Used Avs Generator for sale (9,628)

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller Bodpfx Asxfrv Eok Eelg CNC Top Ten bv Coevorden, Netherlands

Condition: new, Year of construction: 2023, operating hours: 1 h, functionality: fully functional, overall weight: 5,200 kg, fuel type: diesel, color: beige, power: 513 kW (697.49 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 408 kW (554.72 HP), nominal power (apparent): 510 kVA, continuous power: 368 kW (500.34 HP), total length: 4,460 mm, total width: 1,606 mm, total height: 2,493 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Doosan, type of cooling: water, AVS diesel generator set - stationary Type: DW 460 DO2 15 AK14A PRP output: 368 kW / 460 kVA ESP output: 408 kW / 510 kVA Operating hours: 1 Engine: DOOSAN DP158LC Bledjua Tl Aopfx Ak Eeg Power standby: 513 kW Speed: 1,500 rpm Operating voltage: 24 V Cooling: water-cooled Generator: Mecc Alte ECO 40-3S/4 B Voltage: 400/231 V Voltage regulator: DER-1/A Control panel: DSE 7320 - automatic emergency power supply Dimensions: 4460 x 1606 x 2493 mm (LxWxH) Weight: 5200 kg Equipment: Battery charger 5 Amper, battery disconnect switch

Condition: ready for operation (used), Boiler plant for production of steam. Capacity : up to 12 MW Production capacity 16 ton per hour at 20 bar steam. Working pressure : From 5 bar to 20 bar Steam temp 215 degrees C Designed for solid fuel like, wood chips, sawdust, bark Blodpfx Aey Av Rdsk Eeg

Year of construction: 2025, condition: new, functionality: fully functional, Complete - New MWM and CAT GAS generator set, CHP as option, Generator 10500V/50Hz. Blodpfsv Uag Isx Ak Esg

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Bsdpfxjyl Nnto Ak Eslg

Condition: repair required (used), Year of construction: 2011, operating hours: 104 h, functionality: limited functionality, machine/vehicle number: KN 10 39 17, type of cooling: water, rotational speed (max.): 1,500 rpm, tank capacity: 700 l, nominal power: 128 kW (174.03 HP), nominal power (apparent): 130 kVA, fuel type: diesel, output voltage: 400 V, output current: 188 A, output frequency: 50 Hz, motor manufacturer: Deutz, For sale is an AVS Aggregatebau GmbH diesel generator with the following key specifications: Manufacturer: AVS Aggregatebau GmbH Type: DW 130 De 15 M 12 Unit No.: KN 10 39 17 Year of construction: 2011 Technical Data – Complete Generator: Power output: 130 kVA Voltage: 400V 50 Hz Speed: 1500 rpm Fuel tank: 700 L capacity Consumption: Up to 209 g/kWh, depending on load Operating hours: 104.8 h Detailed Components: Diesel engine Deutz BF6M 1013 E Engine No.: 11021228 Power output: 128 kW Speed: 1500 rpm Water-cooled Generator Mecc alte ECP 34-1L/4 Generator No.: 0001444400 Power output: 130 kVA Cos-Phi: 0.8 Voltage: 400 V Current: 188 A Frequency: 50 Hz The generator set has the following maintenance backlog: - Replace V-belt - Replace battery - Change coolant Bsdpfevtpv Nex Ak Ejlg If dismantling and pickup are carried out by the buyer, the selling price is €18,500. If dismantling is performed by Blue Energy Group AG, additional fees will apply. The components included in the purchase price can be identified in the images.

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Bledpfx Aox U Tgmok Eog Year of manufacture: 2023 The unit looks as good as new. The system was only in operation for a short period.

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Bjdpfx Aew U N Daok Eelg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: DK32037U640362L, overall weight: 975 kg, fuel type: diesel, tank capacity: 120 l, rotational speed (max.): 1,500 rpm, New ETT-50P generator from year 2026! TECHNICAL DETAILS Speed (max.): 1,500 rpm Power factor: 0.8 MACHINE DETAILS Output current: 72 A Output voltage: 400 V Output frequency: 50 Hz Type of output current: three-phase Continuous power (apparent): 50 kVA Emergency current: 72 A Voltage: 400/230 V Phases: 3 Fuel type: Diesel Bledpfjy Emwyox Ak Eog Tank capacity: 120 l Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,060 x 1,373 mm Total weight: 975 kg EQUIPMENT CE marking Suitable with ATS switching system for mains takeover

Condition: new, functionality: fully functional, power: 2,028 kW (2,757.31 HP), output voltage: 11,000 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, 7 pcs in stock =Scope of supply= Genset mtu 16V4000L64FNER, 11 kV for operation with Natural Gas. gas train of 116-250 mbar inlet pressure with 1m flexible rubber-metal connecting hose. set of sylomer stripes for genset foundation installation. set of flexible connection for engine coolant circuit with flange connection Bsdpoy Hddtjfx Ak Eelg set of flexible connection for mixture coolant circuit with flange connection set of exhaust bellows with flange connection and companion flange set Maintenance-free starter batteries, mounted on base frame. MIP (MTU Interface Panel) incl. Black Start option and ECU Remote Control interface =Technical specifications= Time for delivery - in stock Engine type - mtu 16V4000L64FNER Electrical power - 2028 kW Engine speed - 1500 rpm Electrical efficiency - 43.9 % Total efficiency - 88.6 % Alternator type - Leroy Somer LSA 54.2 ZL14 Voltage - 11 kV Frequency - 50 HZ < 500mg NOx at 5% O2 =Other information= Production country - Germany

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Bsdsxlngaepfx Ak Ejlg Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 275 mm Bljdpfjv N Hiljx Ak Eeg gear width: 55 mm max. module: 6,5 min. module: 1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be “prepared” for the individual part procedure. I.e. direct measuring system + part gear brake, workpiece axis + license file for the production of individual parts. *

Condition: excellent (used), Used ultrasonic generators with few operating hours Matching sonotrodes, cables, boosters, and generators available in stock and can be purchased additionally Several ultrasonic generators available Different manufacturers and brands Brand: Herrmann Blsdpfswiw Ahox Ak Esg Brand: Weber Brand: SONIC Brand: COMPProve Display: Digital display with LED indicator for output power (%) Output power: Continuously adjustable from 0–100% Control: On/off switch on the front panel Status indicators: Multi-colored LED indicators for operating states Housing: Robust industrial design made of metal

Condition: good (used), Year of construction: 1978, max. pitch circle 152 mm Bodexq Hgcspfx Ak Eolg Number of teeth 8-50 St. weight 7500 kg Technical data – Min./max. foot cone angle: 15° / 55° – Pitch circle diameter: 152 mm – Max. tooth height with 21° finished broach head: 10.7 mm – Max. tooth width at tooth root with 21°: 28 mm – Broach head diameter: 200 mm – Number of teeth range: 8–50 – Max. broach head diameter: .21" Workpiece spindle – Diameter of the tapered bore at the wide end: 99.219 mm – Clamping length at 304.8 mm: 15.478 mm – Taper depth: 15.875 mm – Diameter of the entire spindle bore: 22.225 mm Maximum tooth height: 14.8 mm Maximum tooth width at the root: 28 mm Maximum root angle: 55° Minimum root angle: 15° Milling head speed: 32.6-49.7 m/min Feed speeds (seconds per tooth): 2-3.1 Index range: 8-50 mm Diameter of taper bore at large end: 99 mm Taper per foot: 15.4 mm Depth of taper: 15.8 mm Countersink behind the taper: 57.2 x 77.9 mm Diameter of the bore through the spindle: 22.3 mm Power of the main drive motor: 10 HP Rotation of the main drive motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the hydraulic motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the coolant pump (60 Hz/50 Hz): 3600/3000 rpm Rotation of the chip screw motor (60 Hz/50 Hz): 1800/1500 rpm Footprint (L x W): 320 x 221 cm Total weight of the 726 REVACYCLE machine: approx. 9 t

Condition: used, Year of construction: 1998, workpiece diameter with ratio 1:10 300 mm workpiece diameter with ratio 1:1 212 mm max. number of teeth 200 min. number of teeth 6 x-travel 300 mm X - Axis speed 0,1-5.000 mm/sec. y-travel 400 mm Y - Axis speed 0,1-5.000 mm/sec. Bsdpfxjul El To Ak Eelg A - axis -170 / +170 ° control Siemens Sinumerik 840 C total power requirement 38 kW weight of the machine ca. 10 t dimensions of the machine ca. 4,20 x 2,20 x 2,10 m incl. suction

Year of construction: 2006, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator -Discount: You get a 20% discount on this item -Soundproofed: 91 dB -Power: 7.0 kVA 50 Hz -Petrol engine: Honda -2x: Schuko 230 Volt -1x: 380 Volt power outlet -1x: Charging cable, 12-volt socket -Dimensions of unit: 590/780/H750 mm Bjdpfecgan Aex Ak Eelg -Weight: 136 kg

Condition: used, This GRETTECH generator JLP6500GT 5.0 kW / 5.5 kW is being auctioned online in our industrial auction / machinery auction for range clearance – warehouse sale – individual/exhibition pieces. Bjdpfjy Hrc Djx Ak Eelg

Condition: used, This petrol power generator 3.5 kW is being auctioned online in our industrial/machinery auction (range clearance – warehouse sale – single/display units). Bodpoy Hrbmefx Ak Eelg

Condition: used, This energy generator is being auctioned in our online industrial auction / machinery auction for warehouse clearance of Fidel Schub GmbH & Co. KG. Bjdpfx Aksy Hq Sko Ejlg You can find this and many other items on our platform.

Condition: used, This GEKO generator set, year 2020, is being auctioned online in our industrial/machinery auction as part of a warehouse clearance by Fidel Schub GmbH & Co. KG. Bsdpfjy Hq R Tsx Ak Eolg

Condition: new, Year of construction: 2025, Firebox output: 510 kW Operating output: 407 kW New device, original packaging: Yes Flue diameter: 250 mm Hot air distribution ducts: 4 x 350 mm Firebox length: 1900 mm Firebox width: 900 mm Firebox height: 900 mm Airflow rate: 26,000 m³/h Power consumption: 4,500 W Designed for room volume: 8,000 m³ Heated area: 1,800 m² Bjdpfxjk Utrwj Ak Eelg Oven height without hot air ducts: 3,000 mm Oven width: 1,220 mm Oven length without flue gas fan: 2,700 mm Weight: 1,575 kg

Condition: new, Year of construction: 2025, Firebox output: 350 kW Working output: 279 kW Flue diameter: 200 mm Warm air supply ducts: 3 x 300 mm Firebox length: 1200 mm Firebox width: 740 mm Firebox height: 1040 mm Air delivery: 17,800 m³/h Power consumption of warm air blower: 3 kW Power consumption of flue gas fan: 600 W Designed for room volume: 5,000 m³ Heatable area: 1,000 m² Oven height without warm air supply ducts: 2,500 mm Oven width: 1,100 mm Bledpfxek Utrte Ak Esg Oven length without flue gas fan: 1,900 mm Weight: 850 kg

Condition: new, Year of construction: 2024, Furnace output: 175 kW Effective output: 140 kW Flue outlet diameter: 200 mm Warm air distribution ducts: 3 x 250 mm Combustion chamber length: 950 mm Combustion chamber width: 600 mm Combustion chamber height: 860 mm Airflow rate: 8,900 m³/h Power consumption: 3,500 W Designed for room volume: 3,000 m³ Heatable area: 500/600 m² Bljdek Utrpopfx Ak Ejg Oven height without warm air ducts: 2,200 mm Oven width: 930 mm Oven length without flue gas fan: 1,700 mm Weight: 615 kg

Condition: new, Year of construction: 2025, Firebox output: 125 kW Working output: 99 kW Flue outlet diameter: 180 mm Warm air supply ducts: 2 x 250 mm Firebox length: 750 mm Firebox width: 560 mm Firebox height: 700 mm Airflow: 6,300 m³/h Power consumption: 1,500 W Designed for room volume: 1,500 m³ Heating area: 300/350 m² Oven height without warm air ducts: 1,980 mm Oven width: 800 mm Bledjk Utrhjpfx Ak Ejg Oven length without flue gas fan: 1,280 mm Weight: 415 kg

Condition: new, Year of construction: 2025, Furnace Output: 34 kW Working Output: 29 kW New Device: yes, original packaging Warm air blower, flue gas blower, control unit with digital display: included Warm air delivery pipes: 2 x 180 mm with freely rotatable, plug-in 90° bends Flue outlet diameter: 160 mm Furnace length: 500 mm Furnace width: 400 mm Furnace height: 590 mm Bjdpfx Ask Utrask Eolg Air delivery: 2,200 m³/h Power consumption: 400 W Designed for room volume: 500 m³ Heatable area: 100/150 m² Stove height without warm air delivery pipes: 1,560 mm Stove width: 550 mm Stove length without flue gas blower: 920 mm Weight: 190 kg