Used Atec Alginator for sale (431)

Year of construction: 2009, condition: used, machine/vehicle number: C10030 - 02, 2009, Bodpsdtt Ddjfx Amyolk 70Kg, digital timers and temperatures, high shear mixer, electrically heated, on stainless mobile skid

Condition: refurbished (used), functionality: fully functional, battery capacity: 620 Ah, remaining battery capacity: 71 %, battery voltage: 80 V, total length: 1,028 mm, total width: 708 mm, total height: 785 mm, overall weight: 1,570 kg, fuel type: electric, type of output current: DC, battery manufacturer: Hawker, Forklift battery 80V 4PzS620, 71% CAPACITY REMAINING, TESTED Year of manufacture: unknown Dimensions (l x w x h): 1028mm x 708mm x 785mm Weight: 1570 kg Battery has been serviced and tested by a specialist company. Bljdpfx Amozl A Irsyok Capacity test (C5 discharge test): 442/620 Ah battery Remaining capacity: 71% Equipped with an Aquamatik filling system (BFS) Includes terminal bolts but WITHOUT terminal connector.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: MST-0800C0028, For sale: automatic plastic injection molding machine ATEC HQ-800QL. Year of manufacture – 2005 (04), Serial No. MST-0800C0028. Hydraulic system with digital control panel, suitable for serial production of plastic parts. Power supply 380 V, 50 Hz, 3 phases. Used, fully equipped, previously operated in production. Suitable for manufacturing technical, packaging, and industrial plastic components. Inspection on site possible. Bsdjx Nhy Repfx Amyjlk

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 21,000 rpm, working length: 3,750 mm, TECHNICAL DETAILS Machining length with bar support: 3,750 mm Machining length without bar support: 3,500 mm Travel range X-axis: 3,500 mm Travel range Y-axis: 280 mm Travel range Z-axis: 300 mm Positioning speed: 30 m/min Positioning accuracy: ±0.1 mm Spindle power: 6 kW Spindle speed: 21,000 rpm Spindle interface: HSK F63 Tool positions: 5 Max. tool diameter (manual): 200 mm Max. tool diameter (automatic): 92 mm Max. saw blade diameter: 500 mm Blsdpfx Amoznczksyok MACHINE DETAILS Air consumption: approx. 50 l/cycle Compressed air requirement: > 7 bar Power supply: 400 V, 3-phase Note: The machine's operating hour counter is defective and cannot be read. The machine was only used in a single-shift operation.

Year of construction: 2009, condition: used, 3-axis machining center for aluminum or PVC profiles for top-side processing Max. Travel distance X-axis: 2,450 mm Max. travel Y-axis: 350 mm Bedpfezrhd Ejx Amyolk Max. travel Z-axis: 280 mm Windows control with 2 USB connections Speed up to 18,000 rpm. Minimal quantity spray device 4 pneumatic material clamps Light barrier

Year of construction: 2013, condition: used, Max. sawing length: 6,000 mm Max. saw blade diameter: 550 mm Windows-based control E 555 with touch display Swivel inside and outside 22.5° - 90° - 140° Tilt angles between 45 and 90 degrees Digital angle displays Moving roller conveyor Chip suction on both units Minimum quantity spray device label printers Machine is loaded free Bledpozqbp Eofx Amysk

Condition: excellent (used), Year of construction: 2011, operating hours: 2,450 h, travel distance X-axis: 6,000 mm, travel distance Y-axis: 12,001,400 mm, travel distance Z-axis: 18,001,790 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 3,000 kg, total height: 4,700 mm, total length: 12,700 mm, total width: 7,800 mm, rotary table diameter: 2,200 mm, rotational speed (max.): 200 rpm, overall weight: 57,000 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,450 h, coolant supply: 40 bar, number of slots in tool magazine: 60, tool length: 460 mm, Equipment: chip conveyor, documentation/manual, CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 6000 Y-axis travel mm: 1200/1400 Z-axis travel mm: 1800 (H) / 1790 (V) C-axis degrees: 360º (0,001) A-axis degrees: ±180° B-axis degrees: ±180° Rapid traverse m/min: 30 Worktable Table dimensions mm: 6000x1235 Milling/turning table nc: Table dimensions mm: Ø2200 Max. workpiece weight kg: 3000 Table rotation speed rpm: 200 max. torque Nm: 4600 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 33/24 (40%ED/cont) Spindle torque Nm: 382/278 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 With free neighboring places mm: 200 With occupied neighboring places mm: 104 Max. Tool Length mm: 460 Max tool weight kg: 25 Chip-to-chip time s: 9.8 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Workarea light DXF import function Paper band filter Automatic door Indexing Head Set Up for Shaft Machining Axles can be hydraulically locked using the M function Machine running times Under power: 29447 Spindle Working: 2450 Bjdpozb H Tfofx Amyelk Basic machine dimensions / weight Length mm: 12700 Width mm: 7800 Height mm: 4700 Weight kg: 57000

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 124169101-03-EN-EP124, It was used for pressing corners. Blodpfxjzrhudo Amyok

Condition: ready for operation (used), functionality: fully functional, It was used for pressing corners. Blsdpfszrht Hex Amyjk

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 124169101-03-EN-EP124, Equipment: 3rd hydraulic function, It was used for pressing corners. Bjdpfx Aezrhr Njmyslk

Year of construction: 2012, condition: like new (used), functionality: fully functional, machine/vehicle number: 1012331637, Precision Vee-cuts in aluminium and PVC profiles Pneumatic continuously adjustable saw blade feed for fast and precise sawing with rapid return Simple setting of cutting depth Equipped with connection for swarf extraction hose and swarf container as standard Equipped with pulsed coolant system Cutting range for Vee-cuts: cutting depth 60 mm, profile height 100 mm Saw blade diameter 254 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.9 kW Compressed air supply 7 bar Air consumption per working cycle 20 l without spraying, 44 l with spraying Bodezrcfqspfx Amyslk Length 980 mm, depth 800 mm, height 1,650 mm, weight 240 kg

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 20303, cutting length (max.): 4,500 mm, saw blade diameter: 500 mm, pressure: 7 bar, Tilting range pneumatically from 90° to 45° Bedpfoy Ah Hkox Amyelk Saw blade diameter 500 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 4 kW Compressed air supply 7 bar Air consumption per working cycle 20 l without spraying, 32 l with spraying Ideal machine for high-volume series production when cutting at 90° and 45° Vertical pneumatic material clamping unit Machine is prepared for operation We can offer professional assembly

Condition: ready for operation (used), Year of construction: 1986, Immediately available from a workshop for people with disabilities: L & Z lathe, Imatec Type ID 175 Year of manufacture 1986 Center height 175 mm Diameter over bed 350 mm Diameter over cross slide 210 mm Distance between centers 1000 mm Spindle bore 41 mm Bjdpszrbx Aefx Amyelk Spindle speeds 35.5 – 1600 rpm Digital display Chuck Faceplate Multifix system with holders Coolant system Drive power 3 kW Weight 1700 kg Price: Euro 2,250.00 plus VAT, ex works.

Condition: excellent (used), Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 80,000 m/min, rapid traverse Z-axis: 48,000 m/min, table width: 835 mm, table length: 3,500 mm, table load: 3,500 kg, 1 Axis CNC Swivel head, infinitely variable Axis drive with ball screw drive Roller linear guides in all axes Direct path measuring systems Full work area encosure with roof Chip conveyor Coolant unit Bsdpewyv Nzofx Amyslk X - Travel: 3000mm Y - Travel: 825mm Z - Travel: 1100mm B - Axis: - 3 to + 105° Table Length: 3500mm Table Width: 835mm Table load: 3500 Feed rate X-Axis: 48000mm/min. Feed rate Y-Axis: 80000mm/min. Feed rate Z-Axis: 48000mm/min. Spindle Taper: HSK 100ISO/Bt/Mk Power on spindle: 37kW Speeds / ranges: 8000Rpm ATC / revolver: 40 Coolant through spindle / Bar:25 Number of controlled axis: 4 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3800mm Height: 3800mm

Condition: good (used), Precise work is achieved through sawing from below. A large swivel range of up to 45° to the left and up to 0° to the right is provided. The special swivel mechanism with an integrated rotary table allows work to be performed from the front at all angle settings. A workpiece stop that can be shifted towards the rear enables optimal use of the saw blade capacity when processing wide and flat profiles. Manual saw feed. Comes standard with a saw blade and base frame. Pneumatic material clamping device (vertical). Metering spray device. Maintenance unit. Blsdpjzdi Nmjfx Amyjk

Condition: good (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, controller manufacturer: Heidenhain, overall weight: 12,000 kg, coolant supply: 20 bar, number of slots in tool magazine: 36, Equipment: chip conveyor, documentation/manual, Manufacturer: MATEC Model: 30 HV Year of manufacture: 2005 Control system: Heidenhain iTNC 530 Technical data Travel in X: 3,000 mm Travel in Y: 800 mm Travel in Z: 800 mm Universal machining center with 4-axis swiveling head Preparation for 5-axis machining with CNC rotary table Spindle speed: 20–9,000 rpm Tool holder: SK40 Tool magazine with 36 positions Spindle power: 30 kW Internal coolant supply at 20 bar Coolant tank with 450 liters and paper band filter Portable electronic handwheel Ethernet interface Chip conveyor Bedpjzq T Efjfx Amyslk Central lubrication Full enclosure with roof Preparation for wireless Renishaw 3D probe Partition for dual-station system Condition Tool changer completely overhauled Machine in good, well-maintained condition Ready for demonstration under power and immediately operational

Year of construction: 1996, condition: used, Max. cutting length: 6,000 mm Max. saw blade diameter: 380 mm Automatic positioning of the saw head via E 255 control Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Blodpfx Amsznyyqoyjk Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides 2-Hand-Bedienung Machine is partially disassembled on squared timbers (about 3000 mm assembled)

Condition: excellent (used), Year of construction: 2010, Maximum drilling diameter: 20 - 252 mm Bledpfxjznvrpj Amyok Drilling diameter in concrete: 20 - 202 mm Number of speeds: 3 Electrical connection: 220 V, 2300 W Weight: 7.4 kg

Condition: used, The Heraeus Sepatech 3743 centrifuge rotor is engineered for efficient and precise sample separation. Built for durability and balance at high speeds, it supports consistent laboratory workflows and is ideal for research, clinical, and industrial centrifugation applications Bljdpfx Aeyx S T Hsmyjk

Year of construction: 2012, condition: used, Elumatec AF 222 End Milling Machine, the Machine Transoms & Door Profiles in Aluminium or Plastic, Cutting Range up to 400mm, Tool Diameter up to 280mm. S/No. 2220025315 (2012). Country of Origin: Germany Blodpfx Aezqdw Ejmyek Location: These lots are located in Burton-on-Trent, UK. Please see individual lot for loading information and charges.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 5,000 mm, feed length X-axis: 500 mm, type of input current: three-phase, rotational speed (max.): 2,800 rpm, compressed air connection: 7 bar, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw blade diameter: 500 mm Rotational speed: 2,800 rpm Feed length per cycle: 5,600 mm Cutting angle: 90° Miter function depending on machine configuration MACHINE DETAILS Suitable materials: Aluminum profiles, thin-walled light metal profiles, window and door profiles Bedpfx Ajzqbltemyolk Power supply: 230/400 V, 3~ Frequency: 50 Hz Compressed air connection: 7 bar EQUIPMENT Chip extraction

Condition: good (used), Year of construction: 1997, functionality: unexamined, Equipment: CE marking, Used LIGMATECH carcass press - Model MPH 10 (GAZELLE) Blsdozp Sbispfx Amyok - immediately available - Year of manufacture 1997

Condition: good (used), Year of construction: 2002, Z - conveyor fimatech 700x1300x500 290 mm breit, year 2002 Bsdpjrlm A Sjfx Amyslk price: 2.450 € contact: Mr. Rainer Eckerle

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 400-223, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 200 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, mount diameter: 40 mm, table length: 2,500 mm, table width: 1,250 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 30,000 rpm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, tool diameter: 20 mm, number of slots in tool magazine: 30, We offer this used MB-Portatec GmbH basic IIS Portatec basic II.S portal milling machine, manufactured in 2011. Manufacturer: MB - PORTATEC GmbH Type: basic II.S Serial number: 400-223 Year of manufacture: 2011 -Application: Processing of aluminum and plastics from sheets up to 2500mm. -Optional extra: Vertical clamping system. -Accessories: Vacuum pump and extraction system with pre-separator. -MMS system -Programmable vacuum fields Bedpfx Aey U R Syjmyjlk If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2020, functionality: fully functional, BOSCH Pharmatec CIP System 8X0400 – Never Used – GMP Pharma Version For sale is a complete BOSCH Pharmatec CIP (Cleaning in Place) system in new condition (Never Used). The system was manufactured in 2019/2020 but was never put into operation. Since delivery, it has been stored professionally and is in excellent condition. The system was developed according to the highest GMP standards and is ideally suited for the pharmaceutical, biotechnology, vaccine, and food industries. Technical Data Manufacturer: Bosch Pharmatec GmbH (now Syntegon) Type: CIP Unit 8X0400 Year of Construction: 2019 / 2020 Condition: Never Used / New GMP Version Stainless Steel Design CE Marking Immediately available Bodpfx Aszpy Nzjmyolk Scope of Supply BOSCH Pharmatec CIP Unit 8X0400 Stainless Steel Water Tanks CIP Satellites Complete Pump Skids KPA Hygienic Pumps Endress+Hauser Measuring and Control Technology Hygienic Stainless Steel Piping Valves and Fittings Heat Exchangers Original Bosch Documentation P&ID Flow Diagrams Layout Drawings and Technical Documents Important Note The system is offered without pneumatic components and without control (automation). This allows the system to be individually adapted to the buyer's requirements and equipped with a modern PLC, pneumatic, and automation solution as desired. This offers maximum flexibility for new installations or integration into existing production facilities. Application Areas Pharmaceutical Industry Biotechnology Vaccine Production Sterile Production Facilities API Manufacturing Supply of Purified Media GMP Production Plants Contract Manufacturing (CMO) Advantages Original Bosch Pharmatec Quality Never Put Into Operation High-Quality GMP Version Complete Technical Documentation Available Flexible Retrofitting of Control and Pneumatic Technology According to Customer Requirements Immediately Available Significantly Cheaper Than a Comparable New System The system can be inspected by appointment. We will gladly send you further photos, technical documents and drawings upon request.