Used Angulus Guideline for sale (186)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, total length: 7,000 mm, total height: 3,200 mm, total width: 4,000 mm, type of input current: three-phase, input voltage: 400 V, volume flow: 24,000 m³/h, suction capacity: 24,000 m³/h, extraction nozzle diameter: 500 mm, power: 4 kW (5.44 HP), Equipment: cabin, For sale is a like-new mobile spray booth, EuroSys PT-99999, from Neue Protechnik AG, Neuenhof CH. The system was only in operation for a few months and is in perfect condition. The system is fully equipped and includes the mobile EuroSys spray booth with PVC material, 2 entrance gates of 1500x2800mm each with integrated filter holders, intake air filter M5, LED ceiling lighting, and the paint mist extraction unit PT-999998 with a 4kW motor (400V), 24,000 m3/h capacity, a 3-stage filter system according to LRV guidelines, exhaust pipe D500mm, and a chassis/underframe. The original invoice for CHF 22,900 is available. The system has already been completely disassembled, carefully packed, and is stored ready for pickup. An inspection before pickup is, of course, possible at any time. We are available to answer any questions and arrange viewings: Available via WhatsApp Several videos are available (including the running motor, etc.) (30 photos, 2 videos) Google Drive Iiedpfx Asz Nxk Nehyeh

Condition: excellent (used), Year of construction: 2021, operating hours: 120 h, functionality: fully functional, total height: 2,500 mm, total width: 3,000 mm, total length: 10,000 mm, TECHNICAL DATA * Standard dimensions of vacuum bags: 2650 x 5,150 mm * Dimensions for flat glass lamination (using silicone bags): 2,500 x 5,000 mm * Lamination frames: two * Maximum load per lamination frame: 1,200 kg distributed over the entire surface. * Vacuum pumps: two (one for each frame) * Heating zones: 9 zones, each monitored by a thermocouple. * Temperature measurement of heating chambers: 9 + 1 thermocouples connected to the PLC system. * Vacuum control and monitoring: Digital pressure sensors connected to the PLC system on the operator panel. * Overheat protection: one independent thermocouple inside the chamber, with the ability to cut off the power circuit in case of furnace overheating. * Electrical panel, control panel, and wiring: manufactured according to "EC" guidelines. * Safety features: according to "EU" guidelines. * Installed power / power supply: 54 kW per chamber. Iiodpoz Ihikjfx Ahyeh 400V 50 / 60Hz, three-phase + N + T * Average consumption: < 20 kW per hour. * Control / monitoring system with TEMA 2020 SOFTWARE: -PLC system and intuitive operator graphic interface with touchscreen. -Multilingual -Up to 6 (six) settings, with no time limitations. -Real-time graphs: average temperature of the furnace and modules, each heating zone, vacuum (with the possibility of disconnecting the pump at any time). -Power consumption. -Historical archive of data from the last 500 hours of production, displayed in a graphic and text file. -Log of all operations and alarms. -Program < EASY MAINTENANCE > for vacuum pumps. -Delayed start of the process (for night use) -kW meter. -Remote control from various devices (smartphone, tablet, computer, etc.) -Report of the entire lamination process downloadable via USB. -Remote assistance LIFT – lifting platform * Lifting platform with servomotor assistance to align the lamination frames with the laminating frame. Essentially consists of a single hydraulically controlled lifting platform, equipped with appropriate tracks for moving the lamination frame.

Condition: excellent (used), Year of construction: 2010, Used machine in top condition – training machine – Year of manufacture: 2010 Digital display in Y Equipment and technical data Cutting length: 3300 mm Cutting height: 2200 mm (edge trimming height 2110 mm) Cutting depth: max. 60 mm Extraction: - Saw unit 120 mm - Lath grid 100 mm Workpiece support: - Sturdy plastic support for optimal stability, even for narrow workpieces. Tilting roller transport system: Manual for easy and material-friendly transport Locking: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Isdpezzfr Eefx Ahyoih Circular saw blade: Diameter: 250 mm Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding guide rail: incl. workpiece support for narrow parts with strip stop Dust extraction system in accordance with BG guidelines TRK (below 2 mg of fine dust / m³ of air) Availability: immediate Location: 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2021, operating hours: 700 h, functionality: fully functional, cutting width (max.): 3,200 mm, table height: 800 mm, overall weight: 1,610 kg, total width: 4,000 mm, total height: 800 mm, total length: 7,000 mm, table width: 3,200 mm, table length: 3,200 mm, Equipment: safety light barrier, Are you looking for a Zund cutting table in perfect condition? Due to changes in our production processes, we are offering our exceptionally young and fully equipped Zünd G3 3XL-3200 for sale. Featuring a massive working area of 3200 mm x 3200 mm, this machine is the ultimate production tool for processing wide-format textiles and XXL flatbed materials. With only 700 production hours on the clock, the system is in absolute mint condition. Equipped with an extended table and a professional unwinding system, this setup is fully optimized for a highly efficient, continuous, and tension-free roll-fed workflow. Key Specifications & Configuration: • Working Area: 3200 mm x 3200 mm (3XL-3200) – Accommodates materials up to 3.2 meters wide! • Extended Table: Ideal for seamless material advance, easy weeding/offloading, and uninterrupted production. • Unwinding System (Roll Feed): Industrial textile unwinder ensuring perfectly tension-free and straight material feeding directly from the roll. • Software: Includes Zünd Cut Center (ZCC) software license. Ijdjz Inc Rjpfx Ahyoih Included Modules and High-End Tools: • DRT (Driven Rotary Tool): Driven rotary tool specifically designed for reliable, fast, and wrinkle-free cutting of various textiles (such as banner material, polyester, canvas, and mesh). • Registration System: Integrated camera system for precise registration mark recognition and automatic contour compensation. Machine Condition: The machine is in absolute mint condition and has only operated in a clean production environment. It has been fully maintained according to factory guidelines. The Zünd is currently still installed under power and can be demonstrated fully operational for serious inquiries. Decommissioning, transport, and installation are at the buyer's expense and risk (assistance in contacting certified Zünd technicians can be provided).

Condition: used, Year of construction: 2008, functionality: fully functional, total height: 2,100 mm, total length: 1,800 mm, total width: 1,000 mm, type of input current: three-phase, overall weight: 255 kg, table load: 200 kg, input voltage: 400 V, A down-draft table combines a workbench with an exhaust/filtration system. Fumes and dust are extracted through the tabletop and rear panel and filtered by filters mounted in the table structure. The table can be placed anywhere, at any welding or grinding station. A three-stage spark separator enhances safety and meets the most stringent international guidelines for fumes and dust. DraftMax Advance features a manually operated filter cleaning mechanism activated by a button. In addition, the DraftMax Ultra model can be equipped with an automatic start/stop device, which provides even easier operation. This is an ideal table for very intensive welding or grinding applications. Ijdpfxjzukv Ns Ahyeih Work surface dimensions: 1366 mm x 750 mm Weight: 255 kg Noise level: 67 dB (version with silencer and HEPA filter) Supply voltage: 400 V/3~/50 Hz Motor power: 2.2 kW Capacity: 2500 m³/h Filtration area: 2 x 26 m² Filtration efficiency: >99.9% (filter class: M) HEPA filter (required for stainless steel welding) Noise silencer Stock number: 1151

Condition: reconditioned (used), Year of construction: 1993, operating hours: 4,110 h, functionality: fully functional, power: 22 kW (29.91 HP), overall weight: 2,500 kg, Residual Wood Chipper / Wood Shredder / Slow-Speed Pusher Floor Grinder Refurbished WEIMA Model: WL10 Year of manufacture: 1993 Extraction diameter: 250 mm Motor power: 22 kW Rotor length: 98 cm Feed hopper approx. 120 x 100 cm Number of knives: 24 pcs. Knife dimensions: 30 x 30 mm Screen: 30 mm (includes second screen: 35 mm) Dimensions approx. 2.5 x 1.7 x 1.85 m Weight approx. 2,500 kg Iedpfx Asy Ahr Hohyeih The machine has been refurbished: - Rotor shaft newly mounted - New paintwork - Pusher floor sliding rails replaced - Oil changed - Rotor shaft overhauled (partially new knives and holders, etc.) Condition as shown in images; please also refer to the item description. Collection by the buyer is possible. All dimensions are approximate. All information given to the best of our knowledge, but without guarantee. Subject to prior sale. Items can be collected by the buyer or shipped at the buyer's expense. Shipping costs are provided as a guideline; final costs may vary depending on distance and unloading options. The stated sales price is the net final amount, plus VAT. An invoice with VAT shown will be issued. Warranty basis: Due to wear and tear of used parts, the items are generally sold as defective – for spare parts only and to business buyers. By submitting a bid, the buyer accepts this as the basis of the sales contract. For used items, warranty period is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, any warranty is excluded. For new items, warranty period is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 02.086.00, pressing force: 40 t, For sale is a try-out press (spotting press) from manufacturer REIS with a maximum pressing force of 40 t. The machine features a table size of 1,280 × 900 mm, a maximum installation height of 1,035 mm, and a stroke up to 1,100 mm, making it suitable for spotting, adjustment operations, and tool modifications in mould and tool making. ##### Technical Data & Information: Spotting Press – 40 t – 1,280 × 900 mm ==== General Details - Design: 4-column press - Manufacturer: REIS - Year of manufacture: 1984 - Press force: 40 t (adjustable) - Return force: 20 t - Distance between columns: 930 × 705 mm - Max. installation height: 1,035 mm - Table size: 1,280 × 900 mm - Overall dimensions (W x D x H): approx. 3,800 × 1,850 × 3,600 mm - Total weight: approx. 9,000 kg - T-slots: DIN 650 – 18 mm Iedsy Ec H Rspfx Ahysih ==== Hydraulic Cylinder - Stroke: 0–1,100 mm (adjustable) - Cylinder diameter: Ø 160 mm ==== Hydraulic System & Drive - Flow rate: 24 l/min - Operating pressure: 200 bar - Motor power: 9.5 kW ==== Movement System - Ram swivel unit: approx. 175° - Extendable table: yes - Table ejector: available ==== Controls - Operation: Control panel - Additional function control: Oil ports for core pulls (2 units) ==== Safety - Mechanical anti-drop protection ==== Electrical Connection - Main supply: 400 V AC - Fuse protection: 35 A - Frequency: 50 Hz - Connected load main motor: 9.5 kW ##### Areas of application: spotting, adjustment, toolmaking, mould making, plastics engineering, automotive, maintenance (spotting press, try-out press, test press, hydraulic press, 40 t press, 40 tonne press, 4-column press, tool adjustment press, tryout press, tool try-out press) Are you looking for a hydraulic press tailored to your specific application? Contact us for a customised quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements as they fully comply with the national Brazilian safety guideline NR 12, which builds on these standards. Our core strength lies in custom machine construction and press automation. We supply bespoke hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses predominantly utilise components from leading European manufacturers.

Condition: excellent (used), Year of construction: 2019, Counter: 1,200,000 units Cycle counter: 8,297,167 cycles Hour counter: 5,281 hours Equipment / Additional information: Machine consists of: 1 x Main feeder 1 x Opener 4 x Insert stations 1 x Wrapping system (10,000 cycles per hour) with side sealing 1 x CROSS STACKER RIMA 1 x Friction feeder 1 x Mosca inline coating unit 1 x 90° curve Iijdpfx Ahjz A Dmhsysh Options: 1 x Videojet BX 6500 ( 2019 ) TECHNICAL DATA Product infeed: manual as standalone/automatic in line Film: centre-folded and flat film, e.g. PE, PO, PP, bio films, recycled content films Output: max. 10,000 cycles/h Passage width: 10–450 mm Passage height: max. 200 mm Product length: min. 80 mm Film width: max. 1,000 mm (flat film) Film roll diameter: max. 350 mm Control system: Siemens Sinamics D Display: Siemens 9" TP 900 touchscreen Electrical design: in accordance with VDE guidelines Working height: adjustable from 850–950 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Technical Specifications: - Laser Source Power: 3000 W (3 kW) - Sheet Dimensions (X x Y): 3000 mm x 1500 mm - Tube Length Capacity: 6000 mm (6U execution) - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) - Chuck System: Automatic pneumatic / electric self-centering chucks - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm - Cuttable Materials and Guideline - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Brass / Copper: max. 6 mm Accessories and Scope of Delivery: - Factory industrial water chiller unit - Automatic voltage regulator / stabilizer - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Iiedpfxeznwu Ss Ahyeh Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in live production and can be inspected and tested under operating conditions by prior appointment. Subject to prior sale. Under power in Hungary.

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 830397, functionality: fully functional, power: 85 kW (115.57 HP), temperature: 1,000 °C, inner dimension length: 1,600 mm, inner dimension width: 700 mm, inner dimension height: 950 mm, The item is offered as a "Premium Listing" – the sale is qualified and curated by Maschinensucher. Used in a large German corporation, adhering to applicable guidelines and maintenance recommendations. ACQUISITION COSTS Original purchase price in 2008: €490,000 plus VAT Retrofit in 2022: €254,000 plus VAT TECHNICAL DETAILS Dimensions of the heat treatment unit Housing width, including control cabinet: 3,600 mm Overall length with attachments: 7,000 mm Height above furnace floor: 4,900 mm Loading height above furnace floor: 1,200 mm Pit depth: 630 mm Internal height of the furnace chamber: 950 mm Internal depth of the furnace chamber: 1,600 mm Internal width of the furnace chamber: 700 mm Temperatures Rated furnace temperature: 1,000 °C Operating furnace temperature: 850 °C Oil bath temperature: 60 °C Dimensions of the furnace control cabinet Width: 2,000 mm Depth: 600 mm Height with 100 mm base: 2,100 mm Weights and Volumes Weight of multi-purpose chamber furnace: 22,000 kg Isdpfxoy Uxt Es Ahyoih Oil bath volume: 7.5 m³ Weight of switchgear: 600 kg Total weight of furnace with oil and charge: 30,000 kg Energy Data Total connected load: 85 kVA Supply voltage: 400 V Supply frequency: 50 Hz Number of phases: 3 Oil bath heating: 2 x 21.6 kW Motor power, heating chamber circulation fan: 5.5 kW Motor power, pre-chamber circulation fan: 2.2 kW Motor power, oil bath air cooler: 3.0 kW Motor power, lifting table: 11 kW Motor power, loading machine: max. 38 kW Current draw, pre-chamber door: max. 17.2 A Current draw, heating chamber door: max. 13.2 A Motor power, combustion air fan: 1.5 kW Motor power, oil bath pump for oil bath: 2.2 kW Motor power, cooling air blower: 0.75 kW Motor power, oil bath circulation fan: 2 x max. 11 kW Motor power, oil bath pump for cooling plates: 1.1 kW Motor power, batch oil circulation pump: 3 kW Batch dimensions with base grate Height: 950 mm Width: 700 mm Length: 1,600 mm Weight: 1,000 kg Note: The dismantling and loading of the furnace must be organized by the buyer.

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 04493, functionality: fully functional, temperature: 1,100 °C, inner dimension length: 2,000 mm, inner dimension width: 480 mm, inner dimension height: 300 mm, The item is offered as a "Premium Listing" – the sale is qualified and curated by Maschinensucher. Used in accordance with applicable guidelines and maintenance recommendations in a large German corporation. Iijdpozyf Taofx Ahyoh High-performance high-temperature furnace for industrial heat treatment and manufacturing processes. TECHNICAL DETAILS Maximum temperature: 1,100 °C Heating chamber (L × W × H): 2,000 × 480 × 300 mm MACHINE DETAILS Electrical connection: 380 V Fuse rating: 125 A Power: 35 kW Dimensions (L × W × H): 2,500 × 1,000 × 1,700 mm Connection: III EQUIPMENT Mounted on a chassis with rollers CE marking Note: EXW – Buyer is responsible for organizing disassembly and loading.

Condition: used, mileage: 1,600,000 km, power: 349 kW (474.51 HP), first registration: 07/1998, gearing type: mechanical, Equipment: ABS, -Freightliner Classic XL -First registration: 07/01/1998 -Detroit Diesel engine -475 hp -10-speed manual transmission Iiedpfx Ahez Swlqoyoh -Mileage: approx. 1,600,000 kilometers -Drum brakes -Rear axle, air-suspended -ABS -Differential lock -Aluminum rims -11R22.5 tires -Aluminum tanks -2x air-suspension seats -2x sleeper berths -Service / inspection, new -German registration Price: €34,900.00 net More pictures can be found on our website: Errors and prior sale excepted Certified according to ISO 9001: 2015 Every imported truck is converted in our workshop according to EC guidelines, e.g., the braking system. Furthermore, we refine the vehicles according to customer requirements. Examples: Individually manufactured stainless steel parts, interior fittings, trim (leather, fabric), etc. Auxiliary drives and ADR approvals are also possible in our company. If your dream vehicle is not listed, please contact us. We will then import your dream truck (all manufacturers in used or new condition). The prices include: Shipping, customs clearance, conversion according to EC guidelines, German TÜV inspection, emissions test.

Condition: used, axle configuration: 2 axles, first registration: 01/2004, Year of construction: 2004, -Great Dane refrigerated semi-trailer, 2-axle -Year of manufacture: 2004 -Refurbished in 2026 -Chassis, new -Braking system according to EC standard, new Iijdpjz S Spqefx Ahysh -Tires and rims, new -Axles, new -Steerable axle -Air suspension -Drum brake -LED lights and electrical system, new -Length approx. 10.70 m -German registration -TÜV (technical inspection), new Price: 75,000.00 € net More pictures can be found on our website: Errors and prior sale excepted. Certified according to ISO 9001: 2015 Every imported truck is converted in our workshop according to EC guidelines, e.g., the braking system. In addition, we customize the vehicles according to customer requirements. Examples: Individually manufactured stainless steel parts, interior fittings, linings (leather, fabric), etc. Auxiliary drive and ADR approvals are also possible in our company. If your dream vehicle is not listed, please contact us. We will then import your dream truck (all manufacturers, used or new). The prices include: Shipping, customs clearance, conversion according to EC guidelines, German TÜV inspection, emissions test.

Condition: used, axle configuration: 2 axles, first registration: 01/2004, Year of construction: 2004, -Great Dane refrigerated semi-trailer, 2-axle -Year of manufacture: 2004 -Refurbishment: 2026 -Chassis, new -Braking system according to EC standard, new -Tires and rims, new -Axles, new -Steering axle -Air suspension -Drum brake -LED lights and electrical system, new -Length approx. 10.70 m -German registration -TÜV (technical inspection), new Iisdpfez S Spkex Ahyeh Price: 75,000.00 EUR net More images can be found on our website: Errors and prior sale excepted Certified according to ISO 9001: 2015 Each imported truck is converted in our workshop according to EC guidelines, e.g. the braking system. Furthermore, we customize the vehicles according to customer requirements. Examples: Individually manufactured stainless steel parts, interior fittings, cladding (leather, fabric), etc. Auxiliary drive and ADR approvals are also possible in our workshop. If your dream vehicle is not listed, please contact us. We will then import your dream truck (all manufacturers, used or new). The prices include: Shipping, customs clearance, conversion according to EC guidelines, German TÜV inspection, emissions test

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. Isdpfx Ahozgci Esyoih The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, axle configuration: 3 axles, first registration: 06/2022, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Body: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members, 140 mm high, reinforced design for high ground load. Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, made of galvanized steel up to the support structure (semitrailer construction, max. 39,000 kg). Axles and Suspension: Disc brake 22.5". Jost (DCA) axle assemblies, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard information center, electronic brake wear indicator (BWI) readable in the central control unit (CCU) (display), 1st axle with starting aid (new EC regulation, without CCU option). Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, approximately 50-60% tread, on steel rims, silver, 11.75x22.5, offset 120. Kingpin: 2" kingpin bolted into a 10 mm thick plate. Iodez S St Nepfx Ahyeih Landing Gear: Mechanical landing gear with two speeds, 2x 20 tons support load with pivoting foot. Braking System: According to EC standards, EBS E system Wabco with RSS (Roll Stability Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EC standards 91/633 and 97/28 with 2 five-chamber lights, Aspöck Europoint 3 type, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-shaped protection. Body/Container: Body completely welded on the inside, reinforced side walls. Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum container, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belt. Plank profiles completely welded on the inside. Floor as a sliding floor system laid on 140 mm ALU cross members. Floor load approximately 9 tons/m2. Cross members mounted relatively close together (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3 mm thick, in a straight design. Special ALU corner profiles in a beveled design. Smooth rear wall in a straight design with 2 ALU wing doors, 50/30 mm thick, with 2 swivel rod locks, mounted in a welded ALU rear frame with Teflon and stainless steel bearings. Doors secured in the open position with one chain each on the side. Moving discharge wall with Kevlar cover, approx. 1,800 mm long, plus side Kevlar seal. Hydraulic System: "Cargo - Floor" Sliding Floor System Sliding floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders, plus anti-lifting glide bearings, type CF, 10 mm floor design. Hydraulics with approx. 200 mm working stroke. Fixed stops on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed stops. Line size NW 21. Fixed stops with a size and design to be specified. Operating pressure 190-max. 240 bar. ALU end pieces welded into the sliding floor. Electrical operation at the rear left with remote control integrated in a lockable, waterproof box. Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU wheel chock, side ALU impact protection in a folding design, 1 toolbox approx. 860x460x400 mm in p

Condition: like new (used), Year of construction: 2015, functionality: fully functional, The Wilden Saniflo™ Series pump line is specifically designed to meet the strict guidelines established for sanitary process applications. Saniflo™ pumps incorporate a straight flow-through design, large solids passage and efficiencies to insure process success. Saniflo™ pumps have a shear sensitive operation, Tri-clamp® style fittings and are offered in various surface finishes. The Saniflo™ pump line also offers pumps that are CIP (clean in place) and COP (clean out of place) for ease of use and maintenance. The pumps are now available with the Pro-Flo Shift air distribution systems! For sale is the American-made Wilden high-performance diaphragm pump shown in the picture. Food industry (pharmaceutical industry) certified with 3' output and input clamp connector. Iedpfx Ahsuwqiveyjih It was only tested once, otherwise completely new. Air (pneumatic operation) acid and alkali resistant inner and completely stainless housing. It can also pump large particle sizes. Similar pump: wildenstore.psgdover.com/products/aodd-pumps/item-15-12676-wilde -n-3inch-stainless-steel-pro-flo-shift/ New price: about 17000 USD.

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 10/2026, fuel type: diesel, color: silver, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 4,051 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, * Exhaust system, EU6e (EC) * Front-wheel drive * 8-speed automatic transmission * 4-cylinder turbo diesel engine, 2.0 l / 130 kW (4V) BIT * Start-stop system with brake energy recuperation * Towing eye, front * Preparation for trailer hitch * Fuel tank, 75 l * Approved as 3.5t * Front axle, reinforced * Load capacity, in black * Immobilizer, electronic * Air conditioning 'Climatronic' in the cab * Daytime running lights with automatic driving lights and coming/leaving home function * LED main headlights with LED daytime running lights * LED interior lighting concept in passenger/cargo compartment * Fog lights incl. cornering light * Side marker lights * Headlight cleaning system * Windshield washer fluid level indicator, heated windshield washer nozzles * Step lighting * Exterior mirrors, electrically adjustable, heated, and foldable * Exterior mirrors, left and right, convex, with integrated LED turn signal and wide-angle view * Grab handles at the rear pillars * Rear wing doors with increased opening angle * Windshield wiper intermittent function with light and rain sensor * Sliding door, right * Laminated windshield with heat-insulating glazing, heated * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots, and reading light * Sun visors, foldable and swiveling to the side Isdpfszmla Tex Ahyjih * Electronic parking brake * Premium interior noise damping measures * Glove compartment with lockable flap, illuminated * Leather multi-function steering wheel, heated with Tiptronic * 12V socket, cup holders * Three-point automatic safety belts with height adjustment * 12V socket in the cab (in the instrument panel) * Seat belt warning, E-contact in the seat belt buckle * 2 remote control keys * Keyless Go * Auxiliary water heater, with remote control * Chrome package * Suspension seat 'ergoActive', left * Suspension seat 'ergoActive', right * Seat covers in fabric 'Toronto Grid' * Heated driver and front passenger seats, separately adjustable * Instrument panel * Digital instrument cluster * Tire pressure monitoring system * USB Type-C data and charging ports with increased charging performance * 4 loudspeakers: 2 tweeters, 2 woofers * Digital radio reception (DAB+) * MAN Media Van Navigation Business Package (12.9 inch) * MAN SmartLink * MAN Connect * Comfort telephony with LTE and wireless charging * With voice control * Hill start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip regulation (ASR), and ABS * Parking assist, front and rear * ACC Stop & Go * Traffic sign recognition * Rear view camera system with dynamic guidelines * High beam assist 'Light Assist' * Attention and fatigue detection * Lane change assist * Side wind assist * Blind spot warning on both sides and exit warning * Turning assist * Emergency assist (active lane keeping assist, emergency assist, and traffic jam assist) Intelligent speed assist * With multi-function camera * Cruise Assist Plus * Grab handle on the bulkhead in the cargo area * Lashing eyes for load securing * Distribution package, driver assistance systems * Light & Visibility Package * Comfort Package Plus * Oyster Silver Metallic * Country cluster 'WLTP EU approval' * Preparation for alcohol interlock * Full N1 approval (up to and including 3.5 t GVWR) Conversion service for panel van commercial vehicles possible: e.g., retrofitting trailer hitch 990.00 EUR, trailer load increase 714.00 EUR, front bull

Condition: used, Thermo Fisher Type: ARL easySpark metal analyzer Analysis: Tabletop spectrometer with PC, monitor, and software Thermo Scientific OXSAS 2.7 Software OXSAS is the most advanced software for optical emission spectrometers. Current analyses are displayed in tabs. Immediate processing of data sets using fill-down and increment-down tools. OXSAS is a multi-processing application with amazing capabilities and potential. The comprehensive functionality of OXSAS enables you to meet all your requirements. Technical machine description: Condition: fully functional In new condition Year of manufacture: Technical description of the system: The ARL easySpark metal analyzer is designed to meet the challenges and requirements of small to medium-sized facilities and laboratories in the metal industry that require high-quality, but cost-effective OES analysis for the production of parts for the automotive, aerospace, consumer goods, and other industries. The device is characterized by particularly high resolution thanks to a unique optical system based on a multi-grating/CCD (charge-coupled device) system. Other advantages of the Thermo Scientific ARL easySpark analyzer include: The ability to accurately analyze all elements, from trace amounts to percentages, in all metallic solid samples. A groundbreaking spark excitation and optical design to ensure the best performance in its class. An intuitive, user-friendly Thermo Scientific OXSAS analysis software for a quick learning curve and easy routine operation. A robust and reliable design that requires minimal maintenance. Compliance with safety and quality guidelines. A simple design that is suitable for both new users in production and experienced laboratory personnel. The device is also ideally suited for other areas, such as metal recycling, academic and non-academic laboratories, and primary metal producers, where a cost-effective solution is needed for the analysis of metal products and materials for quality assurance and process control, or a second device is required. Power connection: 110-230 VAC, 50Hz or 60Hz Max. power: 600 VA Dimensions: Approx. L x H x D 0.80m x 0.45m x 0.70m Weight: Approx. 80 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone. Iisdpfxeziar Ns Ahysh

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 10/2026, fuel type: diesel, color: black, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, loading space length: 3,201 mm, loading space width: 1,832 mm, loading space height: 1,726 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * Hill start assist * Exhaust system, EU6e (EC) * Preparation for trailer hitch * Towing eye at the front * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots and reading light * Sun visors, foldable and swiveling sideways * Exterior mirrors, electrically adjustable, heated and foldable * Left exterior mirror, convex, with LED turn signal and wide-angle view * Right exterior mirror, convex, with LED turn signal and wide-angle view Isdszc Dhcopfx Ahyoih * All-wheel drive 4x4 * Emergency brake assist (Front Assist) * Battery 520 A (92 Ah) * Rubber floor in the cab * Electronic parking brake * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Operating voltage 12 V * Stone chip protection (without CO2 optimization) * H2 - Normal roof * Differential lock on the rear axle (manually switchable, mechanical) * Immobilizer, electronic * Parking assistance system (PDC) front and rear * Entry handles on the rear pillars * USB Type-C data and charging ports with increased charging power * Daytime running lights with automatic driving lights and coming/leaving home function * Electrical connection block and KFG (vehicle-specific wiring harness) * Premium interior noise damping measures * With UNECE CS&SU (Cyber Security and Software Updates) * 4-cylinder diesel engine 2.0L, assembly 03N.G * Automatic Distance Control (ACC) * 8-speed automatic transmission 4x4 * Glove compartment with lockable lid, illuminated * Entry handle on the partition in the cargo area * Automatic climate control "Climatronic" in the cab * LED headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo area * Anti-glare interior mirror * Traffic sign recognition * Rear view camera system with dynamic guidelines * High beam assistant "Light Assist" * Leather multi-function steering wheel, heated, with Tiptronic * 4 speakers: 2 tweeters, 2 woofers * Country cluster "WLTP EU approval" * Digital instrument cluster * Driver alertness and fatigue detection with driver monitoring camera * MAN SmartLink * 130 kW (LD) * Fog lights incl. cornering lights * MAN Connect services incl. emergency call service * 12 V socket, cupholder * Tire pressure monitoring system * L3 - Standard * Three-point automatic seat belts with height adjustment * Rear wing doors with 270-degree opening angle * Heat-insulating glazing * 12 V socket in the cab (in the instrument panel) * Suspension seat "ergoActive" left * Suspension seat "ergoActive" right * Seat belt warning, front * Seat covers in "Toronto Grid" fabric * Seat heating for driver and front passenger, separately adjustable * Side marker lights * 2 remote control keys * Approval as 3.5t * Start-stop system with brake energy recovery * Lane change assist (Side Assist) * Side wind assist * Headlight cleaning system, washer fluid level indicator, heated windshield washer nozzles * Windshield wiper interval control with light and rain sensor * Special purpose vehicle (LNFZ) design with up to 3 seats * Keyless Go * Sliding door, right * Turning warning on both sides and drive-off warning * Turn assist braking function * Emergency assist incl. travel assist and lane assist * Preparation for alcohol interlock * Speed limiter with predictive control * Multi-function front camera * Partition * Step illumination * Digital radio reception (DAB+) * Front axle, reinforced * Comfort telephony with LTE and wireless charging

Condition: like new (used), GIF Kitchen Ventilation Ceiling Ventilation Ceiling System The optimal solution for kitchen ventilation, commercial kitchens, and the food industry. The best alternative to extractor hoods Iiedpfxot Hglko Ahyeh GIF kitchen ventilation ceilings are installed in: • Company canteens • Hospitals, clinics • Restaurants / hotels • Retirement homes, homes for the disabled, and children • Military accommodations, field kitchens • University cafeterias, school kitchens • In-flight catering • Correctional facilities • Public facilities Patented quality – Made in Germany The GIF kitchen ventilation ceiling is a complete, wall-to-wall, surface-active solution including large-area exhaust and supply air panels, lighting, and compensation surfaces with an installation height of just 200 mm. The use of the ceiling cavity as a pressure chamber in accordance with VDI 2052 enables implementation as an "open" or "closed" system, always maintaining the largest possible proportion of air-active surfaces. The large-scale capture of frying, cooking, and other fumes, as well as the large-scale, low-turbulence supply air intake, guarantee a comfortable climate free from condensation and drafts. The unique modular system offers maximum transparency and hygiene thanks to its fully reversible design. The unique modular system offers maximum transparency and hygiene thanks to its fully reversible design. On the supply air side, the GIF active cassette ceiling is used for low-turbulence, large-scale supply air intake according to the stratified flow principle. An energy-efficient solution is thus standard. The special design ensures indirect supply air guidance, even for high air volumes at low inlet velocities, without an induction pulse. Since the active cassettes are identical in the exhaust and supply air areas, they can be interchanged at will. Facts and Benefits Complies with or exceeds current guidelines (VDI 2052, VDI 6022, EN 16282), including accessibility to underlying components (no access openings required). Durability of the material: CNS 1.4301 Integrated deflection system for rapid pulse reduction Economical and hygienic cleaning of only 4 parts per m² in the dishwasher Pulling and pushing of the active cassettes in the support profiles makes them easy for anyone to remove without tools Partial cleaning possible as needed No need to climb onto greasy, hot kitchen appliances (risk of slipping) HACCP-certified process Technical Specifications Exhaust Air Air flow rate: 260-300 m³/h m² Separation efficiency: up to 97% Dimensions: 500×485 mm Pressure drop: 20-25 Pa Material/Surface: CNS Material No. 1.4301 Weight per m2 without support structure: 10.00 kg Draft air flow: 360-500 m3/h m2 Dimensions: 500×485 mm Pressure drop: 25-30 Pa Material/Surface: CNS material No. 1.4301 Weight per m2 without support structure 10.00 kg Airflow velocities: less than 0.2 m/s Ceiling area: 6500 x 3000 mm 19.50 m² 300 supply air flat ceilings, 250 x 485 mm 200 supply air flat ceilings with sound absorption, 250 x 485 mm 220 active cassette ceilings, 500 x 485 mm 14 system support profiles, 6500 mm 7 system support profiles, 2000 mm Lighting fixtures installed flush with the ceiling in the GIF ventilated ceiling Financing through our bank is also possible. komplett-konzept.leasingo.de Further items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: used, mileage: 6,200 km, power: 115 kW (156.36 HP), first registration: 11/2025, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2027, color: white, gearing type: automatic, number of seats: 3, loading space length: 2,900 mm, loading space width: 2,100 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Subframe: Stable, lightweight aluminum construction. Longitudinal and transverse beams made of aluminum. Subframe connected to the chassis according to the truck manufacturer's guidelines. External frame with lashing points. Floor: Consisting of 18 mm thick vehicle construction panels, with a film coating on the underside to prevent moisture penetration, and a non-slip screen-printed texture on the top. The panels are laid flat and sealed around the perimeter. Front wall: Closed with corner posts extending to under the roof, filled with aluminum hollow profiles. Side walls: Ijdjzhdk Topfx Ahyjih Equipped with a PentaWave sliding tarp system, which is supported both at the top and bottom in specially shaped profiles. The sliding rollers inside allow the side walls to be moved effortlessly. These can be easily and quickly closed using the integrated tensioning system. Rear wall: Open, prepared for the installation of rear doors (see special versions!). Roof: Fixed roof, consisting of clamped crossbars in a 400 mm grid, with a tarp above. Impact protection: Aluminum strip attached to both sides to guide the Penta-Wave system. Accessories: 1 set of mudguards including mud flaps Holder for wheel chocks Red position lights above the rear portal on the left and right, as LEDs 3rd brake light in the center above the rear portal doors, as an LED Contour marking according to ECR R48, white on the sides and red at the rear, strip width 55 mm Load securing with KIM system 3 rows of Ancra Jungfalk with TRS locking bars KIM 5 x 7 cm (ceiling-guided) with horizontal spring telescopic rods 3 additional locking bars KIM 5 x 7 cm (without ceiling guidance). Mounting of barrier bars to the additional locking bars on the right and left made of aluminum square tube for load securing in the longitudinal direction. Interior lighting 1 LED light strip, centered in the body, including connection to the driver's cab switch. Two-wing rear door Made of aluminum sandwich panels with internal rotary latch closures. The doors have a smooth surface (optimal for lettering). Drop-down brackets for hole rows in the outer frame 4 pieces per side, mounted with a flap and stop nut (more can be installed upon customer request). Side impact protection Side flank protection, brackets galvanized and foldable, planks anodized. Rear view camera Rear view camera including connection to the monitor or navigation system installed by the truck manufacturer. If you have any questions about this vehicle, please contact Mr. Markus Müller:

Condition: used, mileage: 6,200 km, power: 115 kW (156.36 HP), first registration: 11/2025, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2027, color: white, gearing type: automatic, number of seats: 3, loading space length: 2,900 mm, loading space width: 2,100 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Subframe: Stable, lightweight aluminum construction. Longitudinal and transverse beams made of aluminum. Subframe connected to the chassis according to the truck manufacturer's guidelines. External frame with lashing points. Floor: Consisting of 18 mm thick vehicle construction panels, with a film coating on the underside to prevent moisture penetration, and a non-slip screen-printed texture on the top. The panels are laid flat and sealed around the perimeter. Front wall: Closed with corner posts extending to under the roof, filled with aluminum hollow profiles. Side walls: Equipped with a PentaWave sliding tarp system, which is supported both at the top and bottom in specially shaped profiles. The sliding rollers inside allow the side walls to be moved effortlessly. These can be easily and quickly closed using the integrated tensioning system. Rear wall: Open, prepared for the installation of rear doors (see special versions!). Roof: Fixed roof, consisting of clamped crossbars in a 400 mm grid, with a tarp above. Impact protection: Aluminum strip attached to both sides to guide the Penta-Wave system. Accessories: 1 set of mudguards including mud flaps Holder for wheel chocks Red position lights above the rear portal on the left and right, as LEDs 3rd brake light in the center above the rear portal doors, as an LED Contour marking according to ECR R48, white on the sides and red at the rear, strip width 55 mm Load securing with KIM system 3 rows of Ancra Jungfalk with TRS locking bars KIM 5 x 7 cm (ceiling-guided) with horizontal spring telescopic rods 3 additional locking bars KIM 5 x 7 cm (without ceiling guidance). Mounting of barrier bars to the additional locking bars on the right and left made of aluminum square tube for load securing in the longitudinal direction. Interior lighting 1 LED light strip, centered in the body, including connection to the driver's cab switch. Two-wing rear door Made of aluminum sandwich panels with internal rotary latch closures. The doors have a smooth surface (optimal for lettering). Iodpezhdldefx Ahyoih Drop-down brackets for hole rows in the outer frame 4 pieces per side, mounted with a flap and stop nut (more can be installed upon customer request). Side impact protection Side flank protection, brackets galvanized and foldable, planks anodized. Rear view camera Rear view camera including connection to the monitor or navigation system installed by the truck manufacturer. If you have any questions about this vehicle, please contact Mr. Markus Müller:

Condition: used, Technical Commercial Datasheet – Integrated KAESER CSDX 165 T Air Compressor Station Manufacturer KAESER KOMPRESSOREN (Coburg, Germany) Type Complete "All-in-One" industrial compressed air station, featuring a fluid-injected rotary screw air compressor with variable speed control (CSDX Series), an integrated refrigeration air dryer (Module T), and an advanced SIGMA CONTROL 2 electronic monitoring configuration. Industrial Applications Continuous, high-efficiency plant air generation for automated manufacturing facilities, heavy assembly lines, packaging plants, plastics processing, and automotive industries. The variable speed drive system matches actual compressed air consumption in real time, eliminating peak starting currents and optimizing plant energy performance. Key Technical Specifications * Main Compressor Unit: KAESER CSDX 165 T (CSDX Series / Integrated Dryer Version) - Technology: Fluid-injected rotary screw compressor featuring premium SIGMA Profile rotors - Regulation System: Variable speed control via an integrated frequency inverter (SFC / Sigma Frequency Control) - Nominal Motor Power: 90 kW - Air Flow Range: Dynamic adjustment based on plant load profile (up to approximately 16.15 m3/min maximum capacity) - Maximum Working Pressure: 8.5 bar max (Current digital setpoint displayed: 7.5 bar) - Integrated Air Dryer (Module T): Refrigeration air dryer utilizing eco-friendly R-513A refrigerant (2.6 kg charge), with a maximum pressure of 32 bar on the cooling circuit side. - Electrical Requirements: 400 Volts / 3-Phase / 50 Hz - Control Interface (SIGMA CONTROL 2): - Total running hours: 26,805 h - Hours under load: 15,272 h Iijdpezcaufofx Ahyeh - Current system pressure: 0.00 bar (at standstill) / Internal package temperature: 24 °C Machine Utilization This KAESER CSDX 165 T workstation draws ambient atmospheric air and compresses it through its high-efficiency 90 kW fluid-injected screw airend. The frequency inverter continuously regulates the engine speed to prevent the unit from wasting power during low-demand windows. Saturated, hot compressed air exiting the screw block is directed straight into the built-in refrigeration dryer module (Module T). The dryer chills the air stream down to its pressure dew point, condensing and safely discharging moisture to deliver clean, dry, and precisely regulated air to the factory floor line. System Highlights * Compact All-in-One Workstation Footprint: By enclosing the compressor and the refrigeration dryer unit inside a single acoustically insulated cabinet, the station significantly reduces necessary floor space, transport overhead, and engineering installation costs. - SFC Variable Speed Energy Efficiency: The dynamic matching of motor output to actual pneumatic network demand ensures a highly optimized electrical power factor and an exceptionally competitive cost per cubic meter of air. - Intelligent SIGMA CONTROL 2 Management: This interface monitors all critical operating metrics (pressions, temperatures, and maintenance schedules), ensures advanced industrial network compatibility, and confirms a healthy machine history with low un-loaded idling hours (only 43% idle time relative to total run metrics). - Future-Proof Eco-Refrigerant: The integration of R-513A refrigerant meets strict international F-Gas environmental guidelines, securing the long-term operational legality of the cooling loop without risks of sudden regulatory phase-outs.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, load capacity: 200 kg, lifting height: 8,000 mm, Vertical Mast Work Platform with Jib JLG Model: TOUCAN 10E Year of manufacture: 2011 Load capacity: 200 kg Platform dimensions: approx. 0.9 x 0.70 m Transport dimensions: approx. 2.82 x 0.99 x 1.99 m Weight: approx. 2990 kg Working height: approx. 10.10 m Platform height: approx. 8.10 m Outreach: approx. 3.36 m Drivable up to a working height of 10 m UVV (safety inspection) new Shipping is not a problem. Machine location: 94244 Teisnach (See images for current condition.) Prior inspection is expressly encouraged; simply leave your phone number via email and I will get back to you to arrange a viewing appointment. Subject to prior sale. All information is given without guarantee. Iisdpfjyvyb Hsx Ahyoh Machines can be collected by the buyer or shipped by freight carrier at the buyer's expense. Loading and packaging can be organized by us. The indicated shipping costs are guidelines; actual costs may vary according to distance and unloading capability—please inquire. The specified sales price is the gross final price including VAT. An invoice with VAT shown will be issued. Warranty Basis: Due to age and wear, the sale is exclusively to commercial buyers without any warranty, guarantee, or return right. All information without guarantee. The buyer accepts this upon placing a bid. If the item offered is used, the warranty is 12 months if the buyer is a consumer under §13 BGB. If the buyer is an entrepreneur under §14 BGB, any warranty is excluded. If the item offered is new, the warranty is 24 months if the buyer is a consumer under §13 BGB. If the buyer is an entrepreneur under §14 BGB, the warranty is 12 months.