Used Amtec Blister Machine for sale (64,569)

Year of construction: 2022, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 22015404-1, The blister packaging machine is in very good condition and is fully operational and functional. A test run of the machine and inspection of its operation are possible. The machine has been regularly maintained and serviced. Upon sale, all available additional spare parts and replacement components will be included. Podpeyuc Hzofx Aahopu In addition to the blister packaging machine, the package also includes the following components that were additionally ordered alongside the basic machine. Camera inspection system for blister monitoring, a machine for secondary packaging of blisters SDZ-100, and a chiller for cooling the film from which the blisters are thermoformed. You can produce blister "0" 120x70x15 and blister "00" 120x70x30. All machines are supplied with the relevant technical documentation and CE certificates. All technical specifications, dimensions, the machine layout, as well as catalogs and instructions can be found in the attached PDF files.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Used heat-sealing machine for medical blister, make: MEDIPACKER, model: TS 3535, Serial number: 635-231; MFG: September 2018, dimensions: Width 470 mm X Depth with guide bars 710 mm X Height 660 mm, net weight 112 kg without tools, seal surface 350 x 350 mm Max., depth of Blister 105 mm; The used heat-sealing machine is sold with the mould (please check the pictures); The filled blister packs are placed on the support plate. The die-cut lid is placed on the blister pack; positioning is using pins. The carriage is pushed to its rearmost stop. The sealing cycle is initiated automatically. After the sealing cycle, the carriage is pulled back again. With its compact and durable design, this table model has been specially developed for the medical industry and use in clean room areas. The three process parameters— Time, Pressure, and Temperature—are regulated to the tightest tolerances, resulting in a high-quality package. Rust-free INOX construction with aluminium parts anodized. The sealing temperature is digitally programmable up to max. 190 °C feedback control accuracy at 130 °C = ± 1.0 °C measured at the hotplate PID feedback control system. The sealing force is programmable via touch screen from 6 kN to 36 kN, adjustable in 1 kN steps, repetition accuracy within 0.5 kN. Pjdpjvubapefx Aahopu The sealing time is programmable from approximately 1.0 to 9.9 seconds. The program is adjustable by 0.1 seconds each. The repetition accuracy is better than 0.15s. Output approx. 12 Cycles/Minute, without placing and removal of trays compressed air connection 0,6 Mpa/6 bar, tube outside 12 mm, tube length 3 m. The compressed air must be supplied filtered and dry. The consumption of compressed air per cycle at 16,5 NL to 0,5 MPa; The electrical connection is 230 VPNE 50/60 Hz, max. 2300 VA; 3 x 400 V, 50 Hz, max. 4100 VA Sealing lid from a film roll For Romanian companies, finance leasing or credit in instalments is possible, with a minimum of 50% down payment. Price 6,500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Technical Data Blister Module (B 1770) Max. Output 700 blisters/min Application area Solid products Max. format range [Feed x Width] 200 x 284 mm Cartoning Module (C 2305/C 2504) Max. Output 300 or 500 folding cartons/min Application area Blisters Max. folding carton size [A x B x H] 105 x 105 x 155 mm or 80 x 90 x 155 mm See PDF for details. Ppodpfsv D Ipisx Aahsu

Condition: like new (used), Year of construction: 2016, ANCIMO AC-60 CL AUTOMATIC BUBBLE PACK THERMOFORMING AND SEALING MACHINE Manufacturer: ANCIMO Model: AC-60 CL Year of manufacture: 2016 Condition: Excellent. Very few operating hours. Complete documentation available. GENERAL DESCRIPTION Automatic machine for the production of blister packs through thermoforming, filling, and sealing, designed to work with a wide variety of materials such as PVC, PVDC, polyethylene, aluminum, and laminated materials. The system allows for cavity formation through thermoforming, as well as subsequent sealing with upper materials such as aluminum, cardboard, or plastic film, resulting in a high-quality and attractive finished package. The machine is in excellent condition and has complete technical documentation. TECHNICAL SPECIFICATIONS • Thermoforming area: 400 x 200 mm • Heat sealing area: 400 x 200 mm • Installed power: 21 kW • Electrical power supply: 380 V III + N • Approximate dimensions: 7,400 x 963 x 1,900 mm COMPATIBLE MATERIALS • PVC • PVDC • Polyethylene (PE) • Aluminum • Cardboard • Laminated materials and other thermoformable materials EQUIPMENT INCLUDED • Automatic thermoforming unit • Heat sealing system • Trimming unit for individual blisters • Unwinder / film feeder • Rewinder for collecting trims and waste • Coil handling trolley • Coil loading trolley • Format changeover trolley DOCUMENTATION • Original manuals Ppodpozcftgjfx Aahou • CE marking • Electrical diagrams • Pneumatic diagrams ADVANTAGES • European manufacturing • Year 2016 • Very few operating hours • Excellent overall condition • Wide range of compatible materials • Format changes using a dedicated trolley • Available for immediate inspection

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 616, type of input current: AC, input voltage: 240 V, compressed air connection: 6 bar, film width: 480 mm, input current: 16 A, For sale is an ILLIG HSA 50 C blister packing machine, year of manufacture 1991. This is a high-performance automatic inline blister sealer with card feeder, suitable for film thicknesses from 150 µm to 400 µm (possibly higher, but not personally tested). The complete line is being offered (see pictures). Speed: 1–9 cycles/minute with 4-up production. Example: air freshener, 4 units per blister palette = 2000 blisters/hour. Approximate dimensions: 9m x 1m x 2.25m. Sealing plate size: 57x32cm. The machine is 100% functional and is still in operation. Inspection and trial run before purchase are possible. Location: Czech Republic (10 minutes past the Bavarian/Czech border at Furth im Wald). Ppjdpsy Anifefx Aaheu

Condition: like new (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, 🔧 Multivac Semi-Automated Blister Packaging Line (2021 – Unused) Complete Medical Device Packaging System – Fully Stainless Steel Available now at Used Machine Tools Ireland Ltd, this Multivac semi-automated packaging line is in as-new condition, originally installed in 2021 at a medical device facility but never used. This is a high-spec, turnkey blister packaging solution, ideal for medical, pharmaceutical, food and high-spec manufacturing environments requiring cleanroom-compatible, stainless steel equipment. This Multivac semi-automated blister packaging line (2021) includes dual T700 tray sealers, MR625 labelling system, robotic handling modules, inspection stations, and full conveyor system, designed for medical-grade blister packaging in stainless steel environments. Suitable for 150–180mm blister packs with double sealing process. 🚀 Key Highlights ✔️ As new – never used (2021 installation) ✔️ Full stainless steel construction – medical grade ✔️ Complete automated blister packaging line ✔️ Dual Multivac T700 tray sealers ✔️ Integrated labelling, inspection & robotic handling ✔️ Designed for precision medical device packaging ✔️ Includes large quantity of spare parts & tooling ⚙️ Packaging Process Overview This line is designed for high-efficiency double blister packaging: 4-place carrier tray automatically loaded with empty blister packs Manual filling of blister packs with product Tray moves to Multivac T700 Sealer #1 Automatic sealing + labelling via Multivac MR625 Cross Web Labeller Small blister packs are automatically transferred into larger blister packs (double pack) using a Multivac H242 Robotic Handler (double pack) Packs placed into 2-place carrier tray Tray moves to Multivac T700 Sealer #2 for final sealing Finished trays move to manual unloading & boxing stations via a Multivac H242 Robotic Handler Three inspection stages ensure quality control 📦 Product Size Capability Blister Pack Sizes: 150 x 150 x 70mm 180 x 180 x 80mm 🏭 Full Equipment List 🔹 Multivac Equipment 2 x Multivac T700 Automatic Tray Sealers High-performance automatic tray sealing system 1 x Multivac MR625 / MR6318 Cross Web Labeller Fully automatic cross web labelling 2 x Multivac H242 Robotic Handling Modules Automated product transfer High-speed pick & place functionality Designed for integration with packaging lines 2 x Multivac MTD351 Tray Denesters Automatic tray separation and feeding Reliable high-speed tray handling 🔹 ASYS Tecton Automation Equipment 2 x ASYS Tecton Tray Stackers 1 x Horizontal Tray Stacker (6 x 5 carriers) 1 x Horizontal Tray Stacker (4 x 5 carriers) 3 x ASYS Tecton Inspection Stations 🔹 Additional Equipment 23 x Conveyor Sections (various lengths) Multiple HMI Control Panels throughout line 13 x Stainless Steel Handling Trolleys Extensive spare parts package included 💡 Typical Applications Medical device blister packaging Pharmaceutical packaging lines Cleanroom packaging systems Double blister / sterile barrier packaging High-spec manufacturing environments 📦 Condition Installed 2021 Never used – as new condition Fully maintained & preserved Now dismantled - videos of line in operation are available Note: Specifications and information provided in each listing are supplied in good faith; however, their accuracy cannot be guaranteed. Ppodpfxeyzf Uce Aaheu Some tables in the videos/photos are not included No printers are included

Condition: used, functionality: fully functional, Reportedly very little used IMA model TR 135 medium speed blister packaging machine. - Manufacturer: IMA - Model: TR 135 - Forming capacity: max 90 cycles/min - Cutting capacity: max 230 cycles/min - Control system: Color touch screen - Feeding system: Pre-feeder hopper with capacity 45 litre + bowl with vibrator - Power supply: 400 V, 50 Hz (max power 12 kW, average power 7 kW) - Air supply: 700 Nl/min, 6 - 8.5 bar Ppedpfxjy Slchj Aahsu - Cooling device: Chiller Euro cold ACW-LP 16T Blisters: - Blister: PVC/ALU blisters. - Size range: Width 30 - 88 mm x Lenght 60 - 135 mm x Thickness 3 - 12 mm - Available parts: Possible to supply with IMA A83 horizontal cartoning machine

Year of construction: 2022, condition: new, machine/vehicle number: AM00222071301-01-01, Manufacturer:AUTOVAK Model: M320 Main material:Stainless steel Dimensions:3,550 mm x 1,050 mm x 2,300 mm Weight: ca. 1,200 kg Power supply: 3 x 400 V + N + E / 50/60 Hz Compressed air supply: Pressure min. 6 bar, 500 L/min (without printer) Width of top web:305 - 310 mm Roll core diameter: 3" Roll diameter: 400 mm Width of bottom film:322 +/- 1 mm Roll core diameter: 3" Roll diameter: 300 mm Cutting size: 130 x 100 mm Forming depth:15 mm Loading area length:450 mm Installed power: 15 kW Noise level:Less than 72dB Production speed: 3 ~ 10 cycles/min Equipment: Forming tool for 3 blisters per stroke each with opening aid at one corner; Inner dimensions: 105 mm x 75 mm x 15 mm Podpfx Aopfcd Asahspu Condition: Like new (demo model)

Condition: ready for operation (used), Year of construction: 2004, An Illig slide blister machine is available. Blister length range: 110mm-500mm, blister width range: 50mm-280mm, max. blister depth: 80mm, fold-over edge. An on-site inspection is possible. Pedpfsyyplcox Aahopu

Condition: ready for operation (used), Table diameter: 1000mm, tool height: 80mm, sealing pressure: 1.6t, number of stations: 4, connected load: 3kW, including tools, machine was hardly used. Ppsdpfxjif Elgs Aaheu

Condition: defective spare-parts repository (used), Manufacturer: Illig Type: HSA 50C The machine is incomplete and not operational! For spare parts only!! Psdeuk Dwfopfx Aahepu

Condition: good (used), Manufacture: ALLOYD Pjdpsuhn Dijfx Aahjpu Tip: 4 seec Turntable

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to Podpfxstndpzs Aahepu - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: new, Year of construction: 2025, Economical blister machine with a quick format change unit for more flexibility. Universal feeder for handling of almost all types such as capsules, flat tablets, oval tablets, capsule tablets, triangular tablets or other various shapes. Adjustable sealing pressure for different product requirements. The machine is additionally equipped with a film waste material trimming cutting device which allows production runs of approximately 90 minutes. Integrated camera inspection systems (pinhole detector, BASLER color camera) automatically eject defective blisters and ensure the quality of the blister packs. Two holding devices for two blister film rolls and the integrated blister film splicer increase efficiency during material changeover. The length of the final blister is adjustable by software. Including water chiller system, 1 x aluminum format set with dedicated feeder, aluminum/PVC format set with brush feeder, print mark detection unit. - Specifications: sealing principle: platen sealing; max. format area (index x width): 245 x 152 mm; max. forming depth: 12 mm; processable forming materials: Al, Al/PVC; max. speed of the machine in neutral: 20 cycles/minute; Al/Al 40 cycles/min, Al/PVC 70 cycles/min (corresponds with 57x80 mm Al/PVC blister: 280 blister/min); number of lanes: customized; max. roll diameter forming film: 600 mm; power consumption: 9.6kW; machine dimensions: 4800×740×1700mm; weight: 2200kg. Ppodpfjv Nkvcsx Aahju Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), With acid-resistant section, with high pressure nozzles, equipped with a conveyor Overall Size: 9,5 x 1,15 x 1,9 m Opening size: 530 x 250 mm Chemical tank (heated): 0,5m³ Rinse tank (heated): 0,3 m³ Drying fans: 12db Ppedpet Ity Defx Aahsu Voltage: 380 V

Condition: good (used), Year of construction: 2008, XYZ Compact Turn 52 CNC lathe with barfeeder Year: 2008 Technical details: Bar Capacity 52mm Chuck Size 150mm (6") Control Siemens 810D Shopmill Distance Between Centres 280mm Maximum Cutting Diameter 220mm Maximum Cutting Length 280mm Rapid Feedrates 20m/minute Spindle Motor Power 20Hp Spindle Nose A2-5 Spindle Speed 5000rpm Swing diameter 400mm Swing Over Carriage 400mm Tailstock Quill Diameter 60mm Tailstock Quill Stroke 90mm Tailstock Taper MT4 Tool Size 20 x 20mm Tooling Configuration VDI 30 Turret Positions 12 X axis Travel 185mm Z axis Travel 325mm Machine Dimensions 2531 x 1778 x 1720mm Machine Weight 2590kg Accessories/options: - LNS servo barloader - Foot pedal for chuck operations Podpfx Ajzg Intjahopu - Parts catcher - Renishaw tool setter - Tailstock - VDI 30 tool holders - Swarf conveyor - Documentations Under power in our warehouse, possible to test it anytime!

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm Podsy Nd Sijpfx Aahopu longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: used, XYZ SMX 2000, Year 2017, from research and development facility, tooling and vices in images not included. Prot Trak SMX Control Ppedpfx Aaox Saulshsu

Condition: good (used), Year of construction: 2015, operating hours: 250 h, functionality: fully functional, For Sale: Guideway Grinding Machine (Retrofitted from Metal Planing Machine) We offer a robust guideway grinding machine, which has been professionally converted from an original metal planing machine. The main advantage lies in its relatively compact footprint in relation to the workpiece capacity. Technical Specifications: • External dimensions (LxWxH): 4,800 x 2,500 x 2,000 mm • Required floor space: 4,800 x 3,500 x 2,700 mm (+ control cabinet, coolant tank, access) Ppodpfx Aaoxx Uudohsu • Table size: 2,000 x 800 mm • Distance between columns: 1,000 mm • Travel paths (X/Y/Z): 2,000 / 1,000 / 600 mm Upgrades & Features: • New ball screw spindles and bearings • 2 new motors + 2 overhauled motors • 3 new frequency inverters • New Siemens SINUMERIK 802C baseline CNC system • Large grinding spindle: 2,840 rpm – refurbished + new motor • Small grinding spindle: 18,000 rpm – refurbished • Including control cabinet, coolant tank with pump, and separate, wall-mounted inverter for small spindle Inspection and trial run possible by appointment. Please contact us for more information.

Condition: good (used), GUK FA 49/4 Folding Machine + GUK FA 49/4 Cross Folding Module The machine is in very good technical and visual condition. Format: 490x690mm. Ppsdpfxszfwxle Aahsu Folding speed: 30-160m/min Equipment: 4 parallel cassettes on the main unit 4 perpendicular cassettes on the cross-folding unit First cassette extended. Cassette adjustments are dial-based. Smooth speed control. Counter with batching function and folding speed indicator. Rietschle compressor. Tool roller with a large number of perforating, creasing, and cutting tools. Raised sound insulation covers. Vacuum-assisted feeding Mobile delivery (free standing delivery) with smooth speed control Full documentation. Extensive set of accessories.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Pjdpfx Aajzg D I Aohspu NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, working width: 1,600 mm, installation height: 430 mm, throat depth: 400 mm, operating speed: 50 mm/s, reverse speed: 200 mm/s, back gauge speed R-axis: 200 mm/s, overall weight: 3,500 kg, total length: 2,350 mm, total width: 1,700 mm, total height: 2,220 mm, power: 17.3 kW (23.52 HP), warranty duration: 24 months, Equipment: CE marking, Model: GB-4016E Bending pressure (KN): 400 Bending length (mm): 1600 Distance between columns (mm): 1320 Maximum opening height (mm): 430 Slider stroke (mm): 180 Ppodpfxjwzqx He Aahou Throat depth (mm): 400 X-axis stroke (mm): 400 X-axis speed (mm/s): 400 R-axis stroke (mm): 140 R-axis speed (mm/s): 200 Z-axis stroke (mm): 1040 Z-axis speed (mm/s): 400 Machine power (kw): 17.2 Dimensions (mm): 2090*1265*2290 Weight (kg): 3500

Condition: new, functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Position: Spindle positioning Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Profile: Rectangular, circular, irregular Helix: Spiral ramping Milling: Straight lines along X, Y, or Z axis or any combination Engraving: Text engraving Thread cutting: Thread cutting with tap Thread milling: Thread milling with form cutters Ppodpfswtnxnsx Aahju Copying: Copying a series of cycles Mirror: Mirror image Rotation: Rotation around an axis Repetition: Repetition of a series of cycles G-code editor Clipboard

Condition: new, Year of construction: 2026, -Tfon Leveltech® S-3513 Leveling Machine. -The Tfon Leveltech® S-3513 is a precision leveling machine optimized for ultra-thin materials, combining advanced electromechanical controls with easy operation for consistent, high-quality flattening results. -Key Specifications: Material Thickness: 0 – 0.3 mm. -Maximum Material Width: 1.300 mm Ppjdjkyrzljpfx Aahou Minimum Material Length: 70 mm Quick Change System for Straightening Rollers: Standard. Flattening Gap Adjustment: Electromechanical / PC Controlled. Machine Dimensions (L × W × H): 2,685 × 1,585 × 1,820 mm. Total Weight: 5.000 kg.

Condition: new, Year of construction: 2026, -Tfon Bevel Wizard® Linear. -Precision Beveling for Linear & Non-Linear Applications. Ppodpfx Aajrt Tpnehsu -The TFON Bevel Wizard® Linear is a high-performance beveling solution designed to deliver exceptional accuracy on both straight and contoured sheet edges. Engineered with flexibility at its core, it features an advanced Trace Tracking System that automatically adjusts to variations in material thickness and geometry—ensuring precise and consistent edge processing even for complex parts. -Key Features 🔹 Advanced Trace Tracking System: Intelligently detects and adapts to diverse edge shapes and contours in real time. 🔹 Wide Beveling Range: Adjustable bevel angles from -30° to +80°, ideal for a broad range of applications. - Optimized for Large Workpieces: Capable of processing materials up to 12,000 mm in length and 100 mm in thickness. - Industrial-Grade Durability: Built to last with a solid 10,000 kg frame for long-term reliability. 🔹 Superior Surface Finish: Delivers a high-quality finish with a consistent Emery Band Rotation Speed of 30 m/min and a Ø135 mm contact wheel. -Technical Specifications: Beveling Angle Range: -30° to +80° -Material Thickness: 4 – 100 mm. -Minimum Material Width: 250 mm. Minimum Material Length: 250 mm Maximum Material Length: 12,000 mm Part Feed Speed: 1.5 – 5 m/min Part Completion Speed: 3 meters/day Maximum Part Indentation: Ø400 mm Emery Band Rotation Speed: 30 m/min Contact Wheel Diameter: Ø135 mm. Emery Band Drum Diameter: Ø400 mm. Machine Weight: 10,000 kg Engineered for precision. Built for performance. Designed for industrial excellence Tfon Bevel Wizard® Linear — Where Accuracy Meets Efficiency...