Used Aro 2104A Dc for sale (4,176)

Year of construction: 1990, condition: used, machine/vehicle number: 9072492, nominal capacity: 100 kVA Chsdpez H Dyofx Ai Nja throat: 500 mm spark plug air gap: 330 - 500 mm electrical connection: 400 V kW space needed: 700 x 1420 x 2000 mm weight: 750 kg

Condition: used, AC spot welding machine, projection welding machine ARO Type MA 350 DC AC resistance welding machine Machine No. MA35031332 / 9731122B110 / Year of manufacture 1997 Power at 50% duty cycle 30 kVA Codpfxshpf Iyj Ai Njha Power at 100% duty cycle 21 kVA Maximum welding power 156 kVA Reach 550 mm Electrode arm diameter 60 mm Electrode holder diameter 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 Volt, 50 Hz Connected power 75 kVA / 63 Amps / Conductor cross-section 3x 16 mm² Possible sheet metal combination max. 5 mm + 5 mm - Welding control ARO Micro 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuously adjustable welding current via thyristor module - Parallel electrode guidance - Double-stroke welding cylinder (pre-stroke / welding stroke) - Operating mode: single stroke and series of spots - Electrode force continuously adjustable via air pressure - Water-cooled via external water cooling (water chiller not included) - Electric foot switch - Control cabinet with control unit permanently mounted on the machine - PC interface RS 485 - Welding point counter - Operating manual for control unit, spot welding machine and electrical diagram available Space requirement W x H x D 520 x 1550 x 1150 mm Weight 290 kg Very good condition

Condition: good (used), mileage: 48,677 km, power: 106 kW (144.12 HP), first registration: 07/2023, fuel type: diesel, tire size: 215/65R16, axle configuration: 4x2, wheelbase: 3,280 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 6, total length: 5,400 mm, total width: 1,850 mm, total height: 1,950 mm, loading space length: 1,800 mm, loading space width: 1,590 mm, loading space height: 1,310 mm, Year of construction: 2023, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Tinted windows Chodpfxezpd Rie Ai Noa - Halogen lamp - None - Manual - Radio/cassette - Fabric - Partition = Notes = Configuration: 4x2, Payload: 1285 kg, Unladen weight: 1745 kg, Gross vehicle weight: 3030 kg, Towing capacity, unbraked: 750 kg, Towing capacity, center axle, braked: 2500 kg, Tow hitch, Cabin type: Double cab, Cruise control, Air conditioning, Number of airbags: 4, Parking assistance: Front and rear, Tinted windows, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: White, Maintenance manual, Heated mirrors, Lighting type: Halogen lamp, Bluetooth, Engine power: 106 kW (142 Hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Side wall cladding, Roof rack: None, Side doors: 1, Side windows: 2, Rear closure: Double door, Central locking, Number of seats: 6, Seat arrangement: 1+2+3, Seat cover: Fabric, Seat adjustment: Manual, XL, double cab, air conditioning, navigation, pdcl, tow hitch, 48,000 km, Tire type: All-season tires = Additional Information = General Information Number of doors: 1 License plate: VXB-60-S Axle Configuration Tire size: 215/65R16 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 3 mm Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Weights Unladen weight: 1,745 kg Payload: 1,285 kg GVW: 3,030 kg Functional Loading area height: 58 cm Maintenance APK (Technical Inspection): valid until 07.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: 384 € per month (delivery van, 72 months); Please inquire for further information and conditions.

Condition: used, mileage: 133,050 km, power: 120 kW (163.15 HP), first registration: 03/2019, overall weight: 2,900 kg, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, loading space width: 1,620 mm, loading space length: 1,430 mm, loading space height: 1,000 mm, total length: 5,254 mm, total width: 1,954 mm, total height: 1,834 mm, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Internal vehicle number: 5617X ----Why autonext? Over 400 immediately available cars & commercial vehicles. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing & trade-in options possible. Entire vehicle range available at autonext - Mobility made easy. WhatsApp chat: ### Offer: Financing from 4.99% ### ----Top condition! 1st owner, German vehicle, non-smoking vehicle Complete service history exclusively at Volkswagen Next service in 36,800 km 8 tires Winter tires on steel rims Like-new snow plow "Schoon Fahrzeugsysteme" Winter service Road legal Trailer hitch, permissible trailer load 3,000 kg Bott drawer system in the cargo area Codpfx Aijymcrzo Nsha All-wheel drive ---- Special equipment: * Audio system Composition Media (touchscreen, radio/CD player, MP3, Bluetooth) * Electronic voice amplification (internal communication) * Multimedia interface USB (iPhone / iPod) with AUX-IN * Bluetooth interface for mobile phone * App-Connect * Climatronic 2-zone air conditioning * Interior filter: dust and pollen filter with activated carbon filter * Steering wheel (leather) * Leather trim (shift/selector lever and handbrake lever in leather) * Shift/selector lever in leather * Handbrake lever in leather * Winter package * Heated windshield washer nozzles * Display for windshield washer fluid level * Front seat heating * Trailer hitch * Differential lock (rear axle) * Rubber floor mats * Hardtop Highline (pickup) * Comfort tailgate (lockable, pickup) * Cargo area lining * Warning marking film exterior Standard equipment: Electronic Stability Program (ESP), Brake Assist, ASR/ABS, EDS, Anti-lock Braking System (ABS), Off-road ABS, Brake Assist, Electronic Differential Lock (EDS), Traction Control (ASR), Electronic Stability Program (ESP), Spare wheel in driving condition (steel), On-board tools and jack, 2nd row of seats (3 seats), 3rd brake light LED, Airbag passenger side switchable, Airbag driver/passenger side, Drive type: all-wheel drive, Exterior mirror aspherical, left, Exterior mirror electrically adjustable and heated, Exterior mirror convex, left, Exterior mirror painted, Floor covering rear (carpet), Floor covering front (carpet), Headliner fabric, gray, Driver assistance system: trailer stabilization program, Driver assistance system: hill start/descent assistant, Driver assistance system: multi-collision brake, Power windows front and rear, Remote control (1) foldable, Cruise control, 6-speed transmission, Glove compartment lockable, Heated rear window, Interior trim: decorative inserts Deep Inox, Isofix mounts for child seat on rear seat, Body/structure: double cab (double-cab), Body/structure: pickup, Fender flares in body color, Radiator grille black with chrome trim, Steering column (steering wheel) mechanically adjustable, Height/longitudinal adjustment, Headlight range adjustment, Model update, Engine 3.0 L - 120 kW V6 TDI, Multi-function display Plus, Fog lights, Wheelbase 3097 mm, Smoker's package, Particulate filter, Low emissions according to emission standard Euro 6, Mud flaps front and rear, Side airbags front with head airbag unit, Power steering electronically controlled (Servotronic), Seat belts front with belt tensioner, height-adjustable, Seat cover / upholstery: fabric, Rear bumper black unpainted.

Condition: used, mileage: 60,401 km, power: 107 kW (145.48 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,280 mm, first registration: 08/2024, fuel tank capacity: 70 l, CO₂ emissions: 205 g/km, emission class: euro6, color: grey, number of seats: 6, number of previous owners: 1, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, trailer coupling, = Additional Options and Accessories = - Multifunctional steering wheel - Rear parking sensors - Sliding door on the right side - Android Auto - Trailer hitch with detachable ball - Apple CarPlay - Driver attention assist - Automatic high beam - Heated exterior mirrors - Passenger airbag - Bluetooth - Electric front windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Speed-sensitive power steering - Speed limiter - Tinted glass - Wooden load compartment - Height-adjustable driver's seat - Height-adjustable steering wheel - Collision mitigation by braking - Front airbags - LED daytime running lights - Lumbar support - Front center armrest - Radio - Radio with DAB - Rain sensor - Tire pressure monitoring system - Rear view camera - Headlight assistant - Front side airbags - Lane keeping assist - Immobilizer - Traffic sign recognition - Connected services - Fully digital instrument cluster - Partition = Additional Information = General Information Number of doors: 5 Model range: Nov. 2023 - Oct. 2025 Cab: double Technical Information Torque: 340 Nm Number of cylinders: 4 Engine displacement: 1,997 cc Transmission: 6 gears, manual transmission Acceleration (0–100): 12.4 s Top speed: 180 km/h Dimensions Length/Height: L3H1 Dimensions (L x W x H): 533 x 192 x 196 cm Weights Unladen weight: 1,842 kg Payload: 1,238 kg GVW: 3,080 kg Interior Interior: black Consumption Average fuel consumption: 7.6 l/100km Maintenance, History and Condition Chodpozmxxpofx Ai Noa Service booklets: Available APK (Periodic Vehicle Inspection): valid until 08.2027 Number of keys: 2 (2 remote controls) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: excellent (used), CATALOG NUMBER 7729 Codpfszh H Inex Ai Njha TECHNICAL DATA Equipment: - Tape holder - Glue tank (granulate) - Tape feeder - Guillotine – pre-cutting the edging - Pressure rollers 2 pcs - Min. width of processed components: 50mm - Thickness of processed components: 10-40mm - Min. internal radius: 50mm - Angled gluing with 1mm thick edging, 0-45° - Edge thickness: 0.3-3mm - Electric feed - Total power: 2kW - Compressed air pressure: 6-7 bar - Dimensions (L/W/H): 1700x1300x1550mm - Weight: 310kg ADVANTAGES – Made in Poland – Unpainted – DTR technical documentation – Very good condition – used edge banding machine Net price: PLN 6500 Net price: EUR 1550 (exchange rate: 4.2 EUR) (Prices may vary depending on larger fluctuations)

Condition: excellent (used), HSS saw grinder Businaro model Rekord Control Cjdpfswyc Hgex Ai Njha

Year of construction: 2001, condition: excellent (used), JAROMA DCGA II LIGNUM curved edge bander Producer JAROMA DCGA II machine model / type Year of production 2001 Machine category Edgebander Location Gorzów Wlkp. Conditions of delivery own collection Cost of delivery Customer cover Startup type to be agreed Description Comments Cedpfx Aijgyz Rke Noha Equipment: - plate - guillotine - glue spreader - clamp - feed - adjustable table at 0-45 ° - workpiece thickness 1-4cm - edge thickness 0.03-0.3cm - 2 types of feed speed 4m / min, 6m / min - 2kW motor Overall dimensions: - length 127cm - width 165cm - height 148cm - weight 300kg - used edgebander - very good condition - unpainted - Polish production - year 2001

Condition: excellent (used), DCN JetCook vessel500 litre 650 litres, direct from closed Babyfoods facility. Chodpfx Aijy I Di So Nja

Condition: used, mileage: 122,936 km, power: 89 kW (121.01 HP), first registration: 03/2019, fuel type: diesel, next inspection (TÜV): 08/2026, fuel: diesel, color: white, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, sliding door, traction control, trailer coupling, ,, Chodpjym I N Sjfx Ai Nsa * More 1500 vehicles can be found on our homepage, leasing and financing also possible without down payment!\*Our prices are cash collection prices, i.e. additional work such as retrofitting a tow bar, second set of tires, customer service, warranty, carefree packages, etc., will be charged additionally.\*Despite the greatest care, advertising errors cannot be excluded and are therefore without guarantee! Input errors, prior sale and errors excepted. Equipment and consumption details are based on the VIN data query via the DAT SilverDAT system. The VIN details are not part of the purchase contract.\*Our new cars: Due to various manufacturer specifications, it is possible that these have already received a daily and short-term registration or will receive one before sale. ... Subject to changes, prior sale and errors excepted

Condition: excellent (used), For sale: SEW-EURODRIVE WA20/T DT71D6/BMG/TH geared motor with a built-in 24 V DC electromagnetic brake. The unit is fully functional, tested, and ready for use. The technical condition is very good. The housing has normal signs of use in the form of minor scratches and abrasions, which do not affect the operation of the device. Technical data: Manufacturer: SEW-EURODRIVE Gearbox model: WA20/T Motor type: DT71D6/BMG/TH Power: 0.25 kW Supply: 3×230/400 V Δ/Y Frequency: 50 Hz Rated current: 1.48 / 0.85 A Motor speed: 880 rpm Output speed: 45 rpm Torque: 37 Nm Gear ratio: i = 19.50 Codpfx Aijzn Npze Noha Protection class: IP54 Insulation class: F Brake: 24 V DC Braking torque: 5 Nm Weight: 11.66 kg

Condition: excellent (used), For sale: SEW-EURODRIVE WA20/T DR63M6/BR/TH geared motor with a three-phase motor and a 24 V DC electromagnetic brake. The unit is fully functional, tested, and ready for operation. The technical condition is very good, with normal signs of use and minor scratches on the housing. Technical specifications: Manufacturer: SEW-EURODRIVE Gearbox model: WA20/T Cjdpfx Ajzn Ngaei Neha Motor type: DR63M6/BR/TH Power: 0.12 kW Supply voltage: 3×230/400 V Δ/Y Frequency: 50 Hz Current: 1.00 / 0.57 A Motor speed: 900 rpm Output speed: 15 rpm Torque: 32 Nm Gear ratio: i = 60.00 Ingress protection: IP54 Insulation class: F Brake: 24 V DC Weight: 9.46 kg

Condition: excellent (used), For sale: SEW-Eurodrive WA20/T geared motor with a three-phase DR63M6/BR/TH motor and an integrated 24 V DC electromagnetic brake. The unit is 100% functional, tested, and ready for operation. Before sale, the geared motor was thoroughly inspected and operates flawlessly. The motor housing has some broken cooling fins, which are clearly shown in the pictures. This damage is purely mechanical and does not affect the proper operation, performance, or reliability of the unit. Apart from that, the geared motor shows normal signs of wear and tear resulting from use. Technical specifications: Manufacturer: SEW-Eurodrive Gearbox model: WA20/T Motor type: DR63M6/BR/TH Power: 0.12 kW Supply: 3×230/400 V AC, 50 Hz Motor speed: 900 rpm Output speed: 15 rpm Gear ratio: i = 60 Torque: 32 Nm Electromagnetic brake: 24 V DC Protection class: IP54 Insulation class: F Cedpjznaq Nefx Ai Neha Rated current: 1.00 A (230 V Δ) / 0.57 A (400 V Y) Power factor (cos φ): 0.65 Duty cycle: S1 Weight: 9.46 kg

Condition: good (used), Power: 15 KVA Execution: 530 mm Csdpfxsm Twicj Ai Noha

Condition: excellent (used), Miyachi Unitek HF25 DC Resistance Welding System controller. The unit is fully functional, starts up correctly, the display works, and all functions respond as expected. The screen displays the message “EMERGENCY STOP – OPERATOR ACTIVATED,” which indicates that the emergency stop circuit has been activated – this is not a malfunction of the device. This model is designed for precise control of the DC resistance welding process. It features a clear display, numeric keypad, the ability to program welding parameters, and RS-232 and RS-485 communication interfaces. Power supply: 380–400 V AC, 50/60 Hz. Technical specifications: Manufacturer: Miyachi Unitek Model: HF25 Type: DC Resistance Welding System Power supply: 380–400 V AC, 50/60 Hz Max. output current: 2400 A RMS Max. open-circuit voltage: 10 V Interfaces: RS-232, RS-485 Inputs include: FOOT SWITCH, AIR VALVE DRIVER, VOLTAGE SENSE, WELD HEAD Cjdjzma Sdspfx Ai Nsha Condition: Fully functional. Visual condition matches the photos – normal signs of use. The power cord has been repaired (insulated area visible in the photos). The repair does not affect the operation of the device, but this information has been included for full transparency of the sale.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Smart Line, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 180 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, power: 11 kW (14.96 HP), input voltage: 400 V, number of digital displays: 1, warranty duration: 12 months, Equipment: documentation/manual, emergency stop, DIGIMA W12-8x3200 Hydraulic Four-Roll CNC Plate Rolling Machine The DIGIMA W12-8x3200 is a hydraulic four-roll CNC plate rolling machine designed for accurate, repeatable and efficient sheet-metal forming. With a working width of 3200 mm, it is suitable for producing large cylindrical parts, sleeves, pipes, curved sections, housings, tanks and other technical components used in metalworking, steel construction, ventilation, machinery manufacturing and industrial production. The four-roll system provides a major advantage over conventional three-roll machines. The sheet is held securely between the upper and lower rolls, while the two side rolls perform the pre-bending and rolling operations. This arrangement allows both edges of the sheet to be pre-bent without removing and turning the workpiece, reducing handling time and limiting the length of straight sections left at the ends. The result is improved repeatability, higher productivity and more consistent part geometry. Chodpfx Aisznw T Us Nsa The W12-8x3200 can roll sheet metal up to 8 mm thick and perform pre-bending up to 6 mm. Its 3200 mm working length enables the processing of wide sheets for both one-off jobs and series production. The upper roll has a diameter of 210 mm, the lower roll 190 mm, and the side rolls 180 mm. The minimum rolling diameter is 400 mm, allowing the machine to produce a wide range of cylindrical and curved components. The hydraulic drive ensures smooth, stable movement and reliable clamping force throughout the forming process. The 11 kW motor provides the power required for regular industrial operation, while the rolling speed of 4 m/min supports efficient production without compromising process control. The rigid machine body and carefully arranged roll system help guide the material accurately and reduce unwanted deformation. Computerised CNC control makes the machine convenient to set up and operate. The operator can control roll movements, monitor the forming process and reproduce previously established settings for recurring jobs. This is especially useful in batch production, where the same diameter, radius and dimensions must be achieved repeatedly. The control panel also helps reduce setup time and simplifies everyday machine operation. The operating sequence is straightforward. First, the sheet is inserted and stabilised between the rolls. The side rolls then pre-bend the sheet edges, minimising flat ends. Finally, the material is passed through the roll system until the required tube, sleeve, arc or cylindrical shape is obtained. The machine can also be used for forming conical components by applying a controlled inclination of the rolls. Thanks to its wide working capacity and computer-controlled operation, the machine can be used in flexible workshop production as well as organised manufacturing processes. It is suitable for companies producing ventilation ducts, structural elements, machine covers, tanks, steel sleeves and custom-made components. Repeatable CNC settings are particularly valuable when several identical parts must be formed with the same diameter and curvature.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 300 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 260 mm, total height: 1,800 mm, total length: 1,650 mm, total width: 1,150 mm, wire diameter (max.): 18 mm, workpiece height (max.): 400 mm, workpiece width (max.): 580 mm, workpiece length (max.): 580 mm, type of input current: three-phase, table width: 600 mm, overall weight: 1,700 kg, table length: 600 mm, table height: 380 mm, empty load weight: 1,400 kg, warranty duration: 12 months, table load: 300 kg, input voltage: 400 V, quill travel distance: 80 mm, quill diameter: 6 mm, quill stroke: 80 mm, stroke length: 80 mm, tank capacity: 110 l, cutting speed: 600 mm/min, input current: 6 A, positioning accuracy: 2 mm, Equipment: documentation/manual, Digima DK7732 CNC EDM Wire Cut Machine – 320 × 400 mm Product Description The Digima DK7732 is a compact CNC EDM wire cutting machine designed for precise machining of small and medium-sized metal components. It is suitable for tool rooms, mould and die production, maintenance workshops, precision engineering companies, as well as single-piece and batch production. The machine provides an X/Y working travel of 320 × 400 mm, a 380 × 600 mm worktable, a maximum workpiece height of 400 mm, and a maximum permitted workpiece weight of 300 kg. Its rigid construction and machine weight of 1,400 kg help reduce vibration and support stable, repeatable machining. EDM wire cutting technology allows the machine to produce accurate contours, narrow slots, holes and complex shapes in electrically conductive materials, including hardened metals that may be difficult to process using conventional cutting tools. Main Advantages CNC-controlled EDM wire cutting machine Compact design suitable for smaller production areas X/Y worktable travel of 320 × 400 mm Large 380 × 600 mm worktable Maximum workpiece height of 400 mm Maximum workpiece weight of 300 kg Stable 1,400 kg machine construction Suitable for complex contours and precision components Designed for mould, die and tool production Suitable for single-piece and serial production Low operating energy requirements Reduced molybdenum wire consumption Suitable for long, continuous machining cycles Technical Specification Parameter Specification Brand Digima Model DK7732 Machine type CNC EDM wire cut machine Condition New Worktable dimensions 380 × 600 mm X/Y worktable travel 320 × 400 mm Maximum workpiece height 400 mm Taper capability 6° / 80 mm Maximum workpiece weight 300 kg Machine net weight 1,400 kg Machine dimensions 1,650 × 1,150 × 1,800 mm Control system CNC/MNC Movement method Linear control Control method Open-loop control Cjdpsznttdofx Ai Neha Processing accuracy 0.01–0.02 mm Molybdenum wire diameter Ø0.13–Ø0.18 mm Maximum wire speed 600 m/min Maximum cutting speed 200 mm²/min Best surface roughness ≤ Ra 0.8 µm Maximum working current 6 A Rated power 2 kVA Water tank capacity 110 litres Water filtration accuracy 0.005 mm Application Electrically conductive metal materials With a stated processing accuracy of 0.01–0.02 mm, cutting speeds of up to 200 mm²/min, and a best surface finish of up to Ra 0.8 µm, the DK7732 is suitable for applications where dimensional accuracy and surface quality are important. Stable and Economical Operation The DK7732 is designed for stable processing, relatively fine surface quality, low energy consumption and reduced molybdenum wire wear. It is particularly suitable for users who prioritise economical operation and long continuous machining cycles rather than exceptionally high cutting productivity. Delivery and Availability Availability: available Estimated delivery time: approximately 90 working days Transport and installation conditions: to be agreed individually Availability and delivery information should be confirmed before placing the final order. Why Choose the Digima DK7732? The Digima DK7732 combines a practical working range, rigid construction, high workpiece capacity and economical EDM technology. It is a suitable solution for companies looking for a compact wire cutting machine for accurate machining of moulds, dies, tools and specialised metal components.

Condition: used, mileage: 250,534 km, power: 89 kW (121.01 HP), first registration: 12/2016, fuel type: diesel, tire size: 205/65R16, axle configuration: 4x2, wheelbase: 3,500 mm, fuel: diesel, color: red, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 5,400 mm, total width: 1,960 mm, total height: 1,950 mm, loading space length: 2,750 mm, loading space width: 1,680 mm, loading space height: 1,450 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Fabric - Partition = Notes = Configuration: 4x2, Payload: 1265 kg, Unladen weight: 1725 kg, Gross vehicle weight: 2990 kg, Trailer load, unbraked: 750 kg, Trailer load, middle axle, braked: 2000 kg, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: Rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Color: Red, Heated mirrors, Lighting type: Halogen lamp, Engine power: 89 kW (119 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat covering: Fabric, Seat adjustment: Manual, Airco EXPORT, Spare wheel, Tread depth of spare wheel: 3%, Tire type: All-season tires = Further Information = General Information Number of doors: 1 License plate: V-607-BL Axle Configuration Tire size: 205/65R16 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Cedpfx Aszk Up Sei Nsha Weights Unladen weight: 1,725 kg Payload: 1,265 kg GVW: 2,990 kg Functional Loading area height: 57 cm Condition Overall condition: average Technical condition: average Optical condition: average Damage: Damaged vehicle (not roadworthy) Number of keys: 1

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Raytools, controller model: Raytools, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus, laser power: 3,000 W, laser wavelength: 1,080 nm, punching diameter: 1 mm, stroke rate (min.): 60 1/min, stroke rate (max.): 65 1/min, working length: 3,000 mm, working width: 1,500 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 9 mm, sheet thickness brass (max.): 7 mm, sheet thickness copper (max.): 7 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 2,200 kg, total length: 3,100 mm, total width: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, The Digima F1530 3kW is an advanced open-type fiber laser cutting machine designed for precise sheet-metal processing in manufacturing plants, metalworking companies and modern fabrication workshops. It is intended for businesses that require high cutting quality, strong performance and stable, repeatable operation in every The Digima F1530 3kW is equipped with branded components that enhance durability and cutting performance. The machine includes a RAYCUS laser source, a Raytools AUTO FOCUS cutting head, a Raytools control system, a Schneider servo system, a Japanese Shimpo reducer, H-class linear rails and an industrial TONGFEI / S&A cooling system. The entire unit is built on a heavy-duty industrial steel frame that has been heat-treated for improved stability and long-term resistance to deformation. Chsdpfszlr Syjx Ai Nea The machine also provides flexible use of assist gases, allowing the cutting process to be adapted to the material type and the expected edge quality. Oxygen at 1 MPa can be used for carbon steel, nitrogen at 2.5 MPa is intended for stainless steel and aluminium, and compressed air at 1.4–1.6 MPa offers a more economical option for thinner parts. This gives the user better control over cutting quality, process speed and operating costs. As standard, the machine includes features that improve operator safety and protect key components. A laser-head cover helps protect the cutting head from dirt and mechanical damage, while safety barriers create an additional protective zone around the working area, improving safety during intensive production work. The Digima F1530 3kW is powered by a 3P 380 V / 50 Hz supply, and the machine itself weighs 2000 kg. It is a modern and efficient fiber laser cutter for companies looking for a solution that combines a large working area, high precision, fast operation and industrial-grade durability. This model is a strong choice wherever reliable production, high cutting quality and future production growth are important.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 380 A, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, operating speed: 9 mm/s, reverse speed: 80 mm/s, table length: 1,320 mm, table height: 290 mm, throat depth: 180 mm, ram plate length: 500 mm, clearance between the columns: 900 mm, retraction force: 40 t, total length: 1,500 mm, total width: 1,300 mm, total height: 1,800 mm, overall weight: 1,500 kg, controller model: Estun NC E21, motor manufacturer: Siemens, Equipment: CE marking, documentation/manual, hydraulics, safety light barrier, The Digima WCY-40T/1320 hydraulic press brake is a compact and robust machine designed for the precise bending of sheet metal and smaller metal components. Its space-saving dimensions make it an excellent choice for metalworking workshops, manufacturing plants and companies producing enclosures, guards, panels, profiles and various technical components. The machine provides a nominal pressing force of 400 kN, equivalent to 40 tonnes, and a working-table length of 1,320 mm. The distance between the columns is 900 mm, the throat depth is 180 mm, the ram stroke is 100 mm, and the maximum open height is 290 mm. The back gauge offers an adjustment range of up to 500 mm, enabling the sheet to be positioned accurately before bending. The Digima WCY-40T/1320 is equipped with an Estun E21 NC control system, which controls the position of the back gauge on the X axis and the working position of the Y axis. The controller includes an operation counter, intelligent positioning, screw-backlash compensation and a function that retains the programmed position after the power supply has been switched off. A positioning resolution of 0.1 mm or 0.01 mm supports accurate and repeatable production. The press brake is powered by a 3 kW Siemens main motor. Its hydraulic system uses Bosch-Rexroth components and a Sunny hydraulic pump, while the electrical system includes Schneider Electric components. PARKER seals and guide rings increase the durability of the working mechanisms and support reliable operation during intensive daily use. The ram approach and return speeds are 80 mm/s, while the working pressing speed is 9 mm/s. These parameters enable efficient machine positioning and smooth bending operations. The rigid monoblock steel frame is welded and heat-treated to provide high structural stability and resistance to deformation under load. Chjdpfx Ajzlqkuei Noa The machine is equipped with side guards, a front safety curtain, protection against excessive hydraulic pressure and high oil temperature, motor overload protection, electrical leakage protection and a safety relay. The electrical cabinet has an IP65 protection rating, and the press brake is CE-certified. The standard equipment includes bending tools, two front material-support arms, a foot-control pedal, foundation bolts, spare sealing rings and mechanical and electrical documentation. The upper punch features an 86° working angle and an R0.5 tip radius, while the multi-V lower die allows the operator to select a suitable bending position according to the type and thickness of the material. The Digima WCY-40T/1320 is a practical, user-friendly and economical press brake for companies requiring a reliable machine for the everyday processing of small and medium-sized components. Its combination of a 40-tonne pressing force, a 1,320 mm working length, NC control and high-quality branded components makes it suitable for both one-off projects and small batches of repeatable parts.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 125 t, stroke length: 150 mm, table width: 2,650 mm, table length: 32,000 mm, throat depth: 320 mm, total length: 3,200 mm, total width: 1,850 mm, total height: 2,690 mm, overall weight: 9,800 kg, controller model: Estun E21, Equipment: 4th hydraulic function, CE marking, documentation/manual, safety light barrier, The Digima PBH-125X3200 hydraulic press brake is a professional machine designed for precise sheet-metal bending in manufacturing plants, metalworking workshops and companies specialising in metal fabrication. Its robust construction, high pressing force and large working area make it suitable for both individual projects and repetitive production batches. The machine provides a maximum pressing force of 125 tonnes and a working length of 3,200 mm. This makes it possible to bend long sheet-metal components and perform demanding production operations. The distance between the columns is 2,650 mm, the throat depth is 320 mm, the maximum opening is 415 mm, and the ram stroke is 150 mm. These parameters provide sufficient working space for components of various sizes and shapes. Chjdpfx Aijzlpane Nja The press brake is equipped with an Estun E21 controller, which allows the operator to program bending parameters and accurately control the position of the back gauge. The system can store up to 40 machining programs, each containing a maximum of 25 working steps. Automatic reference-point searching, rapid position indexing and parameter backup functions reduce machine setup time and improve the repeatability of finished components. The hydraulically driven bending beam ensures smooth and stable movement as well as consistent application of the pressing force. The machine is powered by a 7.5 kW motor. Precision ball screws and linear guides minimise mechanical play and support accurate component positioning. A Rexroth hydraulic valve system provides reliable oil-flow control, while electrical components from Schneider Electric and Lintech increase the safety and durability of the electrical installation. The AMADA quick-clamping system enables fast tool changes and reduces preparation time between different bending operations. The standard tooling includes a multi-V die suitable for bending sheets of different thicknesses and angles, as well as a four-piece punch set made from durable tool steel. The machine is also equipped with four adjustable back-gauge fingers, which help the operator position the material accurately before bending. Side and rear safety guards equipped with limit switches protect the operator from entering the working area while the machine is in operation. Opening a guard causes the machine to stop immediately, improving safety during everyday use. The Digima PBH-125X3200 is a solid and versatile press brake for companies requiring high bending accuracy, repeatability and production efficiency. Its high pressing force, 3,200 mm working length, functional control system and industrial-quality components make it a reliable solution for intensive use in a professional sheet-metal processing facility.

Condition: used, mileage: 11 km, power: 88 kW (119.65 HP), first registration: 02/2026, fuel type: diesel, overall weight: 2,656 kg, wheelbase: 3,275 mm, next inspection (TÜV): 02/2028, color: white, emission class: euro6, number of seats: 3, loading space volume: 5.6 m³, loading space length: 2,500 mm, loading space width: 1,600 mm, loading space height: 1,350 mm, construction height: 1,895 mm, working width: 2,010 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, sliding door, soot filter, traction control, Navigation via smartphone is possible. Air conditioning, central locking with remote control, electrically adjustable exterior mirrors, electrically adjustable, heated, and foldable exterior mirrors, electric front windows with anti-pinch protection, on-board computer, hill start assist (HSA), emergency braking assist, traffic sign recognition, drowsiness detection sensor, speed control system (cruise control), audio controls on the steering wheel, front and rear parking assistance with side parking sensors, rear view camera with 180-degree surround view, closed cargo area partition, spare wheel with road tires, summer tires, light sensor, windshield wipers with rain sensor, light and visibility package, automatic headlight activation including high beam assist, daytime running lights, fog lights, DAB tuner (digital radio reception), infotainment system: IVI MID with 10-inch touchscreen - DAB - Bluetooth interface, hands-free system with Bluetooth, USB interface, Apple CarPlay, Android Auto, tire pressure monitoring system, heat-insulating glass, tachometer, driver airbag, driver/passenger airbag, anti-lock braking system (ABS), electronic stability program (ESP), comfort seats, center armrest, driver comfort seat with armrest and lumbar support, start/stop system, diesel particulate filter, service booklet maintained, sliding door on the right, immobilizer, driver assistance system: blind spot assist, headlight range adjustment, outside temperature display, power steering, wooden cargo floor with interior trim and wheel arch covers, surround view package, socket (12V connection) 2x, city package, digital instrument cluster (10.0 inches), double front seat with storage compartment, vehicle keys (2) both foldable, safety belt warning system - driver's side, safety belt warning system - passenger side, socket (12V connection) in the cargo area, socket (12V connection) in the center console, tie-down points in the cargo area, autonomous emergency braking assist, braking assist, lane departure warning, wheel hub covers, adjustable steering column (steering wheel), visibility package, body style: vehicle length L2, halogen headlights, automatic headlight activation, high beam assist, windshield wipers with intermittent operation, safety system with automatic emergency call (ERA GLONASS / eCall), speed-sensitive power steering, SCR system (AdBlue technology), body/structure: van, drive type: front-wheel drive, wheelbase 3275 mm, 6-speed transmission. Over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank, or Auto Europa Bank; we will be happy to advise you. This offer is non-binding; no guarantee for equipment details. Listed equipment may need to be verified separately. Subject to changes, errors and prior sale. Delivery possible for an extra charge. Export license plates can be arranged here. Trade-in of your old vehicle is possible. Retrofitting options: - Trailer couplings, also up to 3500 kg possible - Auxiliary heaters - Screen for rear view camera and/or navigation via mobile phone (Android Auto) - Reversing system with rear camera - Workshop equipment - Cruise control - Retrofitting of a tailgate lift (LBW) and other individual solutions for your business needs are possible for an extra charge. Chodpfx Aezcqkdji Nsa

Condition: used, mileage: 12 km, power: 88 kW (119.65 HP), first registration: 02/2026, fuel type: diesel, overall weight: 2,656 kg, wheelbase: 3,275 mm, next inspection (TÜV): 02/2028, color: white, emission class: euro6, number of seats: 3, loading space volume: 5.6 m³, loading space length: 2,500 mm, loading space width: 1,600 mm, loading space height: 1,350 mm, construction height: 1,895 mm, working width: 2,010 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, sliding door, soot filter, traction control, Navigation via smartphone is possible. Air conditioning, central locking with remote control, electrically adjustable exterior mirrors, electrically adjustable, heated, and folding exterior mirrors, power windows in the front with pinch protection, onboard computer, hill start assist (HSA), emergency brake assist, traffic sign recognition, drowsiness detection sensor, cruise control, audio controls on the steering wheel, front and rear parking assistance with side parking sensors, rearview camera with 180-degree surround view, closed cargo area partition, spare wheel with road tires, summer tires, light sensor, windshield wipers with rain sensor, light and visibility package, automatic headlight activation including high beam assist, daytime running lights, fog lights, DAB tuner (digital radio reception), infotainment system: IVI MID with 10-inch touchscreen - DAB - Bluetooth interface, Bluetooth hands-free system, USB interface, Apple CarPlay, Android Auto, tire pressure monitoring system, heat-insulating glass, driver airbag, airbag on driver/passenger side, anti-lock braking system (ABS), electronic stability program (ESP), comfort seats, center armrest, driver comfort seat with armrest and lumbar support, start/stop system, diesel particulate filter, well-maintained according to service schedule, sliding door on the right, immobilizer, driver assistance system: blind spot assistant, headlight range adjustment, outside temperature display, power steering, wooden cargo floor with interior trim and wheel arch trim, surround view package, socket (12V connection) 2-way, city package, digital instrument cluster (10.0 inches), double front bench seat with storage compartment, vehicle keys (2), both foldable, safety belt warning system - driver's side, safety belt warning system - passenger's side, socket (12V connection) in the cargo compartment, socket (12V connection) in the center console, cargo lashing eyes, autonomous emergency brake assist, brake assist, lane departure warning, wheel hub covers, adjustable steering column (steering wheel), visibility package, body variant: vehicle length L2, halogen headlights, automatic headlight activation, high beam assist, windshield wipers with intermittent function, safety system with automatic emergency call (ERA GLONASS / eCall), speed-dependent power steering, SCR system (AdBlue technology), body/structure: van, drive type: front-wheel drive, wheelbase 3275 mm, 6-speed transmission. Over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank, we will be happy to advise you. This offer is non-binding, no guarantee for equipment details. Listed equipment may need to be checked separately. Subject to changes, errors and prior sale. Delivery possible for an extra charge. Export license plates available on site. We will accept your old vehicle in trade. Retrofitting of: - Trailer couplings, up to 3500 kg possible - Auxiliary heaters - Screen for rearview camera or navigation via smartphone (Android Auto) - Reversing system with rear camera - Workshop equipment - Cruise control - Retrofitting of a tail lift and other individual solutions for your business needs possible for an extra charge. Chodpozcqkkefx Ai Nsa

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 180 mm, spindle bore: 20 mm, turning diameter: 180 mm, turning diameter over bed slide: 180 mm, total length: 81 mm, total width: 31 mm, total height: 37 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, metric thread diameter (min.): 5 mm, metric thread diameter (max.): 25 mm, metric thread steps: 5, bed width: 350 mm, rotational speed (max.): 2,500 rpm, mount diameter: 10 mm, type of input current: DC, overall weight: 40 kg, quill mount: MK 3, cone diameter: 18 mm, spindle mount: MK 3, motor model: bezszczotkowy, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, type plate available, The Digima DC TYTAN 350 is a compact lathe designed for precise machining of metals and plastics. It is an excellent solution for small workshops, service centres, garages, technical schools, prototyping facilities and hobby applications. Its compact dimensions allow it to be installed in a limited workspace, while its robust construction provides stability and accuracy during operation. The machine is equipped with a powerful 850 W brushless motor and a direct-drive spindle. This solution ensures quiet operation, smooth performance and a long service life. The continuously variable spindle speed of 50 to 2,500 rpm allows the operator to adjust the machining parameters to the material, workpiece diameter and type of operation. Chjdpfx Aezlgtxsi Nsa The Digima DC TYTAN 350 can machine workpieces with a maximum swing over the bed of 180 mm and a distance between centres of 350 mm. The spindle bore measures 20 mm, while the supplied lathe chuck has a diameter of 100 mm. The machine can also cut metric threads from 0.5 to 2.5 mm and imperial threads from 12 to 52 TPI. The TYTAN 350 is suitable for producing bushes, shafts, pins, spacers, prototype components, replacement parts and small production batches. It allows users to manufacture and repair essential components directly in their own workshop, reducing outsourcing costs and waiting times. The standard equipment includes a 100 mm three-jaw lathe chuck, a drill chuck with an arbor, an MT2 live centre, a fixed centre, a set of five turning tools, operating and adjustment keys, and a rear splash guard protecting the workstation against chips and coolant. The machine is CE-certified and supplied with an operating manual. The Digima DC TYTAN 350 is a practical, user-friendly and versatile mini lathe which, despite its compact size, provides the performance required for real workshop applications. Its standard 230 V power supply means that no industrial electrical installation is required, making it a convenient solution for both professionals and demanding hobby users.

Year of construction: 2026, condition: new, functionality: fully functional, total width: 3,310 mm, total height: 2,830 mm, lifting height: 1,800 mm, mast type: triplex, drive type: elektrohydrauliczny, permissible axle load: 4,500 kg, arm reach: 1,400 mm, arm spacing: 2,820 mm, platform width: 2,820 mm, section length (min.): 110 mm, machine/vehicle number: TW240E, control type: manual, Equipment: 3rd hydraulic function, CE marking, documentation/manual, double-sided, type plate available, The Digima TW240E car lift is a professional, automatic two-post lifting system designed for everyday use in automotive workshops, mechanical service centres and vehicle maintenance facilities. With a lifting capacity of 4,500 kg, it is suitable for safely lifting passenger cars, SUVs and selected light commercial vehicles. The maximum lifting height of 1,800 mm provides convenient access to the underbody and allows mechanics to perform repairs, inspections and maintenance work comfortably. Chjdpezlgc Hjfx Ai Nja The TW240E features a robust base-frame construction with a floor-mounted connection between the columns. This solution makes the lift suitable for workshops with limited ceiling height. The overall height of the unit is 2,830 mm, the total width is 3,310 mm, and the clear distance between the columns is 2,820 mm. A minimum lifting height of 110 mm also makes it easier to service vehicles with low ground clearance. The lift is equipped with an electrohydraulic drive system powered by a 2.2 kW motor and a 380–400 V power supply. The automatic electromagnetic Solenoid Lock safety system allows the locking mechanisms to be released conveniently from the control panel. A 24 V low-voltage control system, emergency stop button and aircraft-grade cable synchronisation ensure stable, even and safe lifting of the vehicle. Universal two-stage and three-stage lifting arms make it possible to adjust the support points to vehicles with different wheelbases and body lengths. Adjustable rubber lifting pads with a height of 80 mm protect the vehicle sills and make correct positioning easier. Self-lubricating UHMW sliders and reinforced C-shaped arm holders increase the durability of the structure, ensure smooth operation and allow the lift to withstand intensive daily use. The Digima TW240E is a solid, functional and easy-to-operate lift for workshops that require a universal solution for servicing different types of vehicles. Its high lifting capacity, automatic safety systems, strong construction and CE certification make it a safe and durable addition to a professional workshop.