Used Almi Al 1-2 U for sale (117,818)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 5932 € 114.49 € 3/4" 26,9 mm, 1" 33,7 mm, mm 5 mm 3 mm 93 kg The motor driven AL 1-2U can be used to notch pipes with an external diameter of 27.9 mm 26.9 mm (3/4"), 33.7 mm (1"), 42.4 mm (1 1/4"), 48.3 mm (1 1/2") and 60.3 mm (2")and notch pipes with an external diameter of 22 mm to 76 mm for sink outflows. Nodsyui Sqopfx Ahkolf Do you often have to notch pipes? If so, the motor-driven AL1-2U equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 5104 € 98.51 € 3/4" 26,9 mm, 1" 33,7 mm, mm 5 mm 3 mm 87 kg The motor driven AL 1-2E can be used to notch pipes with an external diameter of 26.9 mm (3/4"), 33.7 mm (1"), 42.4 mm (1 1/4"), 48.3 mm (1 1/2") and 60.3 mm (2"). Njdpfx Ahjyui S Rokolf Do you often have to notch pipes? If so, the motor-driven AL1-2E equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.

Condition: good (used), Year of construction: 1998, Offer 24339 Technical data: - Sanding belt dimensions 2000 x 100 mm - Surface sanding opening 400 x 100 mm - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment by hand lever - Sanding belt speed 30 m/sec. - Contact wheel / sanding roll for approx. Ø 42 mm Nedpfot Uzxnjx Ahkslf - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - Contact rollers 33.7 , 42 , 48 mm

Condition: good (used), Year of construction: 1996, Offer 24337 Technical data: - Sanding belt dimensions 2000 x 100 mm - Surface sanding opening 400 x 100 mm - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment by hand lever - Sanding belt speed 30 m/sec. - Contact wheel / sanding roll for approx. Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg Nlodpfx Ajvbfh Rehkof - various contact rollers

Condition: good (used), Year of construction: 1995, Offer 24315 Technical data: - Sanding belt dimensions 2000 x 100 mm - Surface sanding opening 400 x 100 mm - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment via hand wheels - Sanding belt speed 30 m/sec. - Contact wheel / sanding roll Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - 10 contact grinding rollers approx. Ø 10 + 18 + 22 + 24 mm - 28 + 33 + 36 + 48 + 60 + 68 mm Nodpfxet Stfhe Ahkelf

Condition: new, neu ca. 2 Wochen ab Auftragse Niederlande 4785 € 100 x 2.000 mm 20 - 76,1 mm 1 1 3 kW 220 kg The AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm Nledpfxowir Dmo Ahksf

Condition: new, Year of construction: 2026, Suitable for Outer pipe diameter Ø 26.9(3/4″) Ø 33.7(1″) Ø 42.4(1_¼") Ø 48.3(1_1/2″) Ø 60.3(2″) Outer pipe diameter for zinc spout Ø 22 - Ø 76 Njdpfoy T Raujx Ahkjlf Advantage: Quick and easy notching Wall thickness (steel): 5 mm Wall thickness (stainless steel): 3 mm Weight: 93 kg Operation: Electric (2.2 kW) Application: Round, square and rectangular tube Easy to operate With the motorized pipe notcher AL1-2U you can notch pipe outside diameters of Ø26.9 (3/4″), Ø337 (1″), Ø42.4 (1 ¼"), Ø48.3 (1 ½"), Ø60.3 (2″) and pipe outside diameters for zinc flow from Ø22 to Ø76. The machine is started at the push of a button and the pipe notcher is driven continuously. This allows the user to continue production without having to switch the machine on every time. Electrically driven With the motorized pipe notcher AL1-2U you can notch pipe outside diameters of Ø26.9 (3/4″), Ø337 (1″), Ø42.4 (1 ¼"), Ø48.3 (1 ½"), Ø60.3 (2″). Do you often notch pipes? Then the motor-driven pipe notcher AL1-2U with 2.2 kW electric motor is the solution for you! The motor forms a single unit with the special eccentric shaft that drives the punching tool. In addition, the motor is equipped with an on/off switch with 0-voltage protection and a protective cap.

Condition: used, Year of construction: 2019, gebraucht 2019 5505 prompt, Zwischenverkauf v Niederlande 2670 € 1 100 x 2.000 mm 20 - 76,1 mm 1 3 kW 190 kg DEMO MACHINE / MINT CONDITION The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. Nledpewiqwljfx Ahkef • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: new, plate thickness max. 5.0 mm tube diameter 27.9 - 61.0 mm motor 400 Volt total power requirement 2.2 kW weight of the machine ca. 93.0 kg. The AL1-2U electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continually work on new parts without having to switch the machine on again each time. Nedpsxaadmjfx Ahkjlf With the electrically driven AL1-2U pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼"), Ø 48.3 (1 ½"), Ø 60.3 (2?). This pipe notcher is also suitable for notching a zinc outlet in round and rectangular metal pipes. You can notch pipe outer diameters of ø 20.0 -60.3. Do you often notch pipes? Then the electrically driven pipe notcher AL1-2U with the 2.2 kW electric motor is just the thing for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with 0-voltage protection and a protective cap. Equipment: - electro-motor pipe notching machine - including notching station for zinc run-out notches - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - operating instructions

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 979 € 1 1/2" 48,3 mm, 2" 60,3 m mm 3 mm 2.5 mm 15 kg Nledpfeyq Su Hjx Ahkjf The AL 2 can be used to notch pipes with an external diameter of 48.3 mm (1 1/2") and 60.3 mm (2"). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 811 € 3/4" 26,9 mm, 1" 33,7 mm, mm 3 mm 2.5 mm 8 kg Nledjyq Svdepfx Ahkof The AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4"), 33.7 mm (1") and 42.4 mm (1 1/4"). The hand-operated machines can be easily wall h ALMI pipe notchers filing or milling pipes has become a thing of the past. The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.

Year of construction: 2023, condition: ready for operation (used), A Herzog two-head square braiding machine is available. Number of carriers 1/2: 12/16, tandem carrier configuration: 8, horn gear diameter: 150mm/200mm, speed 1/2: 175rpm/131rpm, bobbin diameter: 55mm, bobbin height: 130mm, bobbin capacity: 265cm³. Including 2x change gears, 2x double gears, 28x bobbins, 28x thread tension springs, 2x take-off discs, 6x wooden drums, 8x carrier tubes, 2x braiding plates and one carrier guard. The machine has only been operated for a few thousand running meters and is therefore in very good, near-new condition. Documentation available. An on-site inspection is possible. Nodpozqfx Dofx Ahkolf

Year of construction: 2011, condition: used, Used Hauzer Techno Coating HTC-1500/4-SpuUC/2-Spu/1-P coating system for sale, manufactured in 2011. Second-hand industrial coating equipment for manufacturing applications. Industrial system for sale for international buyers seeking used Hauzer coating systems, surface treatment equipment, coating machinery, and manufacturing equipment through an industrial auction. Nodozwfiiepfx Ahkelf

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2433380060, overall weight: 176 kg, nominal power: 0.75 kW (1.02 HP), rotational speed (max.): 950 rpm, protection type (IP code): IP54, The devices in the COLOUR JET series are optimally designed for extracting paint mist and solvents at wet painting workstations. The front guide plate ensures that the mist is captured from below and at the side inlets, as solvents from paints settle and collect near the floor. At the same time, the guide plate enables uniform air distribution over the filter and protects the filter medium from direct exposure. Paint pigments are separated by the large-area replaceable filter, and the cleaned exhaust air is then discharged to the outside via a pipe or hose. Dimensions (W x D x H) in mm: 1,012 x 1,405 x 943 Nedpfx Ahszkgwnokslf

Condition: used, Year of construction: 2023, Used system Year of manufacture: 2023 Condition: As new, only a few operating hours Equipment and technical data: Stationary clean-air filter system ECO JET DUO 6 XL ZRS for extracting wood dust and chips Fans: 2 × 7.5 kWAir volume: 10,000 m³/hNegative pressure: 2,700 Pa (total) / 2,200 Pa (static)80 filters à 2.50 m, BIA Category M, electrically conductive, incl. support cagesFilter area: 77.6 m²Filter surface loading: 129 m³/(m² × h)Filter cleaning: AL-KO OPTI-JET®Pressure relief area: 0.84 m² (bursting discs)Base frame with discharge hopper and rotary valve; dry discharge with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm intermediate section for increasing unit height with 2 suction openings Base frame with discharge hopper and ZRS 960/1 FG rotary valve for chip disposal via on-site transport fan into an existing silo or similar; DN 200 transport pipe, approx. 1,260 mm, connection on site ZRS 960/1 FG Rotary valve: ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (indoor/outdoor); EX D; FSA 11 ATEX 1614XMotor: 0.18 kW / 0.78 A, 3 Ph / 400 V / 50 HzProtection class: IP 54 / B3; Insulation class FSpeed: 41 rpm; Capacity: 15,744 l/h*; 7 cellsInlet/outlet: 960 × 250 / 960 × 208 mmDimensions: 1,100 × 605 × 330 mm; Temperature range: up to 50 °C Further equipment: 400 mm suction connection with non-return flap in rectangular ductECO JET backflow flap 910 × 346 × 500 mm AL-KO Control System ACS II: Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage and integrated frequency inverter for cascade control of 2 fans up to 37 kW Plain-text fault display with common fault lamp; manual discharge start via display button; manual cleaning start via push button; cleaning via differential pressure; post-cleaning; external start via potential-free contact; operating hours counter; maintenance interval display; control cabinet lighting and ventilation; monitoring of fire damper, residual dust sensor, level sensor and max. filter pressure 10 individually controlled solenoid valves 4-group slide control for up to 8 machines: control via potential-free contact (PFK) or induction coil; 24 V DC motorised or electro-pneumatic slide gates; max. 4 panels per conveying line Power section ZRS up to 0.18 kW; time settings adjustable via touchscreen Bursting disc sensor and evaluation unit; pressure transmitter for inverter; pressure switches; warning beacon; 2 × PTC monitoring; rotary valve speed monitoring Exhaust/return air changeover 24 V DC for summer/winter operation Filter monitor/residual dust monitoring with evaluation unit according to DIN EN 12779 and H3: if 0.3 mg/m³ is exceeded, a self-latching alarm is triggered and the recirculation air damper automatically switches to exhaust air 10-way terminal box 24 V/230 V, fully wired for filter cleaning, incl. approx. 6 m cable Pipe system incl. bends, branches, reducers, PU hoses, machine connections, small parts and EP slide gates for extraction of 11 woodworking machines + 1 HRS according to specification Return air according to TRGS 553 with changeover damper and fire damper Galvanised base frame for container loading Paddle switch 24 V–230 V with socket for level indication in the discharge hopper Dimensions: 2,092 × 2,000 × 5,292 mm Inspection possible in assembled condition in 06667 Weißenfels. Nledpfozlbqrsx Ahkof Price incl. dismantling. Availability: Short notice Location: ...

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 8,093 h, load capacity: 3,500 kg, lifting height: 6,500 mm, mast type: triplex, power: 36 kW (48.95 HP), Equipment: cabin, lighting, sideshift, UNiCARRIERS Diesel Forklift - NISSAN YG-1-F-2-A-35-U Year: 2015 Nsdpfx Ahjy Ir Hrjkelf According to hour meter: 8,093 operating hours 3.5 ton lifting capacity 6.5 meter lifting height!! 3 meter overall height 36 kW Nissan engine - Triplex mast with full free lift - Side shifter - Load guard - Cabin with heating - Lighting system - Original paint - Immediately ready for use - Front tires in good condition - Rear tires NEW! - Simple mechanical forklift! Sales price: €10,900 net Affordable delivery available!

Condition: new, Year of construction: 2026, functionality: fully functional, ALMI pipe notcher AL2 for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Pipe notcher for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 15 kg Nedpfjy T N Svex Ahkolf

Condition: new, plate thickness max. 5.0 mm tube diameter 27.9 - 61.0 mm motor 400 Volt total power requirement 2.2 kW weight of the machine ca. 87.0 kg. The AL1-2E electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continue to work on new parts without having to switch the machine on again each time. With the electrically driven AL1-2E pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼"), Ø 48.3 (1 ½"), Ø 60.3 (2?). Do you often notch pipes? Then the electrically driven AL1-2E pipe notcher with the 2.2 kW electric motor is just right for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also Nlsdexaardopfx Ahkef equipped with an on/off switch with 0-voltage protection and a protective cap. Equipment: - electric motor pipe notching machine - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - operating instructions

Condition: new, Year of construction: 2026, Tube Notcher/Grinder AL 100 U ⦁ Grinds at any desired angle ⦁ Grinds any required diameter Nlsdox Irvmjpfx Ahkjf ⦁ Suitable for all standard materials ⦁ Designed for pipes and profiles - Operation via eccentric lever - Grinding belt 100 x 2000 mm - Motor 3.0 kW, 400 Volt, 50 Hz - Speed 2905 rpm - Belt speed 30 m/sec. - For tubes from 20 mm to 76 mm - Weight 200 kg

Condition: new, Year of construction: 2026, functionality: fully functional, ALMI AL-U for zinc spout in pipes with outer diameter from Ø22 to Ø76 mm Pipe notch for zinc spout in pipes with outside diameters diameter from Ø22 to Ø76 mm for cutting out vent slots from round and rectangular metal pipes from rectangular metal pipes from 22 mm outer diameter Nlodpfx Ajy T N S Aohkef Easy to attach to the wall Wall thickness max. 3 mm steel, 2.5 mm VA, weight 7 kg

Condition: new, Year of construction: 2026, Motor: 4 kW Voltage: 230V 3F, 400V 3F or 460V 3F Belt speed: 45 m/s, 4300 r/p Belt dimensions: 100×2000 mm / 150×2000 mm Sanding diameter: Ø20-Ø114.3 Sanding angle: 20 - 90º Operation: Lever and manual wheel operation 2-in-1 pipe grinder The new AL150HS has a belt speed of 45 m/s thanks to its unique gearbox. If you open the tailgate, the pipe grinder can also be used as a belt grinder, ideal for deburring polished profiles. The AL150HS can be operated with two handwheels or with a lever. Both options are available on the machine. With the AL150HS you can grind material from Ø20 to Ø114.3. The cross support and the carriage with rotating clamp are infinitely adjustable. This means that all pipe profiles can be ground at any desired angle from 20° to 90°. The AL150HS from ALMI can be used to process square, rectangular and round pipes with different wall thicknesses and in all common materials. The ALMI belt adjustment system now makes it even easier to adjust the sanding belt using the hexagon key supplied. The sanding belt can be tensioned quickly and the sanding rollers can be changed in just a few seconds. Sanding at high speed Njdjy T N Siepfx Ahkjlf Thanks to new developments, ALMI has been able to achieve a sanding speed of 45 m/s with the renewed AL150HS. This gives the sanding belt a longer service life, as the faster sanding means there is less heat in the material, resulting in less discoloration and fine dust.

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI pipe notcher AL1 for pipes with an outer diameter of Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Nodpfsy T N Spex Ahkslf Pipe notcher for pipes with outer diameter Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 8 kg

Condition: new, Year of construction: 2026, Motor: 4 kW Belt speed: 30 m/s, 2800 rpm Belt dimensions: 100×2000 mm / 150×2000 mm Sanding diameter: Ø20-Ø114.3 Sanding angle: 20 - 90º Nljdsy T N Scjpfx Ahkjf Operation: Lever and manual wheel operation Weight: 260 kg Easy to operate The AL150 can be operated with two hand wheels or with a lever. Both options are available on the machine. With the AL150 you can grind material from Ø20 to Ø114.3. The cross support and the carriage with rotating clamp are infinitely adjustable. This means that all pipe profiles can be ground at any desired angle from 20° to 90°. The AL150 from ALMI grinds square, rectangular and round pipes with different wall thicknesses and is suitable for all common materials. The ALMI belt adjustment system now makes it even easier to adjust the sanding belt using the hexagon key supplied. The sanding belt can be tensioned quickly and the sanding rollers can be changed in just a few seconds. 2-in-1 pipe grinder The AL150 is equipped with a deburring table with which the pipes can be easily deburred, making the pipe grinder multifunctional.

Condition: new, tube diameter 1/4" max. 2" Zoll Nsdpfx Ajv Skzkshkjlf wall strength max. 3,0 mm engine 400Volt / 1,5KW weight 90 kg dimensions 07 x 0,4 x 0,3 m Pipe notcher Maximum wall thickness 3.0 mm Suitable for the following pipes: 1/4", 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"

Condition: good (used), Welding rotary device, container rotary device, welding rotary device, welding rotary device, welding device, welding rotary table, welding rotary device, gearbox, spur gear gearbox, bevel gearbox -Manufacturer: Guso, welding rotary device, container rotary device on a solid base frame -Load capacity: kg Nlodpezkfr Dsfx Ahkof -Control: with handheld terminal and foot pedal -Three-jaw chuck: Ø 400 mm, three-jaw chuck bore Ø 130 mm -Speed: 0-2 1/4 rpm Right/Left rotation -Axles: 1 piece -tiltable: No -Height adjustment: Yes -Transmission: switchable 2 stages -Manufacturer Sawa- Gearbox Type -Translation: 1:1000, 1:2508 -Input shaft: Ø 28 mm -Output shaft: Ø 135 mm -Transport dimensions: 2070/1430/H1520 mm -Weight: 1880 kg