge-bar lathe chuck FORKARDT TYPE F+160 No. 1659 181 Identical to Forkardt, SMW, or Röhm Diameter: 160 mm Internal diameter: 45 mm Chuck flange: short taper DIN 55022, size 6 1 set of chuck jaws consisting of base jaws and hardened step jaws for turning 1 set of chuck jaws consisting of base jaws and soft step jaws for turning Gjdpsf Axprefx Amujiw - central adjustment Weight: 11 kg Good condition

Condition: used, Faceplate made of cast steel, probably PUT (Poland), with 4 individually adjustable clamping jaws. Type PUUf-M400C6ZJ, No: 3033. Diameter: 400 mm. Inner diameter: 100 mm. Mounting: short taper DIN 55022 size 6 with 4 M12 mounting bolts. Taper mounting: Ø approx. 106 mm. - 1 set of reversible stepped jaws for turning and drilling. Weight: 56 kg. In good condition. Gjdpfx Amsxf Uxcsusiw

Condition: used, 4 clamping elements, down-hold clamps, heavy-duty clamping jaws, clamping plate LENZKES type 170796 Plate clamps, flat clamps, deep-jaw clamps, deep clamping jaws, low-profile clamps, clamping jaws Length: 280 mm Width: 200 mm Height: 113 mm Clamping plate width: 89 mm Mounting slot distance: 62.5 / 125 mm Mounting slot width: 27 mm Mounting slot length: 145 / 185 mm Construction height of mounting slot clamping surface: 58.5 mm - Down-hold action via hex socket screw SW17 - Clamping movement via trapezoidal thread spindle - Reversible jaws for use on either side along the trapezoidal spindle - Reversible clamping jaws with dovetail guide for changing sides Gjdpfx Aoxy Stgsmusiw - 3 elongated mounting holes for fastening to the machine table Weight per clamp: 15.5 kg Total weight: 62 kg Very robust design Very good condition

Condition: good (used), 3 sets of used soft one-piece clamping jaws for 3-jaw spiral chuck BISON 630 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Gjdpfx Aowz Ikmomueiw

Condition: used, machine/vehicle number: 008109, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Gjdpfjw Idc Dex Amuoiw Maximum panel thickness: 12 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Gedpfxowuz Eke Amujiw Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: used, Year of construction: 2013, total height: 2,700 mm, total length: 2,000 mm, total width: 2,600 mm, Colour: White Empty weight: 1.500 kg Price: On request Gedpfx Amezldzyousiw - Year: 2013 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 72122 - Main motor power [kW]: 4 - Number of controlled axes [pcs]: 3 - Working range X [mm]: 2500 - Working range Y [mm]: 900 - Working range Z [mm]: 70 - Number of milling spindles [pcs]: 1 - Tool holder interface: ISO30 - Min. spindle speed [rpm]: 12000 - Max. spindle speed [rpm]: 24000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 6 - Vertical drilling unit: Yes - Vertical drilling spindles [pcs]: 10 - Manual operation: Yes - Saw unit present: Yes - Safety feature: - Spindle speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 22 - Fuse [A]: 32 - Power [kW]: 12.0 - Transport dimensions: 2000mm x 2600mm x 2700mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Godpsy Ehrxofx Amuoiw Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: used, machine/vehicle number: 008607, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 6 No of Top Units: 4 Lateral horizontal groups: yes Gijdszcmn Ejpfx Amuow