Used Bcs British Converting Solutions Printers From Bcs Autobox for sale (34,010)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, For sale are two flexographic printing units removed from an Autobox 2600+2x FelexoPrint+Multicut machine. The machine has a working width of 2600 and is from 2017. The printing units are practically unused and come with ceramic anilox rollers. Dsdpfx Aezq Eg Usl Ajwc The maximum printing format is 1150 x 990 mm.

Condition: defective spare-parts repository (used), SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has been running on argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser-on time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was at the beginning of 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during an ongoing job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Dwedpfx Aozhlr Ejl Aoc Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) SLM 280 machine Control cabinet Process chamber Internal operating panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 1013, REF: MM6216 1 X Comek vertical form, fill and seal bagging machine. Technical specification ⚙️ ✅ Manufacturer - Comek Automatic Packaging Solutions ✅ Model - VPB 330 EVO. ✅ Date of manufacture - 2019. ✅ Weight - 2,500 Kg ✅ Installed power - 10 Kw ✅ Sealing jaws - 330mm (horizontal) x 460mm (vertical). ✅ Overall dimensions - 2000mm long x 1500mm wide x 1800mm high. Note 🗒️ Djdexd Ubnepfx Al Aewc No printer.

Year of construction: 2017, condition: ready for operation (used), Granulator THM ZM 600 / MeWa UG 600 Dsdpezhg Eyefx Al Aswc Drive power: 55 kW Rotor length: 600 mm Rotor diameter: approx. 480 mm Number of knives: 18 rotor knives and 3 stator knives Rotor speed: The machine can operate at 4 different speeds if required: 257 rpm / 317 rpm / 343 rpm / 422 rpm. Weight: approx. 5500 kg Control cabinet brand new (original from THM recycling solutions GmbH) Hydraulic feed pressure device (HNDE), feed hopper

Year of construction: 2012, condition: excellent (used), easyFrame is a semi-automated solution for canvas framing, by Imaging Solutions AG. It can process to 50 frames per hour (depending on the operator). Machine is exellent state. It has frame mounts to produce stretchers from 8x6 to 43x43 inches canvases. Dwodpfx Alon Ut Hco Asc

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! The printing machine consists of the following modules: OCE PAPER INPUT MODULE STANDARD B1 Dwedozkhl Topfx Al Ajc OCE INPUT INTERFACE MODULE B1 OCE PAPER INPUT MODULE OPTIONAL B1 OCE OCE IHCS2.1 SETFIN B2 TECHNICAL DETAILS Dimensions Pal 1051330: H: 114 cm, W: 72 cm, L: 95 cm Dimensions Pal 1051331: H: 113 cm, W: 72 cm, L: 56 cm Dimensions Pal 1051237: H: 147 cm, W: 130 cm, L: 160 cm Dimensions Pal 1051238: H: 192 cm, W: 74 cm, L: 119 cm MACHINE DETAILS Counter readings according to the previous owner’s information, not verified and without warranty. Counter reading B/W A4: 458,756 Counter reading Duplex B/W A4: 939,266 Counter reading B/W A3: 151 Counter reading Duplex B/W A3: 5,677

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Ilpra Packaging Solutions thermoformer fitted with Siemens S7 1200 PLC control panel and ILPRA thermo-transfer printer mod. I-PRINT (printing area 53 x 400mm). Supplied with 5 x sets of tooling. Manufacturer - ILPRA S.p.A. Model - Formpack F0 TMF Long Version. Date of manufacture - 2019. Can be used for flexible, semi-rigid and rigid film packs. Speed - Output with sizes 2.2 and 4.2: approx 4/5 cycles per minute, Output with size 2.1: approx 5/6 cyclese per minute. Film width - up to 420mm wide. Maximum diameter of forming film reel - 400mm. Reel core diameter - 76mm. Thickness - 500 microns. Maximum diameter of top web film reel - 250mm. Reel core diameter - 76mm. Type of useable sealing film - plastic, aluminium, medical paper, Tyvec. Electric supply - 400 V / 50 hz / 3 phase. Compressed air supply -7 bar. Dwjdpfjwp Ac Hex Al Aoc Vacuum pump - Busch. Tooling external dimensions (internal) - Set 1 - 2x1 format: 197.5mm (177.5mm) x 300mm (280mm). Set 2 - 4x2 format: 98.75mm (78.75mm) x 150mm (130mm). Set 3 - 2x2 format: 190mm x 150mm x (122mm diameter). Set 4&5 - 2x2 format: 197.5mm (177.5mm) x 150mm (130mm). Previously used for packing various meat products. Last run in May 2025.

Condition: excellent (used), SLM Solutions SLM 500 HL Professional system for the additive manufacturing of metal components using selective laser melting. Suitable for industrial applications, prototype construction, toolmaking, aerospace, medical technology, and series production. Technical data Manufacturer: SLM Solutions Type: SLM 500 HL Year of manufacture: 2015 Build volume: 500 x 280 x 365 mm Laser configuration: Quad-fiber laser 4 x 400 W Max. build rate: up to 105 cm³/h Layer thickness: 20 µm to 75 µm Min. feature size: 150 µm Beam focus diameter: 80 - 115 µm Max. scanning speed: 10 m/s Supply voltage: 400 V / 50 Hz, 3/N/PE Control voltage: 24 V DC Rated current: 36 A Heating power: 2.4 kW Protection class: IP50 Compressed air requirement: 50 l/min at 6 bar Special features Patented multi-beam technology Automatic powder management PSX sieving station PRS unpacking station Laser class 1 CE marking available Service / Operating history The system was used exclusively for processing aluminum from the beginning and operated under a nitrogen atmosphere. It operated reliably until decommissioning. During the last maintenance, the oxygen sensors, including the evaluation unit, were updated to the latest version. The system was then professionally decommissioned. Cooling unit Manufacturer: Riedel Type: WKS 101.2M5LE.I Year of manufacture: 2016 Refrigerant: R134a Filling quantity: 3.0 kg Operating pressure HD: 18.7 bar Protection class: IP54 Scope of delivery according to delivery note SLM 500 HL laser melting system, approx. 2680 kg Riedel cooling unit WKS101.2M5LE.I, approx. 200 kg SLM filter system, approx. 150 kg SLM unpacking station PRS 500, approx. 855 kg SLM sieving system PSX 500, approx. 690 kg Logitrans lifter LFSM 1002/1620, year of manufacture 2015, approx. 550 kg 2 x SLM build cylinders, each approx. 205 kg SLM spare parts / piping Dimensions / Weight Complete system according to manufacturer's specifications: approx. 5200 x 2800 x 2700 mm Weight according to manufacturer's specifications: approx. 3100 kg in operating condition approx. 2400 kg without powder Condition Used system from industrial application. The system has been dismantled and stored. Optical condition as shown in the pictures. Scope of delivery as shown in the pictures. Inspection and testing on-site are possible by arrangement and are highly recommended. Important note: Dedjza Ethspfx Al Ajwc All information is provided to the best of our knowledge based on available documents, software displays, manufacturer data, delivery note and nameplates. Deviations in technical data are possible. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: FTR-124-1217, total length: 2,150 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 3,750 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, power: 25 kW (33.99 HP), workpiece width (max.): 80 mm, workpiece length (max.): 80 mm, input current: 50 A, This Q-Fin F1200 XL VAC machine is located in the showroom in Bergeijk and has only been used for demonstrations. The machine has therefore only been used for a limited time and can still be viewed and tested in our showroom while it is running. The F1200 XL VAC is a powerful, all-round finishing machine for deburring, rounding, and finishing sheet metal parts up to 1200 mm wide. Thanks to the combination of multiple processing stations, various operations can be performed in a single pass. The machine is equipped with a vacuum system that securely fixes the workpieces to the conveyor belt during the finishing process. The first processing station consists of a grinding unit. This removes burrs and irregularities from the product surface and prepares the workpiece for the next operations. Dwedpfx Alszzlqne Asc Subsequently, the sharp edges of the product are processed by oscillating cup brushes. The brushes process the contours and recesses of the workpiece from different directions, ensuring that the edges are rounded evenly. Depending on the brushes used, the machine can also be used for removing oxide scale and reducing surface roughness. The XL version has an additional second grinding unit. This allows an additional finishing operation to be performed after deburring and rounding. All processing stations can be easily controlled via the HMI touchscreen. Various settings can be saved in programs, so recurring products can be quickly reset, achieving high reproducibility. The automatically adjustable stations also reduce manual settings and minimize the risk of setting errors by the operator. The F1200 XL VAC is suitable for processing, among other materials, stainless steel, aluminum, and steel, and combines deburring, edge rounding, and finishing in one machine. In addition, the F1200 offers the possibility of integration with ERP and handling solutions, so that the machine can also be incorporated into a further automated production process.

Condition: like new (used), Year of construction: 2018, 4th Generation of The XXL system by Imaging Solutions 5-in-1 solution. A LayFlat book block producing from sheets in just one working step. One push of a button triggers all of the necessary individual steps: cutting, creasing, folding, pressing, and gluing. LayFlat book blocks are produced with minimum manpower requirements, and same-day finishing and shipping is possible. Specifications: 2300 sheets per hour XL format book blocks up to 370 mm x 457 mm (14.5” x 18”) High-level performance: up to 250 book blocks/h Dodon Ut D Nopfx Al Ajwc Barcode controlled product selection: Different page lengths and book configuration (inlays) within one roll possible thus reducing time for batching Optional inlay feeder with a stacking height of 220 mm (8.66”) Unlimited number of inlays can be glued between two pages Active adjustment of gluing head for precise and homogeneous glue application Optional in-line book press for perfect book spines Easy to operate via touchscreen 5-in-1 fully automatic print finishing system Cutting, creasing, folding, pressing and gluing in only one workstep Complete LayFlat book blocks manufactured from sheets Integratable into barcode-controlled workflows (e.g. inline with 3-knife-trimmer) Provides consistent premium quality with low production costs Premium LayFlat photo book technology for panoramic pages Processes original photo paper and digital press paper.

Condition: used, Kyocera TASKalfa 2553ci for Sale Several units are available from stock, all with less than 80,000 prints. Main features: - Colour multifunction printer: print, copy and scan - A3 / A4 - Up to 25 ppm A4 / 12 ppm A3 - Up to 1,200 × 1,200 dpi print resolution - 10.1" colour touchscreen - Automatic duplex printing - Paper weights up to 300 g/m² Kyocera Document Solutions Djdez Iznaepfx Al Aewc The machines are in good condition, fully tested and cleaned, and delivered ready for use. For any questions or further information, please feel free to contact me.

Year of construction: 2022, condition: ready for operation (used), Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection possible by arrangement. Dwjdpfsxy R Ezjx Al Aec

Condition: excellent (used), Year of construction: 2022, overall weight: 790 kg, chuck outer diameter: 1,000 mm, bolt circle diameter: 145 mm, total height: 140 mm, total width: 1,000 mm, total length: 1,000 mm, Metal cutting Tooling TDG Solutions - PGI 1000 MACH-ID 9418 Make: TDG Solutions Type: PGI 1000 Dwjdpfx Alezcnm As Ajc Year: 2022 Diameter: 1000mm 4 chuck: Yes Spindle bore:145mm Max. speed: 611Rpm Length: 1000mm Width: 1000mm Height: 140mm Weight: 790kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2016, condition: excellent (used), Type: ETS MPA409/M437A HP-3A For sale is a used vibration and shock testing system from the manufacturer ETS Solutions. Technical data: Vibration test system ETS MPA409/M437A Sine force approx. 39.2 kN Random force approx. 39.2 kN Shock force 6ms: approx. 78.4 kN Frequency range: DC-2,500 Hz Max. Displacement Continuous (deflection) 51 mm Max. Displacement at shock 51 mm Dedpfszu Nxisx Al Aewc Max. Vibration velocity (sine) 1.8 m/s Max. Acceleration (sine / random) 100/40 g Vibration exciter type M437A Diameter of vibration coil 370 mm Weight of vibration coil 34 kg Number of threaded inserts 16 stainless steel inserts Threaded inserts (standard) M10 Threaded inserts per bolt circle 8 at ∅ 150 mm Diameter of bolt circle 8 at ∅ 300 mm Resonant frequency of the armature without payload 2,250 (Hz ± 5%) Max. static payload weight 500 kg Axial frequency of the vibration isolation < 5 Hz Flux density < 1 mT Dimensions Length 1136 mm Width 860 mm Height 1118 mm Weight of vibration exciter 2470 kg Amplifier MPA409 - Output power approx. 40 kW - Amplifier efficiency > 90% - Dimensions approx. (L x W x H in mm): 550x800x1850 - Weight approx. 620 kg HP-3A cooling air blower - Power consumption approx. 7.5 kW - Dimensions approx. (L x W x H in mm): 945x693x1466 - Weight approx. 175 kg Vibration controller DTC VENZO 880 - 2 to 8 analog input channels - 1 to 2 control channels (suitable for two-axis control applications) - 450 MHz DSP processing, 100 Mbit/s Ethernet interface for PC connection (without grounding problems) - Operating temperature range: -30 to 70 °C - Fanless design to reduce background noise - Anti-aliasing filter with 160 dB/octave slope - 1 AUX channel - 24-bit ADC/DAC, 135 dB dynamic range - 204.8 kHz sampling rate, 80 kHz frequency range - 1 GB internal flash memory for storing test configurations - Design with ground-isolated ground to avoid ground loop problems Scope of delivery: (See picture) Condition: Used Signs of wear and tear due to age and use Dirt, paint chips and traces of corrosion are present Optical condition according to pictures Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Dwodpfx Aloz N Sfmj Aoc Discharge of scrap from under the machine directly to the container.

Condition: good (used), Conveyor belt for scraps from guillotine M-Fordersysteme Production Germany Year of manufacture 2015. Working width 46 cm, conveyor length approx. 250 cm. Discharge of trimmings from under the machine directly to the container. Dwedpfxsz N Sgqj Al Ajc Material pressing roller, upper cover preventing spillage of the excavated material.

Year of construction: 2023, condition: used, functionality: fully functional, THM Recycling Solutions Granulation System Plastics Shredder, Granulation and Washing System comprising Dedpfxjzhudwj Al Aswc THM Recycling Solutions granulation unit with: THM FR300/235/215-25-7500 inlet belt conveyor (2024) THM ZM 1000 granulator (2023) THM FR300/235/215-25-7500 outlet belt conveyor (2024) HAG HA-SNP-P-20-14-0-7.5 hydraulic unit,12 bar Pierret guillotine cutting system with: Pierret G35RI guillotine cutting machine Pierret G28RI guillotine cutting machine 2x belt conveyors for infeed and outlet

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Dodpfx Aez D Ihfsl Ajwc

Condition: used, Year of construction: 2023, functionality: fully functional, In this listing, you are purchasing a second-hand “Fuji Acuity Prime L” flatbed printer Item for sale: Dsdpfxjz Ay E Ne Al Aowc 1 x Fuji Acuity Prime L Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order. A test print can be seen in the photo. Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you before dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: limited functionality, Year of construction: 2013, operating hours: 5,400 h, Stratasys Objet Connex 500 industrial multi-material PolyJet 3D printer available for sale in the UK. The machine has approximately 5,400 operating hours and powers up successfully. When inspected, the machine was not displaying print-head errors. The printer has not recently completed a test print because the printing materials/resins currently installed have expired. We are therefore selling the machine transparently as requiring recommissioning and fresh materials before full production operation can be confirmed. The Connex 500 is an industrial PolyJet additive manufacturing system designed for professional prototyping and multi-material applications. Its large build platform and ability to work with different material characteristics made the Connex range particularly suited to engineering, product development and prototype production. The machine was removed from a commercial environment and is now surplus to requirements. Known condition: Powers up successfully Approximately 5,400 operating hours No print-head errors observed during inspection Existing resin/material is expired Full print cycle has not been tested with fresh material Offered in its present condition Inspection welcomed prior to purchase This could represent a good opportunity for an existing Stratasys/Objet user, specialist reseller or refurbishment company familiar with the Connex platform. The machine is located in the United Kingdom. Further photographs and a video showing the machine powered on can be supplied on request. Dedpfszy Rwqsx Al Ajwc

Condition: used, This listing is for the Sartorius MSA225S-1CE-D1 + Sartorius YDP10 Printer The unit is in full working condition and is ready for immediate use The Sartorius Sartorius MSA225S-1CE-D1 + Sartorius YDP10 Printer combination is a dependable laboratory balance and printer set designed for accurate and consistent weighing in research, education, and industrial environments. Built with precision engineering, it delivers reliable measurement performance for routine laboratory applications. Its robust construction ensures long-term durability, while the clear digital display allows for easy reading of results. The intuitive interface makes operation straightforward, reducing user error and improving workflow efficiency. Dwjdpeyyp Hyjfx Al Aec Ideal for general laboratory weighing tasks, the MSE1245 Solent Scale provides the accuracy and stability expected from Sartorius equipment, making it a practical and cost-effective solution for everyday use

Condition: excellent (used), Year of construction: 2018, operating hours: 3,000 h, The Agfa Jeti Tauro H2500 LED is a 2.54 m hybrid flatbed/roll-to-roll UV LED inkjet printer. Colour configuration: CMYK Lc Lm + White + primer (6c W4 P2). Under Premium care service contract. Perfect working conditions. Only 2.900 hours of print. Full automation - Double robot configuration The high-performance UV LED printer for demanding large-format production. 2.54 m print width Up to 275 m²/h UV LED technology Hybrid flatbed + roll-to-roll Up to 1,200 dpi CMYK + Light Cyan + Light Magenta Optional White & Primer Print on rigid and flexible media Designed for high-volume, industrial production One machine. Endless possibilities. From signage and displays to POS, retail graphics, décor and banners, the Jeti Tauro H2500 LED delivers high-quality results with exceptional productivity. Dwjdpoz D I R Tofx Al Asc For further technical specifications please refer to attached brochure.

Condition: good (used), 3D Systems ProJet MJP 2500 Plus MultiJet 3D Printer Description: Professional MultiJet 3D printer / MJP system 3D Systems ProJet MJP 2500 Plus MultiJet Printing with HD and UHD printing mode For sale is a used professional 3D printer from the manufacturer 3D Systems. The ProJet MJP 2500 Plus is suitable for the production of precise plastic components, functional prototypes, concept models, as well as jigs and tool applications. Technical data: Manufacturer: 3D Systems Model: ProJet MJP 2500 Plus Technology: MultiJet Printing (MJP) Printing modes: HD / UHD Max. build volume: 294 × 211 × 144 mm HD mode: 800 × 900 × 790 DPI Layer thickness: 32 µm UHD mode: 1600 × 900 × 790 DPI Layer thickness: 32 µm Dimensions: 1120 × 740 × 1070 mm (W × D × H) Weight: 211 kg Power supply: 200–240 V / 50 Hz / 1-phase / 10 A Internal hard drive: at least 500 GB Operating temperature: 18–28 °C Interfaces: Ethernet USB Features: Integrated touch display Material system for build and support material Automatic material bottle switching Network connection USB port 3D Sprint software support Material containers as shown in the pictures Applications: Functional prototypes Concept models Form and fit testing Jigs and fixtures Tool applications Product development Additive manufacturing Scope of delivery: 1 × 3D Systems ProJet MJP 2500 Plus Dsdpfxsz Erdae Al Aewc Material containers as shown in the pictures Other accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Shipping by freight forwarder possible. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: MTU 12V4000 L33, type of input current: three-phase, total height: 5 mm, total length: 25 mm, total width: 3 mm, type of cooling: water, Equipment: documentation/manual, rotational speed infinitely variable, Plant assembled and NEVER put into operation Cogeneration Unit MTU 12V4000 L33 GAS GENERATOR SET Condition: New – 0 hours Enclosure: Enclosed container Rated electrical power: 1,262 kW Thermal power: 1,355 kW Electrical efficiency (cos φ = 1.0): 42.1% Thermal efficiency: 45.2% Total efficiency (full heat recovery): 87.3% Fuel consumption: • At 100% load: 299 Nm³/h • At 75% load: 232 Nm³/h Djdpfx Ajydqlqel Aowc • At 50% load: 167 Nm³/h Manufacturer: MTU – Centrica Business Solutions Srl Equipment designation: Type: E1265 250 Nox L33 Natural Gas CHP Unit Configuration: Containerized Rated current: 1,935 KVA Engine: Genset Rolls Royce MTU 12V4000L33 Number of cylinders: V12 Max engine power: 1,320 kW Generator: Stamford Model: PE734E-312 Type: Three-phase, synchronous, four-pole, brushless Rated voltage: 400 V Frequency: 50 Hz Dimensions (L x W x H): 12,800 / 2,700 / 2,900 mm Absorption Unit CARRIER 16LJ-F41 Condition: New – 0 hours Enclosure: Enclosed container Capacity: 1,178 kW Cooling System Flow rate: 56.4 L/sec Pressure: 45 kPa Connection (DIN): 8” (inch) Volume: 0.48 m³ Heat Rejection System Flow rate: 93.1 L/sec Pressure: 117 kPa Connection (DIN): 10” (inch) Volume: 1.39 m³ Dimensions (L x H x W): 5,330 x 3,080 x 1,690 mm Weight: 13,700 kg Evaporative Cooling Towers: No. 2 Condition: New – 0 hours

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 33234, Year of construction: 2013, Stratasys Objet 260 Connex – Professional 3D Printer For sale: Stratasys Objet 260 Connex 3D printer, year of manufacture 2013. The machine comes from a professional environment and is suitable for applications such as prototyping and product development. Optional accessories are negotiable. Further information available upon request. Dodpfx Aljyag Ime Ajwc