Used Biesse Biesse Selco Wntr 600 for sale (11,802)

Condition: ready for operation (used), Year of construction: 2002, cutting length (max.): 4,500 mm, This 4-axis BIESSE Selco WNTR 600 was manufactured in 2002. It features a maximum blade projection of 120 mm to 132 mm and cutting lengths of 3,200 mm, 3,800 mm, and 4,500 mm. The machine is equipped with a powerful main saw motor ranging from 13.5 kW to 18 kW and a saw carriage speed of up to 150 m/min. If you are looking to get high-quality panel cutting capabilities, consider the BIESSE Selco WNTR 600 machine we have for sale. Contact us for further details. • Max. blade projection: 120–132 mm • Cutting lengths: 3,200 / 3,800 / 4,500 mm • Main saw motor: 13.5–18 kW • Main saw blade diameter: 430 mm • Scoring saw blade diameter: 200 mm • Saw carriage speed: up to 150 m/min (brushless drives) Bsdoz Dhmuepfx Amrsln • Pusher speed: up to 90 m/min • Pusher grippers: independent pneumatic grippers • Control system: OSI (Open Selco Interface) / OSI Plus numerical control • Machine layout: angular panel sizing system with two orthogonal cutting lines for automatic rip and cross-cutting

Condition: good (used), Year of construction: 2001, I sell the panel beam saw BIESSE SELCO EB70. Year 2001. Cutting size 3200x3100mm. Cutting height 55mm. Main motor 7,5kW Scoring motor 2,2kW Total area covered W.5422mm x D.6488mm Gripper with pneumatic regulation Bjdpfez Ii Arox Amroln Side alignment top roller with pneumatic stroke. Optimising software included. Very good condition. Available immediately.

Condition: ready for operation (used), Year of construction: 2022, This BIESSE Selco WNT 630 panel saw was manufactured in 2022. It features a maximum cutting length of 3800 mm, saw blade projection of 108 mm, and a lift table capacity of 5 tons. Ideal for handling large panels up to 3660 x 2200 mm. If you are looking to get high-quality cutting capabilities, consider the BIESSE Selco WNT 630 machine we have for sale. Contact us for more information. • Working size: 3800 x 2200 mm • Max cutting length: 3800 mm • Saw blade projection: 108 mm • Max gripper opening: 100 mm • Min panel size: 1830 x 915 mm • Max panel size: 3660 x 2200 mm • Max packet height: 630 mm • Condition: Almost new, used only a few months Additional equipment Blsdpfxozug E Hj Amren • Back lift table: • Minimum panel thickness on lift table: 10 mm • Maximum lift: 985 mm • Lift table capacity: 5 t

Condition: used, Year of construction: 2022, - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t Panel dividing saw Manufacturer: Biesse Type: Selco WNT 630 Year of manufacture: 2022 Technical data - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t Blodpfx Amszuyl Tjren The machine is almost new and has only been used for a few months. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2018, machine/vehicle number: 1000023651T, functionality: fully functional, power: 50 kW (67.98 HP), input frequency: 50 Hz, cutting height (max.): 95 mm, cutting width (max.): 3,200 mm, Equipment: documentation/manual, Selco WNAR 6 miter saw center. Bljdpfx Aezl T Hlsmrjn

Condition: used, Year of construction: 2022, total length: 8,000 mm, total width: 2,400 mm, total height: 2,400 mm, Colour: Grey Weight: 3.969 kg Price: On request - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 1000056636 - Max. cutting length [mm]: 3200 - Max. cutting width [mm]: 3200 - Transport dimensions: 8000mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 3969kg - Transport packages [pcs.]: 4 Bljdjy E Hdgepfx Amron Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 1991, condition: excellent (used), Fully automatic gate system HDN 600 with automatic infeed ZE, including mechanization. Technical data: Passage height: 700 mm Passage width: 735 mm Stroke: 600 mm Bodpfx Aoz Ehfasmreln Feed rate: max. 15 m/min Water-cooled guides Drive – Gearbox The system has demonstrably only been in operation for 10 years.

Condition: used, Year of construction: 2011, - max. panel width 4500 mm - max. panel length 2200 mm - max. saw blade projection 127 mm - main saw 18.5 kW - scoring saw 2.0 kW - with lifting table used panel dividing saw Manufacturer: Selco Type: WNTR 730 Year of manufacture 2011 Technical data: Max. panel width 4500 mm Max. panel length 2200 mm Max. saw blade projection 127 mm with lifting table 9 grippers on the sliding fence Flexible grippers for positioning via NC Max. feed rate 130 m/min 1 saw unit with positioning via NC Bledszuyxmopfx Amrsn max. tool diameter 470 mm Motor power 18.5 kW Scoring unit max. blade diameter 200 mm Motor power 2 kW Quick-change device QUICK CHANGE SYSTEM Max. feed rate 185 m/min Machine programming software OSI Barcode label printer Barcode scanner Total installed power 44 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2011, Panel dividing saw Manufacturer: Selco / Systraplan Type: WNTR 710 Year of manufacture: 2011 with SYSTRAPLAN supporting table Technical data Cutting length: 4300 mm Bodjzuyxyjpfx Amreln Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2008, I sell the panel beam saw BIESSE SELCO EB75. Year 2008. Cutting size 3800x3800mm. Cutting height 75mm. Main motor 7,5kW Scoring motor 2,2kW Total area covered W.5422mm x D.7688mm Gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. Bledpfjvw Nkhox Amron Optimising software included. Very good condition. Available immediately.

Condition: used, Year of construction: 2014, cutting depth: 123 mm, plate length: 2,200 mm, plate width: 4,500 mm, table length: 4,500 mm, table width: 2,200 mm, The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Plate width max.: 4,500 mm Plate length max.: 2,200 mm Cutting depth max.: 123 mm Number of grippers: 10+1 Main sawing unit Feed rate max.: 90 m/min Scoring unit Max. feed rate: 140 m/min Lifting table: 4,500 x 2,200 mm MACHINE DETAILS Programming software: OSI Motor power, main saw blade: 18.5 kW Motor power, scoring unit: 2.2 kW Total installed power: 41 kW EQUIPMENT Bljdszf H N Hepfx Amrjn Lifting table Pre-loading roller table Barcode label printer (Model: ZEBRA ZT230) Rotational station Front support table Flexible gripper for NC positioning Second flexible pusher Plate rotation station The machine will be sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8549

Condition: used, machine/vehicle number: 007816, Position 1: Automated Warehouse BIESSE-SELCO SK 450 Position 2: Beam panel saws with automatic warehouse BIESSE-SELCO SK 450 Bljdpfxewuufqj Amrsn

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 1000056636, functionality: fully functional, cutting width (max.): 3,200 mm, total length: 8,000 mm, overall weight: 3,969 kg, cutting length (max.): 3,200 mm, TECHNICAL DETAILS Max. cutting length: 3,200 mm Max. cutting width: 3,200 mm Bljdpfxoy Nxvcs Amrjn MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 8,000 x 2,400 x 2,400 mm Weight: 3,969 kg Supply voltage: 400 VAC Number of supply phases: 3 Power: 4 kW Frequency: 50 Hz EQUIPMENT Documentation CE marking

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 60 mm, overall weight: 3,000 kg, Equipment: CE marking, Biesse Skipper 100 CNC Drilling Machine – 2013 Well-maintained Biesse Skipper 100 CNC drilling and processing machine in very good working condition. The machine was originally manufactured in 2013 and has since been refurbished. It has been carefully maintained and is currently in excellent condition for its age. The machine is being sold only because the current owner has recently invested in a new Biesse drilling machine. It has therefore become surplus to production requirements. Bsdpfjz Ibqbjx Amreln The Skipper 100 is a highly versatile CNC machining solution designed for drilling, routing, and panel processing. Its compact design and flexible operation make it particularly suitable for furniture, cabinet, and panel manufacturing applications. Key Highlights: Manufacturer: Biesse Model: Skipper 100 Year: 2013 Refurbished Very good mechanical and operational condition Regularly maintained Suitable for CNC drilling and panel processing Proven Biesse industrial construction Machine is available due to replacement with a newer Biesse drilling machine, not because of technical issues The machine can be inspected by appointment. Further technical information, photos, videos, and machine details can be provided upon request.

Condition: used, machine/vehicle number: 008438, Max. panel width: 4500 mm Max. panel length: 4500 mm Blsdpfxjyngy Se Amrjn Main saw blade projection: 50 mm No of Grippers: 8

Condition: good (used), Year of construction: 1998, I sell the 3-axis CNC working centre Biesse Rover 13S with beam table, year 1998. Configuration: 3-axis main spindle HSD 1 grooving saw X-direction Drilling head 10+4+2 spindles Bljdpjz Ii Axofx Amren Useful working area 1540x1050mm. 1 working field, 2 clamping areas Total power 10kW Pump Becker Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately.

Condition: excellent (used), Angular sawing plant Numerical Control OSI Plus - Software Optiplanning N. 2 Pre-loading roller tables (mm) approx. 4500 x 2200 each Lifting table (mm) 4500 x 2200 1° Rear-pusher, with No. 5 clamps/grippers Turning device (rotating unit) at 90° 1° Panel saw (longitudinal) max. cutting width (mm) 4500 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 ( Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min Cutter for shredding trimmings Bljdpfx Aoukhd Asmrjn 2° Rear-pusher, with No. 10 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 (Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min No. 2 Front supporting tables with Air blowing system mm 2200 x 1500 Automatic unloader (bridge) for cut panels "RBO (BIESSE)" Mod. Lifter with 6 stacking stations

Condition: used, Year of construction: 2014, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, working width: 3,200 mm, The machine has the following configuration: Number of machining units: 8 Pressure bar: With rubber belt Panel support stop: Present Overpressure: Present CNC positioning: Present Panel infeed trimming system: Present Number of units in the trimming area: 1 Number of units in the edge processing area: 6 Trimming unit Unit: Flush trimming unit Manufacturer/Model: RT30 Automatic time intervention: Present Motor power: 3.5 kW Speed: 9,000 RPM Edge banding Glue application system: EVA Heating lamps for edges: Present Edge magazine: Roller magazine Number of magazine positions: 6 Hot melt glue tank: Present Hot melt glue pre-melter: HM20 Pressure roller unit: Present Number of pressure rollers: 4 CNC positioning: Present End capping unit Manufacturer/Model: IT90-S Number of motors: 2 Maximum processing speed: 28 m/min Motor power: 0.65 kW Speed: 12,000 RPM Corner milling unit Manufacturer/Model: RF10 Number of motors: 2 Motor power: 1 kW Speed: 12,000 RPM Corner rounding unit Manufacturer/Model: AR30 Number of motors: 2 Automatic tool changer: Present Maximum processing speed: 18 m/min Motor power: 0.65 kW Speed: 12,000 RPM Edge scraping unit Manufacturer/Model: RB40 CNC positioning: Present Glue scraping unit Blsdpfez Ekh Djx Amron Manufacturer/Model: RC20 Brushing unit Manufacturer/Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Speed: 1,400 RPM TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 150 mm Minimum panel width: 100 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Electrical connection power: 25 kW EQUIPMENT CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5062

Condition: excellent (used), Working area X: 5,920 mm Working area Y: 1,287 mm Working area Z: 170 mm C, A axes: available Swivel machining: 2 working areas for swivel machining Work table: ATS-HTS-EPS Bljdpszxbhwsfx Amrjn Automatic console positioning system EPS 10 automatically positionable consoles 2 locating pins per console 5-axis milling spindle: Power: 9 kW / 11 kW at 60 Hz Speed: up to 24,000 rpm Tool holder: HSK-F63 Liquid-cooled Drilling head BH 26 16 vertical drilling spindles 4 horizontal drilling spindles in the X direction 2 grooving units for grooves in the X and Y directions Vertical drilling spindles 16, Horizontal drilling spindle X = Tool changer: Chain tool changer with 21 tool positions Clamping systems: Uniclamp clamping system - 6 pieces Control system: BIESSE XP 600 Chip removal: Motorized conveyor belts for the removal of chips and machining waste Vacuum pump BECKER: Motor power 5.5 kW Conveying capacity: 244/286 m³/h Additional equipment: Numerous vacuum suction cups; 6 UNICLAMP clamping systems; Numerous HSK 63 tool holders; 2 large saw blades in the tool magazine Compressed air: 7-7.5 bar Total power: 25.3 kW Weight: 4200 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Working area X: 3855 mm Working area Y: 1650 mm Z-axis workpiece clearance: 245/290 mm 5-axis electrospindle, HSK F63 mounting Main electrospindle power: 16 kW Drilling spindles for vertical drilling: 5 Drilling spindles for horizontal drilling X: 2 Drilling spindles for horizontal drilling Y: 2 22-position chain-type tool changer Work table with 8 rails Automatic EPS tables Software: Biesse bSolid Vacuum pump with a capacity of 250 m3/h Chip conveyor belt Safety guards Safety device compliant with CE standards, with impact bar and double light curtain Approximate weight: 5800 kg Only 2774 operating hours Includes Uniclamps for window and door frames Bedpfxez Hxmqe Amroln Available immediately

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Bledpfozuwyzox Amron Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Condition: used, Year of construction: 2010, Working range X = 4,600 mm Y = 1,535 mm Z = 275 mm Designed for heavy-duty applications, making it ideal for machining large solid wood components and structural timber. The 5-axis controlled machining head enables the production of complex three-dimensional workpieces. • Central lubrication system • Desktop PC o Intel Celeron D CPU 2.66 GHz or higher o 512 MB RAM o 40 GB hard drive o 15" LCD monitor o Keyboard o Mouse o CD-ROM drive o Parallel port o RS-232 serial port o USB port o Ethernet card for connection to the office network • Remote service o Direct modem access for remote diagnostics and service • Electrical control cabinet • Air conditioning for the electrical cabinet • Safety system o Two pressure-sensitive safety mats on the front side of the machine with integrated control unit, ensuring safe alternating operation. • Signal lights for alternating (pendulum) machine operation • Job recovery function o Allows machining to resume after an emergency stop. • CE safety protection systems Worktable and accessories • Multizone table for 10 beams and 40 vacuum pods o Allows multiple workpieces to be loaded simultaneously, reducing tool changes and increasing productivity. o Vacuum clamping system o Pneumatic clamping system • 10 ATS beams, each equipped with 4 vacuum pods, L = 1,525 mm • EPS electronically positioned table for 10 beams • Rear stop row for 10 beams with 115 mm travel • Additional stop row at 375 mm with 140 mm travel • Additional stop row at 770 mm with 140 mm travel • Front stop row at 1,175 mm with 140 mm travel • 4 side stops with 140 mm travel (2 left + 2 right) complete with mounting hardware • 2 additional side stops with 140 mm travel (1 left + 1 right) complete with mounting hardware • Position sensors for all stops • 4 lifting devices for easier loading and unloading of workpieces for H = 74 mm modules • Vacuum unit 132 × 146 × H74 mm • Vacuum unit 132 × 75 × H74 mm • Vacuum unit 132 × 54 × H74 mm • UNICLAMP workpiece clamping system • Window manufacturing kit H = 74 mm, 40–98 mm • 6 UNICLAMP double-acting quick-connect clamps • 2 UNICLAMP modules for short workpieces • Chip and waste conveyor • Vacuum generator for 250 m³/h vacuum pump o 250 m³/h vacuum pump • Spindle and machining equipment • Motor power: o 12 kW at 12,000 rpm (S1 duty) o 15 kW at 12,000 rpm (S6 duty) • Maximum spindle speed: 22,000 rpm • Tool interface: HSK F63 • C-axis: continuous 360° • B-axis: ±100° • Coolant unit with 1,600 W cooling capacity • 15-position tool magazine for the 5-axis head • Additional Z carriage for rear units • 8.6 kW PEAK POWER electrospindle with HSK F63 interface and air cooling, specially designed for applications requiring high torque at low spindle speeds • Gear-driven C-axis rotating unit (360°) • BH9 drilling unit o 9 independently controlled drill spindles o Includes: o 5 vertical drills with 32 mm spacing o 2 independent dual-output horizontal drills o Separate 3 kW drive motor • 22-position tool magazine with 180 mm centre distance • Automatic lubrication system Two Leitz tool sets are available for EUR 19,000 + VAT: • LEITZ IV 68 tool set Bodezlz Svjpfx Amrjln • LEITZ IV 90 tool set This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 1000024667, functionality: fully functional, input voltage: 400 V, input current: 21 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,600 mm, workpiece width (max.): 900 mm, workpiece height (max.): 60 mm, workpiece weight (max.): 50 kg, total height: 28,840 mm, total length: 64,500 mm, total width: 21,320 mm, overall weight: 1,800 kg, Equipment: CE marking, documentation/manual, For sale: Biesse Brema Eko 2.1 CNC machining center. Machine from 2018, very little use. Operating hours: - Drilling head: 2883 hours - Electrospindle: 535 hours - Saw: 1253 hours Machine condition: Very good Program: bSuite3 The Biesse Brema EKO 2.1 is a compact and versatile CNC machine that enables the processing of parts of various thicknesses and sizes while taking up less space. It is an ideal solution for "just-in-time" production for craftsmen, small businesses, and for the production of special parts in large companies. Panel dimensions: Panel length (X): 200 – 2600 mm, Panel width (Y): 35 – 900 mm, Panel thickness (Z): 8 – 60 mm, Maximum panel weight: 50 kg. Blodpfx Aoz Azbfjmron BH17 self-selecting drilling unit with 14 vertical spindles + 8 horizontal spindles + 1 120 mm diameter grooving saw, 5.5 kW (6 HP) electrospindle with ISO30 mounting, Foot pedal for opening/closing the clamp Extensions for loading and unloading the table.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Automatic edge banding machine Bedoz Evg Espfx Amroln Information available upon request.

Condition: used, Xp 600 Numerical Control with Biesse Works Software Working range in X axis 3000 mm Working field in Y axis 1000 mm Working field in Z axis 60 mm Automatic loading system with motorized belt transfer N° 2 Pliers for blocking and transporting the panel N° 1+1 vertical electrospindle 3 axes (lower + upper) N° 1+1 independent blade (lower + upper) Blsdpfouickyjx Amrsn N° 29 + 29 independent spindles for vertical drilling in "X and Y" direction (upper + lower) N° 10 + 10 independent spindles for horizontal drilling in "X and Y" direction (upper + lower) Automatic unloading system with motorized belt transfer