Used Asdorf Tlb 130 for sale (4,449)

Year of construction: 1987, condition: used, bore diameter 620 mm spindle diameter 130 mm bore depth 320 mm feed stepless 0 - 12 mm/min turning speeds 10 - 70 U/min voltage 380 V / 50 Hz total power requirement 4 kW weight of the machine ca. 1,6 t dimensions of the machine ca. 2,0 x 1,2 x 1,3 m Hjdst I D Swspfx Af Sju transportable drilling out work, completely ready for connection gear of drill spindle runs over LENZE planetary drive advanced feed with LENZE direct current motor, output: 160 watt clockwise and counterclockwise with tool holder for Ø 420 x 620 mm, tool holder for tooling equipment fabri. LENZ LPAS 3, diverse turning steel

Condition: refurbished (used), functionality: fully functional, Equipment: documentation/manual, Hello, we are offering a Thieme TSC 130 squeegee cutting machine that has been completely overhauled in our workshop. Hedpfozyc T Rox Af Sju It is suitable for a maximum squeegee length of 1300 mm. In this system, the squeegee blade is trimmed thinly using a very fast-rotating special knife under a water/alcohol mixture. This is necessary if the squeegee blade has not been installed perfectly flat or if the edge of the squeegee blade is damaged and no longer prints cleanly. The advantage of cutting compared to squeegee grinding is: the rubber does not get hot and melt. You always get the same, defined edge, and virtually anyone can do it. The system is suitable for classic screen printing squeegee blades. It is not suitable for RKS squeegee blades or carbon squeegees. The system is currently located in our warehouse/workshop in 93476 Blaibach. We would be happy to take care of transport, etc. If you have any questions, please do not hesitate to contact us.

Year of construction: 1987, condition: used, bore diameter 550 mm Spindle diameter 100 mm Hodpotv Ihwjfx Af Ssu bore depth 320 mm turning speeds 10 70 U/min feed stepless 0 - 12 mm/min voltage 380 V / 50 Hz total power requirement 3 kW weight of the machine ca. 1.35 t dimensions of the machine ca. 1,0 x 2,5 x 1,0 m Transportable boring mill, completely ready for connection, Drilling spindle drive via LENZE planetary gear, feed drive with LENZE DC motor, power 100 watts, left and right rotation, with tool holder for Ø 420 and Ø 550 mm, tool holder for facing tool, make LENZ LPAS 3, various turning steels,

Year of construction: 2018, condition: used, Clamping force: 900kN, screw diameter: 30mm, L/D ratio: 22, specific injection pressure: 1540bar, calculated shot volume: 88.4cm³, max. shot weight (PS): 80.4g, tie-bar spacing (H×V): 470mm/420mm, min. mold height: 225mm, max. platen distance: 700mm, opening stroke: 475mm, ejector stroke: 150mm, ejector force: 41.2kN, control system: UNILOG B8, weight: 4200kg. Documentation available. An on-site inspection is possible. Hsdpfx Ajz Hn Spof Ssu

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G5-M030-13-2V-R10-15, total length: 7,200 mm, total height: 2,700 mm, input voltage: 400 V, total width: 2,700 mm, Technical Specifications Brand: Schraml Model: TopDRILL M-RX 130 Roto-10 Year: 2015 Direction of rotation: Right to left Condition: As is (Very good condition) Parameter Specification / Capacity - Machining height / Max. 1300 mm - Maximum glass height / Unlimited (Open-top model / open-top design) - Maximum glass length / 3200 mm - Glass size for drilling min. 600 x 210 mm - Glass size for milling min. 750 x 210 mm - Maximum glass weight 150 kg - Glass thickness for drilling 4 - 40 mm - Glass thickness for milling 4 - 20 mm - Tool magazine (Roto) Automatic double revolver magazine 10 + 10 (front and rear), total 20 positions - Tool diameter Up to max. 80 mm - Tool connection 1/2" gas thread with length 75 mm - Spindle speed 0 - 12,000 rpm - Spindle cooling Water-cooled - Control & Software Schraml software with Siemens electrical components - Included accessories Automatic sharpening device for tools Hodpfxsz A D H Uo Af Ssu - Separate vacuum pump for glass fixing - Additional conveyor (1 meter) - Machine dimensions L 7200 mm x W 2700 mm x H 2700 mm - Machine weight 3800 kg - Electrical connection 3x400V + N + PE, 50/60Hz, total power: 25 kW Dismantling, loading and installation can be carried out on request by our service team.

Condition: used, Year of construction: 2022, machine/vehicle number: 13180, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Technical data: Hjdpfx Afez Aa E Nj Ssu - Year of construction: 2022 - Serial number: 13180 - Bending force: 40 t - Working length: 1300 mm - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2021, machine/vehicle number: 12986, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Technical data: - Year of construction: 2021 - Serial number: 12986 - Bending force: 40 t - Working length: 1300 mm - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Hodpfx Afsz Aa Ecs Ssu Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2021, machine/vehicle number: 13900, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Technical data: Hsdpfx Afjz Aa Eio Sju - Year of construction: 2021 - Serial number: 13900 - Bending force: 40 t - Working length: 1300 mm - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: ready for operation (used), functionality: fully functional, Meat grinder LASKA W 130 . Hodpfx Afez E Daae Ssu

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Hodpfx Aoz Ebznef Sou Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, spindle speed (max.): 1,660 rpm, spindle speed (min.): 45 rpm, total height: 1,700 mm, total width: 1,550 mm, total length: 1,760 mm, table width: 300 mm, table length: 1,270 mm, type of input current: three-phase, overall weight: 1,450 kg, input voltage: 400 V, workpiece weight (max.): 1,450 kg, distance table to spindle center: 646 mm, Equipment: documentation/manual, Heavy-duty universal drilling and milling machine with digital position measurement, DPA 31 Plus. Hodpezy D Ezofx Af Sou

Condition: used, Year of construction: 2023, machine/vehicle number: 15718, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Technical data: - Year of construction: 2023 - Serial number: 15718 - Bending force: 40 t - Working length: 1300 mm - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request. Hodpfsz Aa Haox Af Ssu

Condition: used, Year of construction: 1971, Max. pressing length: 2500 mm Max. pressing width: 1300 mm Total pressing force: 60 t Press opening width: 350 mm Heating plate material: Aluminum Operation: Hand lever Number of pressure plungers: 6 pcs Approximate weight: 3500 kg Dimensions: 3230 x 1340 x 1775 mm Hjdpfsz Hl Nrjx Af Seu Location: Nattheim

Condition: used, Year of construction: 1997, Format: 1300 x 920 mm Equipment: Maximum die-cutting size with front waste: 1,300 x 905 mm Maximum die-cutting size without front waste: 1,300 x 915 mm Maximum embossing size: 1,300 x 900 mm Paper: approximately 80???90 g/qm2 and above Solid board: up to approximately 2,000 g/qm2 Corrugated board: up to approximately 4 mm Equipment: Operating platform Machine raised by approximately 650 mm Removable platform section at the feeder Recently installed asynchronous main motor Manual non-stop feeder pallet Pile table with manual lateral correction during production Adjustable suction unit Automatic feeder-head adjustment Double-sheet detection Sheet down-holder for guiding sheets to the front lays Upper frame with manual lifting device Upper transport equipment for paper and cardboard Die-cutting, pressing/creasing and embossing, separately or simultaneously Hsdoz Hnayjpfx Af Sou Oil conditioner for maintaining the correct operating temperature Automatic removal of internal and marginal waste Condition and availability

Condition: excellent (used), CATALOG NUMBER 7753 TECHNICAL SPECIFICATIONS - Maximum diameter of workpieces: 130 mm - Fitted sleeve: 110 mm - Maximum diameter of input material: 160 mm - Minimum length of input material: 800 mm - Maximum allowance for machining per side: 15 mm - Cutter head drive motor: 15 kW - 3 feed speeds + forward/reverse - Feed motor: 1.1 kW In sequence: - 3 geared pull rollers - 3-knife cutter head - 3 smooth pull rollers - Dimensions (length/width/height): 3100x1400x1500 mm - Weight: 2100 kg ADVANTAGES – Polish production – 3-knife cutter head – Used lathe, very good condition Hedezulqnspfx Af Seu Net price: 32,900 PLN Net price: 7,651 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Condition: excellent (used), Catalog number 7979 TECHNICAL DATA - Max. diameter of workpieces 130mm Hsdpfxszwwwls Af Ssu - Fitted sleeve 57mm - Min. length of input material 800mm - Tool head drive motor 18.5kW - 4 types of feed speeds + forward/reverse - Feed motor 2.2kW In sequence: - 6 toothed draw-in rollers - 3-knife tool head - 6 smooth draw-out rollers - Diameter of exhaust outlet 140mm - Additional sleeves included: 40, 45, 50, 75mm - Dimensions (L/W/H) 3100x1300x1400mm - Weight 2100kg ADVANTAGES - Made in Poland - 3-knife tool head - Additional sleeves included: 40, 45, 50, 75mm - Used lathe, very good condition Net price: 31900 PLN Net price: 7419 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: fully functional, travel distance X-axis: 8,500 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 320 mm, nominal power (apparent): 8 kVA, workpiece length (max.): 8,500 mm, total height: 3,100 mm, total length: 11,500 mm, total width: 3,000 mm, rotational speed (max.): 15,000 rpm, overall weight: 6,000 kg, spindle speed (min.): 15,000 rpm, spindle motor power: 5,500 W, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Elumatec SBZ 130 CNC 3-axis steel processing center, TOP condition Processes steel, stainless steel, aluminum, PVC, etc. The machine can mill, drill, tap, cut, and notch. All machining operations are performed while the profile is stationary. Hedpfx Afeziy Ids Seu 8-position tool changer on a turret. Max. milling cutter diameter: 80 mm Max. disc cutter diameter: 200 mm Tools and accessories, including special wrenches, as shown in the picture. Tool holder: BT 30 Max. machining length: 850 cm, with stringer-side machining: 838 cm, y-axis: 48 cm, z-axis: 320 cm Year of manufacture: 2010, spindle speed: 15,000 rpm, spindle power: 5.5 kW Weight: approx. 6 tons. Includes laser and partition, protective mat, machining accuracy: x-axis, y-axis, z-axis +/- 0.1 mm Air consumption: approx. 75 liters, with spray nozzles. Inspection is possible by appointment. The machine is located in 91629 Weihenzell.

Condition: used, Year of construction: 2011, We are offering this used Wegoma DS 130 BC miter saw, manufactured in 2011, for sale. Type: DS 130 BC Serial number: 09438 Year of manufacture: 09/2011 Hsdpjz Ag Ecjfx Af Ssu If you have any questions or require further information, please feel free to send us a message.

Condition: excellent (used), functionality: fully functional, 4 spindles: bottom/right/left/top Hedezz Nq Sopfx Af Sou Chromed tables Working width: 130 mm Working height: 100 mm Feed speed regulated by inverter up to 36 m/min Spindle diameter: φ40 mm Total power: 16.8 kW Year of manufacture: 2021 Weight: 2550 kg

Condition: good (used), Year of construction: 1996, functionality: fully functional, input voltage: 380 V, Rühle Tumbler Hodpfx Aoz D Dryjf Sou MKR 130 380V With vacuum and cooling.

Condition: ready for operation (used), functionality: fully functional, Industrial meat grinder. KG WETTER WW 130. In excellent condition. Hedszyqmrjpfx Af Ssu

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Automated welding machine LASKA TYPE: W 130-H Year of manufacture: 2022 Fully functional Accessories: Extension arm, operating manual Shipping possible Hodpfx Afozypzns Seu

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Factory liquidation mask production line. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for dispatch. - Cross tables available - Ink return system integrated - Lateral lift integrated, can be deactivated if required Hjdpfxexqgk Ue Af Ssu The HERMETIC series can be used both as manual workstations and in automated applications. In manual operations, the machine impresses with its wide range of settings and high printing force; in automated applications, it stands out for its cam control system, which ensures a smooth and stable printing process. The absolute highlight is its drive mechanism: both the up-and-down movement of the printing pad and the forward and backward movement of the pad printing cliché are controlled by a cam disk.

Condition: ready for operation (used), Heidenhain UV 130 ID 324 998-01 SN:7840727D – complete with test report, professionally overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Hedpfx Asz Hib Sef Ssu Please note: In the exchange process, your defective exchange part must not have any mechanical damage, such as breakage, as these cannot be repaired. In this case, an additional charge of €400, including VAT, will be applied. Attention: You are bidding on a Heidenhain UV 130 ID 324 998-01 SN:7840727D inverter for exchange (exchange service). It has been professionally completely overhauled and tested and comes with a 3-month warranty. It is 100% functional, and the scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €400, including VAT, will be issued.

Condition: ready for operation (used), Heidenhain UV 130 ID 324 998-01, serial number: 7840727D – including test report, used, in good condition, 100% functional, scope of delivery as shown in the photos, professionally and completely refurbished and tested, with a 3-month warranty, 100% functional, scope of delivery as shown in the photos. Hsdpfxjz Hib Ee Af Sju